Disable access via RDP client?

Similar Questions

• Allowing external IP access via VPN Client

  We are looking for our remote VPN users to access an external IP address.  Basically once users authenticate when they try to access 202.1.56.19, they should be out nat through the external interface of the firewall.  Below is out of the package violated on "vpn ecrypt" tracer and as an extract from the config.  On the client, I see that the road to 202.1.56.19 was added, but it does not work.

  Please advise more information be required ing.  Thank you.

  access list INSIDE-OUT scope ip 10.15.160.0 allow 255.255.255.0 any
  access OUTSIDE list / allowed extended Interior ip 10.15.160.0 255.255.255.0 any
  Access-group OUTSIDE / inside interface OUTSIDE-IDC

  NONATIDC list of allowed ip extended access all 10.15.160.0 255.255.255.0

  NAT (INSIDE) 0-list of access NONATIDC
  NAT (INSIDE) 1 10.15.160.0 255.255.255.0
  Global (OUTSIDE-IDC) 1 128.15.155.2

  internal CorpVPN group strategy
  attributes of Group Policy CorpVPN
  value of server DNS 10.15.155.17
  VPN-idle-timeout no
  VPN-session-timeout no
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list SplitTunnel
  something.com value by default-field

  attributes global-tunnel-group CorpVPN
  address pool CorpVPNpool
  Group Policy - by default-CorpVPN
  IPSec-attributes tunnel-group CorpVPN
  pre-shared key

  Standard access list SplitTunnel allow 192.168.168.0 255.255.255.0
  SplitTunnel list standard access allowed host 202.1.56.19

  Packet-trace input outside-iDC tcp 10.15.160.18 22 202.1.56.19 22

  Phase: 1
  Type: ACCESS-LIST
  Subtype:
  Result: ALLOW
  Config:
  Implicit rule
  Additional information:
  MAC access list

  Phase: 2
  Type: FLOW-SEARCH
  Subtype:
  Result: ALLOW
  Config:
  Additional information:
  Not found no corresponding stream, creating a new stream

  Phase: 3
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  in 0.0.0.0 0.0.0.0 OUTSIDE-IDC

  Phase: 4
  Type: ACCESS-LIST
  Subtype: Journal
  Result: ALLOW
  Config:
  Access-group OUTSIDE / inside interface OUTSIDE-IDC
  access OUTSIDE list / allowed extended Interior ip 10.15.160.0 255.255.255.0 any
  Additional information:

  Phase: 5
  Type: IP-OPTIONS
  Subtype:
  Result: ALLOW
  Config:
  Additional information:

  Phase: 6
  Type: CP-PUNT
  Subtype:
  Result: ALLOW
  Config:
  Additional information:

  Phase: 7
  Type: VPN
  Subtype: ipsec-tunnel-flow
  Result: ALLOW
  Config:
  Additional information:

  Phase: 8
  Type: VPN
  Subtype: encrypt
  Result: DECLINE
  Config:
  Additional information:

  Result:
  input interface: OUTSIDE-IDC
  entry status: to the top
  entry-line-status: to the top
  output interface: OUTSIDE-IDC
  the status of the output: to the top
  output-line-status: to the top
  Action: drop
  Drop-reason: flow (acl-drop) is denied by the configured rule

  Essentially, the traffic needs to make a u-turn at ASA outside interface if I understand your configuration.

  You need the following to make it work.

  -permit same-security-traffic intra-interface

  -Host202 of the 10.15.160.0 ip access list permit 255.255.255.0 host 202.1.56.19

  -nat (OUTSIDE-IDC) 1 access-list Host202

• Transport via RDP gateway

  Hi all

  I installed on Windows 2008 R2 TGW and only access via RDP. The previous installation worked fine on an another win 2008 R2 and could access the GUI using the option/admin in RDP.

  With the recent installation cannot access the GUI at all. The only difference is the account being used, before, I had an administrator account, now I use my account with done AD part of the Administrators group.

  Can anyone suggest a fix or a solution?

  Wayne

  Hi Wayne,

  Make sure that the Windows Service 'Ineractive Services détection' is enabled and running.

  Bryan

• Remote RDP client VPN access on ASA 5510

  Hello.

