Disable the Structure (bug or expected behavior?)

Similar Questions

• IOM disables the user on the end date

  Hello
  
  We have inherited the IOM system therefore needs to check the default IOM. When we enter the current date as the end date, IOM automatically disables the user. This custom behavior or it's the default?
  
  I ask this question because the new requirement is that the user must be turned off at 18:00 the end day immediately after the reconciliations.
  
  
  Thanks in advance

  It is on the behavior of the box.

  Thank you
  Suren

• a bug with the structure that contains bit fields?

  using CVI 8.5. I tried to set up a structure that contains bit fields. Although the structure compiles, I encounter strange behavior when you access individual fields, while the value of the overall structure seems ok. Here is the structure:

  typedef struct
  {
  Union
  {
  struct
  {
  unsigned int Flag1: 1;
  unsigned int dummy: 3;
  unsigned int Flag2: 4;
  unsigned int Indicateur3: 4;
  unsigned int dummy2: 4;
  };
  unsigned short;
  } flags;
  } flagset;

  When you set the Member 'all' to a value so that one or more indicators, but not all, are false, I still read the individual like real flags, until all flags are set to false.

  I missed something? This definition is really legal?

  Please find attached a file showing the problem.

  The same issue is at stake with or without the ternary operator. It turns out the problem was not specifically with printf, but rather a bug in the compiler that is related to the evaluation of the members of anonymous internal structures. If several internal anonymous struct members are evaluated before the compiler actually do anything with the result - which is the case when passing arguments to a function-, so they will all be evaluates the value that was evaluated last.

  A. Mert

  National Instruments

• VMware Workstation 10 bug: DVD SATA drive does not start if we disable the floppy drive in the VMware BIOS

  Hello

  I use VMware Workstation 10, and I found a bug:

  With the all-new virtual machine (for example with Windows 8 x 64), if I choose a hard SATA and SATA DVD drive in VMware and I have to disable the floppy drive in the VMware BIOS, Windows 8 (or Windows 7) ISO does not start.

  If I come back in the BIOS to enable the floppy drive once again, my ISO boot.

  If I use the DVD IDE drive in VMware options, no problem if I disable the floppy drive.

  With "EFI mode", no bugs.

  Please, can you solve this problem? Thank you

  Hi freebeing,

  Thank you for reporting this issue.  We have reproduced it is internal and work on it.  Sorry for the inconvenience.

  See you soon,.

  --

  Darius

• How to disable the user to not import the structure of the table in ODI

  Hello
  
  I want to disable the not not to import the table structure in to ODI. How we achieve this.
  
  Please let me know.
  
  Thank you.

  Take the metadata of the user Admin role

• Worth the user events until the structure of the event runs?

  If I create and enter a user event and immediately generate this event before that my structure of the event has seen the refnum inscription, is the event that is always guaranteed to be seen by the structure? In other words, events are queued to the top? It works, but I wonder if I can count on it. I am very sure that I can but I'm setting up a production code and want to be sure that I do not take just the benefit of a bug.

  A picture is worth a thousand words.

  

  To my knowledge, the registry for event creates the queue. This behavior is always the same in 7.1, so don't expect to change.

  I think that there was a recent discussion on the lavas on that, but I did not.

  Felix

• Time Dimension type to different values in the attributes - Bug or feature?

  Not sure if this is a bug or a feature.
  
  But if there is a time dimension hierarchies. You have the option of specifying different values for member attributes in different hierarchies.
  
  For example.
  
  A hierarchy has MIN_ID for its members and uses MIN_END_DATE for its end_date
  
  Hierarchy B has MIN_ID for its members and uses SESS_END_DATE for its end_date
  
  According to this message and a comment by David Greenfield:
  
  Gender issue when several mappings for different hierarchies
  
  "You try to map the same attribute, SORT, on different columns in two hierarchies? In other words, what do you expect the same Member to have different values for the attribute in the two different hierarchies? If so, then this is a problem because a member must have the same value for the attribute independently of the hierarchy. »
  
  Unlike a dimension of the user, a time dimension seems to allow this and it seems to work as expected. Behavior in this case is the difference between a user and the time dimension?

