DISA compliance in 5.7

Similar Questions

• I've updated to v10.0 version, now a specfic program that runs using a bowser does not work. The problem is when the program runs a compliance test the following error message is displayed in the test results: Test; Version of the browser, the Test result

  COMPLIANCE TEST
  Results of Test test
  Firefox browser
  Version 1 browser higher than 2.0 must
  Acrobat Reader Version 9.5.0.270
  Sun Java Plug-ins active true
  Java JAVA version
  JavaScript 1.8
  Flash Flash Player 11
  ERROR Please correct

  This program is probably only read 1 of the number 10 - IOW, it is not able to read a number with 2 digits before the decimal point.

  Contact the developer of this program and let them know that they have some Fixin ' to do.

  See the MP I send to you. See your Inbox at the top of the forum pages.

• NI 9265 compliance voltage

  Someone can give me a decent reason why voltage compliance on the NI 9265 is only 12V, but you can provide the map with 9-36VDC?  The process control industry REALLY want to know if there is any chance to update this one day.

  Maybe that's a problem for the exchange of ideas.  I could see where try it power several devices from a single loop could require higher compliance voltage.

  The distributed system that you refer to seems like an interesting challenge.

• IviSwtch specific Test IVI Driver compliance in CVI crashing

  I have problem with the IviSwtch-specific driver. I have finished all of the code for this driver and test in CVI specific tool called 'Test IVI Driver. " Structure and functioning of the special series of tests without any errors. Problem is with the compliance test that returns:

  the driver could not be initialized by the class driver.

  Compliance test was interrupted.
  Error returned: bffa0011
  Error message: function or method not supported.

  I tried to add dll exports based on this solution http://digital.ni.com/public.nsf/allkb/1DCA138862E75119862576C5006EA144

  After doing this compliance test comes crashing down and I have to close.

  Someone met with such a problem? I would be grateful for any help.

  Concerning

  Tomasz

  > The format of DLL version is valid.

  ERROR: DLL version is incompatible with the version of the header file.

  All attributes have the exact names.

  All attributes have correct data types.

  This error means that the revision of the generated .dll does not match the version major and minor, defined in the header. This should not be a conern if you won't release the pilot to customers and that you take care of revision.

  > ERROR: the driver is not c > ompliant with the Inherent group because:

  -The following intrinsic attributes are not implemented:

  INSTRUMENT_MANUFACTURER
  INSTRUMENT_MODEL

  It is difficult to say the reason for the root of this problem, but there might be something does not work in your code. What is the definition of these powers? OR send your project to [email protected]. I think that NEITHER could help to take a look inside.

  Thank you

  Charles

• System Center 2012 - data from compliance software

  I have my installation of SCCM 2012 connected to a WSUS server.

  All updates are synchronized via SCCM perfectly, however none of the compliance data has been entered.

  Conformity assessment is enabled in the default settings of the client.

  I tried to force the recovery of these data by downloading the required peripheral collections computer strategy, still no luck.

  Can anyone shed some light on this for me?

  Thank you

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you in the TechNet Forums:

  https://social.technet.Microsoft.com/forums/SystemCenter/en-us/home?category=ConfigurationManager

  "Forums SCCM".

  https://social.technet.Microsoft.com/forums/en-us/home?category=systemcenter2012configurationmanager

  See you soon.

• Service Pack compliance - SQL - SCOM

  We have:

  SCOM R2 2012

  SQL MP is up to date

  The question:

  We rely on the compliance of Service Pack within the SQL MP in order to know when the SQL servers fall in non-compliance.  He worked up to 1.5 months ago.  It worked so well, that it has become a tool for our team of SQL.

  We have realized that it stopped working when the SQL team members out of non-compliant servers where we have not received any notification.

  There is little documentation about this tool.

  (1) how do SCOM servers communicate with MS on knowledge when check compliance?  My hunch is that something has changed in the Internet network access.

  (2) is just use MS Updates?

  Any help will be greatly appreciated.

  Thank you!!!

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  Or here:

  https://social.technet.Microsoft.com/forums/SystemCenter/en-us/home?category=systemcenteroperationsmanager

  See you soon.

