Similar Questions

• Add listener later in the timeline...

  Hi all!
  
  I have a timeline with a button (movieclip) which will show up later... What's the best way to add the listener to them? I can't do it in the first picture, because the buttons don't ' exist...
  Is it a good practice to add the listener when flash put the buttons on the screen or is there a better way yo handle this situation?
  
  Thanks for your help
  
  
  

  Thanks for the reply!

• Disable the Mouseover Action until the point on the timeline

  I seek to animate the scale of a symbol by using a mouseover action. But I need the animation contained in the symbol before there is an option to apply the mouseover action. Otherwise, the animation scaling in the conflicts of symbol with the animation scaling applied to the symbol.

  Is it possible to restrict the function of a mouse action after a given time on a timeline?  I want the symbol to scale on mouse over, but it was only after the first animation.

  Here is a simple example on using getPosition()

  GetPosition on chronology and something.zip - Box

  for you mouseenter you can add in a similar condition like this:

  {sym.$("Button").bind ('mouseenter', Function ()}

  do something

  });

• I looked in the addons Manager and I seem to have 5 versions of java installed console, do I have all or can I disable all, but later?

  I see 5 versions of the java console addons, 6.0.04, 6.0.07, 6.0.10 6.0.12 Manager and 6.0.14.Do I need all these or should I disable all, but later?

  If properly uninstalled plugins for Adobe Reader and Foxit Reader should also uninstalled in the process.

  Be careful with the Windows registry, unless you know what you're doing.

  • Always back up the registry to another source; not the current hard drive.
  • Use a program that will offer to back up the registry keys that you delete.
  • Always have a boot disk (CD/DVD, USB key) just in case you make a mistake.

  You can use Windows search to locate the plugin files and delete them if they are on your hard drive and leave the single registry. Find and delete the following files while Firefox is completely closed. After you delete the files, launch Firefox, look at your plugins, addons > Plugins, to see if the two plugins are gone.

  • The Adobe Reader plugin name: nppdf32.dll
  • Foxit Reader plugin name: npFoxitReaderPlugin.dll

  A few links for you to watch:

  1. Foxit Reader:
     • http://www.foxitsoftware.com/support/showfaq_technical.htm
  2. Adobe Reader:
     • http://kb2.Adobe.com/CPS/400/kb400769.html
     • http://www.Adobe.com/cfusion/search/index.cfm
     • http://kb2.Adobe.com/CPS/836/cpsid_83690.html

• Insertion of space between or moving along the timeline of the actions

  Can someone tell me how to insert a space between stocks or move actions in the timeline panel. I'm new on board, although I have some previous experience with Flash.

  I added a shortcut for it in the preferences.

  Otherwise, you must go to

  menu/timeline/insert time

• How to get an action that is played at the end of the timeline, then jumps

  I have a slide that has a box to check, ask learners to accept certain conditions. When the user clicks on the box (which is a form that is used as a button), I want them to see a check mark in the box, before they jump to the next slide. If I use only a simple action (jump to slide...) he moves so fast to the slide of jump that the user never sees the check mark. If I use advanced actions, I get the same result.

  I want to Captivate to do is, when the user clicks on the box, it must continue or resume until it reaches the end of the timeline (or some designated framework) and THEN go to the slide to jump. In this way, the learner can actually see the check mark before the new slide is displayed.

  I tried a number of different advances in stocks as well as the simple jump to the actions of the slide. None of them works. The slide advances still to the front flip the check mark is visible.

  Since there is no medium in Captivate to establish a brand image that will trigger an action, all of the above must be ordered from the same click, right? I tried actually exit the command jump off shares Advanced button and put on the actions by leaving the slide itself, but it does not work either.

  This seems to be a simple, basic function, but I can't make it work. Does anyone have advice?

  I tried some things:

  Shares advanced to enter:

  Hide [hook]

  Continue

  Advanced button actions:

  Show [hook]

  Continue

  Go to slide

  Show [hook]

  Affect of cpCmndGotoFrameAndResume [literal value for a framework by the end of the timeline]

  Jump to slide

  Show [hook]

  Assign a [literal] cpCmndPause

  Jump to slide

  I even tried to use a script of 'PauseMe' in the output on the slide

  Assign a [literal] cpCmndPause

  Expression cpCmndGotoFrame = cpInfoCurrentFrame - 1

  Well, he got working with the exit strategy. It seems that the problem was that I used 'Continue' instead of "Assign cpCmndGotoFrameAndResume" with a literal value. The work of the latter, the former does not.

