Disable the video clip after 2 s

Similar Questions

• Can not disable the video clip above buttons...

  Hello

  I have a few buttons, and above them a movie clip with a 20% transparency that I use for some graphic effects in my page. But the buttons are not accessible (they do not work) because the layer covers.

  I used the following code to turn off the graphics layer:

  overlay_mc.buttonMode = false;
  overlay_mc. Enabled = false;
  overlay_mc.mouseEnabled = false;

  but none of them solved the problem. The buttons are always covered and idle.

  Could someone help me?

  Thank you

  Add the rolling code to overlay_mc where you trigger a loop to search a hittestobject with your buttons.  disable the loop in slowing.

• Is it possible to crop a video clip after that I have turn?

  I shot a clip due to the bad my helmet camera mount.  Is it possible to crop the video clip after turning point 4 degrees?  I would not lose this sequence, but I can't use it as it is.

  I tried a clip on my computer and it worked.  My images of entry was 1920x1080p60.  At the end I chose AVCHD section and picked up a 1080 p 30, pushed the button advanced and then pressed the button Source Match.

  If you have a combination that does not work and I have one that does.

  Now I'm curious.  If you want to send the clip via dropbox or something, I can give it a try.

  Bill

• First pro does not control the properties of the video clip to match the sequence

  Hello

  I have a sequence in my calendar set at 1920 x 1080 and based on my understanding of the video clips, I place in the timeline should automatically be adjusted in cadence, resolution etc. I looked in my settings to see if an option to do this automatically has been disabled, but can not find it and the timeline is always insert Staples into their native format 1280 x 720. can you tell me what I am doing wrong? You can see in the screenshot that the video is narrowed down, thank you!

  

  This dialog box appears only when you place a clip in an empty sequence. This is to help you create a sequence quickly that meets (or not) your footage.

  To do what you want, go to your Pro first preferences > general and select the check box for the default scale to the size of the image.

  Click OK.

  MtD

• Disable the automatic reactivation after opening of the screen

  Hello

  is it possible to disable the automatic reactivation after the idle state by opening the screen? If so, how?

  Greetings
  Mr. Auer

  Hi, Matthias

  When the laptop is in sleep or Hibernate mode after the opening of the screen for laptop wakes up automatically and display will be automatically ON.

• The use of eligible margins in the video Clips, PE11

  1. Is it possible to manually resize a video in first 11 items so that it fits within the margin of safety?  If yes how can I do this?
  2. Also, is it possible to get rid of the side black bars of video clips in PE!  If yes how how to do this?

  Thank you

  Andrew-dd_1937

  What operating system executes your 11 items first?

  1. with the margins of safety on the Edit box monitor and the video clip selected, scaling the image on the screen to fit the area of interest.

  The scale can be done by clicking on the screen to bring up the bounding box of the image, then by dragging on one of the handles of the limit

  box for scale.

  Tip: Depending on the specifications of your TV, you can change the margins of safety to target edit them project Menu/Settings/general

  Title safe area

  Safe action area

  Also, in applied tab/Applied effects Palette/Motion extended effect controls panel, you can uncheck the option constrain Proportion so that

  You can measure the width and height separately.

  
  

  The scale is also possible by selecting the clip of chronology and then using the slider scale found applied effects tab/Applied effects Palette/Motion

  Expanded panel and its properties of scale.

  When you see these black border in Premiere Elements...?

  When you first slide your import to workspace Expert chronology or somewhere else. If export, then you (manually) or the project

  (automatically) have not set the correct project preset to match the properties of the source media. Thus, more information about what is

  happening here.

  Please let me know if I interpreted your question correctly. If this isn't the case, please more details.

  Thank you.

  RTA

• Discoloration video, but not out in the video clip.

  Hello.

  I need to run a video that I can turn over any other flash content.

  Since I also have to add sub titles, I decided to import the video clip into a clip. The clip now has as many frames as the video.

  I added subtitles to keyframing a line of text in the video and synchronized it upward with the film. (it was not really easy...)

  I placed an instance of the clip on my main stage in frame 10. I added an on and and STOP simply would take you to a framework later without the movie clip instance and return to frame 10 once again if you want to see the video again. It worked well.

  To book the elegant transistions I wanted to fade video in and out. So on the main stage in the frame of 10 I placed this action script:

  (+ gave my movieclip the instance name mc)

  Stop();

  Import mx.transitions.Tween;

  Import mx.transitions.easing. *;

  var myTween:Tween = new Tween (mc, "_alpha", Strong.easeIn, 0, 100, 2, true);

  well which mitigates the video when the playback head to frame 10.

  There is another part of the script that should be able to tell the end next to the clip and it melted:

  myTween.onMotionFinished = function () {}

  new Tween (mc, "_alpha", Strong.easeOut, 0, 100, 2, true);

  }

  This however, I can't work:

  (1) if I place this code in the frame of 10, the video goes first but immideately faints again.