• 2012 Foundation Server license compliance

  The server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliant check cannot be performed, the server will automatically stop in 0 days

  I started to get this two small server running Server 2012 Foundation R2, they work well for almost a year into two separate companies. All of the sudden they both started to get this error. The server are Fujitsu, both running the OEM of ROK Fujitsu version are authorized and registered with microsoft. They work together in a 'working group' envioment and both have 9/10 users (Foundation supports 15 users) that I've seen so much after that, but neither gives an answer before stright as to what is the problem and how to fix it? a moment to give a shared other printer installed DNS, I checked both and both work very well. The two server is the only server on the network and is configured as a tourist server but are not used as such users share only 1 or 2 folders and print nothing else is used. Any pointer appsiated.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller.

  Hi all

  Can I confirm with expert from Microsoft, it's windows foundation server 2012 may not be the first domain controller (which means that the first AD in the forest)? It must be attached to the root of the forest as a domain controller. If I'm promoting it to be first DC in new forest, he invites you to "the server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliant check cannot be completed, the server will automatically close in 9 days...

  Thank you & best regards
  Andy

  Hi Andy,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope the helps of information.

• PCI Compliance Server 2012 IIS 6.2

  I have a client that is running Server 2012 with IIS 6.2 and so far I've supported all the questions except two to make them compatible PCI.

  Here are the two imminent failures.

  Server is sensitive to the BEAST attack 443/tcp
  STATE OF PCI COMPLIANCE
  PCI severity: MEDIUM
  IN CASE OF FAILURE
  DETAILS OF THE VULNERABILITY
  CVSSv2 Base Score: 4.3 (AV:N / AC:M / to the: N / reports / i: s/o: N)
  Gravity: potential
  Category: Browser Exploit against SSL TLS
  CVE ID: CVE 2011-3389
  Bugtraq ID: 49388 49778
  OSVDB: 74829
  References Microsoft: MS12-006
  References of providers: CERT: TA12-010 has CERT - VN:VU #864643 HP: HPSBMU02900
  UBUNTU:USN - 1263-1 SECTRACK:1026103 SECTRACK:1025997
  SECTRACK:1029190 APPLICATION: 49778 SUBMISSION: 49388 REDHAT:RHSA - 2012:0006
  REDHAT:RHSA - 2011:1384 MS: MS12 - 006-201406-32 GENTOO:GLSA

  ------------------------------------------------------

  osCommerce allows cross-site scripting 443/tcp
  STATE OF PCI COMPLIANCE
  PCI severity: MEDIUM
  FAILURE of the XSS/SQL/SSL vulnerabilities are not compatible PCI
  DETAILS OF THE VULNERABILITY
  CVSSv2 Base Score: 4.3 (AV:N / AC:M / to the: N / c: n / I: P / A:N)
  Severity: concern
  Category: Cross site scripting
  CVE ID: CVE-2003-1219
  Bugtraq ID: 9238
  OSVDB: -.
  Microsoft references: -.
  References of providers: QUOTE: 9238
  Details: Cross-site scripting (XSS) vulnerability in the function tep_href_link in
  for osCommerce before 2.2 - MS3 html_output.php allows remote

  Hello

  Question about Windows Server 2012 are best addressed in the TechNet forums. Ask your questions here: https://social.technet.microsoft.com/Forums/windowsserver/en-US/home

• How can I make sense of compliance SCCM reports?

  Hello

  I've created several update lists in SCCM. I have planned deployments and waited patiently as they occur. Now, when I jump into SCCM reporting to see how consistent my workstations are against these lists, I'm surprised by the<20%>

  Drilling down to individual computers in this list, I can see that SCCM reports compliance based on all THE updates that are available for these workstations, not the list updated I asked a compliance report for. Things like KB2545698, which is the size of the police and of irregularities in Internet Explorer 9 vs IE8?  I have not even approved or deployed that day and did not want to follow the compliance against it?

  In short, how to get the report of "Overall compliance" in SCCM for the display of results for the update of the list selected when generating the report and no compliance report on every possible update these workstations could potentially install if I approved and deployed (as this information is ZERO make them for me).

  Thank you

  Max

  How does this relate to the features of Windows Update?

  Tip: This is a forum for specific consumers. Try to post in the forums for it professionals in place => http://social.technet.microsoft.com/Forums/en/category/w7itpro, windowsvistaitpro, windowsxpitpro /

  On the other hand, you can find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

  Specific Windows Server security sub-forum: http://social.technet.microsoft.com/Forums/en-US/winserversecurity/threads

• HIPAA compliance software

  I'm looking for a program to use that will be in HIPAA compliance when sending protected electronic health information. Any suggestions?

