Disable bios shadowing in vista

Similar Questions

• How to disable BIOS shadowing and caching on a Compaq Presario V5000

  I get this message of last week. It gives me an error message STOP with the STOP code: 0x0000007E (0xC0000005, 0xF80569F1, 0xF8C084A4, 0xF8C081A0)

  Hi Krunal2092,

  ·         Remember to make changes to the computer, after which the issue started?

  I suggest the steps from the link to the following article and check if that helps:

  How to troubleshoot a Stop error 0x0000007E in Windows XP

  If you want to disable the cloak and caching in the BIOS on your laptop then, I suggest you consult the manual that came with the laptop or contact HP for help:

  Contact HP

  Caution:
  Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  I hope this helps.

• I get a blue screen telling me to disable bios memory caching and shadowing

  I just loaded xp pro on my computer and I got a blue screen telling me to disable bios memory caching and shadowing. The error reads: * STOP: 0 x 0000000050 (0xFE9B1244, 0x00000000, 0x804FEAC9, 0x00000000

  Hello
  I think that's not the full Errormessage should include a reference to a file, but you have two options:
  1. debugging: http://msdn.microsoft.com/en-us/windows/hardware/gg463009.aspx
  and post the results here, so I can take a look at this.

  2 disable the cache and the cloak: the funtion are in your BIOS, usually under the CMOS settings.

  Kind regards
  Jan

• Instructions step by step on how to parameter on an E-Machine DISABLE bios.

  Can someone give me step by step instructions on how to DISABLE bios setting on an E-Machine T5082 using IE9 & Vista.

  This step is suggested when I get a dump for the blue screen crash page.

  Also, I get ICON rearrangments and changes of fonts when transfer between Y IM and regular Yahoo Mail Plus another program transfers the settings to lower the screen resolution.

  Apart from the above, OTHER advice or help would be greatly appreciated.

  Hi JimTrussell,

  Try to restore your system to a previous state when everything worked well.

  System Restore helps you restore system files from your computer to an earlier point in time. It's a way to undo the system changes to your computer without affecting your personal files, such as e-mail, documents, or photos.

  Check out the following articles for more information about the system restore:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

   

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

   

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

   

  Let us know if that helps.

• How can I disable volume shadow copy?

  How can I disable shadow copy of volume in windows 7?

  Hi Phil8240,

  It is not recommended to turn off shadow copy Volume. It manages and implements Volume Shadow copies used for backup purposes and others. If this service is stopped, shadow copies will be unavailable for backup and the backup may fail. If this service is disabled, any services that explicitly depend on will fail to start.

  Let us know if there is some problem that you are experiencing because of shadow copy volume, so that we can help you solve the problem.

  However, if you still want to disable the shadow copy of Volume to follow the steps below:

  1. Click Start, type services and press ENTER.
  2. Locate the "Volume Shadow Copy" service and right click and click on "Stop".
  3. close the windows Services.

  (Applicable for Windows 7) referral link: http://windows.microsoft.com/en-US/windows-vista/Manage-services-in-Windows-Vista-from-Windows-Vista-Inside-Out

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Portege M400: Could not update the BIOS after installing Vista

  Hello

  I have improved my M400 for Vista.

  I am trying to install all drivers Vista of Tosh. According to the instructions, the first thing to do is to update the bios.

  So, I download the bios (v3.60) on the site and run the .exe, but he tells me that I need the common modules.

  The only common modules that I can find on the Tosh site are for XP.

  Can anyone help?

  Thank you

  Steve

  You will probably need to update the BIOS before installing Vista on the laptop.
  Then, you could install Vista again.

• Equium A110-276: can I update the BIOS when installing Vista?

  I don't know where to post this...

  "I have a clean install of Windows Vista on my satellite A110-276. I have to update the BIOS or not? Is - mandatory/mandatory BIOS update?

  Hello

  It seems that Toshiba has released a special version of the BIOS for Windows Vista.
  If you want you can check it on the page of the Toshiba driver.

  But if your Vista runs correctly on the computer laptop with the previous version of BIOS you n don't need to update the BIOS.
  I recommend updating BIOS, if any odd operational behavior will appear.

• Disable the UAC in VISTA window

  Hello

  How to disable UAC in Windows Vista using LabVIEW Control window?

  I did this VI (see attached). This VI works, if I have manually disabled the UAC window (regedit: "Software\Microsoft\Windows\CurrentVersion\Policies\System - EnableLUA = 0 [DWORD]) of the control panel or regedit.

  If I run my VI on a computer that has ON UAC, I can't open the registry key. Although, if I manually go to regedit and
  change the variable windows EnableLUA to zero and restart the computer.
  Then, I'll be able to control this LabVIEW registry key.

