Disable/remove a black frame around document

Similar Questions

• Satellite U500-115 - black frame on his Full - HD BX2450 LED screen

  Hello!

  A few days ago, I bought a LED of Samsung BX2450 Full-HD screen.
  I connected via HDMI for best quality.

  Unfortunately the screen is not completely filled. I have a black box on the screen.

  I read on some forums where they told me to turn on "Overscan" in the ATI Catalyst Control Center.
  Unfortunately there is no such a function. :(

  Then I downloaded the new version of Catalyst of ATI. The same problem.
  Tried to return to graph-Drivers of Toshiba for U500. Once again, without success.
  I'm unable to remove this black frame and use the entire screen.

  I use the good resolution of 1920 x 1080.
  Built in graphics card is ATI Mobility Radeon HD 4500 Series if I understand! ;-)
  Windows 7-64 bit.

  Support of ATI says that Toshiba laptops are not supported by their software. 'Please contact the laptop OEM for support of the drivers for these books' (http://support.amd.com/de/kbarticles/Pages/AMDCatalyst112ReleaseNotes.aspx)

  Can you please advise me what to do?
  Y at - it an update of driver proposed by Toshiba or any other solution?

  Tanks,
  Mario

  Hey,.

  Do you use the FN + F5 key combination to switch to your external monitor?
  Also interesting would be if you extend the desktop on the external monitor or if you use the external monitor only.

  It is also important to use the native resolution of your external monitor and correct the refresh rate.
  Normally in the options of the display driver you can also adjust the image if she s not full screen.

• Black box around video (BEFORE SHIPPING)

  When I import my video from my computer in first pro, it is a big black box around it. I know that I can just UN-click on the button of uniform motion to zoom in on the video, but that reduces the quality. Is there a way to remove the black box around my video with out affecting the quality of the video?

  [Ask in the correct forum allows... Left generic Cloud/Setup forum for forum specific program... MOD]

  You probably have different resolution videos.

  Intensify or make a sequence that matches the one who has the box.

• My final document has a black box around the text. How can I remove it?

  When I receive my final signed document information text box has a solid black box around it.  Is there a way to remove it?

  Hi SimonATS,

  I thought about it!  It has been implemented in the original document, which I downloaded.  Text boxes have been set up to have a black border.

  Thanks anyway!

• Diagonal Bars - black frames

  

  It is a project I did a year ago.  I recently opened it to make some output and found that many of the clips had their end portions covered with these black diagonal lines, and the underlying video was black frames.  This project was created in CS5 and I reopened it in CS5.  Clip lengths, including the bars seem to match the audio correctly it seems content in slightly shorter East.  Nothing is locked or disabled and trying to re-import the clip with no effect.

  Any help would be greatly appreciated.  Thank you!

  These lines are called rays of Danger, and they indicate that the multimedia documents related to a period is shorter than the timeline instance.  You need to troubleshoot the source media and discover why Pr no longer loves him.

  Jeff

• Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 firefox browser. You want to disable/remove the navigation bar. Pls Hlp

  Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 version of the Firefox browser.
  I want to disable/remove the navigation bar of the browser window, making the browser works like the kiosk mode.

  Help, please

  Thank you
  Vishal.

  your profile folder is a subfolder of C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\ and something like < randomstring > .default label - folder chrome with the userChrome.css file must go in this folder .default < randomstring > .

• How can I get rid of the black border around my screen?

  After an update, my screen resolution changed for no reason. Tried to change, but now I have a black border around my screen that I can't get rid of.

  Hello

  Windows Update will sometimes offer you updates of graphics drivers; NEVER accept them.

  Only go graphics drivers of your computer or the manufacturer of the graphics Web site map.

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  Then try to change the screen resolution.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here is the information on the Windows updates.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Black frame break in first / Inverted &amp; Shifted frame SpeedGrade

  PROGRAM:

  First Pro CC (2015.3)

  Last updated: September 27, 2016

  INSTALLATION PROGRAM:

  Chronology of 1080 / RED EPIC images. R3D files.

  QUESTION:

  Black frame break in first / Inverted & Shifted frame SpeedGrade

  I have encountered this problem after changing the settings of the source (shifted the balance of whites around all clips in the timeline). While color correction through direct link to SpeedGrade. The video would play very well, but when I stopped the video that the chassis of the break would be inverted colors, shifted to off on the side. I turned back on then to first and these same clips would be just black when paused. The thing is that I changed the parameters of the source on all clips, but only some are struggling.

  SOLUTION ATTEMPTS:

  I tried to reset all the settings of source for each clip back to "as shot", but the problems remain.
  
  The only work around I could find, (after trying everything!) was a right click on the clip, by selecting "Render and replace...". "This seemed to be the solution until I exported the sequence and the project fails each time once he hit these clips of issue.

  Help, please!
  Leo

  That's what I called at the beginning of this.

  Adobe PrPro CC 2015.0/1/2 were versions of project PrPro 9.x file.

  However, rather than release the next major release as CC 2016, they did something that broke so MANY of their users and has not yet said what it was they were doing. It is... irritating?