  (2) I tried to put 15 images of code at the end of the clip, and that did not work.

  (3) I tried to put 15 images of code at the end of the clip and add _parent.  and who does not.

  It is possible to work and if so, how?

  If this isn't the case, please let me know if you have any other approach proven to suggest.

  ggaarde

  If the first interpolation works in the timeline panel, and then in the same timeline in frame of whattever close to the end you just create another interpolation there.

  myTween = new Tween (mc, "_alpha", Strong.easeOut, 0, 100, 2, true);

• How to keep the video selected after you move the playback cursor

  I use Flash CS5.5

  After selecting a Clip, the properties panel displays its properties. When you move the cursor reading by dragging the mouse, the properties of this Clip are still visible in the properties panel. But as soon as I stop dragging and release the button of the mouse, the properties panel changes - it now shows the properties of the motion tween.

  Is there a method to keep the selected Clip after dragging the playhead and do not pass the selection to the motion tween? That's because after dragging the playback slider I still need the Clip properties, so I need to select again and again after dragging the playhead.

  You forget entirely on the query editor.

  Query Editor window->.

  When you slide on your scenario, this shows you all the key properties and their values as well as real keyframes. This is where you should be inspect and adjust the values.

  

  It took me a while to return to flash animation and when I started the conversion from the classic Tween system to the new system of motion tween I didn't know that this sign existed. He brings Flash a little closer to After Effects (my favorite animation tool). It's a lot better that the classic tweens, it's safe.

• Disable the button "submit" after the presentation

  We have a form that we distributed to multiple users. The shape is defined so that presentations go to a predefined server location. The problem is that some users submit the form several times (don't know why). Maybe they do not notice the message that says 'submit form '. In any case, we want to disable the button send after submitting the form (even it is only for this "session"). I know that once the form is closed and reopened the button works again, and that's ok. If anyone has any suggestions I would be grateful. Thank you.

  Hello

  Modify the script above to:

  This.Access = "readOnly";

  your submit button will be set to read-only.

  Regards-

  Chalukya

• Removal of the video clips in arrays

  Hello

  I have this code in my Flash file:

  for(bubble in bubbleArray){
       bubbleArray[bubble]._y -= 3;
       if(bubbleArray[bubble]._y < 370){
            bubbleArray[bubble].removeMovieClip();
       }
  }

  I wonder, when I remove the film clips should I also be burst their table?

  I have an onEnterFrame function that attaches the video clips and the drives in the array, so I'm afraid that if I don't pop the table will continue to increase in size and slow down the film. This is the case, or will they be automatically removed from the table by the above removeMovieClip() method?

  They will not be removed from the table, but the table can now point to an undefined object.  So if the intention is not to try to deal with in this code, then you must delete them from the table.

• Set the video clip

  Hello I have asked that my topic to another, but this subject was mainly related to another problem.
  
  My question is;
  
  I have 3 x 3 squares square ("box_mc" s movie clip duplicated from 1 film clip "box" on stage)
  
  I want to put a small box (it's the video clip "smallmc") in front of cotyledon (which is one of the other mc "box_mc" already placed on stage). When I click on the big box (I mean "box_mc"), I would like to join an instance of "smallmc" in front of a large.
  
  I have this code in the 'box' mc;
  on {(press)
  If (this.selected == 0) {}
  trace ("checked");
  selected = 1;
  _root.attachMovie ("smallmc", "smallmc" + count, getNextHighestDepth (), {_x: this ._x, FLF: this ._y});
  _root. Count ++;
  trace (_root. (Count);
  } else {}
  trace ("Unselected");
  selected = 0;
  _root. -Count;
  trace (_root. (Count);
  }
  }
  
  but this code puts "smallmc" under "boxmc": ((et 1 plus de problème;))
  
  I have 3 x 3 boxes big; and when I click on a "boxmc" he puts 1 smallmc then I click on another 'boxmc' is 'smallmc' but a previous dissappearing. (but this isn't prior problem I think first I should put small boxes in front of the biggest)
  
  Thank you for your help tips
  

  Don't know if this will help but: getNextHighestDepth() is not autonomous
  method - it is a method of a MovieClip. You need something like:
  this.getNextHighestDepth () instead.

  --
  Dave-
  Adobe Community Expert
  www.blurredistinction.com
  http://www.Adobe.com/communities/experts/

• Clips of the video choppy after export to the formats .m4v.

  I created a photo slideshow with some video clips.  The clips will play in Quicktime, Photo Slideshow, etc.  But when the slideshow is exported in a .m4v format film, the clips are jerky.  Even the DVD created with the .m4v movie plays jerky clips.  Is this a problem with the picture or the format that I export?  Or maybe even my DVD Creator which is Wondershare?

  It probably comes to DVD conversion, but you do not say much on what parts of the film are jerky.

