disable the computer crashed

Similar Questions

• Hard drive being highly accessible all few seconds, although it is, the computer crashes

  Since about 3 days (or at least that is the oldest I noticed it, but he couldn't have done it much earlier) my computer was freezing for 3-4 seconds, while the hard drive turns on solid. This occurs regardless of whether the computer is nothing or not constantly every few seconds. I went around the internet looking for ideas, but nothing I tried to (disable superfetch, windows search, start in safe mode, update drivers, looking for the raid drivers, disarm avg, defragmentation and simply drop each program without importance, I can get away with) had no effect.

  The computer is an Alienware M15x, I got less than two months ago (totally awesome Christmas gift). It has Windows 7 Home Edition premium on it, a hard disk of 500 GB that says all diagnostics works very good and 6 GB of ram, I had AVG Antivirus on it too (until I took it in the attempt to solve this problem), and the protection of the system (the backups and whatnot) was already disabled. I also did a restore system before it started doing this, but which did not help either.

  The only problem it says that appears when I generate a health report to the system that is the disk queue length average 2-3 and going as high as 30. I can sit and watch points every 2-3 seconds since the resource monitor, which coincides with the HDD light will the computer crashes. It does even in safe mode, and it made all the games freeze market too.

  I'm completely at the end of my tether here and nothing I tried worked, is there something I'm missing here?

  Absolutely nothing worked, I'll try to reinstall windows, and if that does not do, Alienware will repair this one way or another. Thanks for the suggestions so.

  (edit a few hours later)

  I reinstalled, and it always does, so the hard drive needs to be spoiled. guess I must return.

• disable the computer voice

  How to disable the computer to talk to while you us it

  Hello

  Check if windows Narrator is turned on and if it is, turn it off - see the video below.

• try to uninstall service pack 3, but the computer crashes

  Service Pack 3/Pagemaker problems

  I am running Windows XP Home Edition. None of the Adobe CS2 programs allow me to open the old Pagemaker files.  It gives the error message: file is damaged.  According to my research, the problem with Service Pack 3.  The research also tells me that the solution is the removal of the service pack.

  When I try to remove Service Pack 3, the computer crashes.  Are there other solutions?

  Problem is not with the help of CS2 in itself - it works fine...  Apart from the fact that none of the CS2 programs will allow me to open Pagemaker 7 or old Pagemaker files.

  Who should have nothing to do with the level of service pack for XP!

  Yet once, if there is a problem, uninstall and reinstall CS2. But as you know, CS2 is quite old and is no longer supported. If this feature is important to you, I guess using the current version would be the way to go.

• Blue screen after the computer crashes

  original title: BSOD: Blue Screen Of Death

  My PC has run completely fine until here that is 2 years from the date of purchase. But now these BSOD concern me. The computer crashes, the graphics have become distorted [I am unable to read anything] and then GRASS comes... I can't read because it is very blurry... Please help me... I can't read the minidump files ' coz I don't know how we debug tools. Please help me!

  Hello

  The first couple of line indicates a problem with your Nvidia video drivers, so that would be the starting point. Download and install a fresh game, update for your system here:http://www.nvidia.com/Download/index.aspx?lang=en-us

  Uninstall the current set through the configuration/programs and features Control Panel, then reboot and install the new set. Do not install only the new on the 'old'.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• the computer crashes (off) whenever I try to sync to iPad via iTunes

  the computer crashes (off) whenever I try to sync photos with iPad via iTunes.  Synchronization of fine music.  I uninstalled and reinstalled all apple applications and have the latest version I have iTunes.

  See the following article: http://www.apple.com/support/itunes/ and the links it contains.

  If this does not help, contact Apple tedhnical support to the: http://www.apple.com/contact/.

  They should be able to help you with your problems.  They are their products, and the problem seems to be with them and not with Vista.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The computer crashes; slow to start; Not relevant

  It's all thanks to IT.

  Hello

  You will have to provide much more information to help. Some questions are:

  (1) what you were doing when the computer crashed? What programs have been opened? Running?

  (2) you online were at the time? Had recently downloaded anything? You have applications antivirus and anti-malware on your computer? Have you run analyses with these programs? If so, what was done and what show?

  (3) what do you mean exactly by "inadmissible"? You can do something, or is it just sit there doing nothing? When you say 'slow start', which is just an impression or you timed? If you have timed the start, what are the gaps of time?

  (4) depth OS and little do you have? How much RAM do you have? What and how many programs you load at startup?

  This is the starting point to determine what might happen. There may be more questions that need to ask, but until you have answered these questions, there is little I can do to help you.

• Vista will not register, the computer crashes with log off

  Computer crashes with log off of Vista.

  Hello

  Check your antivirus program to see if it is set to check the floppy drives, CD/DVD, or other removable media drives
  on closed session, restart, or stop. Those who do this will be often blocks that you met.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Wireless adapter fails - then the computer crashes.

  I've had this problem for a few days now. Basically, the problem is that my computer freezes completely and it becomes unresponsive at random times. It happened while I watch videos, play games or surf the internet, even while I'm on the login screen.

  I have recently noticed that just before the accident, strange things happen that seem to be centered around the wireless adapter. I'm not going to load a Web page, so I'll check the icon wireless and see that I'm connected to the network, but not internet. And then, as I try to disable and re-enable the adapter, the computer will crash.

  I just downloaded the drivers from the adapter and install them, but that has not changed anything.

  Anyone know what could cause this weird problem?

  Thank you.

  PS:

  Just happened twice again. Failed loading of Web pages, and who warned me that something was up. I unplugged the adapter, the operation aboard as usual for a while, but the computer does not save the adapter has been unplugged and continued to try to load web pages for a few moments, before it crashes.

  The first time, he had a BSOD, but he flashed to the top for a while before the computer restarted itself.

  Adapter is TL-WN722N

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.
  
  There could be various reasons for gel as a third-party program, modules, the origin of the problem of the computer.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Note: 1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  (2) If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• The computer crashes: something to do with the minidump and sysdata.xml?

  My computer broke down twice now and restart an error message pops up saying "your computer has recovered from a serious error". It is said that two files in the error report will be sent to microsoft. the first complete mini103106 - 01.dmp and the second sysdata.xml

  I could find these files and delete them but have no idea if this would solve the problem and do not want to do the wrong thing...

  Hello

  Not easy to say why this is happening, but for me it s definitely something wrong with the software.
  Well, in this case we can only speculate. You know, it s Microsoft Windows and sometimes things happens without any reason :(

  I have heard from probably the system restore function could be corrupted and no have deleted the folder with the minidump and disabled the system restore feature in the control panel-> system.

  But in my opinion, the system restore function is important and necessary if you want to restore the operating system to the beginning.
  That's why I put t recommend disabling this feature.

• Cannot install error message game "name of the program is not responding" then the computer crashes (vista 32 bit) HP model a6220a

  I'm unable to install SETTLERS II 10TH ANNIVERSARY op system 2000/XP (XP recommended) processor 1.4 Ghz (I have 1.6 Ghz) memory 1 Gb (which I have). I get so far as to accept terms and conditions click 'accept' and then click 'next' and I get the message "The Settlers II is not responding" and then the window hangs and I have to stop to get rid of. I have other games that the State on the box, they are compatible, but the same thing happens with them also. Before that all happened, I installed successfully, played and then uninstalled the game Settlers II oringinal.

  Hi dandylion,.

  Thank you for using the Microsoft Answers forums.

  Run utility windows install cleanup in your computer and then try to install these games.

  Download the Windows install cleanup by visiting the link below.

  http://support.Microsoft.com/default.aspx/kb/290301

  If the problem still persists then try to install in clean boot mode.

  To enter a mode of clean boot on your computer, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, try to install these games.

  http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• the computer crashes when video Skype calling

  OK, so during a video call, the other night, my laptop Averatec running Windows XP home overheated and shut down, I restarted, since then when I go to the video conference on Skype, my computer crashes, restarts and gives me several different answers, for example a blue error screen, malware, software spies ect in conflict.

  Since this place has started, I took the following steps and not to find another solution.

  • check disk
  • updated Sytem
  • Update driver
  • Update directX
  • Uninstall / reinstall Skype
  • installation of mcafee
  • Disk Cleanup
  • removal of unwanted emissions

  I can't understand what other solution to use

  Other that the timelysupportof the right answer, you could do things * methodically * and in the following order:

  1. Uninstall Skype.
  2. Update your web maison.* of manufacturers motherboard chipset driver
  3. Update your audio device driver, since manufacturers web maison.*
  4. Update your video device since the manufacturers driver web maison.*
  5. Update your network from the Web pages of manufacturer (s) device driver. *
  6. Reboot and install CCleaner.  Run and cleaning of loose files it finds.
  7. Download and install MalwareBytes and SuperAntiSpyware (FREE for BOTH) and run scans of complete system with each of them (one at a time) and remove all found each of them.
  8. Open the registry and find the Skype entries and remove them.  Everything you find.  HKLM and HKCU areas in particular.
  9. Reboot again.
  10. Run a CHKDSK on all readers
  11. Perform a defrag on all readers
  12. Reboot again.
  13. Visit http://winodwsupdate.microsoft.com/ and install all the updates that are not optional (optional and hardware software optional can be ignored) and who do not update anything you don't want to update (such as Internet Explorer, etc.)
  14. Restart and repeat 13-14 until you have updated not more not optional, you need to install.  Reboot once more for good measure.
  15. Download the latest version of Skype and install it. Reboot before running it.

  * If possible, go the real manufacturer - not the whole machine - but the device.  For example, if you have an Intel chipset based motherboard, download the drivers for it to Intel.  If you have a video device nVidia, download the drivers for it from nVidia.  If you have a Broadcom network device, download the drivers for it from Broadcom.  If you have a RealTek audio device, download the drivers for it from RealTek.  And so on...

  If, after doing all this in this order, it still does not - it is probably a hardware problem or a Skype number.  However, you might try ONE last thing.  SFC/scannow.  You will need your Windows XP CD-ROM.

  After that - you are really left with material/Skype or something messed up so you might resign yourself to try a full installation of fresh erase (although I wouldn't do if I couldn't have my disk image and send it to where it was before I tried.)

• the computer crashed, I need to reinstall my operating system software

  My computer crashed. How can I get a copy of my operating system from Vista to reinstall? I bought a mac and parallels software, and I need to install my software Vista be able to use it (it has been preloaded on my pc crashed).

  Hello

  Here are the different ways to reinstall Vista on your computer "crashed".

  If you want to install anywhere else, like her, is a preinstalled OS, it is linked to the original computer "crashed" it came installed on.

  An OEM license is not transferable

  And install on a Virtual Machine requires a new license.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• After you have installed the computer crashes security update.

  Original title: security update blocks the computer

  Tuesday, July 10, Microsoft has pushed through an update to the security features.  I have installed McAfee and Windows Defender is disabled.  Since the works of modernization, the keyboard and the mouse will freeze after a variable period of inactivity sometimes as short as 2 hours or as long as 12 hours.  The computer must be turned off at the switch and restarted.  The restart is problematic and often takes several attempts.  The last series of attempts took more than 90 minutes; so this question.  Sometimes on restart says explore "Cable is not connected to the"connecting to LAN"network adapter", but we all know that it is.  Random reboots solved this problem.  The operating system is Windows Vista Home Premium.  I am at a loss.  Disable for everything to run as it did before July 10 to date?

  Hello

  If you have McAfee installed on your computer, the time protection real Windows Defender will automatically close as McAfee already brings you this service.

  Method 1:

  Step 1: Check in safe mode.

   

   

  You can also check if the problem persists in safe mode.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Now step 2.

  Step 2: Perform the clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

   

  Perform the system restore.

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 3:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check the updates are installed?

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Check the event viewer for the detailed error message.

  http://msdn.Microsoft.com/en-us/library/aa189531 (v = office. 10) .aspx

  http://TechNet.Microsoft.com/en-us/library/aa997769 (v = exchg.65) .aspx

  Hope the above information is helpful.

• When I start the system upward, it goes to my logon screen and the computer crashes

  I have a windows vista computer and when I start the SUST until it goes to my login screen, I connect the Welcome screen comes the computer hangs... I do a control-Alt - Delete that returns the desk top

  When you get on the desktop, open the start menu to search msconfig and press ENTER.

  When the popup window appears, it should start under the general tab, and you should see normal startup. For now, set it to start diagnosis, press ok and restart the computer. If it still crashes, then replace the and set it back to normal startup, as something else is causing this problem.

  If she does not hang, and then back up the, set back to normal and this time go to the Startup tab. The list is all the things that are set to start when you start your computer. One of them is causing the computer to crash.

  If you have an idea that it might be that you can deselect it, apply, then reboot and see if it still crashes. Or you could just go in the list, one at the same time turn them off then restart suspended far, so you know which is the cause.