Disabled Black & White Vibrance and Saturation sliders are NOT disabled

Similar Questions

• I finally got CS2 installed on my system. But now the menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this?

  I finally got CS2 installed on my system. But now the drop-menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this? I tried to go into change preferences but it does not work

  I changed it to the value default them and that worked. Thank you very much

• Development of lighting and shadows settings are not functions

  While implementing a plugin to image processing, I learned something very interesting (for me) on the tones dark and light parameters of development.  The other basic tone settings (exposure, contrast, saturation, etc.) always map any one color to another simple color evenly across the image.  But the dark and light tones can map a given in multiple colors in a single image, depending on the location of the pixel color.

  For example, in a test image I made with Shadows = + 100, pixel (824 286) had its origin value of 16-bit color (0, 0, 0) transformed into (1724,1387,852).  Pixel (861 287) was also the original color (0,0,0), but it turns into a color very different (3093,2688,1316).

  Abstractly, the other the basic tone settings are functions (any input color is always the same output color), all in shadows and points strong are-to-many mappings (any color input can have several colors of output). I knew that clarity not was not a function - transformed from a pixel value would depend on neighboring pixels.  But it does appear to me that dark and light tones are not functions either.

  This property of shadows and highlights well known by experienced users of LR?  (I.e. Rob, I guess you knew that?)

  Yup - @Lr4 (PV2012) there are 3 settings using the new algorithm 'magical' from Adobe:

  * Clarity

  * Puts out

  * Shadows

  I don't know really enough to fill in many details, except to say that when you use - highlights or + shadows, he 'clarifies' highlights and/or shadows a bit, using the algorithm of the transformed of Laplace-based Adobe developed. Jeff Schewe made us a white paper on this subject in the past, but I do not know the link... For me, it is similar to the "Topaz" detail and Topaz Adjust 'adaptive' improvements - two Photoshop plugins I used regularly until the Lr4 is out (Adobe algorithm is very well done - in my opinion, better than Topaz labs, or others are doing similar things, for example, PhaseOne, DxO, Nikon,..).

  FWIW - it's one of the reasons why some people raise hell when Lr4 is out - no way to brighten the shadows using sliders base without getting the effect of clarification... That said, Eric Chan also informed us that extra Lr3 light had a similar mathematical algorithm it backup and therefore Lr4 wasn't new in this regard, only improved...

  Rob

• I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  Hello

  1. what operating system is installed on the computer?
  2. what web browser are you using to play the games online?
  3. don't you make changes to the computer before the show?

  If you use Internet Explorer, then I suggest you to try the steps from the following link:

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246
  
  Additional information:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Solve game problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems

  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

  Troubleshoot display with Microsoft games
  http://support.Microsoft.com/kb/263039

• Spider sometimes works ok, sometimes in the rendering mode.__sleep and hibernation software are not available when the software rendering mode is running

  I have an ASUS K501N laptop.running 7 Home premium.

  Sometimes when I turn on it the office/display is not so strong, if I click on Spider I get a flag your who says run the game in software rendering mode hardware acceleration is disabled or not supported by your video card driver happens whensleep and Hibernate options are not available.

  Other times that everything works correctly.

  Anyone know why and how to remedy

  Hi leflaneur,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. when there is no sleep and hibernate options available?

  4. are you able to play other games on the computer?

  Method 1

  I suggest that you enable the acceleration of the display on the computer and check if the game works.

  (a) open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.

  (b) click on display settings, and then click Advanced settings.

  (c) click the Troubleshooting tab, and then click change settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) move Hardware Acceleration complete.

  Method 2

  If the previous step fails, then you will need to download and install the drivers for the graphics cards updates by visiting the card manufacturer's Web site and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I reciently reinstalled windows and now the fence, restore down and minimize buttons are not mixed together.

  I reciently reinstalled windows and now the fence, restore down and minimize buttons are not mixed together. they are indervidual buttons. Have all the updates and service pack installed.

  I saw the screen shot, I think that Aero is disabled, or the Desktop Window Manager Session Manager service is disabled or stopped. Try to run the troubleshooter 'display the Aero effects. " And when firstly, you had the drivers that do NOT support Aero and then updates, Windows does NOT automatically update the settings. You must recaulculate the computer for Aero Performance Index is enabled.

  Or you can see more help on this page, which contains explanations of the Aero and a link to a Web page for downlading an application which solves the problems.

  Hope that helps!

  Marko Calasan.

• Photosmart Premium: does not copy after replacing black toner XL and colors - but has not replaced the small black

  Printer recognized all the replaced cartridges. It shows a black small as 'used '.  You wonder why it won't copy from the XL Black cartridges.  page is completely blank, unless I select color copy and then only a header is printed.

  I was wondering if I should also replace the small black cartridge.  If so, what is the purpose of the XL Black cartridge?

  test page printed out as Virgin.

  Hi @lisasw2003,

  Welcome to the Forums of HP Support! I understand that you have recently changed the cartridges on your HP Photosmart Premium, you have not replaced a smaller, and now, you are not able to copy.  One of the black cartridges is regular black and the other is a photo in the black, which is the difference between the two. Although you can't print photos, it gets ink in the cartridges.

