Bridge camera not recognizing (but lightroom, iPhoto, etc. see it is fine)

Similar Questions

• Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

  Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

  Hello

  Since you said it worked very well recently, I'll try to do a system restore at this point in time.

  See this link: http://windows.microsoft.com/en-us/windows7/products/features/system-restore?SignedIn=1

  In addition, see the response of the Meghmala and follow the instructions listed there. I think that the three method might be the best of the bunch for you, but they have all the right steps.

  See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/usb-device-not-recognized-in-windows-7/8106a712-a13e-4ca5-b82e-c3961cc254b1

• Goal not recognized by Lightroom despite the profile of lenses available and correct metadata in the RAW file

  Hi all

  In Photoshop Lightroom CC (latest updates installed - v2015.5) my Tamron 15-30 mm f/2.8 lens is not recognized, only an opportunity for the focal length and aperture are visible.

  The profile of lenses must be selected manually - but even after selecting the lens information are not available for the photos in the library module, so I can't search/filter for this purpose.

  In the RAW files from my Nikon D750 written in the metadata correctly: target = 15-30 mm f/2.8 and LensIDNumber = 233.

  Funny enough for the 24-70mm f/2.8 Tamron everything works-> his profile is automatically recognized in the develop module and I can / filter to search for it in the library module.

  Any advise?

  Thank you and best regards,

  Meik

  You are probably affected by this known bug: -lens-metadata-field-missing-on-import https://feedback.photoshop.com/photoshop_family/topics/camera-raw-9-5-lens-information-aux

• TouchSmart 520: Camera not recognized

  I had my Touchsmart for 2 or 3 years now and have always used with Google Photos (Picasa) for edit and download. I first used a Canon EOS 400 d and a couple of years, upgraded to a 7 d. All were working well.

  Last week, I returned from vacation with about 1,000 pictures on my camera and my Touchsmart plugged the cable of the camera as usual, but it does not recognize the camera. She did little to sound a device makes when something plug into a USB port, but would not see the camera. I looked in the Device Manager to see if all the indicators showed ofr questions USB, none was.

  I restarted the Touchsmart, always the same. I removed the two external HARD disks always the same so that the camera was the only thing that connected, I tried the camera cable in all 6 USB ports, the same. I tried another cable, the same thing. I then tried a card reader with the CF in this document card, initially the same. Then I had some weird problems with the PC it recognized as an external drive but showing some strange characters in the view, but as soon as I tried to access the missing drive.

  I looked to see if there was a specific driver for the 7 d, but there is not, then I downloaded the Canon EOS s/w utility and tried to see if that recognizes the camera but it didn't.

  I jumped, then the CF card in the camera to find that the camera now showed the map in a vacuum; You can imagine how I felt thinking I had lost 7 days of vacation photos! I tried on the Touchsmart once again and it was the same thing, so I took a few pictures and they have now read on the camera but it was all that was there. I accepted that I had lost all.

  Last resort, I plugged the camera on Asus laptop, W8 for my wife and it recognized the camera and I downloaded on his laptop, then used a HARD drive them to get to the mines.

  I then formatted the card in my camera and tried CF in the Touchsmart, still does not recognize it. So, I ordered a new card see That happened today, I took some pictures in the garden, plugged the camera on the Touchsmart and you guessed it, he still does not recognize. I tried to plug in the card reader and it shows up as an external drive, but as soon as I plug the inside CF card, it is the view.

  Therefore, I hope that someone out there can help as I don't want to have to go through the process of loading on my wife's cell phone photos, copy them to a HARD drive, and then loading them on my Touchsmart whenever I have to deal with pictures.

  Hi again botty1963,

  Thanks for the quick response!

  Because your computer is not able to recognize the camera from a previous restore point, please call our technical support at 800-474-6836 for your desktop computer repair options. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
  
  I hope this helps!
  
  Concerning

• Peripheral PnP USB - muted, is unplug sound when not touched, "device not recognized" or a malfunction, etc...

  Here is an exhaustive list I hope what happens (it's the Microsoft forums, so I think you guys are going to read a lot of information):

