Authenticate Anyconnect VPN on Active Directory
Hello
I have a Cisco ASA5520, and that you have configured for authentication to the AD using a win2008 box running the network policy server.
In ASDM I can test the auth and it works.
In ASDM-> Device Management-> AMPS/HTTP, SSH, Telnet, access AAA I can define what auth group that I use for user authentication to activate. When I updated SSH auth using auth group that I created, it works very well... so I know that the authentication works.
Problem is, it doesn't seem to work for a user with annyconnect VPN authentication. I seem not to be able to figure out how to tell the ASA to use my ad auth group and not to the LOCAL group auth to authenticate VPN users.
Any help is greatly appreciated.
Thankx
M
Try this:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808c3c45.shtml
But you are probably landing on the defaultwebvpngroup, then change the authentication to your aaa server group it ldap/ntlm and see if the behavior changes.
By default, the SSL connectivity uses the connection by tunnel-group/DefaultWEBVPNGroup profile. If you do not use this profile/tunnel-group, you must use Group-URL or alias so that he can land on another:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808bd83d.shtml
-Jason
Tags: Cisco Security
Similar Questions
-
SSL VPN - ASA - Active Directory LDAP
Hello
Scenario: ASA 8.0 (3) running SSL VPN for remote users. LDAP also authenticates access and connect to the ASA.
For some reason any (we had a power failure, but the problem may be caused by other reasons as well), I can not connect to the ASA, as my login ID does not work, and remote users get connection error when trying to authenticate via SSL VPN web gui.
I have rebooted the ASA and AD without any change in the situation. This service worked very well before and the problem happened suddenly. No one has all the changes for the configs. Customer do not have a backup configuration. Any suggestion on what would be the best next action to solve this problem? I'm not expert on the Microsoft LDAP configuration, and if anyone knows where I can check in Microsoft windows server 2003 for the possible LDAP problem, that would be greatly appreciated.
Thank you
rdianat
the ldap bind account is just a normal user account. He didn't need even administrative permissions. If you want to use ldap for password changes he needs to password change permissions, but otherwise just a normal user account - make sure it cannot be locked in AD or the password never expires none of this things. you will see the name of the ldap account in the config of the SAA.
LDAP-login-password *.
LDAP-connection-dn *.
-
APEX_LDAP. AUTHENTICATE - using Microsoft Active Directory
Request Express 4.1.1.00.23
Internet Explorer - 8
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
Hi very new at the Apex and try to get the authenticaqtion work against our active directory. I installed an authentication scheme for my application chossing the schema type in the LDAP directory... my settings are the following:
Host: *.
Port: 389
Use SSL: No SSL
Distinguished Name (DN) string: domain\%LDAP_USER%
Just use the distinguished name (DN): Yes
This works perfect, and authenticates the user in active directory. The problem is when I try to do the following in the database that I really want to implement a custom authentication scheme, it just doesn't work.
Begin
IF apex_ldap.authenticate)
p_username = > "testusername",.
p_password = > "testpassword";
p_search_base = > 'domain\%LDAP_USER% ',.
p_host = > ' *',
p_port = > 389) THEN
dbms_output.put_line ('True');
On the other
dbms_output.put_line ('False');
End If;
End;
No matter what I do it always returns false. I created a function based on the same code and created a custom authentication scheme that calls the function but I still have a fake. Not sure why it works one way and not the other. Also really appreciate it if someone could help me get the code above to work or help correct.
I looked through the forum and tried many different research base channels, but nothing seems to work.
Concerning
AshHey Ash,
you could use the built-in LDAP authentication scheme and use authentication according to load the group information in some parts of the application. A scheme of application-level authorization can permit or deny access to the app, based on these values. In the post-auth feature, you should even have access to the elements of connection (P101_USERNAME, P101_PASSWORD) If you need.
You can also base your authentication scheme directly custom DBMS_LDAP, if you want to avoid our API not supported.
Kind regards
Christian -
ISE Admin 1.2 access via Active Directory
Hi Experts,
Nice day!
I want to configure my 1.2 ISE to authenticate (for admin) to active directory. I know it's possible, but our ad is not all groups named for admins.
Is it possible for the ISE 1.2 to configure a local user ID and compare it to the pub for the password of the user ID?
Thanks for your great help.