• Back to Chapter 1 but end action the timeline loop

  Hi all

  Trying to CS6 yet precise deadlines for a reader blu - ray loop.  I understand that the way to do this is to set the end Action of timeline to the first chapter.  I did it for all the times in question, but none of them will acutally loop.  At the end of the video, the timeline returns to the previous menu screen.

  Videos are encoded H264 720 p Blu - Ray.

  A reflection as to why he is behaving in this way?  I'll try to remove and re-import the assets, re-building/linking the chronology, but other than that I am ideas.

  Let me know if you need more information.  Thanks for your suggestions!

  Lindsay

  Good mystery solved!  I re - set theTimeline on "Not defined", but substitution has not re-set the override button on "not defined".  With the two substitutes 'No Set' desired deadlines are loop now correctly.

  Thank you for pointing me in the right direction, John

• Drag the feature disabling button actions within a movieclip

  I build an interactive map and I encountered a problem. The map is draggable and I have a start and stop race function slide like an onEnterFrame function that limits how far you can drag the map. The map is displayed inside a hidden box. On the map is a lot of places that, rolled once more should appear a small dialog box with the contact information. My problem is that it only works when I disabled drag functions. When the drag functions run the buttons inside the clip map all stop working. How can I get around this?

  Drag the feature:
  Start dragging the sequence
  map_mc.onPress = function() {}
  this.startDrag ();
  };

  Stop dragging the sequence
  map_mc.onRelease = function() {}
  this.stopDrag ();
  };

  onEnterFrame = function() {}
  Limit player at the stage

  //
  If (mc_map._x < = - 1400) {}
  mc_map._x = - 1400;
  }

  Lower limit
  If (mc_map._y < = - 400) {}
  mc_map._y = - 400;
  }

  Limit to the left
  If (mc_map._x > = 50) {}
  mc_map._x = 50;
  }

  Upper limit
  If (mc_map._y > = 50) {}
  mc_map._y = 50;
  }
  }

  Example of function button:
  Distributors
  santafespringsDI_btn.onRelease = function() {}
  distributorLabels_mc.gotoAndStop (11);
  distributorLabels_mc._x = _root._xmouse + 10;
  distributorLabels_mc._y = _root._xmouse - 80;
  }
  santafespringsDI_btn.onRollOver = function() {}
  distributorLabels_mc.gotoAndStop (11);
  distributorLabels_mc._x = _root._xmouse + 10;
  distributorLabels_mc._y = _root._xmouse - 80;
  }
  close_btn.onRelease = function() {}
  distributorLabels_mc.gotoAndStop (1);
  }

  If you do what I say, you will be dragging the film which contains everything that [using startDrag (this._parent) on the background], so in the film will travel with her.  I'll post a link to an example (this same issue was raised recently so I created one).

  example: http://www.nedwebs.com/Flash/dragMap.fla

• How can I escape a loop at the bottom in the timeline

  Hi everyone, I am wanting to know if I can send the playhead edge animate again down the time line if it is currently in a loop at a point not yet passed. I tried tags and play from as an action triggered in the toilet and everything that I have work in a loop is stop and go to the url...

  Please help if you have any ideas. Thank you

  A simple example: http://www.heathrowe.com/edge/label-trigger/publish/web/

  An intro plays for 4 seconds; followed by a loop (the flashing of the title).

  I used the timeline triggers {} and tags to navigate.

  The animation reaches brand 4.5 sec and hits a trigger Action {}

  SYM. Play ('blink');

  Which redirects to the position of Timeline Label called blink at the mark 4s, creating the loop. This section of the timeline will never loop until the end user clicks on the title.

  The title of flashing a a Click, {handler

  SYM. Play ('one');

  Which it directs to another location of the label on the timeline called one, breaking thus the loop to another post.

  Download sample: http:www.heathrowe.com/edge/label-trigger/label-trigger.zip

  Note: When you get to the later label 'a' is an additional element (grey circle) with a handful of click to return to 0 (IE replay).

  Its a simple example, but if you plan to have a lot of items, good practice is to take advantage of the nested elements, groups and or symbols to "declutter" the timeline.

  HTH

  Darrell

• I can link groups in the timeline?

  In collaboration with motion 5. Many groups are in the order in the timeline. I want to remove a specific group and that the run time be filled later groups.

  This opreration is available and simple with Final Cut, but I did find a way with movement 5.

  Simplest is to treat with him to open the Calendar pane, enable the alignment and order - select all groups in the end, then click - drag on one of selected and move it up until it clicks at the end of the group that ends at the gap.

