Can I write data to the memory of the Machine (not SD card)?

Similar Questions

• How can you save data of the iCloud on an external hard drive?

  How can I record data of the iCloud on an external hard drive?

  Is not possible. iCloud requires a Wi - Fi connection to synchronize data. Cannot do it on an external drive.

• How to write data from the acquisition of data in NetCDF format?

  I connect to a set of data from the sensor through the DAQ assistant and want to write all data in NetCDF format. I have the required plugins installed, but still can not find how to do this.

  Or the labview can only read the netcdf files, but cannot write it! Please let me know if there is any other way out. I have looked everywhere but could not find something useful!

  Thank you

  Hey,.

  Sorry, the sheet in effect only allows to read NetCDF files, not writing to the NetCDF format.

  Kind regards

  -Natalia

• How do you use the freqout as the sample clock to write data on the of 6224 PCI

  Using PCI-6224, I try currently to export data using the freqout as a reference clock sample to a digital output channel. I plug the scope to see the clock on the freqout PIN. However, the data seem to be missing. How can I output the data correctly using the reference for timing? What am I missing that connects the two signals together? Any help would be greatly appreciated. I am writing this code in MS VS C++ and here's what I've done so far:

          int32       error=0;
          TaskHandle  taskHandle=0;
          TaskHandle  taskHandleFRQ=0;
          char        errBuff[2048]={'\0'};
      uInt8       data[8]={1,0,1,1,1,0,1,0};
  
      /*********************************************/
      // DAQmx Configure Clock
      /*********************************************/
      DAQmxErrChk (DAQmxCreateTask("",&taskHandleFRQ));
      DAQmxErrChk (DAQmxCreateCOPulseChanFreq(taskHandleFRQ,"Dev2/freqout","",DAQmx_Val_Hz/*Units*/,DAQmx_Val_Low/*IdleState*/,0/*Delay*/,10000/*Freq*/,0.5/*DutyCycle*/));
      DAQmxErrChk (DAQmxCfgImplicitTiming(taskHandleFRQ,DAQmx_Val_ContSamps,8));
  
      /*********************************************/
      // DAQmx Configure Digital Output
      /*********************************************/
      DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
      DAQmxErrChk (DAQmxCreateDOChan(taskHandle,"Dev2/port0/line0","",DAQmx_Val_ChanPerLine));
      DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"/Dev2/PFI14",10000,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,8));
  
      /*********************************************/
      // DAQmx Write Code
      /*********************************************/
      DAQmxErrChk (DAQmxWriteDigitalLines(taskHandle,8,0,10.0,DAQmx_Val_GroupByChannel,data,NULL,NULL));
  
      /*********************************************/
      // DAQmx Start Code
      /*********************************************/
      DAQmxErrChk (DAQmxStartTask(taskHandleFRQ));
      DAQmxErrChk (DAQmxStartTask(taskHandle));
  

  I think that the original code was operational. However, given that the data transmission has been set to finished, I had a hard time to visualize the data on my scope. By changing the value of DAQmx_Val_FiniteSamps to DAQmx_Val_ContSamps, I could easily see the data.

  My mistake. I'm still learning here. Thanks for the time.

• Windows 7. How can I see data on the Clipboard

  I get messages saying that there is a lot of data on the clip board and asking me if I want to keep it or not.  I have some information on the Clipboard that is important to me, but I do not see the data. All I get is the option either to keep information or throw it out...

  I looked through all the programs and use the search files but I can't find any reference to the Clipboard.  I like to keep the Clipboard as clear as possible, but I need to extract some data before deleting.

  I'd appreciate any help, I am 78 years old and not exactly a computer Whiz kid, unfortunately.  I bought a guide called "Windows for older people" - no where he mentioned Clipboard in the book

  Help please

  Pat King

  Hi Pat,

  The Clipboard stores not anything on the hard drive at all, there is no place of Clipboard, and it is not saved anywhere.  If you turn off your computer, or copy something else, the memory is replaced by the new memory.

• Write data to the Source folder

  I'm trying to change part of a script that I use for work he entered into the source of a file folder, run on rather than to a specific folder (in this case, the office).  Can someone help me understand how to change and/or by adding the code below?

  create the reference to the csv file

  var file = new file (Folder.desktop + "/ Data.csv");

  Open the csv file in Add mode

  leader. Open ("e", "TEXT", "?");

  jump to the operating system in use on the line set

  ($.os.search(/windows/i)! = -1 ? file.lineFeed = 'windows': file.lineFeed = "macintosh";

  at the end of the file

  leader. Seek (0.2)

  write all the information required for the csv file

  Name of the document, Date1, database2, donnees3, etc.

  file.writeln (decodeURI (activeDocument.Name) + ","Data1","Data2","data3"," + data4. ") ToString()', '+ Data5.toString ());

  Close the csv file

  leader. Close();

  Now, I'm assuming that the part to change here is Folder.Desktop.  And I think I will need to change this option to be Folder.getFolderName.  getFolderName is a variable used in other code that checks the source directory of the current file.  This code of source directory, it's what I do not know how.  The script itself would have to do the check whenever it is running as I want him to be able to work with included subfolder of batch runs, make a new file in the subfolder when working with these files.  Anyone has any ideas, how to proceed?  Any help is very appreciated!

  dgolberg

  Edit: I forgot to mention; It would be nice if it can also store the name of the folder in which the source file is in a variable, so it can be written to the file as .csv.  This is not as important as the code mentioned above, but it would be helpful none-the-less, if possible.

  No problem, I was able to solve it on my own all the time.  I thought it would be much harder than it actually was. but has been able to do by simply changing

  var foldLoc = new File ("C:\\Temp\\");

  var file = new file (foldLoc + "/ Data.csv");

  TO

  var foldLoc = app.activeDocument.path;

  var file = new file (foldLoc + "/ Data.csv");

  and now, it records the data and the .csv file in the same folder as the currently open project.  Thanks for trying to help; It is much appreciated.

  dgolberg

• Can I limit data in the cells to a single app?

  I am considering upgrading my phone to Rabat for an iPhone. I use iOS on my iPad for several years, but have never had a smartphone before. My iPads are Wi - Fi only so I never had to worry about the limits, and since I do not anticipate needs a lot of data I expect to get a plan with a small data limit.

  I know I can say iOS does not allow the use of mobile data and only to access data via the Wi - Fi so that he does not eat my data when I don't want it.

  My question is this:

  I can say for a specific application access cellular data while blocking all other applications to do? For example, maybe I want to use an app for navigation while driving. It requires cell data for the navigation service knows where I am and you can send me instructions and alerts. But I don't want all the other apps on my phone goes on line and using data while I am using the cellular connection rather than a Wi - Fi connection.

  No matter which iPhone I get would have iOS 9.3 on it. Probably the SE of the iPhone, but I'll look older before making a final decision.

  Thank you.

  Yes - cell data can be disabled for individual applications. So you can disable it for the applications that you want to restrict and let it on-site for those who have not. I hope you enjoy your new phone

• How can I recover data when the firewire and USB ports do not work?

  My MacBook Pro has been flooded by water, and no ports work. Anyone know how I can get information on the new system or hard drive and my computer?   The cost of repairs to the machine is $ 800, so I'm going to buy a new.

  Remove the hard drive in an external enclosure supporting USB or Firewire. Connect to another computer to retrieve your data. This requires that the player was not damaged.

• write data to the cell in excel

  Hello

  I am trying to write data to a cell in excel. When I'm looking in sample program, I felt a bit difficult to understand.

  I have written code to read data from a particular cell that works well. I am facing difficulties in writing data in the cell. pls help someone.

  to read a data cell that works

  status is Excel_RangeGetItem (rangeHandle, NULL, CA_VariantInt (i + 1), CA_VariantInt (j + 1), & MyVariant);.
           