Niks
Niks,
I just did this. First you must have the external configuration of Active Directory as a data source. Once you do this, click on Administration - Admin Access.
For the Type of authentication to ensure password database is switched and edit your data source Active Directory (or whatever you named it).
Then click Administrators - Admin users. Click Add a user - create an Admin user. Make sure you check the external box and you will notice that the password field is leaving. Fill in the appropriate information and then assign them to a group of Directors.
Once you are done with that you can test the user in you on your ISE session. You will notice that when you try to log back in you will have the choice of the sources of data used to authenticate the user. Change the selection in the Active Directory and enter the AD username/password of the newly created account, you should be good to go.
Make sure that you don't delete or deactivate your original admin account in this process. (Change the password if you want.)
-
Client pix VPN how to authenticate with Active Directory
Hi all, I've just set up my first Client VPN on a Cisco PIX. Everything works very well so that hitting the correct subnet and logon. However, I would like to see how I can get my connection of remote users with there active directory accounts. Right now I use the local connection for the pix for testing purposes. Sounds easy, but I'm missing something
We use:
Cisco Pix 515E version 6.3 (3)
Thank you
Dan
Unfortunately the PIX 6.3.3 version does not support Active Directory authentication. V6.3.3 PIX only supports authentication to the server database, radius, and Ganymede local PIX.
If you want to authenticate to active directory, it is support for PIX v7.x go.
Here are the different types of authentication support for PIX v7.x leave for your reference:
http://www.Cisco.com/en/us/docs/security/ASA/asa70/configuration/guide/AAA.html
Hope that answers your question.
-
Cisco VPN client v5 and integration Active Directory 2008
Hi all
I need to know if I can integrate Single Sign On for my Cisco VPN Client v.5 with my Active Directory which run on windows 2008
THX in advance
No, unfortunately, Single Sign On is only supported on Clientless SSL VPN (WebVPN), not on the IPSec VPN Client AnyConnect VPN Client.
-
Hello
Is it possible to authenticate ACS solution engine v4.2 against 2 or more Active Directory domains by using the generic LDAP configuration? One scenario would be to geographic distribution where 1 area would be for the USA and the other would be an another say country Canada (e.g. US.corp and CA.corp).
Thank you
James
Hi James,
It is possible to configure multiple servers authentication LDAP, one for each area. I can tell you that it is much more efficient configuration and administration viewpoint experience and end-user to use AD as an external database Microsoft if your installation is actually all in the same namespace for example amer.CompanyName.com and canada.companyname.com.
To configuration LDAP multiple databases, go to the external user databases > generic LDAP > create a BITTER called, then do the same for CANADA.
Cordially, Jeremy
-
Is it possible to implement an entitled server that authenticates with active directory?
We are holders of business accounts, and we are trying to establish the right for our customers. Does anyone know if there is a way to put up an entitled server that authenticates with ActiveDirectory?
Portico of MEI supports authentication to Active Directory through LDAP or SAML interface. Feel free to reach out if you want to learn more.
Brett
bkizner (at) maned.com
-
OIM 11 g authenticate on Active Directory
Hello guys,.
I need to authenticate all of my users of IOM on the company Active Directory. All of my users of IOM have the equal to the directory ADC Company Login Login, but authentication is performed locally on OIM. Now, I want to authenticate all my users on Active Directory instead of locally on IOM. How can I achieve this? Do I need to install any other module or OIM is able to delegate the directy of Active Directory authentication? I'm now experimenting with authentication remotely on IOM, so please bear with me. A mini-guide with step-by-step what to do to reach the distance authenitcation on Active directory would be appreciated.
Best regards
CaroleTry below
Go to the Weblogic console:
OIM_DOMAIN > Security > realms > myrealm > suppliers > authentication > configure a new Active Directory authenticator...
Control flag = ENOUGH.Provide the credentials of the AD.
On the user tab:
Username = sAMAccountName attribute (default value is cn)
User name filter = (& (sAMAccountName = %u)(objectclass=user))Details tab:
Spread because of the Exception from the connection: CHECKEDCreate it.
Go to IOM authenticator and make as OPTIONAL control indicator and allow custom authentication should be checked.
Create a group in AD with user name. IOM user must be part of this AD Group.
Now log in IOM by using the credentials of the AD.