  We have configured the VPN tunnel from site of offshore to the location of the customer using ASA5510 and access to RDP to the location of the customer. Also been configured remote VPN access in offshore location. But using the remote VPN client, we are able to get the RDP of officeshore location but not able to access to the location of the RDP client. Are there any additional changes required?

  Thank you

  Hi Salsrinivas,

  so to summarize:

  the VPN client connects to the ASA offshore

  the VPN client can successfully RDP on a server at the offshore location

  the VPN client cannot NOT RDP on a server at the location of the customer

  offshore and the location of the customer are connected by a tunnel L2L

  (and between the 2 sites RDP works very well)

  is that correct?

  Things to check:

  -the vpn in the ACL crypto pool?

  -you're exemption nat for traffic between the vpn pool and 'customer' LAN? is the exemption outside (vpn clients are coming from the outside)?

  -you have "same-security-traffic permitted intra-interface" enabled (traffic will appear outside and go back outside)?

  If you need help more could you put a config (sterilized) Please?

  HTH
  Herbert

• Applications of freeze for 2 to 30 seconds when the access server via RDP

  Symptom: a server running a mission critical real-time console applications work fine left unattended.

  When internet connections are stable, and admin connects to the server using the RDP Protocol, yet everything very well.

  However, sometimes the connection to the server degrades and shows of packet losses. In this case, RDP has always managed to connect, but all our applications on the server to freeze for a period of 2 to 30 seconds.

  While gel applications, the windows user interface is still usable (File Explorer, to change the active window, etc.). The updating of the display is slower, but what is expected with a suboptimal internet connection.

  Log files from various applications show that frost occurs at the exact moment in all of our applications.

  This effect occurs often, just at the moment where the connection to the server. This happens sometimes after some time, while the RDP session is in place, but the user does not interact with the keyboard and mouse.

  Repeated tests have shown, that at the time where we experience these connection problems from another machine in the world, who have own internet connection to the server, a gel occur.

  Because these freezes cause our entire production system one malfunction, this makes the administration remotely via RDP essentially impossible.

  The server is Windows 2008R2 SP1.

  Applications that freeze do NOT networking outside the local computer. Most of the applications are simple console applications.

  I have google some references to this or similar problems, however none of the effective resolutions.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows Server 2003 (64-bit), Terminal Server has 2 mouse pointers when you connect via RDP

  I recently reinstalled one of our Terminal Server Windows Server 2003 (64-bit) servers.
  When you connect via RDP, I get 2 mouse pointers. One seems to be the pointer to the session that changes of hourglass, etc... and the pointer remains under the arrow.

  I have all the updates that are installed.
  There is no options on the RDP settings like what I use on other RDP to the other Terminal server sessions and is not on any other I RDP server on my client.

  I connected as other RDP clients and get with the same problem, is not a customer number
  Is there a setting on the server to disable this option?

  How can I remove the pointer that does not change in the session?

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• Disable access working group

  I want to disable access to the computers of the Working Group, i.e. prevent some users from accessing any thing shared on the network. User type usually computer name in run or any window of the Explorer to access shared data. I want that it should be disabled while a user types IP or name of the computer to access.
  Is it possible to prevent certain users and computers to access whats shared on the network?
  I use Windows XP on all systems and all computers are connected to the "working group".

  Although I have not tried, you can try to remove the 'Client for Microsoft Networks' machines you want to access network shares.

  Go to the network, control panel right click on your network connection, and then select "Properties".

  then select "Client for Microsoft networks" in the login window and uncheck it or click on "Uninstall".

  This should remove the access to files via file sharing on other machines from this computer.  It also removes access to the printer if you print to a printer attached to another computer via a USB cable.  (It should not affect printing to a TCP/IP connected printer).  Computers should still be able to use Internet Explorer or access the internet.

  HTH,

  JW

• How to connect a MAC via RDP machine

  How to connect a MAC via RDP machine from a Windows machine.

  Hello

  I found the solution, you can use VNC viewer to access MAC machine to Windows.