  Please replace the used cartridge and you should be up and running again. I hope this helps!

  Thank you

• Safari and App Store are not open. Recently updated to El Capitan 10.11.4

  Safari and App Store are not open. Safari icon will bounce back and not open. App Store comes up with "App Store close unexpectedly"

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• In the Menu background, recently closed recently closed tabs and Windows Options are not enabled

  Recently closed recently closed tabs and Windows Options are not enabled.
  I tried to reinstall and upgrade to firefox v4 and nothing has changed.

  • Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).
  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "automatically start Firefox in a private browsing session.
  • Press F10 or press and hold the Alt key to bring up the 'Menu Bar' temporarily.

• I did this, copied my iTunes from iMac to Macbook Pro folder, and my playlists are not displayed on my Macbook. My iMac has been reformatted since... Is it possible to get my playlists?

  I did this, copied my iTunes folder of iMac to Macbook Pro according to the tutorial below, and my playlists are not displayed on my Macbook. My iMac has been reformatted since... It was my mistake, fitness before seeing that my playlists were not on my Macbook. Is it possible to get my playlists?

  https://support.Apple.com/en-us/HT204318

  Probably put you the folder in the normal position inside the music.  Launch iTunes while holding down the option/alt key and navigate to the iTunes Library.itl file in the folder that you moved.

• Desktop SMS and Windows Mail are not working together

  Hello

  thought I'd post here here as having a few issues with my Windows Mail but my desktop computer suffers the same problems and on a Vista forum where I posted my problem a few very useful told me who to try to solve the problems.

  One of them suddenly realized I had said my laptop is a Toshiba, and apparently the Desktop SMS and Windows Mail are not working together so that the person suggested unless I use it to uninstall apparently amongst the technically trained its known that these two programs do not like each other and explain why my office is not the problem but the laptop don't.

  After you have reset the Touch of Windows Mail (tutorial on a site http://www.vistax64.com/tutorials/ vista) wood don't be put off by vistax64 as site 32 and 64 and followed great reset Windows Mail from Brink (do not restore all mail) then uninstalled Desktop SMS and touch of the drink no more mail questions that gave me problems almost every day with marking than reading/sending project messages.

  So had to click forward then remove those bits and complete the email to send and touch wood since doing these two things as soon as send an email to the box shipment or project to obtain the number of emails in parentheses, whereas before it wouldn't happen unless I closed the program and then reopened.

  Hoping that these solutions have solved my problem and wanted to share it with someone else who wants to read this thread and you recommend Vista 64 because they are all very useful there and speak in non-technical terms for those of us not technically trained.

  Debbie

  Thanks for this piece of information. Should be useful for some of us.

• M/S using wireless keyboard 800 and some characters are not displayed correctly

  Have just connected a new wireless keyboard M/S 800, and some characters are not displayed correctly. For example, I get "when @ (update 2) is pressed on the keyboard and the £ runs it shift 3.» Am currently using XP SP3.

  No problems with my original keyboard, Wired.

  Hi simoncd.

  What is your location.  The reason why I ask this is that your keyboard is set to the standard UK layout.  Looks like you have the keyboard for the U.S. keyboard layout.  Shift + 2 is the "on the UK keyboard, @ on the U.S. keyboard."

  To change the keyboard settings you must go to "Control Panel", then "regional and language options".  The first page allows you to set the number format and character relative to your location and also set the location.  Check these and modify accordingly so badly.  You want to then go to the second 'languages' tab and click on the button "Details".  Here you can set the default keyboard.  This changes if necessary.  This should, hopefully restore your keyboard to the presentation that you want.

• When I click on a link to seend an email to someone, I get an erro message which indicates that the yahoo mail server can not connect and my messages are not sent.

  Problems sending messages.

  When I click on a link to seend an email to someone, I get an erro message that says that this yahoo mail server can not connect

  and my messages are not sent. I have a total of 9 messages that have been blocked.

  Do I need to have a pop3 address or can you tell me what is happing.

  You must have an account set up under Tools | Accounts | Mail to send from Windows Mail.  If you click on a link, it will not lead you to a webmail interface, but called instead a mail client, such as WinMail.  Around that, the only way is to copy the email address and paste it into a new message you have composed of webmail.

  Steve

• "The service user profile Service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I had the same problem.  Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked.  Then I reinforced to the back and looked at the whole picture.  It turns out that it wasn't a computer after all problem but a question of the user.  Under folder C:/users/default in the end I managed to delete all subfolders except appdata.  So when you went to create a new user he could not find the correct files to copy to the new profile to store information in.  To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine.  Of course I could create my comments and new users account once again.  Finally.

• Since I did the update, my master pages don't parpadean more good, there are texts that disappear and fonts which are not well displayed. It worked before. Can you help me?

  Since I did the update, my master pages don't parpadean more good, there are texts that disappear and fonts which are not well displayed. It worked before. Can you help me?

  Yes, thanks it works!