Digital fax put in place in the web server integrated shows "invalid entry".

Similar Questions

• What is the web server integrated for Windows XP Professional?

  Hello

  I would like to know what the web server integrated for Windows XP Professional.

  I don't know of a free web server like Apache or IIS.

  I want to host my site on the net using the web server integrated in XP (not IIS).

  Thanks in advance.

  It is not just any server web, other than IIS, integrated with Windows XP Professional.

  You think perhaps of Personal Web Server (PWS) which was part of the old operating systems like Windows NT.  Which no longer exists in Windows XP Professional - it has been replaced by IIS.

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• Restrict the web server integrated for listenling only on the local Interface

  I installed the CF with the built-in web server (port 8500). Now, I have to use IIS for the Web site and the web server integrated for administration of CF.
  How to configure the web server CF-Administration, it allows connection only (unrestricted firewall on port 8500) localhost?
  
  Thank you

  Try to set the following attributes in the WebService of the for the server's jrun.xml file:

  127.0.0.1
  127.0.0.1

  Ted Zimmerman

• I can\ to connect to the web server integrated on my D7460?

  Hello

  I had some problems with my Photosmart D7460 printer and resolved (for now) most of them.

  Except that I can't connect to the built-in web server. Also, I do not get a response when I try and ping the printer.

  Giving to think I have problems of network with the exception that I can print to this printer... Well well, from most of the computers on the network, but that's another story.

  I checked what the said road IP address he gave to the printer.

  Any suggestions would be welcome.

  OK, I seem to have solved the problem.

  I'm not sure that bit of material, it was causing the problem but it seems to come form tries to use "WPA & WPA2" parameters (BT Home Hub 3.0) wireless access point.

  Who having spent 'WPA only' I can now ping, print and connect to the web server.

• Set up Windows Live Mail on your laptop. I want to put in place on the enamel of my laptop but I do not have to configure settings.

  I have a student email account that goes through Windows Live. I want to put in place on the enamel of my laptop but I do not have to configure settings. Where can I get this information?

  If it's an Outlook Live account, see here: access your account using IMAP or programs email POP

  Otherwise, you must contact the Helpdesk of the institution or the Web site to find out how to set up your account in your e-mail client. You don't tell us what e-mail program you use.

  Noel

• Back to the same place of the web page

  When I click on the arrow to the left happens to me on web page, I was ahead, but there also go to the top of the page, but not to the task, I was working, so I have to scroll down to this place. How can I get back to this place on the web page?

  Three ways:
  1. click the link
  2 {Ctrl + click} link
  3. right click on the link and use open link in a new tab

• [INS-06006] Connectivity SSH without password do not put in place between the following nodes.

  Hello

  I'm currently building the cluster by RAC 11 GR 2. I try to install Oracle Grid Infrastructure Oracle Linux 6.4 (x86_64bit) machine - node1.abc.com.

  I'm at the stage of the "Cluster Node Information" where I have to provide me with the list of nodes to be managed by the Oracle grid Infrastructure. Currently I have added just me - node1.abc.com with the name of the virtual IP address - node1 - vip.abc.com. The two host name and virtual IP addresses are registered on the DNS server - it is also installed on node 1. Before adding the second node2.abc.com, I was testing SSH connection but it fails. I clicked the [SSH_Connectivity...] button and in the OS Username (grid) and his password. When I press the [Setup] button, it pops up message successful "Able to establish connectivity SSH without password between selected nodes." But when I click on the [Test] button or the [next] button, I get error - ' connectivity [INS-06006] SSH without password, do not put in place between the following nodes: [node 1].» What is the problem and what exactly to do to avoid this error?

  
  

  Thank you
  

  It was because I assigned a real static IP address for the second NIC eth1. With this affected YES wouldn't let you go to the next screen. So I had to remove NIC out of my laptop. But if eth1 is not resolved by the DNS name it also gives you errors. So I guess a correct functioning is I would sign up eth0 and eth1 to the DNS server but eth1 does not have real IP. Then I could go to the next screen.

