Directories of destination for copy files seeded in to test the page seeded in Jdeveloper

Similar Questions

• whenever I try to, the open, Tunes, I have, get, message:, the file, "Ditties", is, on, to, locke d, drive, or you do not, write, permissions, for, this, file., Suggestions, to get on the past, this?

  whenever I, try to open it, Tunes, I have, get, the, message:, the folder, "Ditties", is, on, to, locke d, drive, or you do not, write, permissions, for, this, file., Suggestions, to get over the past, this??

  How about you post that again without commas and maybe then I'll read it?

• I can't find the serial numbers for my CS3 and Photoshop CS5 on the page my Adobe products. I registered these past two years

  I can't find the serial numbers for my CS3 and Photoshop CS5 on the page my Adobe products. I registered these past two years. Kenneth Robison

  Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html

• How to change the second destination for imported files?

  sstarting with 4 LR, I used a second destination to backup my files during import.  All in the middle of life 5 LR, the second destination suffered a catastrophic failure, and I replaced the drive with a large SSD.  To distinguish it from other readers, I always add SSD like the tail of a drive name to distinguish regular readers or raid arrays.  In all cases, the change of name of the new command meant that I had to change the name of destination for the second copy of the imported files.  I looked high and low by books and textbooks online and could never find the location for a modifiable version of the location of the second drive.  I faced the same problem in 6, which seems to work like 5 in this field.  It should be drop-dead simple and obvious, but I sure can't find.  I can get the full panel which should allow me to change the locations, but nothing in the Panel seems editable, clickable, except the main destination.

  can someone explain the secret formula of decoder for it.  Right now I'm reduced to a script Automator that backup the Lightroom photo by car to the second destination using carbon copy more closely, but it seems Aussie an inefficient use of resources.

  Thanks for your help.

  cause, it was a mistake to 02:00 my time and I didn't know that I had done.

• Error copying file or folder: cannot read the source file or disk.

  My problem occurs when you try to copy on the same computer I am on (or to a remote drive).  I get one of these messages in the dialog "error copying file or folder.

  box:

  Impossible to copy 'Filename': data error (cyclic redundancy check).
  Impossible to copy 'Filename': cannot read the source file or disk.

  Hey Norton victim,
  
  (a) what is your operating system?
  (b) what program file you are not able to copy?
  
  As the files are copied, Windows verifies that the data that has been copied are the same as the source files. The cyclic redundancy check (CRC) error occurs when the copied data does not match the original.
   
  This could be down to a mistake of the DVD, the disc goes wrong and has failed to 'read' the file properly or the file was placed on a bad sector on your hard drive. (Could be just down to a scratch or some marks on the dvd, maybe clean it if necessary and try again).
   
  I would run a check disk (CHKDSK) against the drive to rule that, although lacking - you have another dvd player to try the disc again? If so, try the dvd in another drive, or even a completely different machine to try to pin-point the problem.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
  
  FOR INFO:
   
  Data error (cyclic redundancy check)"Error Message When Outlook downloads E-mail
  http://support.Microsoft.com/kb/319128
   
  Aziz Nadeem - Microsoft Support

• Reviews for .dll file loading error when starting the laptop

  After removing an infection from malware Thinkpoint of my laptop and reconstituted at almost normal speed, a notice of a .dll file loading error appears while booting.  What are the options to eliminate that?

  This isn't a lot of information to go, but it's because forums MS Answers does not prompt for information, when a new question is asked.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Read this and see if it looks like your question and if it is not, let us know exactly what you see and we will always fix it:

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Why creates shortcuts for Moving files when drag and drop the folder or file in another folder?

  I am using Windows XP SP3, just before I drag and drop the file into another folder in my windows explore. Suddenly, he is creating shortcuts for moving file. I'm not able to move the file by drag / move the mouse, it is possible that by cutting and Paste(Ctrl+X) using the keyboard. Why?

  Maybe your 'Alt' key is stuck.
  See exchanging the keyboard with another makes all the difference.

  HTH,
  JW

• Open the bridge for Photoshop files are not listed in the MRU PS

  I've just upgraded to the latest version of Photoshop and Bridge. When I open a file of the bridge in Photoshop and then make changes to the PS and save, the file is not listed in the file/open recent... list or in the new interface that lists recent files. All files opened directly from PS work correctly but the bridge open files are not listed.

  Please reset the Photoshop preferences once and then see if it helps.

  How to reset preferences: preference file works, names, places | Photoshop CC 2014

• the page was updated phone and when I FTP'd "modified files" it has never changed the page

  I wasn't ready to charge the phone part of Muse but already added a logo and contact info.  When I saw that it was on my phone, I'm back in Muse and added a block of text indicating that we are updating the mobile site.  When I FTP'd the "modified files" page never changed.  Any idea?  I checked my diapers and everything.  After that I added the block I returned in Muse and changed the wording.  After ftping the updated files the new he writes on it and there are now two layers of text on the other!  Ugh!  So I thought I would remove both.  Evil.  They are always there.  Any clue?

  Select "All Files" when you do the FTP download.