  2015.3 and now 2015.4 are project files built on version 10.x of the software... a major version upgrade! ... and not only a minor or 'dot' upgraded because they seem to be.

  They has not not wanted to bring SpeedGrade long... and without announcement, out 2015.3 with no command 'Send to SpeedGrade' Direct Link or process. When people immediately started screaming on this subject, they finally announced they don't think their number, many people used SpeedGrade and seems not worth it to upgrade to the new version...

  And... we are all invited to back to back like Olde to ranking through export EDL SpeedGrade and two folders of the media on this EDL in Sg, or export a flattened the chronology of project to go to Speedgrade too... then of course, export of another SpeedGrade file and replace the track flattened on the timeline with the media graduated.

  Or export a XML file from PrPro and taking to say the determination, along with... still... two media files or file flattened chronology. Do a power of attorney to the export process again (not the clever internal proxy thing) could also help, by using a flat file support to proxy, then re - link that to the original in PrPro media to complete the round trip.

  That all sounds easy enough, right? ....

  Of course, the other option is to simply use the new workspace of color, with the Group of workspace Lumetri clever UI. Which is really very good and very capable, especially if you are using a control box remote as the tangent of ripple or small Palette blocks. Or... a tangent Panel Elements, really nice but rather in the cost. It is quite achievable through the mouse, but a lot spiffier... more intuitive and able to work more fine, with a control surface.

  Now he's advantages and disadvantages. For works of single clip or a few clips that need really not correspondence of accurate shooting, it is very easy, convenient & fast enough. If you really tight & decently fast shot correspondence between a couple hundred shots, or several secondary, uh... it's... possible... but rather slow, shall we say, than SpeedGrade. In addition to not having a button/process corresponding to the shooting as SpeedGrade, you don't have a real 2-top monitor situation either. You can make sort of a up-2 workspace by using a new job - the separate Panel and plopping monitors reference and reading about it, using the chronology of reading in the reference monitor to define who discovers and main sequence to set the monitor of the program to the item you try to classify and to match that in the reference monitor... or... not.

  For MANY more small, simple projects, the Lumetri Panel is very very good. In pretty rough tests today, I would say the secondary Panel in the Panel of PrPro Lumetri is actually better to pull a tight key than SpeedGrade 2015.1, the latest release of SpeedGrade. Not a lot, but... a little better.

  And you can "stack" Lumetri as of the 'effects' on a clip, to get more secondary or make different parts of the process in different stages... However, the full workspace not Lumetri works with the latest projection (bottom) Lumetri in the effect controls panel, so for instances "earlier" on a clip, you go in the PCE, spin to the bottom of Lumetri effects and use these settings. And... your surface outdoor spiffy won't work with everything, but the last of them either. Huh.

  To move, you can use adjustment layers stacked above the clip, simply go to the color workspace, use the controls there and always Lumetri not use your surface. And Lumetri Panel with your mouse or pentab.

  Order of procession always things, so don't forget... in the effect controls panel, things are top of the process down. Among the witnesses of Lumetri, which also means descendant. Treatment of tips in the Basic tab, then stuff in the Design tab and down.

  Now... also as mentioned in a previous post... There is a nice 3rd party tool/applet a user of SpeedGrade Austrian colleague, Patrick something or other, for about 9 Euro... open, navigate to a project file PrPro, as records and converts the file into changing a (one) character... you use this file in 2015.1 SpeedGrade who thinks it's a file link Direct 2015.2 and therefore correct... and after completing , the application may then re - convert the file 'up' by changing this 1 a character return if 2015.4 sees it as its own file again once and not an earlier version which has need to upgrade.

  Fast... easy.... and seems to work well, with a caveat... AfterEffects "comps" do not always, so if you have those who, rather than to make a model of dynamic links in PrPro, make a direct export of the AE and use the clip exported on the timeline in Prpro.

  I haven't handled files r3d via this of course, but... others have probably, like hundreds of downloads of that file would probably include some red media users. Then I guess it would work, and you are welcome to try a trial download and see if it works for you. I just worked on a project today using this process, btw.

  It is mentioned in this link... and there is a LOT of information about this and other things of the recent changes in the nets of ten or higher in this forum.

  Project of creation/Speedgrade conversion tool

  Neil

• How can I get rid of the black box around the exported video?

  I am importing video recorded with OBS in resolution 1920 x 1080. Watch the video, it seems fine. But once I run the video in Adobe first Elements 9, when I export it as a file .m2t in resolution 1920 x 1080, it has a thick black box around the video. The video source is in .mp4 format. Can someone help here?

  Versions prior to version 11 of Premiere Elements must have their projects manually configured to match the source media.

  Start a new project, in the project Panel, click settings and select project settings that correspond to your video specifications. This can be difficult because you are not editing video camcorder but the video which is produced by a third-party software. You will probably need open a sample of this video G Spot or Media Info in order to get the exact resolution, the frame rate and audio and video codecs that are in use - and, in the Premiere Elements 9 version, these codecs are not fully supported.

  You can try the free download of version 13 and see if it works better with your video. Earlier versions of the software were much greater with sources video camcorder and non-standard.

• How to remove the white outline around cursor?