Published by: Zaba Nayan on 6 February 2012 09:42
-
Active Directory can authenticate to the APEX development environment
Greetings,
Environment:
Apex Version 4.0.2
Database version: 11.2.0.1
WebLogic 10.3.3
Listener of the apex
Is it possible to use Active Directory to authenticate access to the APEX development environment? I have all the individual applications using Active Directory authentication, but I can't find a way to integrate Active Directory to access the development environment.
Thank you
LarryLarry,
No, you cannot change the way in which the APEX Application Builder authenticates users.
brgds,
Peter-----
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at -
How can I use MS Active Directory to authenticate a PIX?
I currently have a race PIX515 6.3 and I have created user manuals from via PPTP (VPDN) to my protected network (administrative nightmare). Is it possible that I can use MS Active Directory database user and have the PIX refer to him for authentication? Or do I need to Cisco's ACS software to accomplish this?
Here you go
concerning
John
-
WLC 5508 Active Directory / LDAP integration to authenticate
Hello
I am redundant deployment WLC 5508 with 4 VLANS and 4 SSID matches it, everything works fine, now I have to do the below, then please put your valuable comments and advice.
1. I need all users authenticated with existing Active Directory/LDAP wireless
2. I create accounts invited in my ad and go to the guests, so comments should only Internet access except the company's resources
2. How can I get my VoIP VLAN for wireless phones. I want to only wireless phones to connect to VLANS voice. No internet access on VLan VoIP
Concerning
Dinesh
Hello
1. I need all users authenticated with existing Active Directory/LDAP wireless
2. I create accounts invited in my ad and go to the guests, so comments should only Internet access except the company's resources
YEARS 1 & 2 - the link below provides the example config and also the memorandum of understanding on the conditions depth, please go through the link atleast once...
http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a0080a03e09.shtml
2. How can I get my VoIP VLAN for wireless phones. I want to only wireless phones to connect to VLANS voice. No internet access on VLan VoIP
YEARS - you can configure the auth required for WLAN voice and then NAT this interface VLAN so that he won't get out of the internet!
Let me know if that answers your question and please do not forget to rate traore useful messages!
Concerning
Surendra
-
AnyConnect VPN client authentication using certificates
Guys, I'm trying to configure my ASA5505 to authenticate the AnyConnect VPN clients using certificates. I have 'Certificates' defined as my method of authentication in my AnyConnect connection profile (see screenshot), but I get 'Certificate Validation failure' whenever I try to connect. The certificate I want to use is a computer issued by my CA certificate company root (Windows Server 2008 running Active Directory Certificate Services). Screenshot of certificate is attached. I added the root certificate on the SAA, and I tried all kinds of combinations by using the corresponding certificate in the AnyConnect Client profile. Each attempt failed, and I'm having no luck finding documentation on how to proceed. Any help would be greatly appreciated!
Hello Shaun,
The problem you're describing, not be able to authenticate through certificate through Microsoft Internet Explorer, is the fact that the certificate is in the computer store. You do not want to confirm with Microsoft, but, I understand that only Microsoft Internet users explore the user store, this certificate is not available to attend the ASA via the Internet browser.
-Craig
-
Phones AnyConnect VPN cannot connect to network ASA high-speed AT &; T uverse
Phones AnyConnect VPN are configured to connect to the ASA 5510 running 8.4 (4), and it uses the Active Directory credentials to connect. The connection is successful external ISP systems including Comcast and smaller independent service providers. However, when all of us at the AT & T uverse service take this phone 7965 even at home it networks fails to make any connection to the ASA at all. A capture of packets on the ASA shows no activity connection to the IP address of our uverse.
What's more, is that we can successfully authenticate the VPN of the phone when using the local account credentials (e.g. username admin password * priv 15) that are entered on the SAA. AT & T said that they are not blocking the ports. It is the confusion that this works for users to access local connection, but not with A/D.
So I guess the question is: what is the first handshake TCP/UDP composed when a Cisco IP phone links AnyConnect SSL to an ASA and negotiates the authentication of the number of A/D? For example, what are the port numbers used in this handshake? I couldn't find all the diagrams illustrating the HRT and the RFC for DTLS do not seem to have the answer either.
Thanks in advance.
-Athonia
Note: we have a TAC case open currently with subject ASA 5510 VPN Edition w / 250 annyconnect user - SSL VPN for phones. Configuration
I too ran on this issue and here is a description of what I found.
If you use automatic network detection first trys phone ping the TFTP server, he has learned from the DHCP server or manually set with the parameter of the alternate TFTP server. If the TFTP server is accessible the VPN will not connect and will not allow the user to connect manually.
ATT Uverse use DHCP option 150, the same option as Cisco UC uses to automatically set the TFTP servers, to locate the local home gateway so that the STB can join him. For this reason, you should notice that when you have a VPN phone on the network and view network settings the IP address of the TFTP server is the IP address of your default gatewat (The ATT router).
Because of the automatic detection of network works in ping the TFTP server that the phone will always think that it is connected to the local network. The workaround is to manually set the TFTP server on the phone * to the IP address that the TFTP server would have been if she had leared it from the DHCP server on your corporate network. The reason you should do this instead of just using a Bogon address, is that once the VPN is connected it tryes to register to the address that you specified.
Please let me know if this solves your problem as it did in our case.
* If you do not know how to set the TFTP replacement setting you must first select the "replacement" TFTP protocol and press on * #. This will allow you to change the default no to Yes. The below named parameter TFTP Server 1 will then allow you to manually specify the address.
-
ASA Anyconnect VPN do not work or download the VPN client
I have a Cisco ASA 5505 that I try to configure anyconnect VPN and thought, I've changed my setup several times but trying to access my static public IP address of the external IP address to download the image, I am not able to. Also when I do a package tracer I see he has been ignored through the acl when the packets from side to the ASA via port 443, it drops because of the ACL. My DMZ so will he look like something trying to access the ASA via the VPN's going to port 443. Here is my config
XXXX # sh run
: Saved
:
ASA Version 8.4 (3)
!
hostname XXXX
search for domain name
activate pFTzVNrKdD9x5rhT encrypted password
zPBAmb8krxlXh.CH encrypted passwd
names of
!
interface Ethernet0/0
Outside-interface description
switchport access vlan 20
!
interface Ethernet0/1
Uplink DMZ description
switchport access vlan 30
!
interface Ethernet0/2
switchport access vlan 10
!
interface Ethernet0/3
switchport access vlan 10
!
interface Ethernet0/4
Ganymede + ID description
switchport access vlan 10
switchport monitor Ethernet0/0
!
interface Ethernet0/5
switchport access vlan 10
!
interface Ethernet0/6
switchport access vlan 10
!
interface Ethernet0/7
Description Wireless_AP_Loft
switchport access vlan 10
!
interface Vlan10
nameif inside
security-level 100
IP 192.168.10.1 255.255.255.0
!
interface Vlan20
nameif outside
security-level 0
IP address x.x.x.249 255.255.255.248
!
Vlan30 interface
no interface before Vlan10
nameif dmz
security-level 50
IP 172.16.30.1 255.255.255.0
!
boot system Disk0: / asa843 - k8.bin
passive FTP mode
DNS lookup field inside
DNS domain-lookup outside
DNS domain-lookup dmz
DNS server-group DefaultDNS
Name-Server 8.8.8.8
Server name 8.8.4.4
search for domain name
network obj_any1 object
subnet 0.0.0.0 0.0.0.0
network of the Webserver_DMZ object
Home 172.16.30.8
network of the Mailserver_DMZ object
Home 172.16.30.7
the object DMZ network
172.16.30.0 subnet 255.255.255.0
network of the FTPserver_DMZ object
Home 172.16.30.9
network of the Public-IP-subnet object
subnet x.x.x.248 255.255.255.248
network of the FTPserver object
Home 172.16.30.8
network of the object inside
192.168.10.0 subnet 255.255.255.0
network of the VPN_SSL object
10.101.4.0 subnet 255.255.255.0
outside_in list extended access permit tcp any newspaper object Mailserver_DMZ eq www
outside_in list extended access permit tcp any newspaper EQ 587 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper SMTP object Mailserver_DMZ eq
outside_in list extended access permit tcp any newspaper of the Mailserver_DMZ eq pop3 object
outside_in list extended access permit tcp any newspaper EQ 2525 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper of the Mailserver_DMZ eq imap4 object
outside_in list extended access permit tcp any newspaper EQ 465 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper EQ 993 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper EQ 995 object Mailserver_DMZ
outside_in list extended access permit tcp any newspaper EQ 5901 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper Mailserver_DMZ eq https object
Note access list ACL for VPN Tunnel from Split vpn_SplitTunnel
vpn_SplitTunnel list standard access allowed 192.168.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer to 8192
logging trap warnings
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
local pool VPN_SSL 10.101.4.1 - 10.101.4.4 255.255.255.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 647.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source inside inside static destination VPN_SSL VPN_SSL
NAT (exterior, Interior) static source VPN_SSL VPN_SSL
!