• run the Web server in vmware

  Hello
  I run the Web server in the os(xp pro) host and now I want to run the Web server in the guest operating system
  I put things in the host operating system, follow
  router setting page (shared ip settings page)
  1 DHCP using OFF
  2 DMZ host server using on 192.168.10.201
  3. setting of virtual server 192.168.10.201 port TCP port internal external port 81 81
  TCP/IP
  1 use the following IP 192.168.10.201
  2 gateway 192.168.10.1
  3. the DNS settings of
  4. on the Advanced tab > Internet connection sharing > VMware Network Adapter VMnet 8
  for now, when someone tries to access my WAN IP then page host server is apear (from external network)
  If I stop server Web host then cannot access my WAN IP

  and in VMware, I put the (Windows XP Pro)
  TCP/IP configuration
  1 use the following IP 192.168.88.201
  2. default gateway 192.168.88.2
  3. the DNS settings of
  4. click the guest OS tab and click Edit > virtual network editor > NAT VMnet host is VMnet8
  5. setting NAT > Port forwarding > Add >: host port 81 machine virtual ip address 192.168.88.201 port 81
  and at the moment access to 192.168.88.201 in the guest operating system is ok the page is apear
  but nothing is apear when try and access my WAN IP external network and if I start it the host Web server then the host page is apear that im is not the intention of
  How can I make the Web server of the guest to access other networks operating system?
  in the guest operating system, I can access Web server of the customer by access 192.168.10.201
  but I can't access Web server of the client by typing host operating system access the 192.168.10.201
  any ideas? My version of vmware's vmware-workstation - 6.5.2 for windows

  Hi Teayun,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to VMware and would be better suited to the VMware or TechNet community. Please visit the link below to find a community that will support what ask you

  http://www.VMware.com/support/
  http://TechNet.Microsoft.com/en-us/default.aspx Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• WANT to 114 does not connect to the Web server

  Have installed a 114 WANT, everything works except for the webservices - wireless eprint etc.

  I tried everything-

  1 re-install services - error cannot connect to the web server

  2. Update - error cannot connect to the web server

  3 give the static IP address

  4 restore the default settings

  I have an internet connection on all computers.  Can someone give me a hint on how to get Web services to work?

  Hi sbenzie,

  How your printer is currently connected to the network? Via Ethernet or wireless? What is your current router / network configuration? That shows your printer because it is the IP address? What happens when you try to launch applications?

  Not yet given the information above, here's what I would try.

  I suggest to reconnect the printer to the network by running the Wireless Setup Wizard and attempt to restart the web services. If this is not enough, you may change some DNS settings in printers EWS (built-in web server) to do this, put the IP address in a browser window on your PC.

  This should start the integrated Web server. In SAP, select the network on the network tab, select 'network '.

  Then select "network address" (IP). Do not change the IP configuration at the top. Go down under "DNS address configuration"and select 'Manual DNS server'. " Under manual DNS server, enter (an 8 in each box on the first line) 8.8.8.8 and 8.8.4.4 on the second line. Press the button 'Apply' at the bottom.

  Now try to connect to Web Services again.

• External HTTP > internal to the web server

  Hello

  I have a router ADSL with a public IP assigned, preforming NAT. This leads to a 506th PIX which leads to a Web server. The entire interior of the ADSL is on private IP addresses.

  I want to allow external users access to the Web server on port 80.

  I inwardly and outwardly put up ICMP connectivity (for testing only) and it works correctly.

  I created a virtual server on the ADSL router that forwards port 80 traffic to the external interface of the web server. It has worked successfully for half an hour and then something in the config changed PIX and it no longer works. Here is my config PIX

  SH conf

  : Saved

  : Written by xxxxx at 08:41:10.001 NZST Thursday, October 13, 2005

  6.3 (4) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  enable the encrypted password xxxxxxxx

  xxxxxxxxx encrypted passwd

  hostname PIX

  domain ciscopix.com

  clock timezone GMT

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  icmp protocol error correction

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  no names

  name 192.168.5.3 PixExt

  name PixInt 192.168.6.1

  name 192.168.5.1 ADSLInt

  name 192.168.6.2 WebExt

  acl1 list access permit icmp any any echo response

  access-list acl1 allow icmp all once exceed

  access-list icmp permitted acl1 everything all inaccessible

  acl1 list access permit tcp any host 192.168.6.2 eq www

  pager lines 22

  opening of session

  timestamp of the record

  Record being buffered memory errors

  logging trap notifications

  ICMP allow all outside

  ICMP allow any inside

  Outside 1500 MTU

  Within 1500 MTU

  external IP 192.168.5.3 255.255.255.0

  IP address inside 192.168.6.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 192.168.6.2 255.255.255.255 inside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  NAT (inside) 0 192.168.6.0 255.255.255.0 0 0

  Access-group acl1 in external interface

  Route outside 0.0.0.0 0.0.0.0 192.168.5.1 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  http 192.168.6.2 255.255.255.255 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd lease 3600

  dhcpd ping_timeout 750

  xxxxx xxxxxxx privilege 15 encrypted password username

  Terminal width 80

  Cryptochecksum:xxxx

  DMZInside (config) # route sh

  outside 0.0.0.0 0.0.0.0 192.168.5.1 1 ANOTHER static

  outside 192.168.5.0 255.255.255.0 192.168.5.3 1 static CONNECTION

  inside 192.168.6.0 255.255.255.0 192.168.6.1 1 static CONNECTION

  DMZInside (config) #.

  No idea where I have gone wrong?

  Thank you.

  you are missing this statement

  public static 192.168.6.2 (Interior, exterior) 192.168.6.2

  Thank you

  Nadeem

• Unable to connect to port 80 on the web server on host Ubuntu guest

  I have a very strange problem. I've been running a VM of 14.04 Ubuntu on my MBP under VMware Fusion for some time. I have re-installed Yosemite during the weekend for a clean installation trying to solve some of the problems I had. I now have my Ubuntu VM up and running. All right, except that I can't hit the web server on the virtual machine.

  I can access the virtual machine in a variety of different ways!

  • Ping: I can ping
  • SSH: I can ssh in
  • psql: I can connect to the database remotely via port 5432
  • NFS: can I get the files of the virtual machine files on my hard drive
  • Tomcat: I can access my web application directly through Tomcat on port 8080

  When I do a scan of port of the virtual machine, I get this:

  Port scan started...

  Host port scan: 10.39.186.13

  Open TCP Port: 22 ssh

  Open TCP Port: 111 sunrpc

  Open TCP Port: 389 ldap

  Open TCP Port: 2049 nfsd

  Open TCP Port: 5001 commplex-link

  Open TCP Port: 5432 postgresql

  Open TCP Port: 8000 irdmi

  Open TCP Port: 8080 http-alt

  Open TCP Port: 8104

  Open TCP Port: 37805

  Open TCP Port: 41301

  Open TCP Port: 42060

  Open TCP Port: 55224

  Open TCP Port: 60974

  Port scan has completed...

  Port 80 is not even there. The virtual machine itself, I can access the site via port 80:

  wget xnat@xnatdev:~$ http://xnatdev.wurstworks.com

  -2015-06-22 11:20:50- http://xnatdev.wurstworks.com/

  Resolution xnatdev.wurstworks.com (xnatdev.wurstworks.com)... 127.0.0.1

  Connection to xnatdev.wurstworks.com (xnatdev.wurstworks.com) | 127.0.0.1 |: 80... connected.

  Query HTTP sent, awaiting response... 302 Found

  Location: http://xnatdev.wurstworks.com/app/template/login.VM;JSESSIONID=18A2C3A7C7AB6A63F39F7AC49E54FCD4 [next]

  -2015-06-22 11:20:50- http://xnatdev.wurstworks.com/app/template/login.VM;JSESSIONID=18A2C3A7C7AB6A63F39F7AC49E54FCD4

  Reuse an existing connection to xnatdev.wurstworks.com:80.

  Query HTTP sent, awaiting response... 200 OK

  Length: unspecified [text/html]

  Record on: 'index.html '.

  [ <=>                                                                                         ] 12,818      --.-K/s   in 0.001s

  2015-06-22 11:20:50 (11.2 MB/s) - 'index.html' saved [12818]

  But the host OS, I get this:

  wget rherrick@Aerys:~$ http://xnatdev.wurstworks.com

  -2015-06-22 11:21:50- http://xnatdev.wurstworks.com/

  Resolving xnatdev.wurstworks.com... 10.39.186.13

  Connection to xnatdev.wurstworks.com | 10.39.186.13 |: 80... has failed: connection refused.

  I tried switching between NAT and open networking (I know that I had to work with NAT before, but I'm willing to try anything at this point).

  I'm on OS X 10.10.3 and the most recent, and VMware Fusion 7.1.2. Any ideas on how to get this working would be greatly appreciated!

  OK, got it market. The issue was the listen directive in configuring nginx for connecting Tomcat. I'd put it domain name FULL and port 80 on the server, but something I did is the determination of the FULL domain to 127.0.0.1 instead of the IP DHCP-published name. If this does not work because the incoming request has been the full domain name of host configured in my/etc/hosts, OS, then nginx not pair together configuring nginx for the domain since listening has been screwed up.