  Your description of the structure of the dimension is very clear, but I have a question about system requirements. When you say you want to the time running from 17:00 to 16:59, do you mean that the calculation must spand day? for example "5:00 PM: Jan 1, 2012" to "4:59 PM: 2 Jan 2012".» If so, then this you is impossible by making a loop only the dimension of time-seconds. Or do you really mean it must wrap around the same day. for example "5:00 PM: Jan 1, 2012" at "11:59 PM: 1 Jan 2012", then again to "00:00 AM: 1 Jan 2012" to "4:59 PM: 1 Jan 2012"?»»»

  If you want the calculation for the period of days, then I think you need to spend TIME on the DATE dimension level. You can leave some MINUTES in the second dimension, which can be a dimension of standard user. You must then two levels of the DAY (with different members) in the date dimension - each with a different set of the child. You can assign the TIME_SPAN to the TIME level 1.

• using the structure of the event in the LabVIEW classes

  Hello

  I'm new in the use of LabVIEW classes, so don't know much how I can use them.

  In my main program, I have clusters with five elements in each. The elements are controls two States and in some groups, there are three States controls. The user will press the buttons (controls), and different things will happen. In my first program were I not using classes, I had a structure of the event and the controls were cases of event in the structure.

  Is it possible to somehow use an event of cases in one of the methods that is created in the classes, so that say, that's not in the main program?

  I have attached two photos: I wanted to have a structure of the event in servoTouchEvent (in left.tri.lvclass) who is a child.

  Let me know if my explanation is not clear.

  Grateful for the help!

  Hello

  Yes, you can have a structure of the event in a Subvi rather in your main VI of top-level UI. The trick is to use the 'Save for events' and passing in references to orders that you want to have the event trigger structure for. The refnum output since the function is entered in the terminal of dynamic event of the structure of the event who could live in a Subvi. You can add instances of event where you will see these control events as dynamic events then you can do something with. These excerpts from shows all the code in a simple diagram, but the stuff in the structure of disable diagram could easily transformed into a Subvi:

   

  All this can be done without classes. What will buy classes you include the ability to encapsulate your screws and also perform different code based on what object on the hierarchy of the parent-child classes is on a wire. If the behavior of your code is different between 2-3 State and controls (which I do not know what state controls 3 you are referring), you can take advantage of the classes.

• Button value change records in the structure of the event, but does not change appeaance?

  Hello world

  A quick question... I hope someone can answer...

  I have a code that uses a PS button within a structure of event to trigger a signal of AO... My code is below. The code works fine and the OD goes off when you press the button E-Stim... But when pushed the button does not change with reliability the appearance (i.e. of the gray 'off' red 'on' color)... Sometimes color changes; no other time not... If I remove the structure of the event and the survey button in the appearance changes as expected.

  What is going on? I would like the button to change the colors on the user interface to indicate that it works... Should I programmatically control the color?

  Kind regards

  Jack

  

  I guess that when query you the button you have some delay in your loop? Locking means that the button will change its value when you press it, then switch back to the original value once the value of the control has been used by the code. When you ask, this means that until he reaches the next iteration of the loop, but in the case where the structure that will happen immediately.

  The default setting for the buttons to modify its behavior as in most of the application would be latch releasing. You then raise the event when the button of the mouse over the control. This also allows "drag" control if you push down on the subject, given that you do not release control in this case.

• In place the structure with replacement of table element uses wrong index

  Hello

  I use the place in structure of elements and notice any strange behavior: if I replace elements in a Subvi and then calling VI, the index is off by one calling VI, most of the time. I saw one or two tracks where the index was correct. Searching for the forums have provided other problems with in place it the structure but not exactly it.

  Attached are a couple of screws demonstrating the problem and some screenshots.

  It seems that you have a problem of optimization of LabVIEW.  It seems that the value of the line is get incremented in your Subvi and that it is somehow going to the main VI.  If you always put a copy in your reset_selections.vi call, I was not able to get the error to occur.  There was a couple of bugs similar to this one.

  You can always add another copy in front of the call to reset_pages.vi, but I never had the problem to occur without it.

  

  I have attached the modified so VI.

• Unforeseen event, captured by the structure of the digital change notification event

  Using the specific or similar to http://decibel.ni.com/content/docs/DOC-2280 code (change digital notification.vi) I'm observing behavior unexpected, but coherent structure of the event. The structure of the event capture an event, the first time data is received in the structure of the event; even if there was no change in the digital port assigned. After this initial unexpected event, the structure of the event behaves as expected.

  I just wanted to know if someone had a glimpse of it. What is the task of detection of change this event to initialize?