network obj_any1 object
NAT static interface (indoor, outdoor)
network of the Webserver_DMZ object
NAT (dmz, outside) static x.x.x.250
network of the Mailserver_DMZ object
NAT (dmz, outside) static x.x.x.. 251
the object DMZ network
NAT (dmz, outside) static interface
Access-group outside_in in external interface
Route outside 0.0.0.0 0.0.0.0 x.x.x.254 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol Ganymede HNIC +.
AAA-server host 192.168.10.2 HNIC (inside)
Timeout 60
key *.
identity of the user by default-domain LOCAL
Console HTTP authentication AAA HNIC
AAA console HNIC ssh authentication
Console AAA authentication telnet HNIC
AAA authentication secure-http-client
http 192.168.10.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ca trustpoint localtrust
registration auto
Configure CRL
Crypto ca trustpoint VPN_Articulate2day
registration auto
name of the object CN = vpn.articulate2day.com
sslvpnkey key pair
Configure CRL
Telnet 192.168.10.0 255.255.255.0 inside
Telnet timeout 30
SSH 192.168.10.0 255.255.255.0 inside
SSH timeout 15
SSH version 2
Console timeout 0
No vpn-addr-assign aaaDHCP-client update dns
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd outside auto_config
!
dhcpd address 192.168.10.100 - 192.168.10.150 inside
dhcpd allow inside
!
dhcpd address dmz 172.16.30.20 - 172.16.30.23
dhcpd enable dmz
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
authenticate the NTP
NTP server 192.168.10.2
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-linux-64-3.1.06079-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
internal VPN_SSL group policy
VPN_SSL group policy attributes
value of server DNS 8.8.8.8
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpn_SplitTunnel
the address value VPN_SSL pools
WebVPN
activate AnyConnect ssl dtls
AnyConnect Dungeon-Installer installed
AnyConnect ssl keepalive 15
AnyConnect ssl deflate compression
AnyConnect ask enable
ronmitch50 spn1SehCw8TvCzu7 encrypted password username
username ronmitch50 attributes
type of remote access service
type tunnel-group VPN_SSL_Clients remote access
attributes global-tunnel-group VPN_SSL_Clients
address VPN_SSL pool
Group Policy - by default-VPN_SSL
tunnel-group VPN_SSL_Clients webvpn-attributes
enable VPNSSL_GNS3 group-alias
type tunnel-group VPN_SSL remote access
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect esmtp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: endXXXX #.
You do not have this configuration:
object network DMZ nat (dmz,outside) static interface
Try and take (or delete):
object network DMZ nat (dmz,outside) dynamic interface
Maybe you are looking for
-
Before this upgrade, it was easy to send a message or call your Favorites Apple Watch. Now, I can't find any
-
I just got my new computer a week. I did not now, McAfee has been installed to work. Since I've had a full year of Norton Internet Security, I downloaded and installed. The day of the installation, while the screen was not idle, he locked the deskto
-
How to disable Wi - Fi on my Satellite C870-156?
I need to turn off Wi - Fi to get rid of the noise on audio recordings and preserve the battery.My laptop isn't C870-156 ser no 6C168249R. FN/F12 has transmitter icon but doesn't seem to work.Can someone please help?
-
Vuezone base station is no longer connecting
I have a Vuezone system with 11 cameras which worked well and, without apparent reason, obtained base station offline a couple of days and since then not connecting no more. I have ran all troubleshooting, checked my router, IP of the base station is
-
user of the encrypted files has been deleted or renamed
One of my friends has deleted my user account on my computer. I have encrypted EFS files and don't know how to decipher them. I use xp pro service pak2. No I don't kill him for it. I have read on the MMC and found a certificate with my old username o