disabled the account of ADM - Message indicates that the account is disabled and that the system administrator

Similar Questions

• When I try to log on; the message indicates that the profile of the user didn't log in

  Original title: user profile

  Hi there, anyone know how to recover a Windows Vista administrators password.  Currently I am locked with when I try to log in. the message indicates that the user profile is not the newspaper.

  Using standard Microsoft shows a procedure to copy and paste the profile to fix it, but this assumes that the broken account is a standard user account and not the administration.  When the system asks the admisistrator password access details - of course it does not work because of the problem of user profile.  Any help would be great.
  B

  Hello I suggest you to follow the steps in troubleshooting this article and check if it helps Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile. http://support.Microsoft.com/kb/947215

• error message indicates that the new 450 turbo label printer does not support the type of paper 119

  error message indicates that the new 450 turbo label printer does not support the type of paper 119

  Contact the society of the printer.  There is nothing that Microsoft or Windows, can do to force the printer to accept a type of paper, though it says it will not accept it.

• I am trying to copy photos to a CD - RW disc nine, the message indicates that the disk is write-protected, what should I do.

  I am trying to copy photos to a CD - RW disc nine, the message indicates that the disk is write-protected, what should I do

  Hello

  You can follow the steps below to solve the problem:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  1. click on Start, typeregedit in the Start search box and press ENTER.

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  
  3. If the key exists, go to step 7.

  4. in case the StorageDevicePolicies key does not exist, you must create a new.

  a. right click on the empty field and select new > key.

  b. name the new key as StorageDevicePolicies.

  5. turn on highlight StorageDevicePolicies, and then create a new DWORD called (32-bit) as WriteProtect.
  6. double click on WriteProtectand set its data value to 0.

  7. If the key already exists, double click on WriteProtect and change its value from 1 to 0 to allow write access.
  8. exit the registry editor.

  Check whether the problem is resolved.

• Error message appears when you try to connect to World of Warcraft. The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error

  Original title: icm32.dll error message of World of Warcraft

  Error message appears when I try to connect to World of Warcraft.  The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error.  This pop-up has an "OK" button that you can click, but the message appears again and again.  I am running Windows 7 Pro 64-bit and never had this problem before and I don't know how this file was damaged

  System Type x 64-based PC
  Processor Intel Core i5 - 2500K CPU @ 3.30 GHz, 3301 Mhz, 4 Lossnay, 4 logical processors
  BIOS Version/Date American Megatrends Inc. 0805, 10/11/2011

  What should I do to solve this problem.  And any idea on what may have caused the problem.

  Thank you

  Hello

  1. What is the exact full error you get when you try to play the game?

  2 have you made changes on the computer before this problem?

  Method 1:

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  I suggest you to check the question in the clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Safety Scanner. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

  If the problem persists, contact the game manufacturer for assistance.

• the message indicates that another has my IP on this computer; who is my network administrator

  the message indicates that another has my Ip address on this computer

  What version of Windows are you using?

  In the corner down to the right (or "systray") you can click the little television (if Windows 7) or icon with the two things TV sort of stacked on top of each other (Windows XP), then click on "Solve problems" (Windows 7) or "Repair" (Windows XP) and see if that fixes it.

  When you start your computer and Windows, usually your network card tries to enter an IP address of your cable / DSL modem or router. each computer or device network needs a unique IP address to access the network with. Sometimes even if she Soundtracks and do not take a unique one, in this case to try the repair described here can reset the IP address of the computer and hopefully solve the problem.

• I download upgrade assets 13, items 9, 2 files to download, after that 1 of the 2 loaded 2nd file will not download message indicates that the part of the Archives of photoshop 13 is missing. you need all parts in the same folder. What should do?

  I download upgrade assets 13, items 9, 2 files to download, after that 1 of the 2 loaded 2nd file will not download message indicates that the part of the Archives of photoshop 13 is missing. you need all parts in the same folder. What should do?

  You can also try to download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• Xtray request: error message indicates that Xtray application has stopped

  Error message indicates that Xtray application stopped. It also causes the closing of internet explore.

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon.

  Mick Murphy - Microsoft partner

• error message indicates that "part archive of photoshop elements 11 file is missing.

  I made a purchase that included a set of free software with Photoshop elements 11 yesterday and have now two files downloaded 5 times, followed all the information I could find on the discussion forum, but still have the error message

  error message indicates that "part archive of photoshop elements 11 file is missing.

  I'm at my wits end, I really want to get this downloaded. Have been using elements 8 years and love it but I wanted to update to 11 and this was going to be perfect, but has turned into a nightmare of 15 hours trying to get somewhere with him.

  Can someone please help me before I put my pc?

  Any advice would be appreciated.

  Hi summer,

  You get the error message is indicative of the missing files for the installer to start the installation.

  Navigate to the location where you saved your download. If you see all the files ending with ".part" then the download has not finished. ". Part' files are temporary files, replaced by .7z, .exe or .dmg when the download is complete.

  For Windows the Photoshop Installer has 2 files - with the extension of .7z and the other with the .exe

  Make sure that you have downloaded the two files in the same folder. Run the .exe file to start the installation.

  Otherwise you can try to download the files from the direct download links available at: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l

  Please make sure that you follow the steps mentioned on the page before you start the download.

  Kind regards

  Ravi

• Error message says that my system doesn't have the ability to read (.) Not able to read the incoming faxes and outgoing of the TIF files).

