Disable an account in Vista

Similar Questions

• User account in Vista says disabled

  I sent my computer make repairs, and when he returned a few things happened. On the one hand, when I go to connect, it says that my account has been disable and see the administrator. But if I restart the computer, it allows me to connect. It's strange because I just change the name and the password of the administrator account (the account that I use is the administrator one). Also, when I try to go into safe mode, it tells me that I can not finish loading windows in safe mode and cannot me in the mode without failure in all the...

  Hello

  The account may be damaged.

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Disable the UAC in VISTA window

  Hello

  How to disable UAC in Windows Vista using LabVIEW Control window?

  I did this VI (see attached). This VI works, if I have manually disabled the UAC window (regedit: "Software\Microsoft\Windows\CurrentVersion\Policies\System - EnableLUA = 0 [DWORD]) of the control panel or regedit.

  If I run my VI on a computer that has ON UAC, I can't open the registry key. Although, if I manually go to regedit and
  change the variable windows EnableLUA to zero and restart the computer.
  Then, I'll be able to control this LabVIEW registry key.

  Is
  It's kind around to disable UAC only with LabVIEW. This means,
  is it possible to change the EnableLUA variable Windows when I
  previously, I have UAC running?

  Thank you

  Hi JPLO,

  If you run your VI as long as limited or in admin approval mode user, I expect not to be able to disable admin approval mode. Try right-clicking on the LabVIEW icon in the Start Menu and select "run as Administrator" and then run your VI.

  Brad

• Microsoft Security Essentials disables Windows Defender in Vista?

  Can error 0x800106ba on any attempt to open code I Defender. I also acquired McAfee at some point, but I uninstalled it hundreds of years ago but I still have the same error message whenever I try to open Windows Defender. Help, please

  It is not fair to McAfee posing problem with the Defender:

  Windows Defender:

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and should automatically disable the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  See you soon.

  Mick Murphy - Microsoft partner

  Hello, just to be sure I have the correct information, Windows Defender lights not in Windows Vista with Microsoft Security Essentials, as Essentials has its own version of the Defender.  The error code I received is the same as the previous posts in which is: 0x800106ba.  Again, just to be sure, I understand, I should stop trying to turn Defender because Security Essentials has covered it, okay?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/error-code-0x800106ba-on-trying-to-open-Windows/87cb635c-9ced-4363-9af4-8ca790179671#LastReply

  Hello

  Yes; Microsoft Security Essentials should disable Windows Defender for the reasons you mentioned.

  If she didn't turn it off, you should manually have to do it anyway.

  This information explains Microsoft explained:

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  Q: is - this installation of Microsoft Security Essentials (XP/Vista/7) disable Windows Defender?
  A: Microsoft Security Essentials should disable Windows Defender in Vista and Windows 7, and then uninstall it from XP. In some cases, this does not happen automatically.
   

  Q: what happens if I do not disable or uninstall Windows Defender, if I use Microsoft Security Essentials (XP/Vista/7)?
  A: If Microsoft Security Essentials and Windows Defender are both running, your system can know the performance degradation and other problems caused by the conflict of two services providing real-time protection at the same time.

  See you soon.

• How can know you if someone has consulted and used the default Administrator account in Vista?

  I was not aware that the default Administrator account is so easily accessible if there is no password on it. In my view, a standard user has accessed this and it seems that the computer is having a lot of problems now. Is there a way to tell? Needless to say I care that much personal info could acceded as well as commercial information.  Security, 3 administartors (users) appears in some of the boxes, and I only know 2 of them, myself and the default admin?  I'm a recruit of the computer and the other person is somewhat a geek so I could really use some help. I am the system administrator, but don't really know what to look for. I would really appreciate if some wiz could help me.

  Thank you

  Hello

  You can't find if someone has consulted and used the default Administrator account in Vista. You will need to set up a password so that no one will be able to access the admin account.

• Disabled user account control, when try to turn on the States of error message "you don't have the appropriate permissions to perform this action.

  Disabled user account control, when try to turn on the States of error message "you don't have the appropriate permissions to perform this action.

  What type of account selected for this account you upward?

  And your administrator account is now or not?

  go in Start > Control Panel > user accounts see what is written under your username.

• How can I get around having to sign into my account (Windows Vista 7) during startup as I forgat my password?

  How can I get around having to sign into my account (Windows Vista 7) during startup as I forgat my password?

  Hello Bob Zientak,.

  If a password is required to log on your system, then you won't be able to cirumvent it. Unfortunately the users of this forum are also not allowed to suggest ways to help you bypass (hack) the password (3668Microsoft Terms and Conditions).