  Get the pointer of SHIPPING
  status = CA_VariantGetDispatch (& MyVariant, & MyDispatch);
             
  Create a Range object pointer for SHIPPING
  status = CA_CreateObjHandleFromIDispatch (MyDispatch, 0, & ExcelSingleCellRangeHandle);
             
  Get the value of the range of simple cells
  status = Excel_GetProperty (ExcelSingleCellRangeHandle, NULL, Excel_RangeValue2, CAVT_VARIANT, & MyVariant);
            
  status = CA_VariantGetCString (& MyVariant, &val);)
  strcpy (CellValue, Val);

  to write data in a cell

  status is Excel_RangeSetItem (rangeHandle, NULL, CA_VariantInt (i + 1), CA_VariantInt (j + 1), MyVariant);.
           
  status = CA_VariantSetDispatch (& MyVariant, & MyDispatch);
             
  status = CA_CreateObjHandleFromIDispatch (MyDispatch, 0, & ExcelSingleCellRangeHandle);
     
  status = Excel_SetProperty (ExcelSingleCellRangeHandle, NULL, Excel_RangeValue2, CAVT_VARIANT, & MyVariant);
           
  status = CA_VariantSetCString (& MyVariant, writedata);

  I know I made a mistake in the code above.

  Thank you very much, Roberto. You have solved my problem.

• How to write data to the XML in VBA 6

  Hello

  I am using vba 6

  I have different data like strings, integer etc I get the object group tag.

  I want to write data of XML on the button click.

  and save this file on the way to my pc.

  Bad forums. Message here:

  MSDN - MSDN forums - Microsoft

• I can't write anything on the areas that fall within any web page

  When I opened a new web page, sometimes I have an annoying error when I try to write anything.
  The problem is solved by placing the mouse pointer over the area of the main search and to return to the same point.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• two digital to write data to the power file triggers

  Hello

  I am currently building a VI to use two digital front as triggers posted the pic to start and stop writing data to the file.

  When start trigger is activated, the data is written to the file, it goes indefinitely until the stop trigger is on.

  If someone give me some advice, they will be appreciated.

  Hi Jetfire,

  you know the difference between BMP and JPG?

  Size! (And this is the reason why BMP is not allowed in this forum.)

  Just you rename a file does not change the dataformat. Please attach real JPGs (or better yet the PNGs) next time!

  Jetfire created a related thread, now with a VI instead of an image...

• How to write data at the end of the doc in sense the other way around? [CS6 - jsx]

  I need to move all the entries in my texts spec at He end of the doc. To keep the correct reference overall found entries that I have to deal with in reverse order

  for (i = mFound.length - 1; i > = 0; i--) {}

  .. .etc

  but to invent, how to place entries cannot write off at the end.

  String:

  mStory.insertionPoints.item(-1).select ();

  App.Paste ();

  does not work properly (of course). It does this:

  10.

  9.

  8.

  7.

  6.

  .. .etc

  How to get

  1.

  2.

  3.

  4.

  .. .etc

  ?

  Dmitry,

  Well, I've been basically dealing with moving the notes at the end of the story in the correct order. Anyway, concerning the figures by exposing, there no need to choose things and remove these selections. She considered more safe, like Vamitul too mentioned, to work on the objects. To manage numbers superscript, I would do this:

  app.findGrepPreferences = null;
  // Search just the note contents: lookaround leaves the braces in the text
  app.findGrepPreferences.findWhat = /(?<=\{\{\{).+?(?=\}\}\})/.source;
  found = app.documents[0].findGrep();
  
  for (i = 0; i < found.length; i++){
      found[i].parentStory.insertionPoints[-1].contents = '\r' + String (i+1) + '.\u2003';
      found[i].move (LocationOptions.after, found[i].parentStory.insertionPoints[-1]);
  }
  
  // Now search {{{}}}
  app.findGrepPreferences.findWhat = /\{\{\{\}\}\}/.source;
  found = app.documents[0].findGrep();
  for (i = found.length-1; i >= 0; i--){
      found[i].contents = String (i+1);
      found[i].position = Position.SUPERSCRIPT;
  }
  

  Then first move the notes at the end of the story, leaving behind all the triples of braces. Then, after you have moved the notes, do you a new search on the sextets of braces. Only select and delete, just redefine the content of what you have found and apply an in shape.

  Peter

• Send XML data for the processing of credit cards

  I'm implementing the presentation of an XML document in my Web site for the processing of credit cards using the API from my dealer.
  
  This is the format that I use for my application. For some reason, I get an error message saying "invalid request Format. XML request is not correct or the application is incomplete. »
  
  I know that the XML itself is correct, as I submit directly through the URL string in the browser and it works OK.
  
  Here's what I do:
  
  < cfsavecontent variable = 'strXML' >
  
  <!-NOTE: test data below - not my actual data-->
  < txn >
  < > 123456 ssl_merchant_ID < / ssl_merchant_ID >
  < > 123456 ssl_user_id < / ssl_user_id >
  < ssl_pin > V6NJ3A < / ssl_pin >
  < ssl_transaction_type > ccsale < / ssl_transaction_type >
  < ssl_card_number > 1111111111111111 < / ssl_card_number >
  < ssl_exp_date > 1210 < / ssl_exp_date >
  < ssl_amount > 2.34 < / ssl_amount >
  < ssl_salestax > 0.00 < / ssl_salestax >
  < ssl_cvv2cvc2_indicator > 1 < / ssl_cvv2cvc2_indicator >
  < ssl_cvv2cvc2 > 321 < / ssl_cvv2cvc2 >
  < 1234 > ssl_invoice_number < / ssl_invoice_number >
  < ssl_customer_code > 1111 < / ssl_customer_code >
  client < ssl_first_name > < / ssl_first_name >
  name of < ssl_last_name > < / ssl_last_name >
  < ssl_avs_address > 1234 main st. < / ssl_avs_address >
  the apt b < ssl_address2 > < / ssl_address2 >
  < ssl_city > any city < / ssl_city >
  < ssl_state > ST < / ssl_state >
  < ssl_avs_zip > 55555 < / ssl_avs_zip >
  < ssl_phone > 555-555-5555 < / ssl_phone >
  < ssl_email > [email protected] < / ssl_email >
  < / txn >
  
  < / cfsavecontent >
  
  < cfhttp url = "https://www.myvirtualmerchant.com/VirtualMerchant/processxml.do?xmldata=" method = "post" >
  < cfhttpparam type = "XML" value = "trim (strXML)" >
  < / cfhttp >
  
  < cfoutput > #cfhttp. FileContent # < / cfoutput >
  
  
  
  Can someone tell me what I am doing wrong?
  
  (The developer's guide is available here):
  
  https://www.myvirtualmerchant.com/VirtualMerchant/download/developerGuide.PDF)
  
  Thank you!

  Seek to deepen your original message.

  You're saying this...
  "I know that the XML itself is correct, I can submit directly through
  the URL string in the browser and it works well. »

  Who said to me that you are using URL get parameters not post form
  parameters. Also you do not have the name of the url parameter in the url
  string, unless you put the value one. If you use the
  Tag, it must contain the name. Finally you seem
  Miss the sharps.

  Give this or something like this a try.

  <>
  URL = "https://www.myvirtualmerchant.com/VirtualMerchant/processxml.do".
  method = "get" >
  
  

• Can I renovate Vista on the machine to win 8?

  My new laptop runs Windows 8, and I would like the option to slot Vista instead. I understand that I can create a new partition and install Vista on it, but that Win8 will then not work until I have reinstall. The recovery disk I can create in Win8 will reinstall it when Win8 does not work?

  It should work, but the problem you see even Vista drivers available for this purpose? That could be a big problem and make use of Vista on the terrible machine. It would be best to run Vista Windows 8 on top with a program like Oracle VirtualBox virtual machine.

  Search in the following text:

  http://www.PAGESTART.com/win8dbwin701181301.html

  References to Windows 7, but the same principles should work too for Vista.