Direct addition ASA at the CSM

Similar Questions

• Direct Media starts when the computer is on turn off

  Original title: Media Direct

  My Media Direct launches only when the computer is turned off. I have Vista Home Addition. When I turn it on, it will not start... Help, please!

  Hello

  1. you receive error message with media direct?

  2. it worked earlier? If so, remember you make changes to your computer before this problem?

  3. are you referring to Dell Media Direct?

  Try the suggestions only if you are using Dell Media Direct

  You can visit this link and check if it helps: http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_330711&isLegacy=true

  You can also post your questions in the dell forums by following this link: http://en.community.dell.com/support-forums/laptop/default.aspx

• a way vpn with asa to the 800 router

  people

  I have a site to site vpn set up between a asa 5540 and a 800 router

  I want only the vpn to be initiated from the asa with the 800 remote listen incoming connections

  I know that I can define the type of connection on the asa as only come but I can find an equivalent command to answer only for the 800 remote

  can anyone point me in the right direction or is it enough to simply configure the asa as are created only for this encryption card

  Thanks to anyone who takes the time to answer

  Hello

  I recommend you configure the tunnel as a dynamic to static tunnel VPN, the ASA will be the static counterpart, so it will be the initiator and the router will never be able to establish the connection.

  The ASA will be a common L2L configuration, but the router will use a dynamic encryption card.

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a008051a69a.shtml

  The PIX in the example is old, then you can simply adjust the controls to your current version, the important thing is to understand the concept.

  Please let me know if that answers your question,

  Thank you.

• Effect of an additional table in the FROM clause in the query results?

  I recently helped a colleague debug one of their SQL statements
  
  The output was showing some very unexpected totals, and I was able to shrink down to an additional table in the FROM clause, but not used anywhere else in the application.
  
  Thus, for example
  
  SELECT A.ID, B.CODE
  Of
  EMPLOYEE,
  B OF THE STATUTE,
  PAY THE SAL
  WHERE A.ID = B.ID
  AND
  A.ID = 1;
  
  I was wondering, how can an extra table in a FROM clause influence directly on the rest of the query?
  
  The query above is just an example of what I've seen, the my co worker was working on is a bit larger and a lot more code to read. I noticed that when I added/removed the extra table in my query to co workers and then it worked as expected.
  
  I always thought that an additional table is not attached to what anyone would be just to do the inefficient code, but does not affect output

  just do the inefficient code

  Yes, that too, you will get a Cartesian product by calling is not the entries in the where clause for this table 'disappeared' :(

• where to save the files under options the file name is duplicated how to remove an additional folder with the same name

  Under Options in Firefox, I clicked on save the files under downloads, but the file name twice and an additional file with the same name is created in the folder, i.e.:

  G:\Akbar's Songs\HAMARA DOWNLOADS\HAMARA FORUMS DOWNLOADS FORUMS

  As you can see the file repeats, how can I fix it?

  Also the music files, I download from a site of downloads as a WinRar file and I need to open it. Y at - it an option where the file opens automatically in the folder I chose?

  Thanks a lot for your help.

  Hi Akush, when you install 7 - zip, make itself the default application to open .zip and .rar files. So if you double click on the .rar file, it should open in 7 - zip. If you prefer to decompress immediately, right click the file and look for new 7 - zip items in the menu. I can't think of a way to do this automatically, however.

• When I run mozilla or open a link in a new window but I get the page you want to load an additional page of the new tab opens with it, the difficulty?

  When I launch mozilla or open a link in a new window I get the page you want to load but an additional page of the new tab opens with her. I tried to change my homepage to different things (new tab, firefox home, see the blank page) but I always get a new additional tab to open. How can I get only one page to open it?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information.

  Now, should open a new tab containing your troubleshooting information.

  1. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  3. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• I can't seem to open additional tabs with the +, the drop down menu, or T command? Is this a bug or am I missing something?

  Hello
  I can't seem to open additional tabs with the +, the drop down menu, or T command? Is this a bug or am I missing something?

  I use Firefox 30.0 in OS 10.8.5 on a Mac Book Pro with the Intel Core i7 2.7 GHz and 1333 MHz DDR3 8 GB memory.

  Thanks in advance,
  Pat

  You have a "Community Toolbar" extension installed? Which has been reported by other users of Mac as affecting the new tab feature in Firefox 30.

• To open this workbook, your computer must have a version of Microsoft Excel is installed and your Web browser must support opening files directly from Excel in the

  Im trying to open an excel file from a shared Web site, I used to be able to open them in Excel, when I used Internet Explorer, now all I see is the spreadsheet on a Web page, when I try to open the file in Excel (there is a tab that asked do you want to open in excel) I get a message "to open this workbook, your computer must have a version of Microsoft Excel is installed and your Web browser. must support opening files directly from Excel in the browser. »

  You have Excel installed?
  
  If so, can you use Internet Explorer for the Web site?

  As far as I KNOW, Microsoft is not an add-on for Firefox can be opened from Excel in Firefox. It may or may not work properly depending on whether this Web site uses a MIME type for files it delivers.