  Thank you!

  Kristin

  Why do you want to ask in a forum of Microsoft Windows?

  Let me Google that for you

  You might also be interested in
  http://www.oregonhipaaforum.org/
  http://www.emrandhipaa.com/

• P2014H vs P2014Ht of regulatory compliance

  What is the difference of P2014H and P2014Ht monitors?  Notice that the P2014Ht is labeled regulatory compliance.  There is a physical difference between the two?  Some monitors are actually marked with the numbers of different model like P2014H or P2014Ht?  Thank you.

  There is no difference. Go here and you can see that there is only one monitor to P2014H. The name of Dell's business model is P2014H. The regulation is called P2014Ht.

• Cisco's preferred compliance policies

  Hello - I do a compliance in PI for QoS verification strategy. I would like to create a policy that would look to make sure that the QoS is correctly applied to all interfaces of contactors. Is it possible that PI for this in the configuration of compliance policies?

  Andrew,

  The attached XML file contains the definition of a compliance strategy that will review the commands you want on ports configured as access, trunk or Port-Channel.

  Extract and import under Configuration > compliance > policies.

  Then, create the profile under Config > compliance > profiles and add policy. From there you can run it on the desired devices.

  Please rate the thread if it helps.

  Luis

• Compliance model

  I'm trying to template installation and compliance check and a change in the configuration based on the following criteria

  All switches, any interface fastethernet with a description of the interface that contains the string "bmg" should have no link-status of snmp trap command.

  ANBODY help please?

  This should work for you.

  Template: CheckDescr
  Sub-mode: interface [#FastEthernet.*#]
  Is Prereq: Yes
  Body:
  + [#description .*bmg.*#]
  

  
  Template: NoLinkStatus
  Parent: CheckDescr
  Prereq: CheckDescr
  Body:
  + no snmp trap link-status
  

• During the ultimate Win 7 update: an error prevented a compliance audit required to complete.

  Attempt to upgrade to Windows Vista Home Premium 32 - bit for Windows 7 Ultimate 32 bit and every time after the compatibility check, the upgrade fails with the following message is displayed:

  The following problems prevent upgrade Windows. Cancel the upgrade, perform each task and then restart the upgrade to continue.

  • An error has prevented a compliance audit required to complete. Cancel the installation and try the upgrade again.
  As you can see, there is no 'missions' to fill here, just the same error every time without any explanation, and restart the upgrade just did appear the same result. I have disabled all programs on the unique security system, and the result was always the same. Went a step further and uninstalled all and still no change. Disabled all non-Microsoft services and programs start and tried again, but without success. Installed all the updates of traffic Vista, but that did not help either. I considered the possibility that it is an error with the DVD itself, but physically it's impeccable, so I don't think it's that. I is actually in what is originally in turn repeatedly this error. Even just to know where begin the search would be a great help - the compatibility report tells me nothing.

  Hi Saizen,

  Thanks for posting. Use any type of bootloader such as Bootcamp or GRUB? If so check your partition, and make sure that your Windows 7 is the main boot partition. Also, try the following.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  Step 1: Perform a clean boot.

  1. Click Start

  type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  1. On the general tab, click Selective startup.
  2. Under Selective startup, clear the Load Startup items check box.
  3. Click the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  4. Click OK.
  5. When you are prompted, click restart.
  6. After the computer starts, start the program or game and see if the problem is resolved.

  If this resolves the problem perform step 2, otherwise type msconfig to start and select normal startup on the general tab and restart.

  Step 2: Enable half the Services points

  In this step, you try to isolate what background service is causing interference with the game or program. Start by half of the services turn on and off the half.

  1. Click the Services tab, and then click to select the hide all Microsoft Services check box.
  2. Click to select half of the check boxes in the Services list, leaving the other half not controlled.
  3. Click OK.
  4. When you are prompted, click restart.

  Step 3: Determine whether the problem is resolved

  If the game or program works after you restart your computer, then you know the interferent service isn't among the services that were turned on. So, it must be among the services that have been disabled.

  If the program or the game does not work after restarting the computer, then you know that interfere service may be among the services that were turned on.

  Now that you have eliminated some services as the cause of the problem, you can use a process of elimination to determine which service might be the cause of the problem. You can keep selectively turning services or turn off until you isoliez a service that might be causing the interference. To do this, follow these steps.

