Diagonal Bars - black frames

Similar Questions

• Impossible to disable the menu bar black in El Capitan

  An application that I used works option "menu bar black" of OSX and while I like it better than the light menu bar some of my menu icons are not visible in dark mode and so I would like to disable. However, the problem is that I can't. Whenever I have untick "use the menu bar black and anchor" setting in system preferences > general, nothing happens. Then when I close the system preferences and open it again, I find that the box is checked once more. (I also uninstalled all traces of the original application that made that change, reinstalled, tried to turn the option off, clear again, etc. - all without success).

  I tried to check in the Library/preferences /. GlobalPreferences, but it doesn't seem to be an option for this setting (while I can see the setting to hide the menu bar).

  Any ideas?

  Try

  remove parameters by default g AppleInterfaceStyle

• Satellite U500-115 - black frame on his Full - HD BX2450 LED screen

  Hello!

  A few days ago, I bought a LED of Samsung BX2450 Full-HD screen.
  I connected via HDMI for best quality.

  Unfortunately the screen is not completely filled. I have a black box on the screen.

  I read on some forums where they told me to turn on "Overscan" in the ATI Catalyst Control Center.
  Unfortunately there is no such a function. :(

  Then I downloaded the new version of Catalyst of ATI. The same problem.
  Tried to return to graph-Drivers of Toshiba for U500. Once again, without success.
  I'm unable to remove this black frame and use the entire screen.

  I use the good resolution of 1920 x 1080.
  Built in graphics card is ATI Mobility Radeon HD 4500 Series if I understand! ;-)
  Windows 7-64 bit.

  Support of ATI says that Toshiba laptops are not supported by their software. 'Please contact the laptop OEM for support of the drivers for these books' (http://support.amd.com/de/kbarticles/Pages/AMDCatalyst112ReleaseNotes.aspx)

  Can you please advise me what to do?
  Y at - it an update of driver proposed by Toshiba or any other solution?

  Tanks,
  Mario

  Hey,.

  Do you use the FN + F5 key combination to switch to your external monitor?
  Also interesting would be if you extend the desktop on the external monitor or if you use the external monitor only.

  It is also important to use the native resolution of your external monitor and correct the refresh rate.
  Normally in the options of the display driver you can also adjust the image if she s not full screen.

• Why the Word icon changed on just this computer - new Word icon with an area gray at the bottom left with a diagonal bar or a pencil?

  Last week, one of our machines (34 bit) Vista has begun to view Word files by an icon which ranges from normal Word icon.  This strange Word icon has the normal Word icon with a gray area at the bottom left.  In the grey area is a diagonal bar or a pencil.  (Too small to see clearly).

  It seems to behave like a normal Word document, but the icon is different.  When double click on the file, it opens Word application normally.  It prints as expected.  If I find a Word file on the server, the icon of the file word seems normal.  Once I move the computer, afterwards, the change icon.  For some, it changes shortly after I saved the document on the new computer.  Sometimes, the icon does not immediately change, and sometimes it does.  Sometimes, the icon changes after the updating of the computer.

  I was told what happened after an update of Microsoft, but I can't check.  This computer has a Word 2007 (which has been updated to Word 2003 several months ago) and is running on the Vista operating system.

  We tried to restore the computer to last week, but he did not.  Message:
  "System restore was not entirely successful.  The system files and settings on your computer did not change.
  Details:
  An unspecified error occurred during system restore. »

  Hi Super_Ego,

  Welcome to the Microsoft Answers site!

  I suggest you try the following steps.

  1. click on start and then click Control Panel-> click the default programs->, and then select the set Associations tab.
  2. locate .doc or another Office Word on extensions and select change program.
  3. search for Microsoft Office Word, and then click OK.

  Check if the word file is back to normal.

  If this does not work, I suggest to create a test user account and check if the settings file for the word files are normal.

  Check out this link that talks about How to create a user account in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Let me know if it worked.

  Kind regards
  Karena R - Microsoft Support
  ___________________________________________________________________________________________

  Visit our Microsoft answers feedback Forum and let us know what you think

• Black frame break in first / Inverted & Shifted frame SpeedGrade

  PROGRAM:

  First Pro CC (2015.3)

  Last updated: September 27, 2016

  INSTALLATION PROGRAM:

  Chronology of 1080 / RED EPIC images. R3D files.

  QUESTION:

  Black frame break in first / Inverted & Shifted frame SpeedGrade

  I have encountered this problem after changing the settings of the source (shifted the balance of whites around all clips in the timeline). While color correction through direct link to SpeedGrade. The video would play very well, but when I stopped the video that the chassis of the break would be inverted colors, shifted to off on the side. I turned back on then to first and these same clips would be just black when paused. The thing is that I changed the parameters of the source on all clips, but only some are struggling.

  SOLUTION ATTEMPTS:

  I tried to reset all the settings of source for each clip back to "as shot", but the problems remain.
  
  The only work around I could find, (after trying everything!) was a right click on the clip, by selecting "Render and replace...". "This seemed to be the solution until I exported the sequence and the project fails each time once he hit these clips of issue.

  Help, please!
  Leo

  That's what I called at the beginning of this.

  Adobe PrPro CC 2015.0/1/2 were versions of project PrPro 9.x file.

  However, rather than release the next major release as CC 2016, they did something that broke so MANY of their users and has not yet said what it was they were doing. It is... irritating?

  2015.3 and now 2015.4 are project files built on version 10.x of the software... a major version upgrade! ... and not only a minor or 'dot' upgraded because they seem to be.

  They has not not wanted to bring SpeedGrade long... and without announcement, out 2015.3 with no command 'Send to SpeedGrade' Direct Link or process. When people immediately started screaming on this subject, they finally announced they don't think their number, many people used SpeedGrade and seems not worth it to upgrade to the new version...

  And... we are all invited to back to back like Olde to ranking through export EDL SpeedGrade and two folders of the media on this EDL in Sg, or export a flattened the chronology of project to go to Speedgrade too... then of course, export of another SpeedGrade file and replace the track flattened on the timeline with the media graduated.

  Or export a XML file from PrPro and taking to say the determination, along with... still... two media files or file flattened chronology. Do a power of attorney to the export process again (not the clever internal proxy thing) could also help, by using a flat file support to proxy, then re - link that to the original in PrPro media to complete the round trip.

  That all sounds easy enough, right? ....

  Of course, the other option is to simply use the new workspace of color, with the Group of workspace Lumetri clever UI. Which is really very good and very capable, especially if you are using a control box remote as the tangent of ripple or small Palette blocks. Or... a tangent Panel Elements, really nice but rather in the cost. It is quite achievable through the mouse, but a lot spiffier... more intuitive and able to work more fine, with a control surface.

  Now he's advantages and disadvantages. For works of single clip or a few clips that need really not correspondence of accurate shooting, it is very easy, convenient & fast enough. If you really tight & decently fast shot correspondence between a couple hundred shots, or several secondary, uh... it's... possible... but rather slow, shall we say, than SpeedGrade. In addition to not having a button/process corresponding to the shooting as SpeedGrade, you don't have a real 2-top monitor situation either. You can make sort of a up-2 workspace by using a new job - the separate Panel and plopping monitors reference and reading about it, using the chronology of reading in the reference monitor to define who discovers and main sequence to set the monitor of the program to the item you try to classify and to match that in the reference monitor... or... not.

  For MANY more small, simple projects, the Lumetri Panel is very very good. In pretty rough tests today, I would say the secondary Panel in the Panel of PrPro Lumetri is actually better to pull a tight key than SpeedGrade 2015.1, the latest release of SpeedGrade. Not a lot, but... a little better.

  And you can "stack" Lumetri as of the 'effects' on a clip, to get more secondary or make different parts of the process in different stages... However, the full workspace not Lumetri works with the latest projection (bottom) Lumetri in the effect controls panel, so for instances "earlier" on a clip, you go in the PCE, spin to the bottom of Lumetri effects and use these settings. And... your surface outdoor spiffy won't work with everything, but the last of them either. Huh.

  To move, you can use adjustment layers stacked above the clip, simply go to the color workspace, use the controls there and always Lumetri not use your surface. And Lumetri Panel with your mouse or pentab.

  Order of procession always things, so don't forget... in the effect controls panel, things are top of the process down. Among the witnesses of Lumetri, which also means descendant. Treatment of tips in the Basic tab, then stuff in the Design tab and down.

  Now... also as mentioned in a previous post... There is a nice 3rd party tool/applet a user of SpeedGrade Austrian colleague, Patrick something or other, for about 9 Euro... open, navigate to a project file PrPro, as records and converts the file into changing a (one) character... you use this file in 2015.1 SpeedGrade who thinks it's a file link Direct 2015.2 and therefore correct... and after completing , the application may then re - convert the file 'up' by changing this 1 a character return if 2015.4 sees it as its own file again once and not an earlier version which has need to upgrade.

  Fast... easy.... and seems to work well, with a caveat... AfterEffects "comps" do not always, so if you have those who, rather than to make a model of dynamic links in PrPro, make a direct export of the AE and use the clip exported on the timeline in Prpro.

  I haven't handled files r3d via this of course, but... others have probably, like hundreds of downloads of that file would probably include some red media users. Then I guess it would work, and you are welcome to try a trial download and see if it works for you. I just worked on a project today using this process, btw.

  It is mentioned in this link... and there is a LOT of information about this and other things of the recent changes in the nets of ten or higher in this forum.

  Project of creation/Speedgrade conversion tool

  Neil

• Images often open bridge in the form of black frames without content.

  Images often open bridge in the form of black frames without content. The image may appear when enlarged or reduced, but in normal view, the framing will be black. The only way I am able to fix this problem is to restart photoshop. What can I do to prevent this?

  Have you tried turning off your GPU in Photoshop and perhaps also Bridge preferences?

• 14 CC Media Encoder renders with black frame at the end

  Hello

  my Media Encoder running on Mac Yosemite is a black frame at the end of the h264 clips...

  How can I fix?

  Thank you

  I just understood - it might be a problem with quicktime player...

• Gaussian blur effect causing of the black frames when rendering.

  I'm only using an effect in my video, it is the Gaussian blur, and in the Viewer, it shows the effect, but it shows black frames randomly within the Builder Preview, I thought it was just a random previewer problem.

  I then made the video but when the blur effect is applied is to show black executives at random in the video.

  Talked to customer support and found out it was an effect of Gaussian blur twice on the same chassis as the cause for trouble some sigh *.

  But thanks for the info on the media cache, I did know about this.

• CS6: Unique black frame between two elements should not be here...

  Hello

  I hope that someone will be able to answer this question.

  I have two clips in my calendar that I broke together, on the timeline there seems to be a gap and still when I advance frame by frame a single black frame appears.

  I tried to cut a frame outside each of the clips but the black frame always appears.

  Here are a few screenshots to clarify (I'm completely on the timeline zoom).

  It is the last image before the split

  This is where the two clips join

  It is the first image after the split

  I would appreciate any help/advice anyone can offer!

  P.s. I'm under first CS6 on Mac OSX 10.8.3 (Mountain Lion)

  Thank you!

  A recent discussion with a similar problem:

  Stabilizing warp CS6 scales down to the last image

  http://forums.Adobe.com/message/5170132

• Black frames at end of animated gifs

  When you make banners using AE to convert 3 to 5 seconds of video in animated GIF, I noticed that there are always black frames at the end that appear each time the banner is played repeatedly. However, these frameworks do not seem to occur if the output is swf files. Y at - it a medium format or source to work around the problem of black frames with animated gifs? I not had this problem with other software gif animated, that I used, but the quality of the EA is better, other than this issue. Appreciate help with this.

  Just checked the help files and the SOUL supports animated gifs but only on Windows. Sorry I missed it.

  If you get black images at the end, then simply adjust the point of exit in the SOUL. You probably see a set cadence match. Fix you this in AE and not a SOUL.

  Useful for Animated Gifs should have a very low number of executives and a slow pace to be useful. 3 seconds to 29.97 FPS will make a big enough file for a banner size. Not see the project, but looking at the description I was wondering if your comp is 29.97 FPS, but you've made your gifs at 15 frames per second or even lower. If this is the case, that the black frames at the end could easily be the result of some funky things going on with the gif rendering engine.

  I still maintain my suggestion to use a film in Photoshop. Most of animated gifs that I created require different lengths for different periods. I'll start with 5 frames a.1 seconds for a transition, then hold the 6th framework during 6 seconds, then the transition to slide with 1 more pictures a.1 2 second, then the frame h 17-6 seconds and 12 seconds of animation gif with 17 images. You can't do that with the SOUL, you would end up with an animated gif with 120 frames for the same thing.