  Another way to handle that would be via Open Office or free agency; both are open source (free) that allows to display files XLS (Excel) , and both programs have a Mozilla browser plugin to allow Firefox to open the 'Calc' of these programs.

  http://en.Wikipedia.org/wiki/LibreOffice
  
  http://en.Wikipedia.org/wiki/OpenOffice.org > http://en.wikipedia.org/wiki/Apache_OpenOffice

• Why my game Center freezes when I go by parameters or directly by clicking on the center of games? Can I know which method is the best to use to solve this problem? Also, I use an iPhone 6 s, iOS 9.3.1

  Why my game Center freezes when I go by parameters or directly by clicking on the center of games? Can I know which method is the best to use to solve this problem? Also, I use an iPhone 6 s, iOS 9.3.1

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the call logo comes back again?

  You won't lose data, but it can cure a few glitches.

  If this does not work, the initial Setup would be the next step:

  Use iTunes to restore your device to factory settings - Support Apple iOS

• Black screen C805D - 13G satellite after the switch of the bios to the CSM

  Hi everyone, I really need help on this one.
  I have a Satellite C805D - 13G and it was working fine until I decided to install windows 7 on it. I did a USB key with the OS and the modified bios to UEFI in the CSM to boot from it. Well, since that point the PC never started again. It turns on but it shows nothing (even in the external vga monitor). RAM and HARD drive are very good.
  Y at - there anyone who can help? I have seen many similar cases on the internet, but I can't find any solution (already tried to disconnect the battery and hold the power button for 60 seconds)
  Thanks to all who help me to sort it.
  PS Sorry for my English, I'm from the Italy

  You just need to put the Boot Mode to the CSM to install Win7.
  If your USB boot it cannot be a problem with it. Try to create the USB using "WinUSB Maker"

• Satellite L50 - Win 8.1 - passage of the CSM in UEFI?

  Hi guys.

  Yesterday, I upgraded my Toshiba Satellite L50 with an SSD.
  I installed windows 8.1 and everything seems to be ok... except a little thing...

  When I booted the usb to install windows 8.1 my bios has been installed in the CSM (because I read that if I were to UEFI, usb would be not be started) and now if I try to go to the UEFI pc cannot find the ssd drive and says something like "Reboot and select the right device.
  (I already tried with secure boot eneabled one and off the two but it's the same)

  At the moment I am active CSM with AHCI mode... What can I do to switch in uefi?

  Thanks in advance.

  Good news... Thanks for the feedback: spennacchione

• Remove additional results of the previous step

  Hello world

  I have a step of the 'statement' (step 1) inside a while loop that creates an additional result to the stage (using Step.AdditionalResults.CustomResults.Insert).  For each row in the While loop this 'statement' step will create a new additional result.  After step 1, I want to delete the additional result created in step 1.  If I don't delete it, after each loop my report file will include all previous results additional loop.

  Is there a way to remove the additional result created in step 1?

  Thank you very much!

  Review the attached file in sequence.  Why don't you just use the same result?  Why do you need to insert and remove every time?

  Can you send me this sequence you sent the screenshot?  This way I can get a better feel what you are doing.

• Write to the table, adding additional rows in the csv file

  Hi all

  I created a program that measure current over time.  It works well, but when I write to the spreadsheet, there are additional lines between the row of data.

  I've created a header file, which is passed into the while loop where the data entered in a table and then entered in the worksheet.  If I simply display the table, there is no additional lines, but when I open the file csv in excel, there are more lines.  I'm pretty new to labview, but everything works the way I want to (it's a simple program) apart from that.

  There is a trolley or jump back in your chain of row data.  You can get rid of that by adding a "trim whitespace" function between the function of "visa read" and "replace the subset of the table.

• Be a mistake to create an additional result in the Table UUT_Results:

  Research site of NOR and found information on how to create additional value of loggin in the UUT_Result table.  I copied and saved the database.seq, and the standard process model.  parameter has been added to database.seq.  parameter added to the recall, then added a local variable to the model.  I did all the steps in order, then check the schema was OK and the journaling property has been added.  I always get the following error message and don't know if a step is missed.

  An error occurred calling "LogUUTResult" in "ITSDBLog" of "ZNIUGOL TestStand database logging"
  An error occurred when setting a column value.
  Statement: UUT_RESULT.
  Column: WO_NUMBER
  Property: measure. [Measure 1]
  Name of variable or unknown property 'Logging.WO_Number '.

  Source: TSDBLog

  Error code:-17306; Name of variable or an unknown property.

  Geographical area: step 'Journal USE result' sequence 'SequenceFilePostResultListEntry' in 'SequentialModel2.seq '.

  I think I had two different problems.  I was able to connect additional content under the UUT_Results, but I had to change my settings for database logging.  I disabled additional results, and everything started working.  I have always had a problem with the activation of the additional results box and never gave a reason why.  This occurs with standard features.

  If the last error noted the activation of additional results, so I disabled and was able to get my full database table.

  Thanks for the reply.

• What it means that the DNS server instead sends a node adapter directly status request to the IP address?

  What it means that the DNS server instead sends a node adapter directly status request to the IP address involved in the reverse DNS query. When the DNS server gets the NetBIOS name of the node status response, it adds the DNS domain name specified in the WINS - R record the NetBIOS name provided in the node status response and passes the result to the client applicant. ?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.