  Muse is based only on the information contained in the muse_manifest.xml file to determine which files have been changed since Muse last downloaded files. If you add, change, or remove files from your Muse site will be completely unaware of these changes and you will need to download with select "All Files" in order to get the Muse back in sync with what files (and file versions) are on your site.

  Muse takes this approach because check manually that all the files on FTP changes for each FTP download would be very slow.

• The display of file as a link on the page of the ADF

  Hello
  
  I developed a page where I have a field where I'm downloading of the file.
  
  The download works fine and it uploads the file to the BLOB column in an Oracle table.
  
  Now I have to post the file as a link on the same place (if the file has been downloaded previously for this record.
  
  Can someone please guide me how I can get this feature.
  
  Thank you
  Anoop

  Sorry, I don't understand your question.
  It should be clear to you after reading blog (and the sample download) that id "ImageData" the name of the column where I store the image as a BLOB data. It is also clear the comment in the code.

  Timo

• Whenever I try to open other pages, they'll just be "loading" for 30 seconds then it says that the page cannot load (as if my internet is disconnected)

  Recent internet connection problems

  Recently, my internet has been acting weird. He has never acted like this before, until 2 people moved my basement and began to share Internet (maybe a coincidence, but not sure). Sometimes when I leave my computer on and stay away from the keyboard and go back some time after and open my internet browser, only my home page would be in charge. Whenever I try to open other pages, they will simply be "loading" for 30 seconds then says that the page cannot load (as if my internet is disconnected). But the problem is, when I click on network and sharing Center, there is nothing wrong with that.

  Access - LAN and the Internet

  Connection - connection to the Local network

  It's the same when my Internet works fine, but I can't just browse other Web pages EXCEPT the home page that appears when I first open my browser. When this happens, I usually unplug my modem then reconnect OR just keep trying to load a page when after like 5 minutes or more, everything works normally.

  How can I solve this problem? It is annoying and happens almost everytime I go back to use my computer after staying idle for some time.

  By the way, I noticed that I have 4 'networks '. I'm not sure what they are, but I could merge or delete them. It would help my situation?

  Control Panel-> network and interest-> network and sharing Center Center-> customize-> Merge or Delete network locations.

  I am very annoyed by the present and I would be grateful any entry in this case.

  Thank you in advance.

  Hello

  Follow the steps in this links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• Enterprise deployment - Firefox is more copy files prefs.js programs in the user on first start profile

  Deploy us through SCCM Firefox and have a custom Prefs.js file is used. Before Firefox version 24, Firefox used to copy the file prefs.js program Mozilla Firefox Firefox\defaults\profile to profile user at first startup of Firefox after installation. Version 24 is no longer that.

  This behavior occurs with Windows XP and Windows 7.

  Any advice would be greatly appreciated! Thank you.

  Hello acotugno, since firefox 21 that the pre-series should go in browser\defaults\profile to be applied.

  http://Mike.kaply.com/2013/05/13/more-major-changes-coming-in-Firefox-21/

• How can I copy files from one disk to the other?

  I want to copy all my mp3 files from my ITunes music folder on an external hard drive.  I'm not interested in records, only the mp3 of themselves.  I got here in 'terminal' that I can execute a command?  Please notify.  Thank you.

  Just use the search function in the Finder.

  Select the folder enclosing and type MP3 in the search.

  If you have not changed the search preferences, you will need to click on the name of the folder next to "this Mac.

  It should list all the MP3 files.  Select all and drag to the external hard drive.

• How can I copy files in a subfolder of the folder files (x 86) program? I am an administrator.

  I use a Pavilion dm4 laptop running Windows 7 Professional.  I need to store a configuration file in a folder that is located in the tree files (x 86).   I'm using an account with administrator privileges, but am unable to change the properties of the progam (x 86) files and subfolders of read-only.  When I try to do it seems to work, but on the control again, read properties only screen returns.  I am also unable to change the settings for the administrator of this file - buttons, checkboxes, etc are all grayed out.

  Hello

  Download the utility which will add "Take Ownership" to the contextual right click menu.  The download is on the following link.

  Appropriating

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip (if you have a 64-bit version of Windows, you need this version of 7-Zip ) which can be used to open it so that you can run the Setup program.  Then just right click the folder zipped, select 7 - Zip and extract the files.  When you're done, open the newly extracted folder and you can find the utility to add "Take Ownership" to the right click menu.  Double-click it to install it and then close the window.

  Navigate to the folder of the program that you need to store the configuration file, right click and select 'Take Ownership'.  You should now be to paste the configuration file in this folder.

  Kind regards

  DP - K

• Order of execution for explicit file dialog boxes and query the user input dialogue

  Hello

  In my VI I use 1 and 2 express file dialog boxes prompt the user for input dialogue box. Y at - it any easy way to determine an order of exuction for these express dialog boxes? Or I have to use screws to notify?

  In fact, I just need the input of fo dialogue to prompt the user to be the first.

  Thanks for the tips!

  Martin

  Like most of the functions, the flow of execution can be set by plugging the error / mistake on clusters.