Disable "Snapshot memory of the machine.

Similar Questions

• Can I write data to the memory of the Machine (not SD card)?

  Can I write data to the memory of the Machine no SD card?

  I know that I add data using FileConnection like this

  FileConnection fc = (FileConnection) Connector.open ("file:///SDCard/"+"da.txt", Connector.READ_WRITE);

  This is the code that write to the SD card.

  But if I want to write in the memory of BlackBerry, what path will be in the FileConnection?

  Or is it impossible to add files in the memory of BlackBerry?

  It will be something like "file:///store/home/user/".

• Cannot delete the snapshots or migrate the machine

  4.1 VcenterServer

  ESX 4.1

  Hello

  I'm trying to migrate a couple of virtual machine using Storage Vmotion

  VCenter Server says "a general error has occurred:"the machine virtual virtual disk in link mode cloned preventing migration.

  My question is, what is this linked clone mode?

  and how do I remedy this situation without destroying the data?

  Im guessing that this means that vmdk files are in different places when the virtual machine itself is stored?

  How can I migrate this virtual machine properly?

  Thank you

  do this way, turned it off, cancel the registration of the machine and enrol him in again and do storage vmotion or

  power it off, cancel the registration of the virtual machine, move to the desired location and enter the vm and power on.

• Disable virtual memory Windows server 2012 R2

  Is it good to disable virtual memory for the specified windows OS?

  We are running an application that uses the JVM, the enforcement community suggests that disable us virtual memory for good performance. I know it's easy to do in linux, but want to confirm if its good to do the same thing under windows and recommended?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• new time machine snapshots copied to the old directory of the machine not recognized

  I had a time Capsule 2 TB which showered, and I started a new backup (a USB key) by mode Apple drive. It took me a while to return to deal with the old clichés left on my Time Capsule. I found nothing specific online to tell me how to deal with this, so I made a few decisions naïve. I've disabled the Time Machine, renamed my new store backup and copied over the old store backup on the new backup drive time Capsule. Then in a Terminal on the command line, I mvhad snapshot directories in the newly copied backup of the old backup store store renamed folder. NOTE: On this site, I learned about a Time Machine of assistance called bypasscommand, and I needed to use it to move the Flash files in the command line:

  $ sudo mv 2016-09-17-211302 /System/Library/Extensions/TMSafetyNet.kext/Contents/Helpers/bypass.

  .. /.. /Backups.BackupDB/MyMachine /

  At this point, I thought: well, now, I have all my old and new pictures in the active backup store on the local USB drive. Then I turned on the Time Machine, and the first backup failed:

  "An error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk. »

  Then I noticed that Finder shows only most original snapshots while in the Terminal, I see all snapshots using the ls command. All snapshots have the same names in fashion and the owner/group permissions. So, why don't Finder shows all snapshots and why is Time Machine unhappy?

  Given that I can't modify my own * post, here are the corrections and updates of the original:

  I had a time Capsule 2 TB which showered, and I started a new backup (a USB key) by mode Apple drive. It took me a while to return to deal with the old clichés left on my Time Capsule. I found nothing specific online to tell me how to deal with this, so I made a few decisions naïve. I've disabled the Time Machine, renamed my new store backup and copied over the old store backup on the new backup drive time Capsule. Then in a Terminal on the command line, I mvhad snapshot directories in the newly copied backup of the old backup store store renamed folder. NOTE: On this site, I learned about a Time Machine called command help work around, and I needed to use it to move the Flash files in the command line:

  $ sudo mv 2016-09-17-211302 /System/Library/Extensions/TMSafetyNet.kext/Contents/Helpers/bypass.

  .. /.. /Backups.BackupDB/MyMachine/

  At this point, I thought: well, now, I have all my old and new pictures in the active backup store on the local USB drive. Then I turned on the Time Machine, and the first backup failed:

  "An error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk. »

  Then I noticed that Finder shows only most original snapshots while in the Terminal, I see all snapshots using the ls command. All snapshots have the same names in fashion and the owner/group permissions.

  Then, I thought that the Finder was confused somehow. I turned off Time machine and ejected from the USB drive. When I plugged back it it, of course now Finder shows all snapshots. The tmutil listbackups command confirms also all snapshots. I started a new backup, but it has not yet.

• What is better - a snapshot of the machine powered on or off?

  Hi people

  Can someone tell me what is the best when taking snapshots of a virtual machine... or not?

  I tried one on today and could see the process and the file become approximately 130 mb in size. Then I took one with the machine off and I couldn't see the progress and it became only a few KB in size?

  Can someone enlighten me please!

  mehart

  When you take a snapshot of a VM under tension, VMware also takes a snapshot of the current memory. -In addition to other things - is stored in the file vmsn. Usually, I take snapshots of my VM Workstation when (if possible) turned off.

  André

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• Snapshots - how to save the State of the machine before deleting

  Hello

  We have a production VM on a cluster host ESXi5, which was taken earlier (nearly 2 years?). Of course, I want to get rid of the snapshot that he shouldn't have spent so long, and after some research, I'm pretty sure deletion will do what I want (I want to keep the virtual machine, as it is now with all the changes since the snapshot).

  However, I also want to take every possible precaution before to do this because if the changes are cancelled (i.e. if returned to the State of origin before the change), it will create a good amount of work, and I want to keep the virtual machine, as it is currently before deleting the shapshot.

  Is this possible? I read cloning will not clone the snapshot of the files themselves, but the cloned VM will contain changes since shapshot has created or will it be the VM before the snapshot? If the clone itself is a copy of the current computer running (changes since snapshot included), this could be an OK option.

  I don't think another solution could be to stop the VM and copy the VMWare real files somewhere - would this work?

  I am probably being a little cautious with this, but I'm a little nervous about snapshots and I want to make sure that I have all the bases covered... just in case...

  The virtual machine is saved so as a last resort I can restore from a backup, but I would rather avoid this path if possible.

  See you soon,.

  Tim

  This snapshot that one is associated with your virtual machine, which is 2 years old?

  what you think is right about removing it. If you just run this snapshot delete operation, it will merge delta with basic disk (since you instant is very ancient, the size of your delta is probably very much, in this case, this operation may take up very much time to complete) and resulting VM will be your last VM with all changes made after this snapshot was taken too.

  At the time of the snapshot, Deleting, you must also remember that there should be enough space available in your data store where you VM resides, if possible to reach downtime, then make the deletion of the snapshot while VM is powered off, or try opening the process during off-peak hours.

  I'm sure you might have encountered following KB already as you have done enough research on the topic

  VMware KB: Delete all snapshots and consolidate Snapshots feature FAQ

  I read cloning will not clone the snapshot of the files themselves, but the cloned VM will contain changes since shapshot has created or will it be the VM before the snapshot? If the clone itself is a copy of the current computer running (changes since snapshot included), this could be an OK option.

  Cloning will also do the job. Yes cloned VM will be for blocks of basic disk and disk from Delta and merger while then resulting VM cloning will be having only basic disc with all changes that you made after the snapshot.

  I don't think another solution could be to stop the VM and copy the VMWare real files somewhere - would this work?

  The virtual machine is saved so as a last resort I can restore from a backup, but I would rather avoid this path if possible.

  Keep copy of all the files in this virtual machine a safe, desirable for you, but at the same time if you have the frame of this virtual machine already successful backup made so nothing to worry. Your virtual machine can be restored from that successful return. If you want to test the restoration, why not restore you this virtual computer on an isolated network and not little a test for your complete satisfaction before proceeding to deletion of snapshot.

  Note: Do not operate upgraded, this will put your VM around 2 years back State at the time of the creation of the snapshot.

• My OS has been updated from Windows 7 to Windows 10 without disabling the Adobe Acrobat 9 installed on the machine. Now I'm not able to activate the reinstalled Adobe Acrobat. When I try to record the serial number, it is not accepted and that she is trea

  My OS has been updated from Windows 7 to Windows 10 without disabling the Adobe Acrobat 9 installed on the machine. Now I'm not able to activate the reinstalled Adobe Acrobat. When I try to record the serial number, it is not accepted and is considered as invalid. Is it others to activate the serial No. ?

  Hello

  Please see error: "serial number is not valid for this product". Adobe Creative Suite and serial number incorrect error

  Alternatively, you can contact customer service

  Hope that helps!

  Kind regards

  Sheena

• My OS has been upgraded to Windows 7 at 10 without disabling the software Adobe Acrobat. I am currently not able to use the serial number. to validate the (Acrobat 9.0) software installed on the machine. How can I go on the validation of the software not

  My OS has been upgraded to Windows 7 at 10 without disabling the software Adobe Acrobat.

  I am currently not able to use the serial number. to validate the (Acrobat 9.0) software installed on the machine.

  How can I go on the validation of the software now?

  Try contacting the Adobe Support via chat and ask them to reset your activations - don't ask more than that or they are likerly tell you to look on the forums for help (where no one can help with reset).

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• My iMac crashed and will not trigger upward.  I bought a new IMack.  There is no way I can I disable the Deluxe Suite CS3 on the machine 'dead '.  My Apple notebook has been stolen and had the second CS3.  I just can't disable and reactivate the CS3 on th

  My iMac crashed and will not trigger upward.  I bought a new IMack.  There is no way I can I disable the Deluxe Suite CS3 on the machine 'dead '.  My Apple notebook has been stolen and had the second CS3.  I just can't disable and reactivate the CS3 on the new machine.

  If you see an anomaly of counting activation, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html and request an account reset activation.

• How to find the age of a child and snapshot number snapshot for a virtual machine.

  Hi all

  How to find the age of a snapshot for a virtual machine child count and snapshot.

  This code snippet should help... Assuming that you have the following entries:

  VM (VC:VirtualMachine)

  snapshot (VC:VirtualMachineSnapshot)

  System.log("====== Snapshot details for VM: "+snapshot.config.name+" ======");
  var snapshotTrees = vm.snapshot.rootSnapshotList;
  System.log("Snapshot Tree Count: "+snapshotTrees.length);
  for each (snapshotTree in snapshotTrees){
      showSnapshotInfo(snapshotTree, snapshot);
  }
  
  function showSnapshotInfo(snapshotTree, selectedSnapshot){
      if(selectedSnapshot == snapshotTree.snapshot){
          System.log("====================");
          System.log("Name: "+snapshotTree.name);
          System.log("Id: "+snapshotTree.id);
          System.log("Description: "+snapshotTree.description);
          System.log("createTime: "+snapshotTree.createTime);
          System.log("quiesced: "+snapshotTree.quiesced);
          System.log("replaySupported: "+snapshotTree.replaySupported);
          System.log("backupManifest: "+snapshotTree.backupManifest);
          System.log("snapshot id: "+snapshotTree.snapshot.id);
          System.log("state: "+snapshotTree.state.value);
          var childSnapshotList = snapshotTree.childSnapshotList;
          if(childSnapshotList != null){
              System.log("childSnapshotList length: "+snapshotTree.childSnapshotList.length);
          }
          System.log("");
      }
      if(snapshotTree.childSnapshotList != null){
          System.log("Children found: "+snapshotTree.childSnapshotList.length);
          for each (childSnapshotTree in snapshotTree.childSnapshotList){
              showSnapshotInfo(childSnapshotTree, selectedSnapshot);
          }
      }
  }
  

  During the passage of one of my virtual machines, here is an example of output I get:

  [2014-06-12 15:19:21.493] [I] Snapshot Tree Count: 1
  [2014-06-12 15:19:21.493] [I] ====================
  [2014-06-12 15:19:21.494] [I] Name: before upgrade to 5.0.1
  [2014-06-12 15:19:21.494] [I] Id: 31
  [2014-06-12 15:19:21.494] [I] Description:
  [2014-06-12 15:19:21.495] [I] createTime: Mon Mar 19 2012 13:48:57 GMT-0400 (EDT)
  [2014-06-12 15:19:21.495] [I] quiesced: false
  [2014-06-12 15:19:21.495] [I] replaySupported: null
  [2014-06-12 15:19:21.495] [I] backupManifest: null
  [2014-06-12 15:19:21.496] [I] snapshot id: snapshot-83
  [2014-06-12 15:19:21.496] [I] state: poweredOff
  [2014-06-12 15:19:21.496] [I] childSnapshotList length: 1
  [2014-06-12 15:19:21.496] [I]
  [2014-06-12 15:19:21.497] [I] ====================
  [2014-06-12 15:19:21.497] [I] Name: Before 5.1 upgrade
  [2014-06-12 15:19:21.497] [I] Id: 36
  [2014-06-12 15:19:21.497] [I] Description:
  [2014-06-12 15:19:21.498] [I] createTime: Fri Sep 21 2012 21:59:58 GMT-0400 (EDT)
  [2014-06-12 15:19:21.498] [I] quiesced: false
  [2014-06-12 15:19:21.498] [I] replaySupported: null
  [2014-06-12 15:19:21.498] [I] backupManifest: null
  [2014-06-12 15:19:21.499] [I] snapshot id: snapshot-84
  [2014-06-12 15:19:21.499] [I] state: poweredOff
  [2014-06-12 15:19:21.499] [I] childSnapshotList length: 1
  [2014-06-12 15:19:21.499] [I]
  [2014-06-12 15:19:21.500] [I] ====================
  [2014-06-12 15:19:21.500] [I] Name: Before Named Instance
  [2014-06-12 15:19:21.500] [I] Id: 37
  [2014-06-12 15:19:21.501] [I] Description:
  [2014-06-12 15:19:21.501] [I] createTime: Mon Nov 11 2013 13:40:46 GMT-0500 (EST)
  [2014-06-12 15:19:21.501] [I] quiesced: false
  [2014-06-12 15:19:21.501] [I] replaySupported: null
  [2014-06-12 15:19:21.502] [I] backupManifest: null
  [2014-06-12 15:19:21.502] [I] snapshot id: snapshot-236
  [2014-06-12 15:19:21.502] [I] state: poweredOff
  [2014-06-12 15:19:21.502] [I]
  

• Use of memory in the guest virtual machines

  Hello

  I don't have any background on VMware technology, but we are using a facility of dynamic cloud based on vCloud Director to the company where I work.

  The group that operates the server publishes the offer with a 'pay per use model"of service.

  This is true for the CPU resources, as we pay only what we use in the month. But in my opinion, it does not for the use of the RAM.

  We have Linux VMs that allocate a 4 GB of RAM 'physical' and our monthly bills show that the RAM usage is at 100% for all the month. But when you look at the tools of memory for the virtual machine, you can see that most of the time 50% or even less is used by the guest operating system process.

  This means from a user perspective the RAM price per month should be half of what we are responsible now. Ask operators on the 'question', we always get the answer that the use of the RAM is not dynamic and we need to pay for the use of 100% from the point of view of the server host.

  Could someone share some light on this subject? Is there really no way to make use of the dynamic RAM as the CPU usage?

  Thank you

  Michael

  Evening,

  As a service provider, I'll let you in on the secret:

  It depends on

  vCloud takes care of three models of default allocation.  Your provide may use other

  -Pay for what you use. -pay as you use

  -Allowance - you get resources, but can burst more

  -Booking - you get allocated resources and is

  Chargeback depends on model (in out of the box chargeback... your provider might have something custom)

  Pay as you use - charged on the basis of the resources used

  Allowance - remuneration based on allocation and additional for burst

  Allocate pay based on booking-

  There in the last two models really no way to load except full allowance (i.e. 100% cpu and RAM)

  Statement, I think you have something along the lines of the compensation you are using you mixed with a price system vendor.

  From my experience the resource more used in ESXi clusters in the RAM.  That's really what I buy in clusters of resource... I always need more RAM.  I need no more CPU. In addition, distribution of the CPU to vcloud is made via Ghz is not CPU.   RAM is allocated by GB.   So those set up and I think you suppliers is betting that they will always have to RAM so they charge based on usage not allocation.  While CPU, they have tons while they charge by usage.

  Really, it's just my thoughts... What can charge you on:

  -Ghz processor

  -GB of RAM

  -GB of storage

  How can recharge you:

  -Used

  -Allocated

  So bottom line... they can charge by opportunity they choose not too...

  It will be useful,

  J

• Not able to add the snapshot file to the virtual machine

  We have Win 2003 virtual machine running on ESXi 4.0.0 261974. The virtual machine has two vmdk files. We had taken the snapshot a few days back and today by mistake, we have removed one of the vmdk (DB - srv - 000001.vmdk - snapshot file). Now, we are not able to add the snapshot file to the virtual machine. When tried to add the existing vmdk, it displays only the source disk (DB - srv.vmdk). Please, help us to solve this problem.

  The GUI allows only adding the base vmdk. To add the Flash disk, you must manually change the vmx file. Registrations for the formerly removed virtual disk could still exist in the vmx file with... .present = "FALSE". After changing the vmx file you must reload the configuration. To do this, remove the VM of the inventory and add it back again (right-click on the vmx file).

  André

• snapshot of loading the new machine?

  I built a virtual linux machine and took a snap

  shot now I want to create multiple virtual machines and to apply this snapshot

  of them inorder to normalize the machines. How do I do that?

  Can I do this?

  Help, please

  Thank you

  RJ

  We will all live a virtual life...

  Hello

  Actually linked Clones ARE available for VMware ESX all types of guests. VMware View uses the clones related on ESX 3.x, then yes it is possible.

  You must use http://communities.vmware.com/docs/DOC-9020 to create your clones related on ESX 3.x

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]