Enterprise deployment - Firefox is more copy files prefs.js programs in the user on first start profile

Similar Questions

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• How to create the file on a location where the user with rights?

  Hello
  I have a requirement in my application a lot of program thatcreating a report to a file and it is written in a user's location. Now he specified directly as (c:\ or d:\...).
  
  The problem is that the user does not have right to access that directory. What I suggest, or I want to create is special reports on a location where the user with rights.
  
  Essentially in Windows system % UserProfile % having right to do anyting. Assume that the operating system that is installed in C: the % UserProfile % c:\documents and Settings\nom_utilisateur or D: then D:\Document and user Settings\nom.
  
  How do I get this help please me.
  
  Good help will be appreciated.
  
  Iqbal

  Hello
  The best practice would be to create the file in My Documents for the user currently logged in windows.

  Unfortunately, you did not mention your version of forms. In an older version like 6.x it is function in the library of d2kwutil called Read_Registry in the win_api_environment section, and in the more recent versions the same availble function in the library webutil to client_ name.

  So, you can read the registry database for the current logged in user using the function mentioned above of the location next to the register.
  My Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell folders

  There is an entry named personal. Read the path of this entry when running while generating / record file to the customer's location and save the file in this path.

  -Clément

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

• What file or a setting in the game engine automatically starts when you choose a plane, the engines are already started on the track.

  Microsoft Flight Simulator X

  What file or a setting in the game engine automatically starts when you choose a plane, the engines are already started on the track.

  Thank you

  Nick Satullo

  E-mail address is removed from the privacy *.

  Original title: Flight Simulator X

  Hi Nick,

  Please post your request in the Microsoft Flight Simulator forums and it would be better suited to the community of players for Windows. Please visit the link below to find a community that will provide the support you want for better assistance.

  http://support.Microsoft.com/GP/games-for-Windows

• I am deploying Firefox ESR and need to know if plugins read the registry can be activated by the force on all computers.

  I'm deploying Firefox ESR 31.X to all the computers in my company. We have plugins for security that I need to have forcibly running on each computer so that users cannot turn it off. The main example is McAfee SiteAdvisor. Firefox detects the plugin based on the HKLM\Software\MozillaPlugins registry key. The plugin provides a path to the location of the DLL in the McAfee program folder. Is it possible that I can put this plugin to always be activated?

  You can use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify new values (default).

  Put a local file - settings.js in the folder defaults\pref also the file prefs.js - channel where to specify using mozilla.cfg.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0);
  

  These functions can be used in the mozilla.cfg file:

  defaultPref();	// set new default value
  pref();		// set pref, allow changes in current session
  lockPref();	// lock pref, disallow changes
  

  See:

  • http://KB.mozillazine.org/Locking_preferences
  • http://Mike.kaply.com/2012/03/16/customizing-Firefox-AutoConfig-files/
  • http://Mike.kaply.com/2014/01/08/can-Firefox-do-this/

  You must set the pref (s) of plugin.state related to 2 always activate a plugin.

  • lockPref ("plugin.state.npmcffplg", 2);
  • plugin. State (0: never activate; 1: ask to activate; 2: always activate)

• Error copying file or folder: cannot read the source file or disk.

  My problem occurs when you try to copy on the same computer I am on (or to a remote drive).  I get one of these messages in the dialog "error copying file or folder.

  box:

  Impossible to copy 'Filename': data error (cyclic redundancy check).
  Impossible to copy 'Filename': cannot read the source file or disk.

  Hey Norton victim,
  
  (a) what is your operating system?
  (b) what program file you are not able to copy?
  
  As the files are copied, Windows verifies that the data that has been copied are the same as the source files. The cyclic redundancy check (CRC) error occurs when the copied data does not match the original.
   
  This could be down to a mistake of the DVD, the disc goes wrong and has failed to 'read' the file properly or the file was placed on a bad sector on your hard drive. (Could be just down to a scratch or some marks on the dvd, maybe clean it if necessary and try again).
   
  I would run a check disk (CHKDSK) against the drive to rule that, although lacking - you have another dvd player to try the disc again? If so, try the dvd in another drive, or even a completely different machine to try to pin-point the problem.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
  
  FOR INFO:
   
  Data error (cyclic redundancy check)"Error Message When Outlook downloads E-mail
  http://support.Microsoft.com/kb/319128
   
  Aziz Nadeem - Microsoft Support

• Captivate 6 errors: Missing file libwinpthread - 1.dll and the Application could not start correctly (0xc000007b) under Windows 2008 R2

  Hello

  I have a problem with Captivate 6 installation on Windows Server 2008 R2. I have 2 different scenarios where I tested it, but the result is the same.

  1. I used AMEE (Application Manager Enterprise 3.1) to create the installation of the deployment via SCCM 2012 Package.

  Note that the current package works fine on Windows 7 (x 86 and x 64), but not on 2008 R2 error after I tried to launch the Captivate.exe application.

  The error indicates that there is a missing file: libwinpthread - 1.dll and if I copy and made a recording of the present. DLL file then he sends another error saying: on-demand failed to start correctly (0xc000007b) so he won't ever let me launch the application.

  2 now, if I install the package directly from the Original sources (CD) without creating any package AMEE after completing the installation, I have always the same error about the missing DLL file.

  Is there a fix or workaround to install 6 Captivate on Win2008 R2?

  Thanks in advance and greetings.

  This seems to be a generic question unrelated to Captivate. Here is a site that lists the possible causes.