  Is there a way to remove the white outline around the black slider? For example, the reticle on the selection tool is black, but they have a white outline around the central point and 4 lines. How can I remove this outline in white? The outline makes it much more difficult to be precise with the cursor. (I use Photoshop CS6 on Windows 7).

  I don't know other settings for the sliders as those in the preferences.

  If I'm working on a bright image, I hardly notice the bright outline.  I use the browser to zoom in before, so for me, the selection is very precise.  And of course, I almost keep everything in separate layers.

  Nancy O.

• How to remove the black bars after image rotation

  I am very new to the use of first pro. I took a video with my smartphone like the contents of a project.  The original size is 1280 wide and 720high.  I imported the video and needed to rotate 90 degrees.   Instead of the scale I need tall. I imported and then under effects control - motion - rotation to rotate how I wanted.

  But now on the screen has black bars on the sides from the turn, and when I export the video basic settings is grayed out so I can't change it. It is game/set at 1280 x 720 with black bars.

  How can I remove the black side bars in first pro to fit the dimensions of the video shot recently?

  Great! I'm glad to hear it. Thank you for the presentation of reports. If you don't mind, please mark my answer as "Correct".

  The reason for which the clips were 56% was so that they would hold the frame of landscape size. Once they were they belonged, they were happy to 100%.

• Black border around all the images from my video.

  I'm new to the forum here and am struggling to find an answer to my problem and I was wondering if someone could help me. I use elements adobe first 9 create a photo slideshow.  I have about 90 photos, with several of them and audio text throughout all this.  I don't know very well this program, I used it once to make a video.  When it's over, I burn it to a dvd.  The problem I have is that when I burn it to a dvd and play in my dvd player, the photos are of size reduced and there is a black border around them (all 4 sides).  Do you know what I can do to make it go away?  The last video I had not so I'm not sure what I did with this one.  And I tried to compress images and it changed nothing.

  Thank you very much!

  Alisha

  Lish8,

  If some of the stills are smaller than the size of the frame of the project, you will want to either their scale exactly, if required for the extensions to match, or you want to use the default size of the image scale, but take note: scale to the size of the picture by default dimensionnera only the size of fist to the rider, so if the Ratio of Aspect is off say that Images are in 16:9 and image of the project size is 4:3, you'll still have a few black bars.

  If the Images are close, I would say that you are using the fixed effect > Motion > scale, to increase the scale, so that the scope of the draft framework is filled on all sides. It will be actually reframe the view of the stills to the Aspect Ratio of the size of the image of the project. If you don't harvest like that effective, simply adjust the fixed effect > Motion > Position, to get a better harvest.

  The holds of same for still Images, which are a bit larger - I would manually scaling those to match the project frame size.

  That's why Steve recommends a slightly larger Image, that the size of the frame of the project - it gives you a bit of room for manoeuvre, in the final scale and Position.

  Good luck

  Hunt

• Black frames at end of animated gifs

  When you make banners using AE to convert 3 to 5 seconds of video in animated GIF, I noticed that there are always black frames at the end that appear each time the banner is played repeatedly. However, these frameworks do not seem to occur if the output is swf files. Y at - it a medium format or source to work around the problem of black frames with animated gifs? I not had this problem with other software gif animated, that I used, but the quality of the EA is better, other than this issue. Appreciate help with this.

  Just checked the help files and the SOUL supports animated gifs but only on Windows. Sorry I missed it.

  If you get black images at the end, then simply adjust the point of exit in the SOUL. You probably see a set cadence match. Fix you this in AE and not a SOUL.

  Useful for Animated Gifs should have a very low number of executives and a slow pace to be useful. 3 seconds to 29.97 FPS will make a big enough file for a banner size. Not see the project, but looking at the description I was wondering if your comp is 29.97 FPS, but you've made your gifs at 15 frames per second or even lower. If this is the case, that the black frames at the end could easily be the result of some funky things going on with the gif rendering engine.

  I still maintain my suggestion to use a film in Photoshop. Most of animated gifs that I created require different lengths for different periods. I'll start with 5 frames a.1 seconds for a transition, then hold the 6th framework during 6 seconds, then the transition to slide with 1 more pictures a.1 2 second, then the frame h 17-6 seconds and 12 seconds of animation gif with 17 images. You can't do that with the SOUL, you would end up with an animated gif with 120 frames for the same thing.

• Black keyline around an INX file image

  Hello. Got a strange, every time a file, InDesign CS3 to save on a CS2 compatible file, that I get a keyline added to all images. Is it a setting I can disable somewhere, or a known bug?

  Black frames are symptom of opening an INX to a non fully patched installation ID CS2. Install the latest update.

  Bob

• Can't disable/remove user guest - El Capitan

  I'm on a late 2013 iMac 21.5 inch El Capitan running.

  I can't disable/remove a user account called. The minus sign "-" is grayed out.

  It seems that this "guest user" account is also that stop me to upgrade to Sierra but that's another topic.

  Thanks for any input.

  

  I have exactly the same on all my systems regardless of the version of the OS. It's normal. This account is owned by the system, so you cannot remove it. It will affect your facility Sierra as there has been no impact on me.