difficulty using a secondary paragraph on a selection style

Similar Questions

• I do not understand this statement "It is a good idea to keep track that uses a bunch of Audio channels selected in the arrange window, unless you actively play or record on a software Instrument."

  It's a good idea to keep track that uses a bunch of Audio channels selected in the arrange window, unless you actively play or record on a software Instrument.

  Which no longer applies in Logic Pro X 10.2.3. In old versions of logic, selecting a range with a software instrument automatically would make this instrument in "Live" mode, which means that the instrument has begun to transform any MIDI in sound with a minimum of delay. This direct mode becomes an instrument need CPU power (on a single processor) and peut overload the audio engine. It is a waste of CPU if there is no direct game. Then select an audio track would ensure that No instrument is in direct mode. Now (LPX 10.2.2 or more) in direct mode can be turned on or off on a track, chosen or not - it is the R button on the track header.

• Use of bluetooth, how to copy selected music from my Macbook 2009 to my new iMac

  Using bluetooth, how can I copy selected songs from iTunes in my old Macbook to my new iMac? (It might help us to let you know that I don't buy music from the iTunes store). Thanks in advance for your advice.

  How old is the MacBook? Support AirDrop?  If this isn't the case, then the simplest method would be to use a flash drive to move audio files selected from the MacBook to the iMac.

  

• How to use a secondary control and tab?

  I am the first time using the secondary tab control. I've seen some examples of shipping.

  The purpose of the VI:

  1 termpol1 on: should be on when the mouse is down (for VI without TITLE 4)

  2 termpol1 Off: the mouse is down

  Another screen should come to show:

  3 Process2 on: should be on when the mouse is down (for VI without TITLE 5)

  Off 4Process2: should be on when the mouse is down

  If I click on process On1 a screen should come up from the VI and process 2 then another screen should happen.

  How can I do? How can I create reference to the main VI VI IE 3 Untitled.

  You open the vi FP before insertion of the vi It is by mistake because you will not be able to use overtime to a vi Panel already open so you can remove and move the mention vi Panel of sup and the run method of the vi then you must check the status of the vi to operate inside the void Panel.

• Mouse not active when using the tools I refine my selection

  I have re-installed CS5 on a new computer Windows 10 PC and apply the updates by using the discussion forum contact.

  I open a file of image psd and make a quick selection on a part.

  I hit edge tool refine and move the mouse over the image.

  The mouse pointer turns into a circle with a line diagonally crossing (apparently, saying that the use of the mouse is not allowed).

  My eyebrows raised as I say to myself 'it's new

  I have reset the tools presets and refining tool options... no luck.

  What can I do to benefit from the features of the mouse while using edge tool I refine my selection?

  Thanks for the update.

  You must uncheck "Show the Original" in the refine edge of window and then you should be able to use it.

• Since El Capitan update that I can't use my secondary monitor as a full screen preview on the first and after the effect CC 2015

  Since El Capitan update that I can't use my secondary monitor as a full screen preview on the first and after the effect CC 2015

  I also have this problem. I was told that it is a bug, they work.

• Problem with the paragraph in CS3 mac Styles

  I was wondering if anyone can help. I have a number of documents that have been created with paragraph styles by using a font that has disappeared from my machine. Now when I open my documents they look right. I changed the paragraph style in one of the documents to use a different font and now it looks fine, but all my other documents look bad. Is there anyway to set all my documents to use the updated paragraph style or will I have to change them all manually?

  There are several ways to go with this. We need to put all the files in a book,

  temporarily and being one with the correct as style definition the value the

  source, and then synchronize the paragraph styles. This will change all THE styles

  with the same names across all documents and add styles

  are present in the source, but not in any other files, so it's a bit

  risky, especially if any models are based on or [base

  Paragraph] itself is used in one of the files, and it is not already defined

  exactly the same thing in all the files.

  You can also open any file and go to the paragraph Styles Panel menu and

  Choose the command charger load styles, and then select the style you want to load, and how

  dealing with conflict (incoming use), which will give you more control over what

  is happening.