  1. Start the game or program and check whether the problem is resolved.
  2. If the problem returns, follow these steps:

  a. start the System Configuration utility. Go to "step 1: start the System Configuration utility" for instructions on how to do it.

  b. click on the Services tab and then click to select the hide all Microsoft Services check box.

  c. Click to clear half of the check boxes that you have initially activated in the Services list.

  d. click OKand when prompted, click restart.

  e. start the game or program and check whether the problem is resolved. If the problem returns, one of the services that is enabled may cause interference. Continue to repeat steps a through d, disabling services to try to isolate a service that is causing interference. If you are unable to isolate a service as the cause of the problem, these services are likely not to cause interference.

  If the problem is not returned, then one of the services allowed to step 2 is a service interfere. To isolate this service, follow these steps:

  f. start the System Configuration utility. Go to "step 1: start the System Configuration utility" for instructions on how to do it.

  g. click on the Services tab and then click to select the hide all Microsoft Services check box.

  h. Click to select half of the check boxes that you originally disabled in the Services list.

  i. click OKand when prompted, click restart.

  j. start the game or program and check whether the problem is resolved. If the problem returns, one of the services that you selected in step c is an interferent service. Continue to repeat steps a through d, disabling services until you to isolate the service that is causing interference.

  If you find that the services in the Services list cause this problem, go to "step 4: enable half of the startup items" in an attempt to determine whether a startup item is causing the interference. If you were able to isolate a service as causing interference with your game or program, go to "step 6: resolve the problem."

  Step 4: Enable half of the startup items

  In this step, you try to isolate the startup item might be the cause of interference with the game or program. So start by half of the elements start turning on and off half the points.

  1. Start the System Configuration utility. Go see ' step 1: start the System Configuration utility "for instructions on how to do it.
  2. Click on the Startup tab, and then click to select half of the check boxes in the Startup list.
  3. Click OK.
  4. When you are prompted, click restart.

  Step 5: Determine whether the problem is resolved

  If the game or program works after you restart your computer, then you know the interferent service isn't among the startup which were on items. So it must be one of the startup items that were disabled.

  Otherwise, if the program or the game does not work after restarting the computer, then you know that interfere service is among the startup which were on items.

  Now that you have eliminated some startup like items being the cause of the problem, you can use a process of elimination to determine which startup item might be the cause of the problem. You can keep selectively turning startup items or off until you isoliez a service that could be the cause of interference.

  1. Start the game or program and check whether the problem is resolved.
  2. If the problem returns, follow these steps.

  a. start the System Configuration utility. Go to "step 1: start the System Configuration utility" for instructions on how to do it.

  b. click on the Startup tab.

  c. Click to clear half of the check boxes that you have originally selected in the Startup list.

  d. click OKand when prompted, click restart.

  e. start the game or program and check whether the problem is resolved. If the problem returns, one of the startup items that is enabled may cause interference. Continue repeating steps a through d, turning off startup returned to try to isolate a service that is causing interference. If you cannot isolate any an element start as being the cause of the problem, these services are likely not to cause interference.

  If the problem is not returned, then among the disabled at step 2 startup items is a service interfere. To isolate this service, follow these steps.

  f. start the System Configuration utility. Go to "step 1: start the System Configuration utility" for instructions on how to do it.

  g. click on the Startup tab.

  h. Select only half of the remaining check boxes that are cleared in the Startup list.

  i. click OKand when prompted, click restart.

  j. Repeat this step until you have selected all the check boxes.

  k. start the game or program and check whether the problem is resolved. If the problem returns, one startup items you selected in step c is an interferent service. Continue to repeat steps a through d, power off of starting points until you to isolate the service that is causing interference.

  If you were able to isolate a service as causing interference with your game or program, go to "step 6: resolve the problem." If you find that the services in the Startup list cause this problem, go to the "Next steps" section for other resources that may help you resolve this problem.

  Step 6: Resolve the problem

  If you have determined what specific context program or service is causing the problem, contact the manufacturer of the program to determine if the problem can be solved.

  Or, you can disable the interferent in the System Configuration utility. To disable the service, follow these steps.

  1. Start the System Configuration utility. Go to "step 1: start the System Configuration utility" for instructions on how to do it.
  2. Disable this service. Follow these steps.

  a. click on the Startup tab and Services , according to the location of the service.

  b. Click to uncheck the box next to the service you want to disable.

  Click OKand when prompted, click restart.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think