• Difference in the gateway.properties file when you access of PIA and the opening of the PSIGW folder in the domain of the web server

  Hello

  When I open the file gateway.properties by ITTO's domain\application\peoplesoft\psigw web server directory, I see certain values that are not the same, when I open the file gateway.properties of PIA by navigating to Peopletools-> Integration Broker - > gateway configuration-> gateway.properties file. I tried to clear the web server cache, restart the web server. Even then, I see quite different values of these two places. If I do any change in one of the two places, his not reflecting only with access to another place.

  Could someone delete the following point?

  -I think there is only a file gateway.properties under the web server's domain. When access us the PIA file, wherever to be included in?

  -Is the file stored somewhere in the database as well? where it recovers when PIA accesed?

  -The two are always in sync from different modes?

  -How to synchronize these two?

  Thank you

  Dinkar

  There is only one file per domain. It is read by a web service call when you view it in the PIA. This allows you to edit files from another server. The only time they will be different, that is if the URL of your entry point to a server other than the local server.

  If the URL of your entry points to the same server as your local file, then the only advantage to use the PIA to modify the file (except easy access), it is that sometimes it will update the properties in memory. Change the file in the file system requires to restart the web server for the properties to reload in memory.

• How can I download my blog on the web server using DW?

  I need add custom on my blog domain and transfer it to the web server. can someone help me. any help kindly appreciated...

  [link removed by the host of the forum]

  my website is a blogspot. However, there is no database... I have the .mu domain so I need to add this domain. Transfer to web server... Travel destinations | Natural world | Travel better Places. Natural wonders | Travel guide

• Force the url of the web server to hit the (slot) instance particularly jboss

  Is there a way we can force the url of the web server to hit the (slot) specific jboss instance? I remember that we can do in DAS from the drp port in the url of the Web server.
  
  Published by: 865729 on June 20, 2011 01:30

  This isn't the best forum for this question (you could get better results this announcement to the unduly JBoss: [http://community.jboss.org | http://community.jboss.org]), but I think that you can accomplish this by putting a dummy jsessionid in URL (at the first application so there is no jsessionid) and adding the jvmroute of the instance you want to hit. The jvmroute is what determines what roads of mod_jk instance demand so, theoretically, this should work.

  -George

• Error video files uploaded to the web server

  Hi all. I get an error when I transfer my project on the web server. Everything works fine on the spot. I have a video that should play upon creationcomplete. When I run at the local level, no matter where I put the. FLV file and addjust the path accordingly, it works fine. For now, I put the FLV file to the root. All image paths work fine. But when I put the server, I get an error. I use mx:VideoDisplay. Following is the display code and the error message when I click on the play button. Do I have to do the code all ActionScript NetConnect and NetStream? Is there a MIME type that I need them to put it on the server? Thank you.
  
  I found this in the Docs, but it's not exactly my mistake. I ask the hosting company to consider.
  http://KB.Adobe.com/selfservice/viewContent.do?externalId=tn_19439 & sliceId = 2
  
  The hosting server is Windows 2003 IIS 6 and see the URL is:
  http://www.mediatransferplus.com/MTP.html
  
  My Code:
  < mx:VideoDisplay id = "video1" source = "ComfortablyNumbFirstSolo.flv"
  autoPlay = "true" horizontalCenter = red "8" = "51" visible = "false".
  width = "328" height = "218" / >
  < mx:Button x = "10" y = "518" label = "Play" click = "video1.play ()" / >
  
  
  The error Code:
  
  Error: 1000: cannot connect to the server or to find FLV on the server.
  to mx.controls.videoClasses::VideoPlayer/play() [E:\dev\flex_3_beta3\sdk\frameworks\projects\ framework\src\mx\controls\videoClasses\VideoPlayer.as:1325]
  at mx.controls::VideoDisplay/play() [E:\dev\flex_3_beta3\sdk\frameworks\projects\framework\sr c\mx\controls\VideoDisplay.as:1462]
  to DPW / ___MTP_Button1_click ([C:\Inetpub\wwwroot\MediaTransferPlus\src\MTP.mxml:141])
  

  It was a missing MIME type.

  video/x-flv for the .flv extension must be defined on the server. Who did.

  See you soon!