  Remember passwords are case sensitive so maybe that you type a password in the case of bad? Did you create a password recovery disk when you created your password first? If Yes, then you must insert the password recovery disk to allow you to change the current password. If you did not create a password recovery disk then the next and more radical, opion is to re - install Windows.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How do I install sql 2008 and sql 2008 R2 on the same user account in vista

  I am trying to install sql 2008 and sql 2008 r2 on the same user account and get error message that the account cannot be used. How can I install sql 2008 and sql 2008 r2 on the same user account in vista

  Hello

  try to repost/ask in the SQL Server forums

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

• How to disable Windows Defender in Vista SP2?

  I can't see options administrator under options.

  Hello

  are you sure it's a legitimate version of the Defender you try to turn it off?

  There are various Malware autour programs using the Defender name

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  ______________________________________________________________________________

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

  ______________________________________________________________________________

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How to set the TMP/TEMP variables on account limited Vista's GUI?

  I have Vista64 Home Premium SP2.
  I would like to change the TMP/TEMP variables for my limited account in Vista.

  It is easy to do for the system account or my admin account
  (under advanced system environment variables,).

  But if I want to do the same thing on my limited account, UAC is triggered
  and the admin account variables are exposed, rather than limited.

  I then tried runas/user 'control sysdm.cpl', experiment /noprofile profile/env
  but the result is the same.

  I know that this is possible by editing the registry,
  But first of all, I would like to know MS medium to do so.

  BTW, as far as I KNOW, UNIX/Linux can have more intelligent way to elevation of privileges of the current user,
  instead of substituting another.

  HM, this seems to be the solution, it has not previously found.
  http://support.Microsoft.com/kb/931715/en-us
  http://www.Vistax64.com/Vista-account-administration/7649-setting-environment-variables.html

  Checked and use the setx command works.

• How to permanently remove a user account from Vista home premium at all times

  I have tried to delete a few old my laptop turned off user accounts and cannot do so for a reason any. I can prevent them to appear on the login screen, but they still appear in the "USERS" folder ??? Someone at - it a

  the idea that actually works?

  Hello

  Be sure to back up all files under this user account before removing.

  How to delete an account in Vista
  http://www.Vistax64.com/tutorials/93026-user-account-delete.html

  Vista: How to remove a user account
  http://www.tech-recipes.com/Rx/2054/vista_how_to_delete_user_account/

  Manage user accounts - scroll to the bottom to create a new user account
  http://www.vista4beginners.com/manage-user-accounts

  I hope this helps.

• Enable/disable the touchpad in vista?

  Enable/disable the touchpad in vista?  no option in the control panel (mouse/device manager) made such reset suggested by Medion, still no joy-all ideas, guys?

  Hello

  · What is the model number of the computer?

  · You have installed the latest drivers for the device?

  · The touchpad mouse detect in Device Manager?

  · Do you remember all the recent changes on the computer before the show?

  Your question does contain all the required information necessary for us to help you. Go back with these details to help you better.

• How to configure a different account on Vista Home Premium?

  How to configure a different account on Vista Home Premium?  I tried the windows help site, but it does not give me the steps to do so.  Please advise me if you have time.  Specifically, I want to create an account for the child so that I can restrict.  Thank you.

  How to configure a different account on Vista Home Premium?  I tried the windows help site, but it does not give me the steps to do so.  Please advise me if you have time.  Specifically, I want to create an account for the child so that I can restrict.  Thank you.

  You must be an administrator or in possession of a password for admin to create a user account.

  Start > Control Panel > Classic view > user accounts > manage another account > uac prompt > click on create a new account > follow the instructions on... For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to disable windows flip 3d Vista?

  How to disable windows flip 3d Vista? It is now the default view and I want the old display in the taskbar.

  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-Flip3D-in-Windows-Vista/

  http://www.mydigitallife.info/2007/12/27/how-to-turn-off-and-disable-Windows-Flip-3D-switcher-in-Vista/

  http://www.Vistax64.com/tutorials/117627-Flip-3D-enable-disable.html

  Read the info to turn it off at the above links.

  See you soon. Mick Murphy - Microsoft partner

• disabled user account

  Can help you with a disabled account? My friend put on a 2nd user with a password. I messed up and tried to remove this user account. Now, my old account past nonword always annoys me in the office, but I can't change programs or install updates that I am asked for a password and said it is a failure of the login that requires a password. I have Windows 7

  Ariele

  Hi Ariele,

  To disable an account, follow these steps:

  1. Click Start Menu > right click computer > Manage.

  2. Click local users and groups.

  3. Double-click the account that you want to disable.

  4. Check the "account is disabled", and then click OK.

  Let us know how it goes.