• Disable/remove a black frame around document

  Is there anyway to disable temporary the black frame around a document?

  Sometimes when I draw it irks me to have this frame. Of course, I can do a larger document, but sometimes, I realize account of the document is not big enough and I want to go outside, then it would be nice to temporary remove it.

  Furthermore, is it possible to change the size of a document, once it is created?

  Joan,

  View > hide the artboard.

  You can still file > Document Setup and change different things. In more recent versions, you can use the tool to work plan.

• Screen becomes random screen bars black green or striped color, then autoreboot on iPod.

  My iPod touch randomly has a Visual problem (a screen fastly melted in small green bars covering most of the screen while a black screen on the other, or scratches to the screen upward with normally white bars and black.) then the iPod resets itself automatically. Is it possible to fix this, or do I need professional help?

  I have no idea how it started, and it started 4 - ish days.

  No applications have been uploaded in the last 30 days before this happened.

  Model ME978LL/A

  Verdon 9.21 (13D 15)

  22/27,2 GB used

  Not sure if the associated or useful, but I had a sporadic load calendar at the same time, it started. Internal clock does not change its time unless done manually (still do not check the downtime) while in offline mode. Bluetooth does not work, WiFi will blink on and out, disconnecting at random the router, and reboot didn't help.

  It sounds to me like your device is very sick and dying, or in need of professional help.

  I make an appointment at your local apple store and ask them to look at.

• Unique black frame

  Hello

  For some reason any, when I start the capture process, the structure of loop of producer/consumer below gives me the first image as being black (empty) with all following frames works very well. I don't know exactly why it does this. Any input would be greatly appreciated. Thus, the framework before it collects information about the exhibition or the gain of the camera and how many images is to grasp, should not really affect the capture process.

  Konstantine

  

  Konstantine salvation,

  The reason why you found it is a problem with the data flow, you put an element in the queue until the copy buffer image is completed. Try to combine all the sons of the error in the upper loop to enforce data streams.

• bars Black around like tube video you...

  I put cd in last night to play this game I think that he messed up in my video, I get black lines... At each end like youtube. not the full screen...

  Hello recycle5,

  1. what type of program you are using to play videos on your computer?

  If you use Windows Media Player, I suggest that you change the resolution on Media Player and check if you have the same problem.

  a. open Windows Media Player.

  b. play the movie that you want to remove the black bars.

  c. right-click on the video during playback.

  d. move the mouse on 'Video size', then select 200 percent. Then right click the video again and click on 'full screen '. This puts the video in full screen and removes the black lines on the video.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Definition of diagonal Bars in a Rectangle in Illustrator

  Hi everyone, in Illustrator, how to make a shape with the points that will point to pint in another form?

  For example, I'm flags, when a flag has a bar diagonally like in Scotland and the Jamaica bar width is defined by the flat or horizontal pose and then it is located diagonally on the flag, with its Center through the center of the flag [rectangle] and its ends focused on the corners.

  How to define a horizontal bar to be a certain width (flat) and set it to be centered along the diagonal of a certain form and with its length defined by the corners of the rectangle?

  Any help much appreciated

  Gareth

  PS. I made an example of what I'm trying to make here an exact place. It can be done easily in an exact square because you just made the bar 45 degrees, but in doing so it points the way to the center of the white bar (which I put it there myself exactly in the middle) are still not at the corners of the rectangle, diagonal so the length of the bar is not set.

  

  Gareth,

  You can (guides are your friends):

  (1) create a straight path, with a weight of time equal to the width of the bar, very close from one corner to the other, and then with the direct Selection tool, drag endpoints to coincide with the Anchor Points of the corner,

  (2) object > path > describe strokes,.

  (3) create a copy of the background rectangle (Ctrl / Cmd + F).

  (Select 4 2)) and 3) and Pathfinder > intersect shape areas (or whatever it is called in your version result in overlap between Forms, you may need to press Alt/Option to make a simple way).

  To create the bar crossing, you can:

  4 select 5)) and object > transform > reflect a copy (vertically or horizontally).