• How can I change the speed of a video clip after which makes a smart object?

  In order to apply the same Camera Raw filter for each segment of a clip that I was going to split several times, I have converted the full clip to a smart object, applied my settings Camera Raw filter and then split the clip and remove parts.  Now, I want to do some parts of these clips slowed, but even if I right click on the right side of the layer and select 'Clear Smart Filters', all I see when I right click on the item in the Assembly are query options; I can change is no longer the speed or the audio.  Is it possible to do without having to make all cuts at first, change the speed and audio and then having to go back and convert each individual segment in a smart object and then apply the same filter of ACR for each of them?

  Once you have converted a video clip to a smart object, it is more technically a video clip. All dynamic objects are treated equally, regardless of their content. So, just as you cannot change the read speed of a smart object non-video, you can do it for a dynamic object that contains the video. But if you double-click the thumbnail to a smart object layer, you open the embedded file and you can apply settings to this file-centric video.

• Is there a way to disable the project window after creating a new subitem of scrolling?

  I am often editing short aftermovies of the parties, and my workflow is as follows:

  (1) capture and stash movies into a single folder (there is very little opportunity for the planning of specific plans or tagging of videos on the fly)

  (2) ingest media in prelude and browse clips identify useful, subclipping and marking images

  (3) rough cut (possibly) and fine cut of the music in the first

  Step 2 now is where I am really being slown down. Ideally, I would like to go through all the media as quickly as possible. Usually there is only a single subelement with a clip.

  However whenever I add a subitem project window as a whole just scrolls and focuses on the new subitem, and to continue to the next clip, I have to scroll to the top, laboriously seek it or search for it by numbers.

  I thought that order the clips by date would solve this problem because I expected the focus to go to the subitem that should appear right next to the current item. But there is a clear bug in the prelude it is. When you add a subitem whilst having created Date you place your order on what is happening: first a subclip is created down like the order of the user and window emphasizes this point, then the subitem moves instantly after the clip but the view didn't refocus, leaving me in a situation may be even worse.

  It would be great to be (or all):

  1. Remove the bug to update and refocus on the subitem reordered instantly
  2. Added an option to disable automatic scrolling of the project window
  3. Add keyboard shortcuts to move to the previous/next clip
  4. Add a filtering more options for the subitem current only such as the clip alone, Non-tag tag only, video only (ideally through an option of custom filter with check boxes so that you can adapt to your needs)

  Again, this is a big step upwards of multi media organization nightmare of the first window but some (perhaps quite common) use cases are always very refined.

  If mentioned previously mentioned options are already there, please let me know, thanks

  Or said in passing when talking about bugs associated command, try to create a new bin when having Date created sort on. The tray is displayed with its name change, then it pops up and voila you are renaming the last item in the list. Like what the hell guys, you check even the user interface or is CC too fast turnaround for this?

  Loving salvation,

  In my view, the scrolling after you add a subitem issue with display of the icon in the project Panel. I checked prelude scrolls without concentrating on the subelement.

  Please mention your applications features on the following link:

  Feature request/Bug Report Form

  Regarding your 2 concerns, I think that you check the lists of:

  1. create a new bin when Date created sort on. The tray is displayed with its name change, then it pops up and voila you are renaming the last item in the list.

  2 when you add a subitem whilst having created Date you place your order on what is happening: first a subclip is created down like the order of the user and window emphasizes this point, then the subitem moves instantly after the clip but the view didn't refocus, leaving me in a situation may be even worse

  Please mention the version prelude that you work with the prelude--> help--> prelude about Adobe.

  Actually I just checked the above two points. In the colon prelude works very well in front of your comments. When adding Bin, bin is created with rename on and it only remains to this place. If added subelements with Date of order is created, it is created after the main clip, not down.

  Thank you

  Mayjain

• Green vertical lines / tracks audio FX of detachment and the music of the video clip

  iMovie 10.1 on El Capitan

  This isn't a simple modification / detach Audio edition.  Is delete an image only without deleting the other independent music and audio tracks FX built under it (not worth original audio with the image).

  I built FX and music tracks on a video that has many Visual changes (with some images just by music).  Now, I want to change a few images, but when I cut the video image, some FX and music under it also disappears (tracks built under the image, not shot with it).

  It seems that green vertical lines under the picture (in the time line) are tying in various capacities, although these FX and music tracks run far beyond the video image and were not turned with the video image.

  How can I remove those green vertical lines and detach these multiple audio tracks of the image I want to cut?  Thank you.

  Yes, if you delete a video file or even attached with audio clip, the audio will be deleted also.  You must move the anchor (green line) to an adjacent element.  To do this hold command and alt (option) key down and click on in the half superior audio clip (or in the clip of Cup or title) where you want the connection be moved on.

  (If there is no synchronization issues you can simply change the audio if it is related to another clip, and then quarterback after the change of the image.)

  Geoff.