Difficulty to install Windows XP because of the missing HARD drive driver
Hello
I recently bought a P200-1 and I try to install Windows XP instead of Vista.
I bought Windows XP Home Edition. Installation was first arrested for lack of HARD disk drive.
Classic message: «Setup didn't find any hard drives installed in your computer»
I downloaded Toshiba support "Intel Matrix Storage Manager" (pilot: ICH8M_32bits).
The contents of this directory was extracted to the root of a disk.
I restart my PC with XP CD-Rom and floppy drive connected. Setup download SATA AHCI floppy driver (press F6, and then later S key).
The installer can read disks and partitions and offers the choice of a partition for the installation of XP system.
After you have selected a partition, the installation begins and the installation program asks to insert "Intel Matrix Storage Manager" in drive A.
Here's the problem: floppy drive not responding, disk is not read and XP installation stops.
Ask for a second time to insert the floppy is suspect because he thought the driver drive HARD has already been read successfully.
What can I do now?
Thank you for your help
JR
Hello
The problem might be that you have formatted the HARD drive (partition) or created a new partition after the installation of the Intel Matrix Storage Manager.
In this case the formatting removes the driver from the HARD drive.
Another possibility is the use of software called nLite. This software allows to include the SATA driver in the XP installation CD.
Simply search for nLite and you will get lots of useful details.
Greetings and good luck
Tags: Toshiba
Similar Questions
-
Install Windows 7 upgrade on the new hard drive?
I have the Windows 7 upgrade version that I installed last September, but a few days ago my hard drive died. How do we install the version 7 upgrade on the new hard drive without using a previous version of windows on it?
In order to install the Windows 7 upgrade version, you must have a system of eligible operating Windows installed and activated. You cannot install a version upgrade of Windows 7 on a drive blank. The installation procedure you do not insert a Windows disk in the drive for verification, eligible operating system must be installed.
If you do not have a qualification system of operating Windows installed with an activated genuine license, then you can not use the version upgrade of Windows 7 - you would need a license of Windows 7 "full version".
In summary:
1. a Windows operating system to eligible address must be installed.
2. the Windows operating system to eligible address must have a genuine license (product key) and it must be enabled.
3. to upgrade, boot on the eligible Windows desktop, insert the Windows 7 upgrade disc in the DVD player.
4. when the menu appears, select custom (advanced option) to a clean install procedure.You should be able to repair the installation, if your installation one fall. I suggest create you a System Image (backup) of your installation of Windows 7 after installation of Windows 7 in order to spare you the trouble if your computer one fall in the future.
You can work around this two ways, I would suggest that you create a System Image (backup) of your installation of Windows 7 after installation of Windows 7 in order to save you the trouble if your computer loses the system failure or instability. Since you are in possession of a valid license of Windows Vista for this computer, you can use the following method to do a clean install with upgrade support:
http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp
Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP -
Install Windows 7 Pro on the second HARD drive located in Optibay
Hello
I have a 2009 15 "MacBook Pro C2D 2.66 with 8 GB of ram and a 480 GB SSD as my main drive. I will be to install a secondary HARD drive in the optical Bay. I want a 250 GB partition for a boot camp and 750 GB partition which can be read by OS X and Windows. 750Go partition will be used mainly on the side of the OS X to store photos, movies, music and documents but would be like training camp to access incase I need a file or two. I have already twisted boot camp to allow a windows usb installation and wonder what to do next steps are. I have read several forums and it's possible but instructions on the forums seem to be a specific user. Thanks in advance.
1. on your specific Mac, windows should be on the main drive Bay. It will be also problems to start.
2. do not modify the Info.plist Bootcamp and try the USB installation. You spend hours trying and it will fail.
3. you must use the internal optical drive, integrated to install Windows on the main drive Bay.
4. Once Windows is installed and fully functional, you can then replace the Optibay drive.
5. do not throw your optical drive. If you need to repair Windows, you will need to return to the standard hardware configuration.
6. you can have problems even under normal circumstances with a dual Setup, so be prepared for adventures in such a configuration.
-
Satellite A200 - 1 M 8: cannot install Win XP because of the unseen HARD drive
I have this laptop. I want to this laptop Windows XP, but when I do, there is: we can't found any hard in yor computers. What is it? And question 2. Are there for this laptop Windows XP drivers? Thank you very much!!!
Check this box:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040 -
Genuine Windows clean install
Hello
I had a problem with my laptop Acer Extensa 5230th. It was not started and so I took for Matech computers. They diagnosed as having a mechanical drive problem. So they replaced the drive and installed a more recent version of windows vista on. Note: I haven't bought a new copy of vista family premium, he said he was going to reinstall vista. It had windows Vista Home Basic, it has installed vista Home premium and said that he had validated by call from windows, but I'm suspicious because I don't think you can use a base of windows key to validate Home premium! It means that he has put on an illegal version on windows or used the genuine key that came with the laptop.In addition, on computers of brands, if this happens again, how is a technician for legally to reinstall the original windows that it came with the new hard drive? How to install windows vista basic on the new hard drive by using the original key to make it genuine? What windows installation disc would you require? or is it easier to just buy a new copy of windows? I heard that many technicians, prefer to install illegal versions of cracking of windows instead of the customer to buy the new installation of windows.Kind regardsLewisHere are some utilities which displays product key Vista Matech used to activate Windows:
Belarc Advisor: http://www.belarc.com/free_download.html
(He did a good job of providing a wealth of information.