  • The sound on my PnP USB audio device cancels randomly without any reason. It is not to be touched at all, and often happens when I'm even not listen to all the sounds.
  • Before he died, it emits a blur in the helmet noise as it is to be disconnected or the cord is cut or something. I have to unplug it and plug it back several times to make it work.
  • It has been for several months, working properly, this month started anything, for about a week.
  • I can't use my headset because it is loose. I had the USB key to solve this problem, because it's too expensive get taking fixed. I did not buy the device at first hand, I got it from a family member who took my laptop in for repair and the guy he recommended and we sold two of these jacks.
  • When it goes off during a game, I can't sound to return. Sometimes I can fix it on a game (as Portal 2, for example) by going to options and change the type of sound (or any) what's called it headphones to speakers, then back to the helmet. However, the game freezes often when the sound goes off and I have to remove the usb key, and in this case the game should also be repeated. In addition, everything has sound options like that.
  • This happens randomly, but it tends to happen every five minutes or every few seconds, and coincidentally it almost always happens during a loading on a video game screen.
  • It is not always give me a warning sound, especially on the games. He's just quiet.
  • Device Manager does not display a point of exclamation or question marks next to any audio device and the key USB pnp is indicated correctly. In the options of the sound in the Control Panel, there is of the sound bars next to the USB key that indicates that his is read, but it is not in playback mode. The USB pnp is listed as default device, so don't tell me to do. The microphones are turned off as well.
  • It does the same thing in all my usb ports.
  • The driver is up-to-date and meant for Windows 7.
  • I do not install the Windows updates. Updates are bad.
  • Box for what he calls a "USB stereo Audio Adapter external" StarTech.com, or "ICUSBAUDIO". It came with a disc that I used to install the driver, and I went on their website to get one for Windows 7 specifically and installed.
  • I use a computer laptop 64 bit Windows 7. In Device Manager, there are three things listed under sound: Realtek High Definition Audio Intel (r) display Audio and USB PnP Sound Device. None of the USB devices have exclamation points.
  • For the first time today, when the usb unplug sound, my computer tells me "Device not recognized" and said it could have malfunctioned. When I clicked on it for more information, he said that he could not tell me what the usb was even because it was not plugged in, which was not true. I also had a window appears which has tried to install the device driver (already installed) and then was told that the unit had been disconnected before he could do (not true). It just happened, for the second time today a few seconds ago.

  Hello

  Check out the link and run the Fixit and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Install the Windows updates as some updates can fix a problem.

  As you mention that the computer is second hand troubleshooting accurately would be difficult. I suggest you contact the manufacturer. Check out the link.

  http://www.StarTech.com/support

• My SATA to USB bridge is not recognized in disk management

  I bought a few SATA USB adapter, connected to my WD hard drive and my USB port, the computer recognizes, to install software for it and that's all.
  I can't read the disc via Explorer because it is not recognized, only in the Device Manager it seems nowhere to be found, saying SPIF30x USB2SATA bridge device USB. I've searched for so many solutions and everything I find people you said to go to disk management and assign it a letter. Problem is, it does not appear. Everything I see here, is my main hard drive, divided into 4 parts, which should be normal, but in the port USB (F:\), where I plugged the adapter, it shows nothing. The adapter itself has 2 LEDs indicating power and access, with only the power light that shines. The light also keeps shining when I plug the hard disk, so my guess is the adapter is recognized, but the disk is not. The drive should work, I've so far always used internally (SATA cable from the motherboard, you know).
  Please help me with this.

  If its not seen in disk management and then the drive has failed or connection method, the usb/sata converter does not work

• Receives the error "USB device not recognized" but nothing is attached to the laptop

  I get "Device not recognized USB" popping up - I have no devices attached to my laptop USB

  Hi jamescrighton,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/USB-device-is-not-recognised-but-no-devices-are/d50b8f81-478A-4020-8FD0-a44ba44ab440

  I hope this helps!

• Error "USB device not recognized" but nothing is plugged

  Hi, this problem recently just started to happen, nowhere I can say. Whenever I turn on my computer or it wake up from hibernation, a message from the task bar appears saying "USB device not recognized". However, there is nothing plugged one of my USB ports. I have three USB ports available, and all are empty. I tested all three ports in something by plugging, and all three ports seem to work well. What can I do to get this message to stop appearing? Thanks in advance!

  Hello

  Some USB devices are integrated as WebCam, Touchpad, fingerprint and other reader, so it could
  be people or a total glitch.

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My USB devices are not recognized, but they have a power

  My USB devices are not recognized, the only ones to be recognized are my mouse and keyboard. Each device is powered (motherboard works fine), but Windows 7 isn't their read (although sometimes I'll get a code 43). I have the latest chipset.

  I tried right click and uninstall each device and rebooted the computer. Nothing has fixed this.

  My external hard drive, ipod and other devices that involve the transfer of data seem to ONLY get power and nothing else.

  It is not material because all my devices work on my laptop. Also my motherboard works fine (it's the 2nd RMA) and it has been tested at the factory to make sure of him.

  I would really appreciate help with this

  Hello

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  I would also ask you to contact the manufacturer of the computer to help.

• my camera not recognized by the correction lens lightroom

  I have the Fuji x - T10, RAW files, works very well, but the correction of the lens is not aware of my camera and when I select Fujifilm is defaulting to X 100, if anyone can suggest how to solve this problem?

  Corrections of the lens for the XT10 are integrated and cannot be disabled.  If you disable the Corrections allow profile, you will see a message at the bottom of the lens Corrections box that indicates that they are used and if you click on the circle-i you'll see exactly what corrections are applied.

• Matrix Revolution Cam not recognized on my Satellite M40

  My cam of matrix revolutions could not be recognized when inserted in the my Satellite M40 149 pcmcia slot. The first time was a stranger to me card PCMCIA MTD-0002 and when I updated the driver, it is totally ignored.

  I updated the Bios to v 1.20 and I wonder if I can do more for the location PCMCIA driver, is a Texas Instruments PCIxx21 Cardbus controller / x 515.
  Thanks in advance for your suggestions!