  Is
  It's kind around to disable UAC only with LabVIEW. This means,
  is it possible to change the EnableLUA variable Windows when I
  previously, I have UAC running?

  Thank you

  Hi JPLO,

  If you run your VI as long as limited or in admin approval mode user, I expect not to be able to disable admin approval mode. Try right-clicking on the LabVIEW icon in the Start Menu and select "run as Administrator" and then run your VI.

  Brad

• Microsoft Security Essentials disables Windows Defender in Vista?

  Can error 0x800106ba on any attempt to open code I Defender. I also acquired McAfee at some point, but I uninstalled it hundreds of years ago but I still have the same error message whenever I try to open Windows Defender. Help, please

  It is not fair to McAfee posing problem with the Defender:

  Windows Defender:

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and should automatically disable the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  See you soon.

  Mick Murphy - Microsoft partner

  Hello, just to be sure I have the correct information, Windows Defender lights not in Windows Vista with Microsoft Security Essentials, as Essentials has its own version of the Defender.  The error code I received is the same as the previous posts in which is: 0x800106ba.  Again, just to be sure, I understand, I should stop trying to turn Defender because Security Essentials has covered it, okay?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/error-code-0x800106ba-on-trying-to-open-Windows/87cb635c-9ced-4363-9af4-8ca790179671#LastReply

  Hello

  Yes; Microsoft Security Essentials should disable Windows Defender for the reasons you mentioned.

  If she didn't turn it off, you should manually have to do it anyway.

  This information explains Microsoft explained:

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  Q: is - this installation of Microsoft Security Essentials (XP/Vista/7) disable Windows Defender?
  A: Microsoft Security Essentials should disable Windows Defender in Vista and Windows 7, and then uninstall it from XP. In some cases, this does not happen automatically.
   

  Q: what happens if I do not disable or uninstall Windows Defender, if I use Microsoft Security Essentials (XP/Vista/7)?
  A: If Microsoft Security Essentials and Windows Defender are both running, your system can know the performance degradation and other problems caused by the conflict of two services providing real-time protection at the same time.

  See you soon.

• How to disable Windows Defender in Vista SP2?

  I can't see options administrator under options.

  Hello

  are you sure it's a legitimate version of the Defender you try to turn it off?

  There are various Malware autour programs using the Defender name

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  ______________________________________________________________________________

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

  ______________________________________________________________________________

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Enable/disable the touchpad in vista?

  Enable/disable the touchpad in vista?  no option in the control panel (mouse/device manager) made such reset suggested by Medion, still no joy-all ideas, guys?

  Hello

  · What is the model number of the computer?

  · You have installed the latest drivers for the device?

  · The touchpad mouse detect in Device Manager?

  · Do you remember all the recent changes on the computer before the show?

  Your question does contain all the required information necessary for us to help you. Go back with these details to help you better.

• Disable an account in Vista

  Hello

  I created a user account for my child, but she can not access iTunes and some other applications of his account.  I think I want to deactivate his account and let her use mine.  Is there a way to disable an account on Vista without deleting?  I have a user account and an account admin for myself.

  Is there a better way to accomplish what I want to do?

  Thank you

  Hello

  Just change the password of the account and she can't use it.

  If in doubt of using the methods below first make a Restore Point.
   
  Or use these methods: method 1 is onlly for Ultimate versions, company or business. All Vista
  versions can use method 2.

  How to hide or show a Vista user account
  http://www.Vistax64.com/tutorials/94805-user-account-hide.html

  ==============================================================

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to disable windows flip 3d Vista?

  How to disable windows flip 3d Vista? It is now the default view and I want the old display in the taskbar.

  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-Flip3D-in-Windows-Vista/

  http://www.mydigitallife.info/2007/12/27/how-to-turn-off-and-disable-Windows-Flip-3D-switcher-in-Vista/

  http://www.Vistax64.com/tutorials/117627-Flip-3D-enable-disable.html

  Read the info to turn it off at the above links.

  See you soon. Mick Murphy - Microsoft partner

• I forgot the bios administrator password Vista

  I forgot my administrator password of bios with a vista operating system.  How can I fix this so that I can reset?

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  See you soon. Mick Murphy - Microsoft partner

• Satellite M65: New Bios Update for Vista?

  I have a satellite M65 and the problem is that the current bios is not 100% compatible with windows vista. Indeed, vista has not detected my card (nvidia gforce go 6600) video as well.
  Now, his work as a vga adapter.
  The question is based on 100% of the incompatibility of the bios, any idea when toshiba will come out a new bios for this machine?

  Kind regards.

  Hello Federico

  Problem is that no one knows exactly what laptop models will be supported for Vista. I put t know how it works for the laptop models to the United States, but only what you can do is to check the http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp from time to time.

  This link is for the Toshiba U.S. support page.