  Or whenever you open a file and get the warning of missing fonts, you can go

  Find font and select the missing font, then pcik your substitute, check the

  redefine the styles box, and then click all change. It would be probably the best

  choice since it is not the style names to make the correct changes.

• Having difficulty using the quick selection tools to remove the images of background form. Any help appreciated

  Hi all

  I try to remove the background from images using 3 different selection tools.  I'm going fine, but eventually the images together ceases to be caught than ever the tool I use.  It is easier if you use a pro version of photoshop and not all versions of elements?  I have 11 items.

  Thank you

  -Deby

  You are welcome. If this does not work for you, consider using a mask. The goal is to preserve the foreground and hide/remove the background...

• Paragraph catalog not selected text code

  I just loaded 12 Framemaker and noticed the paragraph catalog indicates is no longer the used tag when I select the text in the documents. I can't find an option to enable this. Any ideas?

  What version of FM12 point? The latest patch brings it up to 12.0.4p445. The development of catalogue of the name of the tag to the location of the cursor was introduced only with the 12.0.3 patch.

  Note: you must load the patches in the order.

• Using the CD/DVD drive on an iMac used as secondary display

  I'm buying a new iMac and use my current iMac as a second screen.  My current iMac has a CD/DVD player and I am curious to know if I can visualize and burn on this drive, even if this computer will be set up as a secondary screen... Thank you

  It is not that it is possible. Use your iMac as a display with the target - Apple Support Display Mode

• I amhaving great difficulty using outlook, it says unable to connect to dub002. don't understand... help

  I can not Outlook.  I had a hard time since I changed my Hotmail.  Now cannot get into my email at all.

  You use a shortcut that points to a server that is pulled down.

  Open your browser and type mail.live.com in the address bar, sign in to your account. When your Inbox open, right-click on an empty part of the page and select create shortcut.

  Close again to the bottom of your browser, then try the new shortcut on your desktop. If it works, you can delete the old shortcut that does not work.

• Can I use my secondary drive with operating system installed only on the primary drive?

  I want to install simulator FSX on my secondary drive, I heard that it will pick up the pace. I install Win 7 on my secondary drive in order to make it work?

  Primary-Seagate Barracuda 1 TB Win7

  Secondary-WD VelociRaptor 10000 RPM

  Thank you

  Noobie

  I run my sim card on a Sharp 70 "Led 1920 X 1080 p, its so rude, but I like it. I recently got the GTX 590 to find FSX hate double GPUs.Another lesson learned the bad sense, lol. (soon gtx 680)  Also I saw FSX does not play well with the RAID. The sim card is dependent on almost all CPU but with mem cpu and mobo upgrades I should;(better!) See a significant difference. I see a drop in FPS on such a large screen, are there tips to improve?

  Thanks a lot for your answer.

  (24 gb 1866 mhz mem, Asus p6t7 Mobo, intel i7 975 happen soon.)

  Oh yes, I am running an i7 - 2600 K on an Asus P8Z68-V mainboard with memory 32 GB GSkill, Yes, I use a lot of memory, but my performance is excellent, no bottle no necks here. I read that my favors 1600 MHz cpu, with a card mother dual channel is to have triple or quadruple channel about the latency of memory and cache. I think you should run an i7 - 2600 k or even an i7 - 3770 k and at least a card mother with a Z68 or better (Z77) chipset, I also think that FSX could benefit from the technology of fast storage Intels. In addition, I think you should consider at least a 32nm, otherwise a 22nm CPU. Sandy Bridge or Ivy Bridge CPU are pretty hard to beat. I use my system for games, photo editing and a few VMs running via VMware 8.0 and I'm quite satisfied with the overall performace, with 32 GB of memory, I'm not even under a swap file. In any case, you need to re - consider your choice of material. I have always a way to upgrade with my CPU, hard drives and the GPU.

• Need help with the use of GROUP BY in a select statement UNION

  I am writing a query that allows to combine a legacy system that interfaces it is trial balance in the Oracle of R12 GL.  It was only meant to continue for a month or two, but it is likely to continue for 6 months. Please Auditors Auditors, to provide proof that the system is in balance with Oracle GL.  By my verification requirements, I need to make a full reconciliation from the month of conversion (life in the amount of date), then PTD for each month. 

  The legacy account is placed in attribute1 on the lines of the journals. Uses of the old system balancing segments that are also used on the platform in Oracle for this division, i.e., Procure-to-Pay has been cut over Oracle, but not everything yet.  So, I can't count on the GL_BALANCES table for the info, I get from the JE_LINES.

  My problem is not the only request for the month.  But when I try to combine the queries with a Union, to aggregation of each measurement period in its own column, the group is necessary after each selected instruction rather than allowing me to put at the end of the UNION.  (When I put the group by at the end of the UNION, I have the 'not one group' function)

  So I get duplicate for each month of discrete measure accounts. When I duplicate in my Oracle database accounts, I can't count on the VLOOKUP function in excel to exactly match an account of inheritance.  I know there are more sophisticated ways to provide this output, but I'm hoping to get this info in a simple query.

  Thank you in advance for any advice you can provide

  Example of data output (the goal for me is to get the two rows to appear as one based on common points on the LEGACY_ACCOUNT and the ORACLE ACCOUNT

  The LEGACY ACCOUNT	ORACLE ACCOUNT	JUN_15	JUL_15	AUG_15	SEP_15	OCT_15	NOV_15	DEC_15
  010000001109000003584	190-600552-1001-100231-000-0000-0000-0000	0	0	-242961.04	0	0	0	0
  010000001109000003584	190-600552-1001-100231-000-0000-0000-0000	0	192588.02	0	0	0	0	0

  Here is a simplified version of my code that returns both records.  In my research, I had found a number of conversations where it has been shown that the group could be put at the end of the select statement.  However, when I remove the group from the first select statement I get SQL error: ORA-00937: not a function of simple-group

  Select

  l.attribute1 LEGACY_ACCOUNT,

  C.SEGMENT1: '-' | C.SEGMENT2: '-' | C.SEGMENT3: '-' | C.SEGMENT4: '-' | C.SEGMENT5: '-' | C.SEGMENT6: '-' | C.SEGMENT7: '-' | COMBINATION OF C.SEGMENT8,

  JUN_15 TO_NUMBER('0').

  JUL_15, sum (NVL(l.accounted_dr,0.00)-NVL(l.accounted_cr,0.00)),

  TO_NUMBER('0') AUG_15.

  TO_NUMBER('0') SEP_15.

  TO_NUMBER('0') OCT_15.

  TO_NUMBER('0') NOV_15.

  DEC_15 TO_NUMBER('0')

  Of

  b GL.gl_je_batches,

  GL.gl_je_headers h,

  GL.gl_je_lines l,

  GL.gl_code_combinations c,

  GL.gl_je_sources_tl j

  where b.je_batch_id = h.je_batch_id

  and h.je_header_id = l.je_header_id

  and l.code_combination_id = c.code_combination_id

  and h.je_source = j.je_source_name

  and c.segment1 ('190 ', '191', '192', '193', '194', ' 195 ', ' 196',' 197', ' 198 ', ' 199',)

  ('200 ', '203', ' 205', '206 ', '330', '331', '332',' 333 ', ' 334',' 335', ' 336 ', ' 337')

  and j.language = 'en '.

  and h.PERIOD_NAME ("JUL-15'")

  Group

  l.attribute1,

  C.SEGMENT1: '-' | C.SEGMENT2: '-' | C.SEGMENT3: '-' | C.SEGMENT4: '-' | C.SEGMENT5: '-' | C.SEGMENT6: '-' | C.SEGMENT7: '-' | C.SEGMENT8

  UNION

  Select

  l.attribute1 LEGACY_ACCOUNT,

  C.SEGMENT1: '-' | C.SEGMENT2: '-' | C.SEGMENT3: '-' | C.SEGMENT4: '-' | C.SEGMENT5: '-' | C.SEGMENT6: '-' | C.SEGMENT7: '-' | COMBINATION OF C.SEGMENT8,

  JUN_15 TO_NUMBER('0').