  Dimitris

  Hallo Dimitris

  If you want to use some special hardware like Matrix revolution Cam pick up in a first time information on compatibility and any problems that may occur. It is always recommended to visit the manufacturers support page.

  In any case I found some info that this card is distinguished not by cell phone. Only if 59 pin is detached in the specifications it should work.

  Good bye

• Folder "devices OR-imaqdx" not appearing is not in the NOT-MAX/USB cameras not recognized

  Hello world

  I have a Dell M6700 running Windows 7 64 - bit, Labview 2012 32 - bit, OR-imaq 4.6.4 OR-imaq i/o 2.8, NOR-imaqdx 4.3 and NI Vision Development Module, 2013 OR MAX 5.5.1 in addition to other modules OR series, xnet, etc.

  I have two webcams, I try to use with Labview. One is the Dell integrated webcam, the other is a Logitech C500 USB webcam.

  Or webcams are at MAX. And in fact, the folder "devices OR-imaqdx" don't market not yet appear.

  Both webcams work perfectly with the "Dell Webcam Central" software, the AMCAP software and Skype. The only software I have and who does not see the webcams is NOR-MAX.

  I uninstalled and reinstalled everything, including the operating system, with no luck at all.

  It seems to be a common problem but I can't find no response except for a possible cause. In one of the posts I've read, one of EI said that NEITHER-MAX requires the registry key "DevicePath" so I wonder if a registry problem is the cause.

  What exactly is OR-MAX looking to recognize webcams and create the folder "devices OR-imaqdx?

  Thanks for the help in advance,

  Mike

  I wonder if this could be a manifestation of a recent problem that arose. Can you try to rename "niu3v.dll" in C:\Windows\SysWow64 and then closing/re-open MAX?

  Eric

• CD and camera not recognized in the bios

  original title: cd and camera is not reconised in bios

  My camera and DVD disc does not appear in Device Manager or the bios

  A camera may or may not appear in the BIOS, but a DVD player should without a doubt. It seems to not have and be in need of replacement if the BIOS do not see it.

  writing in the new message: * e-mail address is removed from the privacy... *

  My camera and DVD disc does not appear in Device Manager or the bios

• SX20 camera not recognized

  Our telepresence PrecisionHDMC 2.5 x camera is no longer recognized by the SX20.

  The camera itself shows a blinking white light and it seems to be stuck trying to adjust. He clicks on 8 or 9 times, waiting a second or two, then on again. The electronic web, diagnosis show the camera like:

  ERROR: Selected input Source video

  No video signal received on the configured video source (video HDMI [1] 'Caméra')

  The logs show:

  May 18 15:54:14.054 a8 appl[1677]: 18790.20 VIDSRCCTRL-0 I: HDMI format change vidIo event - [email protected]/*  */, src 0
  May 18 15:54:14.055 a8 appl[1677]: 18790.20 VIDEOLC-0 I: VLC_readySignalSourceEvent port:HDMI 1: no signal
  May 18 15:54:14.056 a8 appl[1677]: 18790.20 VIDSRCCTRL-0 I: HDMI format change vpss msg - [email protected]/*  */
  May 18 15:54:14.056 a8 appl[1677]: 18790.20 VIDSRCCTRL-0 I: Send format change msg from HDMI to requester - [email protected]/*  */, src 0
  May 18 15:54:14.056 a8 appl[1677]: 18790.20 VIDEOLC-0 I: Received SourceFormatEvent from video link 1 ([email protected]/*  */, unknown type, timings not found) in ready state
  May 18 15:54:14.275 a8 appl[1677]: 18790.42 CAMERA I: CamVisca: ReconfigureAll
  May 18 15:54:14.276 a8 appl[1677]: 18790.42 CAMERA I: Keeper::getCamera: camera -1 unknown

  The version of the software is the recommended and running systemtools camerarescue makes no difference... There is another thing to try to fix the camera?

  If the camera is just clicking and don't move does not correctly, it is likely that the camera has stuck, either accidentally, or by a person moving by hand for the CMV align properly inside.

  You could try rotating the camera manually to try to get back on the track, or you could do a RMA number on the device through the TAC.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Fuji ax200 camera not recognized

  Have a new Dell laptop with Windows 7. Connect the camera - get usb on the screen of the device. No recognition by a camera assistant, or workstation, i.e., no camera 'reader' does not appear. Can take out the memory card, plug in and get the pictures in this way in windows explore. Not nice!

  Hold the camera recognized and I'd love an identical to the Assistant Assistant scanner and digital camera & XP.

  Any help is appreciated!

  Hi Bill,

  I see that the camera is not getting recognized. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. are you able to access other devices usb on the computer?

  Method 1.

  Connect the camera to a different computer and check if the camera is detected.

  Connect another device usb on this computer and check if the device is detected.

  Method 2.

  Connected to the camera and run a hardware troubleshooting to verify.

  To open the convenience store follow the given link: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 3.

  You can update the camera driver and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/is-IS/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Method 4.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

   

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Refer.

  Install a USB device: http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Let us know if you need assistance with any windows problem. We will be happy to help you.