  In this case, you would have to ignore the event first, which in my opnion is valid because it reserve no value to a value.

• How can I solve the unpredictable minimization of windows behavior in executable?

  Hello world

  I'm having a problem with the size of the window in executable versions of my program. I tested my executable in XP (which is not the development environment) and win7 (which has the development environment), and for me the façade appears correctly. It keeps the size and dimensions I've specified in vi and maximizes the as you would expect.

  When my employer test program on its own systems of win7 and xp, however, it gets a strange behavior. The front panel displays much smaller than specified, such that there use the scroll bars to see all the features. When he tries to optimize, maximizes the gray background, but the front does not. In other words, scroll bars remain in the same exact spot, and he sees no more of the façade when the vi charge first, as it has always scroll to see all the features.

  I thought it was just a weird generation bug, but it turns out that this has been a problem all the time I sent him built (a few months), so just reconstruction will not help. I can not reproduce the error, which makes it really hard for me to fix it.

  Any ideas?

  Thank you

  Alex

  In turn we just had a miscommunication - it is not really a problem!

  Thanks and sorry about that,.

  Alex

• HP ProtectTools security manager startup disables the keyboard to exit

  Not really sure if this ensures a thread, but I just ran across a bad bug in hp ProtectTools that prevents me to enter my BitLocker PIN at startup. I made the mistake of activation of the POST behavior that requires fingerprint/password when I start my computer. I say mistake because now the application is disable my keyboard at the exit, preventing me from typing my PIN, BitLocker, or even tapping F12 for network boot.

  I tried to plug in a USB keyboard that made me only once. I thought I had solved the problem. (I should have uninstalled startup options when I had the chance!) Now, the Director of security of startup is disable the keyboard on board when it starts AND the USB keyboard when it ends. I tried almost all channels through the menu options in the hope of a different outcome. My only remaining option seems to be to reinstall the o/s to a DVD.

  It's really more of a complaint rather than a cry for help. I enjoyed the unique connection for a short period, but cursing hp to release a product that so easily loses his own material. Another day in the toilet that I reinstall - assuming I can reinstall...

  UPDATE: flashed the BIOS to version F.20, which seems to have solved the problem for me. YMMV.

  Note that the keyboard and mousepad (!) were non-functional, but I managed to limp with USB components. Updated the BIOS seems to have fixed problems of mouse and keyboard. Fingers crossed!

• How to disable the animations of the 'boring' UI in Lightroom...

  By that I mean a few things in particular...

  1 Zoom in / out animation.

  2. the Virgin UI adjustments that appears whenever you switch between photos to develop...

  3. the annoying incorrect display an image at magnification 'equipped' with the harvest so incorrectly size covered with the interface user the first time you enter the crop on a newly displayed image tool.

  Surely these things can be disabled? In general, I can't imagine why I would like to see "smart" animations of the user interface more with just the UI correct "blitted" too much screen as soon as it is ready?

  I see that you posted the bug report about the undesirable behavior when you view window/guides of cultures.

  (I checked my old installation of LR4.4 and is not the same thing)

  And I myself remember at least for the first version of the LR5 worked without the cropped image display jumpy.

  If dig you into the other bug reports, it seems that it came when version 5.2? has been released.

  I don't remember when I first noticed it myself, it's more noticeable when changing between locations reports l / h/cultures.

  Moving between photos that are all grown in the same aspect/location and it's much better. It of as if she remembers the sight of the harvest of the previous picture, then updated to show current.

• Disable the parent window when the child window is open

  Hello
  I need to open a new popup window using javascript .i don't want adf use predefined function such as dialog, _target, usewindow (according to the req) .but I can able to open a pop-up window, but parent window is still active (not disabled) I'm clicking on parent window when the child is open.
  
  what I did:
  
  (1) I used in light of the fn on the onclick event of the command button
  
  < script type = "text/javascript" >
  var popupWindow = null;
  function popup() {}
  popupWindow = window.open ('http://10.14.1.1:9002/a/b/c/d/payment/Settlement.jsp','abcd12','height=600,width=600,top=0,left=0,resizable');
  popupWindow.focus)
  }
  
  < /script >
  
  give me good suggestion to solve this problem

  Siva,

  A quick google search revealed that the behavior you're seeing is an expected behavior of the modal dialog box.

  See if the given suggestion [this post | http://www.experts-exchange.com/Web/Q_20832231.html] help.

  Jean Lou