  TO_NUMBER('0') JUL_15.

  AUG_15, sum (NVL(l.accounted_dr,0.00)-NVL(l.accounted_cr,0.00)),

  TO_NUMBER('0') SEP_15.

  TO_NUMBER('0') OCT_15.

  TO_NUMBER('0') NOV_15.

  DEC_15 TO_NUMBER('0')

  Of

  b GL.gl_je_batches,

  GL.gl_je_headers h,

  GL.gl_je_lines l,

  GL.gl_code_combinations c,

  GL.gl_je_sources_tl j

  where b.je_batch_id = h.je_batch_id

  and h.je_header_id = l.je_header_id

  and l.code_combination_id = c.code_combination_id

  and h.je_source = j.je_source_name

  and c.segment1 ('190 ', '191', '192', '193', '194', ' 195 ', ' 196',' 197', ' 198 ', ' 199',)

  ('200 ', '203', ' 205', '206 ', '330', '331', '332',' 333 ', ' 334',' 335', ' 336 ', ' 337')

  and j.language = 'en '.

  and h.PERIOD_NAME ("AUG-15'")

  Group

  l.attribute1,

  C.SEGMENT1: '-' | C.SEGMENT2: '-' | C.SEGMENT3: '-' | C.SEGMENT4: '-' | C.SEGMENT5: '-' | C.SEGMENT6: '-' | C.SEGMENT7: '-' | C.SEGMENT8

  order by 1

  Is there a good reason to make this period both as a series of trade unions?  This looks like a classic pivot for me query.  This will make a way through the tables and should get the desired results.

  Select l.attribute1 legacy_account,

  c.Segment1: '-' | c.Segment2: '-' | c.segment3: '-' | c.segment4: '-' |

  c.segment5: '-' | c.segment6: '-' | c.segment7: '-' | combination of c.segment8,

  sum (case when h.period_name = 'JUN-15'

  then nvl(l.accounted_dr,0.00)-nvl(l.accounted_cr,0.00)

  otherwise 0 end) jun_15,.

  sum (case when h.period_name = 'JUL-15'

  then nvl(l.accounted_dr,0.00)-nvl(l.accounted_cr,0.00)

  otherwise 0 end) jul_15,.

  - and similar to DEC - 15

  GL.gl_je_batches b, gl.gl_je_headers h, gl.gl_je_lines l.

  GL.gl_code_combinations c, gl.gl_je_sources_tl j

  where b.je_batch_id = h.je_batch_id

  and h.je_header_id = l.je_header_id

  and l.code_combination_id = c.code_combination_id

  and h.je_source = j.je_source_name

  and c.segment1 ('190', '191', '192', '193', '194', '195',' 196', ' 197',

  '198 ', '199', '200', '203', '205' ', 206',' 330 ', ' 331',

  "332 ', '333', '334', '335',' 336 ', ' 337')

  and j.language = 'en '.

  and h.period_name (' Jun-15', ' 15 JUL', ' AUG-15'... "" ")

  L.attribute1 group,

  c.Segment1: '-' | c.Segment2: '-' | c.segment3: '-' |

  c.segment4: '-' | c.segment5: '-' | c.segment6: '-' |

  c.segment7: '-' | c.segment8

  If you're on the 11G version of the database, you might want to look at the PIVOT keyword that will do the same thing in a more concise expression.

  John

• Using a variable in an Insert / Select

  Oracle 11 g 2

  It is a block of the size of the code. I want to use a variable in the clause values an Insert / Select using the execute immediate statement.

  g_sysdate date := sysdate
  

  I can't ' use sysdate directly because it is a long-term process. We attribute sysdate to g_sysdate at the beginning of the procedure and we stored in several tables. Therefore, it has the same value everywhere.