• My family in Windows XP system restore is disabled by group policy. The system cannot me to enalbe this function, despite I have a partition of my hard drive to store all backup

  When I open the System Properties dialog box, System Restore is checked, saying: she is disabled by group policy, and the system you cannot activate this option. I got a partition dedicated to my justo of hard disk to store backups and create Points of restoration with a capacity of 10 GB. How can I solve this problem?

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...
  The operation has been cancelled due to restrictions in effect on this computer.  Please contact your system administrator.
  The "Run" option is missing from the start menu.
  The option "Log off."... ' is missing from the Start Menu.

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, because there is no Group Policy Editor in XP Home and that really doesn't tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the Task Manager, the registry, System Restore and command prompt Editor, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  For the benefit of Microsoft technical support engineers, here are some ideas offered in the past which does NOT help with this issue:

  Safe Mode boot
  Last good known Configuration startup
  A clean boot
  Sfc/scannow in running (or trying to run)

• G4-1180BR: how to disable keys action but keep shortcuts to volume

  I don't need the other functions of the Action keys (like the increase and decrease in brightness), but I use the volume up, down, turn off the sound and wireless means a lot. So I want to know if there is a software or another solution that I can use to keep these functions work, but do F1 to F8 works as expected (reload the page with F5 and others).

  Hi there @PauloVinicius,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you want to disable the action keys. I'll be happy to help you.

  It is not passing disable action keys and keep the sound. If you disable the action keys it turn off including the volume.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

   

• Video track snaps to the 1 second increments on the timeline

  I had a video and a separate audio track synchronized in a sequence, then drag a video clip of 'camera 2' (from GoPro to 29.97 FPS) to the timeline. To align the video with audio, I need to adjust the starting point and drag it to the right for accurate lip sync point. However, this video clip only stripes and moves in increments of one second, even if the snap is disabled. How can I do align on the accuracy of 30 images of the clamp per second instead of snapping to the 1-second?

  The timeline value frames (it is about to Audio Units) and try again.

  BTW why your timeline has a red line on it. Don't you have material MPE.

• How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

  How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

  I use JDeveloper 12.1.2.0.0

  < af:button id = "tt_b2".

  rendered = "#{attrs.nextRendered} '"

  partialSubmit = 'true '.

  action = "#{attrs.backingBean.nextAction} '"

  Text = "next".

  Disabled = "#{attrs.nextDisabled}" / >

  private static final String NEXT_NAVIGATION_ACTION = "controllerContext.currentViewPort.taskFlowContext.trainModel.getNext";

  public String nextAction() {}

  If (validate()) {}

  updateModel();

  Return NEXT_NAVIGATION_ACTION;

  }

  Returns a null value.

  }

  Use case is made for model train, which is being implemented based on this blog: http://javacollectibles.blogspot.co.UK/2014/10/ADF-train-template.html

  We define a generic action following in the model, but the action must be called under certain conditions, based on the question of whether all validation controls had been passed on no.

  You can do this in two ways:

  1 returnValue = (String) ADFUtils.invokeEL("#{controllerContext.currentViewPort.taskFlowContext.trainModel.getNext}");

  return returnValue;

  2.

  public String getNextTrainStop() {}

  String nextStopAction = null;

  ControllerContext controllerContext = ControllerContext.getInstance ();

  ViewPortContext currentViewPortCtx = controllerContext.getCurrentViewPort ();

  TaskFlowContext taskFlowCtx = currentViewPortCtx.getTaskFlowContext ();

  TaskFlowTrainModel taskFlowTrainModel = taskFlowCtx.getTaskFlowTrainModel ();

  TaskFlowTrainStopModel currentStop = taskFlowTrainModel.getCurrentStop ();

  Terminus of TaskFlowTrainStopModel = taskFlowTrainModel.getNextStop (currentStop);

  nextStopAction = nextStop.getOutcome ();

  _logger.fine ("train, next stop:"+ nextStopAction ");

  Return nextStopAction;

  }

• First "I can't the video to the timeline" PROBLEM

  Hi everyone, I can't get the video to the timeline, when I try to put it in the timeline panel, I'll see blocked symbol and only I can put sound video, I can't put my video. Help, please.

  It is almost always not having your source/track of timeline targeting "lit.

  

  Those blue boxes to the left of the railway... If it's not blue, but the background color of charcoal, you will not be able to place material on the sequence. If say the target audio source A1 is disabled, well... you can drop the video but the audio is not allowed.

  Neil