However may not detect a key to office, then try one of the other two below)Also: http://www.magicaljellybean.com/keyfinder.shtml
and: http://www.nirsoft.net/utils/product_cd_key_viewer.htmlPlease do not post your key on this forum, rather checking to see if it matches the key on your laptop, I(Correction: "if it isn't') it will fall sooner or later"Non-genuine"that your key was for another version of Vista so what was installed.
J W Stuart: http://www.pagestart.com
-
My hard drive crashed, so I bought another, an SSD. I installed Microsoft Office 2007 on the new hard drive, but I can't activate it because he said I used the licensed maximum facilities. How can I cancel the office installed on the hard drive crashed, so I can activate it on my new hard drive?
Use for phone activation reactivate:
Microsoft Office Activation number:
http://support.Microsoft.com/kb/950929 -
Original title: new hard drive Blues.
got sata disk hard western digital 500 GB installed, I have tried to download winxp home, got a blue screen
stop: 0x0000007b (0xF78D663c, 0xc0000034, 0x00000000, 0x00000000
I need help
Hi aqm0207,
How you try to install Windows XP Home Edition?
You may receive an error message "Stop 0x0000007B" in the following scenarios:
(a) a device driver that your computer boot controller needs is not configured to start during the startup process.
(b) a device driver that needs your computer startup controller is damaged.
(c) It can also occur if the hard drive in the BIOS configuration is bad.
You can check if the SATA hard drive is correctly configured in the BIOS (Basic Input Output System) & can also update the BIOS. If you are not comfortable to do, you can contact the manufacturer of your computer for help.
Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.
You can also check this link:Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
installed ssd, leave deleted on the old hard drive and now not appearing is not in windows
OK, so I've put an msata ssd 120gig in my t430s and windows install when I was installing I deleted all partitions and everything in the old drive. When I get into windows via the new msata drive the old drive is not to be found and does not anywhere really... How do I get windows to recognize it? do I need to format it?
You may need to reset the player.
-
I had the misfortune I had to replace my hard drive on my Toshiba laptop after reinstalling my Windows 7 Ultimate disc, I find that I am unable
load the Windows Media Center software. When I click on the location of the file, some files are visible, but it does not load.
Can I use the disk window to replace or repair the Windows Media Center files without causing other problems?
Don Winston Hills NSW Australia
Open your Start menu by pressing the Windows key and type FEATURES in the search box. Select 'Windows turn features on or off ". When the Panel opens, expand the category "Media Features" and place a check in the box "Windows Media Center". You may need to restart after Windows reconfigures itself.
-
Satellite A200 - 1 GB - trying to install Windows XP Home edition but without HARD drive?
Hello world!
Recently, I bought a new laptop, Satellite A200 - 1 GB, and after two weeks of fighting against windows Vista I decided to uninstall it and install WXP whose permit, I bought a long time ago.
I restarted my computer with the Windows XP cd to the inside and I start the system with it, but when it loads all the controllers and I proceed with the installation of windows xp, it says that there is no disk (probably) in my laptop.
I hope someone can help me. Someone at - it windows XP installation experience in this laptop model?
Hello
The species has been described several times here in the forum of Toshiba.
Recommend studying a little ;) would use the advanced search option Forum!But because you're a beginner, that I'll try to give some useful advice.
The HARD drive is not visible because you need to first install the Intel Matrix storage controller.
This controller can be downloaded form or another page Toshiba or Intel page.During the installation of XP, you will need to press the F6 key to include this iMSM in the XP installation. You will need an external USB HDD drive to do this.
But if you want, you can build an own XP CD using nLite software and could understand this iMSM in the XP CD again.
Please also check these discussions:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25749 -
Re-install windows 7 home prem on a hard drive replaced
I have a HP probook 4520 laptop computer s which is come with a pre-installed win 7 home prem copy OA 32 bit, when I bought my laptop I was told that I need to reinstall the windows it is possible to simply reinstall without cd or dvd as the copy of windows is saved on the laptop, in any case now my laptop is out of warranty (it just just expired a month ago) and my hard drive crashed, there was no way to get what was in it, so I had to buy a new hard drive, now my problem is, how do I install a new original and an activated copy of windows 7 on my computer, knowing that the only thing that I have now is the sticker on the back of my laptop which has number of authenticity Windows that has been installed on the hard drive dead (the former)? is anyway to do this? Help, please
is it OK to install the copy of 64-bit and not 32 Bit? the product key will work?