  I'm getting ORA-00904: "G_SYSDATE": invalid identifier

  create table usa.work_time
  ( id number ,
    work_status_id number ,
    work_task_id number ,
    txt_msg varchar2(255)
  )
  /
  
  create table usa.work_time_arc
  ( id number ,
    work_status_id number ,
    work_task_id number ,
    txt_msg varchar2(255),
    archived_dt date
  )
  /
  
  insert into usa.work_time values(1,2,3,'hello');
  
  commit ;
  
  DECLARE
     v_query varchar2(2000);
     g_sysdate date := sysdate ;
     v_tbl_arc varchar2(61) := 'usa.work_time_arc';
     v_tbl_src varchar2(61) := 'usa.work_time';
     v_tab_cols varchar2(2000) := 'id,work_status_id,work_task_id,txt_msg';
     v_id number := 9521;
  BEGIN
     v_query := 'insert /*+ append */ into '||v_tbl_arc || ' (' || v_tab_cols || ',archived_dt)' || 
                                'select ' || v_tab_cols || ',g_sysdate from ' || v_tbl_src || 
                             ' where id = :id';
     dbms_output.put_line(v_query);
     
     execute immediate v_query using v_id ;
  END ;
  /
  
  ERROR at line 1:
  ORA-00904: "G_SYSDATE": invalid identifier
  ORA-06512: at line 14
  
  
  
  

  That should do it.

  DECLARE
     v_query varchar2(2000);
     g_sysdate date := sysdate ;
     v_tbl_arc varchar2(61) := 'usa.work_time_arc';
     v_tbl_src varchar2(61) := 'usa.work_time';
     v_tab_cols varchar2(2000) := 'id,work_status_id,work_task_id,txt_msg';
     v_id number := 9521;
  BEGIN
     v_query := 'insert /*+ append */ into '||v_tbl_arc || ' (' || v_tab_cols || ',archived_dt)' ||
                                'select ' || v_tab_cols || ',:g_sysdate from ' || v_tbl_src ||
                             ' where id = :id';
     dbms_output.put_line(v_query);  
  
     execute immediate v_query using g_sysdate, v_id ;
  END ;
  /
  

• How to use the result of widget radio selection to 'show' a text box?

  Hello again,

  I have a question about widgets.

  What I want to do is to take the result of radio button widgets (in this case 1 2 rather long sentences that were available) and which will display a text box on another screen.

  Background: I have a series of slides where I ask the questions of the learner through Radio button widgets and so I get a number of variables (= penalty) they choose.

  The question I have is that I want to display all the choices they made on 1 page. Because the possible answers are relatively long I have run out of space if I simply inserts

  variables to shown as such and/or the police gets too small.

  So my idea is to use the answer that they choose to make a text box with a shorter version of the same appearo of sentence on this slide 'results '.

  So my idea is to have the learner to make their selection, then use a tip action to check what answer (= the option button), they clicked on.

  What I would do through "If XYZ variable ' 'contains (a keyword of the long sentence)' then 'show textbox YZ' etc.

  Question 1: Is this the most simple/more convenient way or I can save me time somwhow?

  2 "contain" a medium of action adv. the exact text or it may be just one of the words (out of the long sentence that could be selected)? I ask because then I have to use the same long exact phrase in the NOA that seems awkward.

  3. I need to create a separate fast action for each radio widget, I've used. Is this correct?

  4 if I then say 5 adv. actions for different questions, I asked what should trigger these advanc. action? The goal is just to shorten the long sentences in the selections made?

  If I use ' enter' for all the screen I just started one, I haven´t?

  Many probably incorrect assumptions, on my part, I guess...

  Any help is greatly appreciated!

  In my example the var who will get the short sentence is v_class. It's always the variable associated with the interaction of radio buttons. You have as much of these variables to be inserted on the last slide you have interactions button radio please never enter the variable to insert, but use the X button in the role of composition of the properties panel for the text container. Variables are case sensitive, in this way, you will avoid typos.