  Original title: MS Fax.

  I try to read the incoming or outgoing faxes. A message says that my system doesn't have the ability to read (.) TIF files).

  How to solve the problem?

  Thank you

  Alex

  The 'Support' engineer's response is the dumbest answer I've seen in a long time.

  At least as much as I understand your problem, you have no problems, send or receive faxes, but rather, you can not view the faxes that have been sent or received.

  You need to get Windows Picture and Fax Viewer works again (or get a new app to view TIF files).

  Click Start, then click Run, and then type the following in the "Open" box and click OK

  regsvr32 shimgvw.dll

  Don't forget the space after the 32

  A dialog box should include the following:

  "DllRegisterServer in SHIMGVW. DLL succeeded.

  If it does not, type the following in the box 'open '.
         
  regsvr32 %windir%\system32\shimgvw.dll

  And if that fails, go to C:\Windows\system32 and check that there is a file called shimgvw.dll (or does not).

• I'm administrator, but do messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator

  original title: administrator problem

  I am the administrator with a password (in fact the only user of my computor) but continue to receive messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator. How to work around this problem? My os is Vista Home Premium.This happens more frequently when I try to remove a program

  According to what "program", you tried to 'delete '.

  If one of these programs to the system, you will get the message.

  If it's one of those programs that you have installed from the web, try one of these programs to "Uninstall" part 3:

  Revo Uninstaller 1.91
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  IObit Uninstaller 1.1
  http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

  Advanced Uninstaller Free 10.1.1
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I try to install or uninstall programs, but a message appears and says "the Windows Installer service is not to be accessible" GOLD that the system administrator has set policies to prevent this installation

  Several times I tried to install itunes but a message pops up saying

  • Windows install is not properly installed and

  I also try to uninstall programs and whenever it says the system administrator has set policies to prevent this installation, but I've changed my settings so that I can be the administrator

  • the windows service install could not be accessed
  Hello
   
  You may encounter this error message when the Windows Installer files on the system are missing or damaged.
  You can resolve the error by using the methods mentioned below:
   
  Method 1: Start the Windows Installer service
   
  a. Click Start, type "Services.msc" and press {ENTER}
  b. double-click Windows Installer
  c. the value of the Windows Installer Manual startup type
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.
   
  Method 2: Unsubscribe and re - register the Windows Installer
   
  a. Click Start, click Run, type "MSIEXEC /Unregister." and then click OK. Even if you do it right, it may seem that nothing is happening.
  b. Click Start, run, type "MSIEXEC/REGSERVER" and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass.
  After you run this command, the operation is complete.
  c. try your application based on Windows Installer again.
   
  Method 3: Scan SFC
   
  Perform a scan of the SFC to check if this is related to the missing or corrupt file system.
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error message: "the system administrator has set policies to prevent this installation." When you try to uninstall programs

  I have some problems unistalling programs. whenever I try to uninstall a program I get a message that says:"the system administrator has set policies to prevent this installation." It is also said that:"you don't have sufficient access to uninstall 'X' program. Please contact your system administrator. " Is a little boring. There are some programs I don't use and want to delete but it won't let me. can someone help me with this problem? I'm under Win/Vista Home Basic, 4 GB, AMD 64 on Aspire ast180.

  I have some problems unistalling programs. whenever I try to uninstall a program I get a message that says:"the system administrator has set policies to prevent this installation." It is also said that:"you don't have sufficient access to uninstall 'X' program. Please contact your system administrator. " Is a little boring. There are some programs I don't use and want to delete but it won't let me. can someone help me with this problem? I'm under Win/Vista Home Basic, 4 GB, AMD 64 on Aspire ast180.

  Hello

  Turn off UAC to solve the problem

  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-user-account-control-UAC-the-easy-way-on-Windows-Vista/

  Chyavan

• Setup Airport Express to Vista error "the system administrator has made policy that prevents this facility."

  I try to install AirPort Express (5.5.1.17) laptop, Vista (ver 6.0 SP 2) but the software refused to install because "the system administrator has made policy that prevents this facility." However, I am the only user of that pc and logged as administrator and there is no multiple user accounts. How can I continue the installation process?

  Problem is solved. The solution was to make the disabled user account control.

• Could not load itunes on my computer, it sends a message "the system administrator has set policies to prevent this installation" help!

  message: the system administrator has set policies to prevent this installation

  Use the program below to uninstall iTunes, if you have an installation prerequisite/corrupt iTunes installed

  Once you do this, redownload / save it on the desktop > right click on the setup.exe > run as Adminhttp://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html

  Cleaning of Revo Uninstaller and uninstall utility

  Revo Uninstaller is an uninstall utility that includes additional cleaning of system tools. It provides an alternative interface to the Windows Add/Remove Software dialog box that offers web search options, access to registry keys and some additional commands. The program also includes a Manager start to inspect and disable programs that start automatically as well as a filter to eliminate the traces of the Internet, a secure removal tool and an option to search for and remove files, folders, and registry keys that have been left during uninstall of privacy. Revo Uninstaller comes with a unique "Hunter Mode" that allows you to uninstall a program, search for more information on the web, or perform other actions by simply dragging a target on the program icon or a shortcut on your desktop.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Any other problem iTunes, contact Apple with their software:

  http://www.Apple.com/support/iTunes/

  See you soon.

  Mick Murphy - Microsoft partner