I want to install the 64-bit because I need RAM reading entirely, as the 32-bit edition do not recognize fully...The key of Windows 7 works with 32 and 64 bit, but can only be installed at a time.
First, make sure that the 64-bit drivers are available for your computer - check with the manufacturer.
If you are moving to 64 bit make sure that your computer can run 64-bit - you can use the Upgrade Advisor to check:
http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor
Installation and reinstallation of Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
Case of failure of the online activation:
Call Microsoft use the manual phone Activation
Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.
1. open Windows Activation - click on the Start button, right-click computer, click Properties, then click the option to activate Windows now or change your key.
2. click on show me other ways to activate.
3 type your Windows 7 product key, and then click Next.
4. click on use the automated phone system.
5. click on the location nearest you from the drop-down list, and then click Next.
6. dial one of the available phone numbers listed.
7. do not select all options and wait for a person pick up, then explain what happened.
Questions about installing Windows 7?
FAQ - Frequently Asked Questions from Installation Windows 7 & responses -
Cannot install Windows XP on Satellite X 200 - HARD drive not visible
Hello
I don't want Vista on my computer.
But when I want to install xp, which he refuses because he can't find the hard drive. Why?Thank you very much
Best regardsPost edited by: Gourdeaux
Hello
Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=25749
Good bye
-
Satellite Pro L300 - how Windows easy transfer on the new HARD drive?
Hello
I recently got a broken hard drive of a laptop larger than mine.
I would like to put in my computer, but I don't know what would be the way to transfer the partition of installation (or better yet also already installed windows partition).
Will I be able to reinstall linux in a few minutes, but for windows it's something else.
Do you have an idea of the procedure?The best would be to make a mirror copy, or something like that for me, to have just to extend the size of some partitions.
Thank you.
StoneHello
I recommend the creation of an image.
You can create either an image that contains only the content of a partition or the whole HARD disk content.There are different image on the market tools. For the most part, you will pay for this software.
But you can also use an internal utility for Microsoft Windows 7. Its share of the Win 7 system.If you are using Windows 7, I recommend this solution.
Here's a nice page of Microsoft on this tool and how to do it:
http://Windows.Microsoft.com/en-us/Windows7/back-up-your-programs-system-settings-and-files -
Satellite A100 - how to install "Windows XP MCE" on a new HARD drive?
I have a laptop Satellite A100-495. the cd/dvd does not work and I have a new hard drive. Now, I want to install the original os (windows xp professional, mce).
I'm trying to put the files of my original restore on a USB cd but never works and I did not find useful clues in any part of the forum.Is there anyone out there who can help me?
Hi, marawe
It would never work if you just copy the files from recovery Cd on a usb key. You need to make a BOOTABLE FLASH DISK, to do you need an application like Flashbot... Google.
Download and install it, after that you can make a bootable usb key.
You should know that your Bios must support boot with a Usb key, I don't know about your knees. Otherwise, you cannot do so. Hope it worksWelcome them
-
EliteBook 840 2: Procedure for software install OS and HP on the new hard drive
Hello
After a hard drive failure, I got a new hard drive and CDs (one with Windows 10) 2 and 1 with HP Appplication and recovery driver.
I am looking for the procedure correctly reinstall my new hard drive, as if you just plant: with partition drivers and so on... But I've been to find such a procedure on the web.
Could you tell me if there is somewhere? or could you help me by telling me if I should install the operating system first and then the HP software or on the contrary, before you start. Thanks in advance
Hello
Please use the following steps:
1. install the new HARD disk on your computer,
2. start Windows 10 DVD machine. This process will install Windows 10 on your computer,
3. put the second DVD of your computer to install the drivers and tools/software on your computer.
4. run the Windows updates.
Steps 1 to 3 will bring your machine back to factory settings,
Step 4 will bring machine to update.
After that, you can install other software or programs.
Kind regards.
Maybe you are looking for
-
My opinion doesn't pop up each time try to... I even tried to use assistivetouch, but it does not at all. (on my iphone6s +). Although I don't have this kind of problem with my iphone5s... What should I do to make it work? Also, even after I reboot m
-
When I go to a different web server, there is a toolbar at the top ' file and with other functions. " I don't have this toolbar with Firefox. I bought a new printer, I need to conect to Firefox to be able to print. How do the bar and conect the print
-
Missing framedyn.dll file
I missed this file. Can anyone help please?
-
How to connect permanently instead of enter password everytime I open the computer?
How can I stay permanently connected instead of having to enter same password that I opened the computer in the moment?
-
Vista + Flash + SigmaTel = lag?
I'm running on an Inspiron 6400 with Vista Enterprise and the SigmaTel HD Audio (6.10.0.5343 driver). Whenever I had a Flash in Firefox or IE sound late. If there is no sound playback, it can take up to a full second so she could play (the app everyt