  How to fix Libwinpthread - 1.dll is missing / not found error

  I don't know if their solution works well.

  Anthony

• Programs on the user account and the lost files

  Hi all, yesterday I came home after having some holidays and started my pc and when I chose my user, all my files and programs have disappeared, even my wallpaper was by default... So I went to: C:\Documents and Settings\(my user) \desktop and everything was there, so I moved all my important things for the user 'new '... Today, when I chose my user, I go to my former user, with all my stuff and my old wallpaper, but the things that I moved just disappeared... I need help, these things that I've lost are really important...

  Not good.

  You initially suffered a corrupted profile.  When this happens, Windows compensates by logging in with a temporary profile that is deleted when you disconnect you.  What you should do at this point is presented in one of the following articles:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >
  or, Alternatively,.
  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  What you did instead was to move all your data in your temporary profile that is deleted when you disconnect.  You must be disconnected, that's what happened.  Files passed.  So, your best alternative is to this point to restore your files from your backups.  ('Very important' things are always saved).

  If you have no backups, then you learn now why they are needed.  You should immediately stop using your computer/drive, remove the drive and take it to a professional that can recover deleted files.  You can also (on another computer), you can search the Web for programs that can be used to recover deleted files accidentally.  Sorry, but I can offer no recommendation on such programs.

  Sorry and HTH.
  JW

• Order of execution for explicit file dialog boxes and query the user input dialogue

  Hello

  In my VI I use 1 and 2 express file dialog boxes prompt the user for input dialogue box. Y at - it any easy way to determine an order of exuction for these express dialog boxes? Or I have to use screws to notify?

  In fact, I just need the input of fo dialogue to prompt the user to be the first.

  Thanks for the tips!

  Martin

  Like most of the functions, the flow of execution can be set by plugging the error / mistake on clusters.

• Directories of destination for copy files seeded in to test the page seeded in Jdeveloper

  Hello

  I need confirmation on how to place the JDeveloper environment to test a seeded page - specifically the directories of files copied from $JAVA_TOP and < PRODUCT_TOP > mds destination.

  I want to start (and possibly expand) a page which is owned by the module for example AP, I took copies of

  Set 1) all xml files in $AP_TOP/mds (including subdirectories, in ascii mode)

  Set of 2) all xml files of $JAVA_TOP (including subdirectories, i.e. all of the modules, in ascii mode)

  Set of 3) any type of files from $JAVA_TOP (including subdirectories, i.e. all of the modules, in binary mode).

  My local JDEV_USER_HOME is c:\dev\oaf\r1211\jdevhome\jdev. I understand that these files must be unzipped in one or more of the following directories JDEV_USER_HOME/myclasses and JDEV_USER_HOME/myprojects.

  Could he confirm what set of files goes into what directory (ies).

  Together 1 must be copied into myclasses only, or my projects only or both. Same question for Set 2 and 3 of the value.

  I tried different combinations, but not able to get the desired effect. for example sometimes the module of the application (for example, HomeAM) appears in the Jdev browser in oracle.apps.ap.payments.server duplicate. This has been fixed when I deleted all the files in my project class (so keep the class under myclasses only files), now the controller (oracle.apps.ap.payments.webui.HomeCOJava) disappeared from the node browser webui.

  We are on EBS R12.1.3. JDeveloper 10.1.3.3.0

  Thank you

  Sanjay

  Hello Sanjay

  Try the link, below it will give you an idea:

  http://apps2fusion.com/apps/14-FWK/456-iExpenses-OA-framework-R12-extensions

  Thank you

  David

• How can I copy files from one disk to the other?

  I want to copy all my mp3 files from my ITunes music folder on an external hard drive.  I'm not interested in records, only the mp3 of themselves.  I got here in 'terminal' that I can execute a command?  Please notify.  Thank you.

  Just use the search function in the Finder.

  Select the folder enclosing and type MP3 in the search.

  If you have not changed the search preferences, you will need to click on the name of the folder next to "this Mac.

  It should list all the MP3 files.  Select all and drag to the external hard drive.

• Copying files very slow USB after the ICS update

  Does anyone else have a problem?

  I'm trying to copy a 500 MB external hard drive (FAT32) file on the internal SD card and just of crawls and crashes. It used to be swift.

  Does anyone else know this? Any other file manager would be faster?

  Which file manager you use? Have you tried HD file manager? I've been using it to copy a file over 700 MB of a flash drive to SD internal card without any problems "slow".

• Windows Explorer crashes when you try to copy files (from dvd - rom on the hard drive)

  This is the error I get, copied from the technical details of UAC.

  I tried to create the new account and sfc/scannow
  sfc/scannow pointed out problems and errors, but is unable to repair.
  The Explorer.EXE version 6.1.7600.16450 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.

  Process ID: 98c

  Start time: 01ced605f3f95e5c

  Time of termination: 60000

  Application path: C:\Windows\Explorer.EXE

  Report ID:
  Is that the next step of repair window?
  Thanks in advance

  One of the recurring errors in Event Viewer was the 'Source' following 'KScsiPrt ':

  The description for event ID 9 source KScsiPrt is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  
  

  If the event is on another computer, the display information had to be saved with the event.

  
  

  The following information has been included in the event:

  
  

  \Device\Scsi\KScsiPrt1

  Which may indicate a problem with the SCSI KernSafe controller.

  Can you try disabling the controller SCSI KernSafe in Manager devices as suggested hereand see if that makes a difference.

  You may need to restart the computer after you disable the driver.