  Steps to activate allow the connection to the MAC

  Go to the system preferences - click Sharing - select Remote management, click Computer Configuration

  Check these two options

  -Any person may request permission to control system

  -VNC viewers may control screen with password (enter password)

  Now the system of windows one can connect using MAC machine IP and the password

  Kind regards

  Durga

• To access the programs at startup, which could be accessed via windows defneder

  I use MSE so Defender is disabled. How to access and modify the programs that run on start up? I can't do this with the disabled Defender.

  • No error message
  • Fact no added software or hardware recently
  • Sought access via the MSE but no luck

  I use MSE so Defender is disabled. How to access and modify the programs that run on start up? I can't do this with the disabled Defender.

  • No error message
  • Fact no added software or hardware recently
  • Sought access via the MSE but no luck

  Do it this way...

  Start button > in the search box, type msconfig > press the Enter key > uac prompt > at the top, click on Startup tab > make changes > click OK when the fact of the advantages of others looking for answers, please mark as answer suggestion if it solves your problem.

• I recently installed Windows 7 and you connect via RDP.

  * Original title: activation of Aero?

  Hi, I recently installed Windows 7 and you connect via RDP. When I plugged in, I was greeted with Standard Windows, I went in tge customization panel but when I click on an aero theme, said that some parts of the theme have been disabled because I was using remote desktop. Is there a way I can enable Aero via Remote Desktop?

  Aero feature is disabled in all versions except versions ultimate and Enterprise

  Aero glass remoting

  https://en.Wikipedia.org/wiki/Windows_7_editions#Comparison_chart

• Server printing 2012 with RDP clients.

  I built a system Windows Server 2012 on a virtual server. The host OS is Centos 6, update 4 64-bit.

  I have set up firewall rules that transfer port 389 on the host to the guest system.
  Incoming users are all RDP and they participate, connect and run applications without difficulty.
  I followed the guidelines for the implementation of printer drivers. The RDP client allows the sharing of printers and works and prints with an old Server 2003 box.
  Whenever I try and print test to a local printer by using RDP, a dialog box appears. "The printer is in an error state" printing itself fair job sitting in the queue never move.
  I followed the correct procedures of windows to set up the print queues. I created their use of the software for the client OS and queues, look good and will appear on the RDP sessions as available printers.
  As A Unix gearhead, I think that the firewall is NOT the problem. In similar configurations all that I need to do to get print jobs is port 389 to the front of the windows box.
  I wonder if there is some sort of Setup Wizard, I need to run to allow printing to return to the local printer of RDP clients.

  Chances are that you'd better ask in the TechNet forums. Have you tried to disable the firewall to completely exclude it?

• How to revoke access to the client

  Hey,.

  I wonder how do I revoke access to vCO Client and give access to weboperator? Is this possible?

  concerning

  Zbyszek

  Disable access to the customer by non administrators Orchestrator

• How can I connect to a virtual machine that uses a NAT map from outside via RDP

  Hi, I'm under workstation 7.11. I have a windows xp virtual machines all use adapter NAT of VMware Workstation for connectivity. I am only able to connect to the VMs with RDP client via the host. If I try to anywhere else, I am unable to connect.

  You can use linked by a bridge instead of NAT?  If this isn't the case, you need to enable Port Forwarding on the VMnet in the virtual network Editor.  FWIW, if you do not enable Port Forwarding I recommend setting up on a VMnet custom as VMnet2 example and assign the NIC of the virtual machine.  This keep the default VMnet8 for an unaltered NAT network.

  Default port for RDP is TCP 3389

• How to stop using a local printer via the client to vdm?

  I connect virtual deskop via the vdm client that is installed on my laptop.

  Documents can be printed in the desktop when I customer connecting vdm.

  How can I config setting in vdm to stop printing via the client to vdm on my laptop?

  Thank you.

  This seems to work with disabled Print Thin client passthru:

  HKLM\SOFTWARE\thinPrint\TPAutoConnect

  Change the value of ConnectToClient for people with REDUCED mobility.

  Default for me has been AUTO

• I want to offer internet access to my client area but I am unable to give it the authorization of domain server? Please help me as soon as possible.

  I want to offer internet access to my client area but I am unable to give it the authorization of domain server? Please help me as soon as possible.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories/