Disable the database on abandonment

Similar Questions

• How to disable the database 64 MB of memory on Satellite Pro 4270?

  Hello!

  On my own SP4270 Win2000Pro install case that I came to the conclusion that the problem reside on the base 64 MB of memory on the motherboard, which had deserted somehow 1.1 MB, and so more big programs will not load and the installation procedure for Windows, as well as the entire machine will be completely stuck in about 5 to 10 seconds or at a very early stage in the process.

  But, I would like to have this made installation and in order somehow. Maybe the way is to disable the base memory and then just go with the sticks of memory on the upgrade of two memory locations.

  But, how to disable? Is the only way to throw the motherboard in the trash, or is there another way more decent to handle this, the BIOS v2.70 give any options at all for this...

  Best regards

  Pete v.

  Hello

  I'm scared of m it s not possible to remove the internal memory.
  It s part of the motherboard and if this memory malfunctioned the entire Board must be replaced or repaired.
  Unfortunately, you will contact a technician for repair, or you search for second hand motherboard.
  I prefer the second way, many people offers notebooks of second hand with grand jury

• Check if the automatic start of the database is enabled or not?

  Grid Infra RDBMS/Version: 11.2.0.4
  Platform: Oracle Linux 6.3

  Disable us automatic restart with the CRS database by using the following command.

  $ srvctl disable the database < name of comics > d

  How can I check if the auto restart DB is enabled or disabled?

  Add the - a switch to the command of srvctl config database. (of 11.2.0.3 GI + RDBMS):

  [oracle@s600986sc0sl01 ~] $ srvctl disable the d SC01000 database

  [oracle@s600986sc0sl01 ~] $ srvctl config database-d SC01000 - a

  Unique name of database: SC01000

  Name of the database: SC01000

  ...

  Database is disabled

  Database is managed administrator

  [oracle@s600986sc0sl01 ~] $ srvctl activate database d SC01000

  [oracle@s600986sc0sl01 ~] $ srvctl config database-d SC01000 - a

  ...

  Database is enabled

  Database is managed administrator

• Synchronize with the database, the button is disabled?

  Hello

  Studio Version 11.1.2.3.0 Edition and Studio Edition Version 11.1.2.4.0

  For me and my colleague, the button synchronize with the database are disabled. Any ideas?

  

  Kind regards

  Pamela

  It seems that it is a known issue with JDev R2:

  Synchronize with database is disabled

  For a possible solution, take a look at:

  Cannot "sync my entity objects with the database"

• Disable the Oracle 12 c EM Express database

  It seems less obvious now this console db (express database) is stored in the database how to disable.  Already, we have EM 12 c Cloud, it is interesting to have the Express database also run standalone?  If not, is it possible to disable completely recommended?

  If you have control of cloud 12 c, I don't see any value to this express EM. I do not use it. Cloud control has many more features than that.

  You want to only use this option if you are using standard edition and cannot use the control of cloud 12 c.

• Disabling the open database while flashback?

  On Oracle 10.2.0.4
  
  
  I know that to mount the database before enabling the return of flame. You can disable flashback record while the database is open? Or should it be closed?
  
  We encounter performance problems related to flashback buf free by RVWR and want to do without any impact on customers
  
  Thank you very much

  The Pat wrote:
  On Oracle 10.2.0.4

  I know that to mount the database before enabling the return of flame. You can disable flashback record while the database is open? Or should it be closed?

  We encounter performance problems related to flashback buf free by RVWR and want to do without any impact on customers

  Thank you very much

  Yes CAN.

  SQL > shutdown immediate
  The database is closed.
  The database is dismounted.
  ORACLE instance stops.
  SQL > startup mount
  ORACLE instance started.

  Total System Global Area 535662592 bytes
  Bytes of size 1375792 fixed
  331350480 variable size bytes
  197132288 of database buffers bytes
  Redo buffers 5804032 bytes
  Mounted database.
  SQL > alter flashback database;

  Database altered.

  SQL > alter database open;

  Database altered.

  SQL > select flashback_on from database v$.

  FLASHBACK_ON
  ------------------
  YES

  SQL > alter flashback database;

  Database altered.

  SQL > select flashback_on from database v$.

  FLASHBACK_ON
  ------------------
  NO.

  SQL >

• Temporarily disable sending on the eve of the database of newspapers

  All,
  
  I have 3 node RAC primary database and RAC 3 node backup database.
  Oracle version is 10.2.0.4.0 on Sun Solaris.
  We use pending through LGWR log shipping, database and auto is in maximum performance mode.
  
  We plan to run critical processes of a lot which is strongly oriented as CPU consumption of resources and memory consumption. It runs for 10 hours with set of stored procedures.
  
  To provide resources to this process of batch processing, front-end applications will be stop (completely time to users).
  
  Question 1_
  
  It is recommended to stop log shipping on the eve of the database during batch processing. Once the batch is finished, activate standby mode.
  
  I'm new to this environment before. I went through the documentation and I've identified the steps below to perform the above task.
  
  "" 1) before the batch, run the following command in primary education - alter system set log_archive_dest_state_2 = reporter scope = the two sid = ' * '; This will temporarily stop log shipping on the eve of the database.
  (2) run the lots for 10 hours. Depending on the size of FRA available are the rates of production of the journal, we have enough space to resist the newspapers for 3 days.
  "" (3) when the batch is finished, I will exercise the command at primary level - below alter system set log_archive_dest_state_2 = enable scope = both sid = ' * ';
  
  After step 3, I guess that all arrears of logs in the meantime to primaries will be transferred automatically at startup of the database and applied.
  
  My above assumption is correct and did, I missed milestones.
  
  Question 2_
  
  Before the batch, we'll take hot full backup with RMAN.
  If something goes wrong with a batch, we plan to restore and reset the logs. Here, no recovery is necessary. This approach is very good. any other better solution.
  
  My questions can be very basic, since I don't have custody of data set up in sleep mode, I'm not able to test it. I need your help when reviewing above steps and suggestions / corrections.

  Hey Buddy,

  Question 1

  It is recommended to stop log shipping on the eve of the database during batch processing. Once the batch > process is finished, activate it in standby mode.

  I'm new to this environment before. I went through the documentation and I've identified the steps below to perform the above task.

  "" 1) before the batch, run the following command in primary education - alter system set log_archive_dest_state_2 = reporter > scope = the two sid = ' * '; This will temporarily stop log shipping on the eve of the database.
  (2) run the lots for 10 hours. Depending on the size of FRA available are the rates of production of the journal, we have enough space > to withstand the newspapers for 3 days.
  "" (3) when the batch is finished, I will exercise the command at primary level - below alter system set log_archive_dest_state_2 = enable scope = both sid = ' * ';

  After step 3, I guess that all arrears of logs in the meantime to primaries will be transferred automatically at startup of the database and applied.

  My above assumption is correct and did, I missed milestones.

  I guess it's safer if you also include a step 1.1, which continues the redo apply processes. "alter database recover managed standby database cancel;

  If all archive logs are on the primary server, as soon as you raise the environment (activate the log_archive_dest and start posting), your stand will ask for the records it needs.

  After a long period without applying redo, you also have the option to use a backup incremental rman to 'transfer' the day before [RMAN incremental backup to roll forward using a Physical Standby Database | http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/scenarios.htm#CIHIAADC]

  Question 2

  Before the batch, we'll take hot full backup with RMAN.
  If something goes wrong with a batch, we plan to restore and reset the logs. Here, no recovery is necessary. > This approach very well. any other better solution.

  My questions can be very basic, since I don't have custody of data set up in sleep mode, I'm not able to test it. I need your help when reviewing above steps and suggestions / corrections.

  If I were you, in the event of an error, I'd just use database flashback instead of open primary with resetlogs. Have a look here [Using Flashback Database after the issuance of a statement Open of Resetlogs | http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/scenarios.htm#i1049616] to get an idea about this process and also read notes metalink 728374.1 and 824213.1.

  It will be useful,
  Cerreia

• How can I DISABLE the module "signature" when I want TO use an older add-on?

  I the MAGNIFICENT Add on 1 - ClickWeather and now has a message on the 'signature' module Now... I DON'T want to use a product of INFERIOR quality such as suggested in the name of the add - on.

  I would use the add-on that I already have on my Firefox, 1-ClickWeather. So, how can I disable the 'signature' on an individual add-on module? It is said to "Act with caution", but it does not show Me the details of my time. I reinstalled the add-on, but it does not yet record my position.

  Yes, I KNOW it is no longer supported, but has always worked until this past Saturday. It was abandoned several years ago but was kept alive by a single poster whose comments have disappeared. I have the add-on on my computer. I continued to update the continuous Firefox updates. Now, I want to again but there's this ridiculous thing on the module "signature" and «proceed with caution...» »

  You cannot delete the warning, but in 42 Firefox extension should always work.

  See:

  • https://wiki.Mozilla.org/addons/Extension_Signing
  • https://blog.Mozilla.org/addons/2015/02/10/extension-signing-safer-experience/

   Firefox 40-42: Firefox warns about signatures but doesn't enforce them.

• Can I temporarily disable the password saving and then reactivate without losing my passwords?

  Currently, I am producing a video screenshot to ask my users on how to complete the automated process of 'forgot password'.
  I want to just disable the password save dialogues while I save the screenshot.

  However, I don't want to lose all my passwords/connections in the process!

  Many thanks and best wishes,

  Lachy

  Another idea is to create a separate profile to Firefox for demos. It's a separate Firefox settings folder that is saved along with your main profile.

  A new profile will be your plugins installed by system (for example, Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions or other customizations. It should also have databases of completely fresh settings and cool a cache folder.

  If you want to try it:

  Out of Firefox and start in the profile using Start Manager > Search box (or run):

  firefox.exe -P
  

  Do not delete anything here!

  Any time want to switch profiles, exit Firefox and return to this dialog box.

  Click on the button to create a profile, assign a name like Clean2015 and ignore the ability to move the profile folder. After you create the profile, select it and start Firefox in this profile.

  One of the advantages is that none of your history shows in this profile.

  When you return to the Profile Manager, you might be tempted to use the button to delete the profile. It's a little too easy to accidentally delete your 'real' profile, so I recommend you to resist the temptation. If you don't want to clean up later, I suggest to make a backup of all your profiles first in case something go wrong.

• G60: Turn on the password, system to disable the code: 57770150. Attempt to restore. Have the disks.

  It is an old laptop that I bought new week Windows 7 is out, but it is preloaded with Vista.  I got a product key for Windows 7 update but no real drive and did not recovery disc at the beginning.

  2011. I had issues and called for what I thought was supported from Microsoft Tech (a number provided by Office Depot employee) and paid for support and allowed them access remotely.

  Disreputable company or a person got deep into my system, networking, tried to steal files and installing keylogging and silent channel Skype file bombs and who knows what.  I got the files, file-by-file and moved to external drives, tried many times have this machine wiped and restored.  I have never trusted and ended upward abandonment and to buy a macbook air.  So my HP laptop is currently loaded with Microsoft 7 ultimate with a legitimate key from a school who worked on this subject, but I do not know if the restore was successful since it was never taken away from the factory with Vista settings, first.  I just gave up and set it aside.

  On the fast track. A few months ago I decided that I wanted to use this machine again because it has a bigger screen for photo editing and may contain pictures, freeing up space on my macbook air flowing.  However, even with my tip, I could not remember my old password journal.  I finally found a way to bypass my password login, but in the process of game one power new password.  I didn't try anything fancy and can not remember how or why I did it, even.  I was sure it was just my name or a generic name like "admin" or "password"... so I was happy I got, but still had reservations so I did some updates and ordered the Vista restore disks and set it aside again.

  Argh.  So now I was ready to move some files from my mac and was almost convinced myself just to use the disks of Vista to default and I DON'T remember the power on password... (I am sure that I would have written this down in the notes on my iphone... but unfortunately, I dropped on concrete a week or two ago and cannot access my notes!)

  After a few attempts, I get code: disable the system - 57770150.

  It's a bit like Moby * beep * now.  I have no cash or motivation to buy another laptop.  I really want to get THIS phone, which was basically stolen from me to solve some problems at the moment (free space on my mac).

  A I completely screw this up after all this?  I've read about taking batteries or pins... never tried it before, but I'm not afraid to take risks because I've already lost everything I could lose on that.

  Is there a way to restore discs if I can't power up password screen?

  Any help would be greatly appreciated.  I realize account this message is long, but it's a complicated scenario and I thought that the history of malware, remote access, set at level vista/windows, may be of interest...

  Thank you!

  Hello:

  Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• Manually change the database of Photos?

  Is it possible to manually edit the database of Photos?

  I was diagnosing a problem that surfaced after initially migrating my library, iPhoto photo some time ago.  It seems that a large number of photos in the iPhoto library had wrong file paths.  The pictures themselves were there, but iPhoto had an error in the paths of files.  (This happened probably years of updates, transfers to different machines, etc.  It is a very old and very large library).

  I used a third-party tool 3 to begin to correct the problem in the iPhoto library, and so far, that seems to be promising.  This approach however, kill my library of Photos and re-import to iPhoto.  Which seems a bit risky for me, maybe lose pictures added since the migration (which is not bad), since I'm not really sure how interaction with iCloud will manage this attempt.

  But it presents to me unless I am able to inspect and change some of the data that the readers of the library of Photos directly, so maybe I can apply a fix directly without having to re - migrate.  It seems that after the XML files for libraries, but there may be another approach, that I could use to directly modify the photo library?  All I really need to do is change some paths that point to pictures.

  Here's a post by user Pascal MaH describing how he managed to modify an iPhoto database.  Maybe you can use the technique to alter a database of Photos.  As usual, don't forget to have a backup current library before you try:

  Pascal Mah

  Re: iPhoto 11 referenced library problems

  July 27, 2011 16:28 (in response to Terence Devlin)

  YES!

  I finally managed to get my iPhoto library!

  But it has not been easy. I had to hack into the database file that you want to put in place good things.

  After much trial and error, here is the procedure I came to, that finally worked for me (use at your own risk):

  0 make sure you do enough safeguards so as to revert to the previous state if something goes wrong!

  1 make a copy of your photo library in iPhoto [Show Package Contents]/Database/apdb/Library.apdb on your desktop.

  This file contains most of the necessary data for the management of your data in iPhoto.

  2. open this file using a SQLite database manager.

  I've used Navicat 9.1, which has features nice import-export. For direct editing, basic 2.0 is may be easier.

  3. open the RKMaster table.

  This table contains all the records for the individual photos in your library.

  4 fix the path of each of your photo files in the imagePath for their course filepath column.

  It contains the path of your photo files at the time they were imported and is not updated by iPhoto, even if you have moved your files photo somewhere else.

  If you have thousands of ways to correct, a good idea is to export this column in a text (including column modelId for SEO) file and to correct the paths using the substring function search & replace in your favorite text editor. Do not forget to re - import data properly corrected using column modelId as references.

  5. If necessary, correct, in the same way, the content of the column fileVolumeUuid to the value of the drive that currently contains your picfiles.

  If so, get this value given a PIC that was recently imported from this player.

  6. If your drive name has changed, also to correct its name in the name column of the RKVolume table.

  Identify the appropriate record taking into account its uuid obtained previously.

  7. If you are satisfied with your work, leave the database, program management and restore Library.apdb to its original inside your iPhoto library location.

  Keep the old somewhere in case something goes wrong.

  8 run iPhoto to see if your work is successful!

  At this point, you might consider the construction of the library (hold down alt - cmd at the launch of iPhoto) and choose repair the iPhoto library database (make sure to let him rebuild the AutoSave iPhoto library database disabled!). This could correct some possible unconsistencies resulting from your changes. Also, a good thing would be to rebuild all thumbnails. If iPhoto don't you do not bug to locate files during this process, you may have done your work right! If this is not the case, go back to step 1.

  As said, it worked for me, without visible inconsistencies or side effects to be noticed in the behaviour of iPhoto (at least for now). But perhaps some knowledgable people could comment on and improve this process, and a database script guru can also help automate this. Please comment.

  Lessons learned (how I understand things as far as I know):

  A. Library.apdb stores the original drive and the path to the picture at the time files wherever they were imported. It is not changed because the files are moved.

  B. some other data (BLOB Binary?) are used to track the files to their actual location. Therefore, it seems OK to move photo files once they have been imported.

  C. Unfortunately, these other data are broken, if the file is re-created (even with the same content and location), for example with one based on files backup and restore (Time Machine).

  (D) in this case, iPhoto is unable to repair the file if its drive and path does not match the one when the file is imported, stored in the database. Also, there is no mechanism in iPhoto to correct these data.

  (E) therefore, it is very important to import photo files in iPhoto only when they are already in their final location! Otherwise, your iPhoto library won't survive a Time Machine backup and restore! (A disk block-based backup might work... I don't know).

  F. ... And Apple should really, really solve this problem! (Correcting the filepath to the current location of the file and stored at least when the database is repaired, and by offering at least some basic file options reconnection).

  I have not tried so I can't confirm or deny its effectiveness.

  

• Impossible to deploy the database of NOR-XNET to target RT PC

  Hello

  I am trying to deploy a XNET database to a target RT PC simply by following the tutorial here: http://digital.ni.com/public.nsf/allkb/9847EF6F2D867BC186257DCE00626236

  However, when I click on deploy nothing happens; I get no error message and the database alias does not appear as present in the aim of RT (the entire list is empty for the RT target). If I run my code, he complains about the database not being is not present, so I don't know that it isn't here.

  I checked with Max OR and target a NI-XNET 1.6.0 installed. I'm using LabVIEW 2015. I have no problem connecting to the target. I tried an another new database created with LabVIEW 2015, without going. I tried to disable the Windows Firewall as suggested in a similar position (http://forums.ni.com/t5/Automotive-and-Embedded-Networks/Unable-to-deploy-NI-XNET-Database-to-RT-Tar...), but that no longer works.

  Help!

  Thank you

  Hello

  It seems that I have the latest version of XNET on my target and the crowd at the beginning, but just to try something I did the following:

  • I have reinstalled XNET on the target using NOR-MAX. I had to uninstall dependency package "nor-xnet for NI-CAN compatibility library", before doing this.
  • I have uninstalled and installed the last XNET on target as well.

  After that, things worked!

  Thank you

• How can I disable the fingerprint reader? I use an HP Envy 15-k064nd laptop.

  Nice day

  I just bought and Im the proud owner of a HP Envy 15-k064nd laptop.

  I would like to disable the fingerprint reader, because he keeps asking codes while I type on the keyboard. Could you please help me telling me how I can disable the fingerprint reader please?

  Thank you

  Anne-Els

  Please follow the steps as indicated below to solve the problem

  Disable the biometric identifiers:

  Delete the biometric login option:

  Control Panel > biometric devices > change biometric parameters

  Uncheck the BOX "Allow users to log on to Windows using their fingerprints"

  Save the changes.

  To remove the biometrics data for all users, click the option button (round) "off biometrics.

  Clear validity sensor driver:

  Validity sensor driver controls the fingerprinter material.

  SimplePass software manages the password database.

  You can disable the device.  The fingerprinter work not long until the device remains disabled.

  Control Panel > Device Manager > biometric devices > right-click on Validity Sensor > disable

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• VAIO Messenger-unable to connect to the database

  I had this problem for months. When I connect to the internet... about 10-15 minutes later... a box opens "Vaio Messenger unable to connect to the database." I'd like to just turn off Vaio Messenger. I looked up how to disable Messenger but he always States go to the settings dialog box. For the life of me I can't find a dialog box. How can I disable Messenger? How do I repair Messenger so it CAN connect to the database? Help!

  I had this problem for months. I can't change the dialog box. I can't uninstall vaio Messenger. I have so much pain to find this site, if you have a cure please write me [email protected]

• How to disable the mouse House?

  Original title: disable the mouse linger

  How can I turn off this ridiculous mouse dwell.  It keeps jumping my cursor to anywhere where I got the slider when I started typing.  He also chose boxes when I do something else and not made a meticulous effort to put the cursor somewhere safe.  I have accidentally gone to several advertising sites and got a multitude of viruses the other day.  This "option" is a threat.  I have restored my driver and that he did not.

  Hi PatrickBoyle,

  1. Did you the latest changes on the computer?
  2. You use the portable computer touchpad or mouse on the computer?
  3. You have security software installed on the computer?
  4. Where you can remove the infection by the virus of the computer?

  Method 1

  If you use a computer laptop touchpad, I suggest that you turn off and then connect the USB mouse to the computer and check if the problem persists.

  Check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  I also suggest that you scan and remove any malware or computer virus infections and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx