Disc 6 of 6 of restore disks will not be read. Stuck between the 5 and 6. How do I? HP Pavilion with XP did not come with disks.

Similar Questions

• None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine, but of course, this should work if you think you need.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues

• Windows Media Player will not come

  Windows Media Player will not come

  Windows Media Player will not come

  In the Find box type copy paste the following command and press the Enter key.

  "%programfiles%\Windows media player\wmplayer.exe".

  If the above doesn't help, try a system restore - select any restore point when it did not have this problem.

• My IPad will not come

  MY IPAD WILL NOT COME BECAUSE I MADE THE UPDATE YESTERDAY?

  If you are sure that the appliance is loaded, then press and hold the home and sleep/wake buttons until you see the Apple logo and then release. It could take up to 30 seconds of operation.

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• IE8 will not come to the top. I get diagnose problems when router connection bed Excellent 54 Mbps

  Internet Explorer will not come to the top.  My router says I 54mpbs Exellent, but I can't go on the internet.  Diagnose the problem button appears.  When I run it, it says that my router is not working.  I have wifi and my friend has the router and its connection is good.  I also have a propellant that works great too.

  Can you get far enough in IE to access the Tools Menu?  If so try clicking Tools | Internet Options | Advanced and clicking the reset button.

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• I updated adobe and now windows vista will not come to the top!

  I was doing something that requires adobe 9 or higher, so I updated to 10. Now my main screen will not come to the top. I can't do all the suggestions for troubleshooting because I can't get to my computer at all.  I validated and it says windows Pascal more send activationsetc. and I can't update because I can't.

  Try to start in safe mode (press F8 immediately and repeatedly after Power Up Self Test and before Windows starts) and uninstall Adobe Reader X.  Then try to restart normally.

• Color Laserjet CP5525 will not come on loan

  Printer will not loan and the error log has 49.2F. E3. From what I could find, this is a firmware error. But how I've updated the firmware if the printer will not come on loan?

  Ended up be the firmware. I had to replace the format because that I couldn't get a ready status to update the firmware. Printer works fine. Thank you

• My Dell is power saving mode and will not come out

  My Dell is power saving mode and will not come out? Any suggestions? I can't get anything else than a screen that says it is in power save mode and press a key or move the mouse. No one who does nothing. Don't disconnect.

  Hi Ma32206,

  Monitors Dell will automatically mode energy saving after a predetermined time amount when the computer is idle. The Dell monitor will go completely black, rather than display a screen saver. This allows your monitor to essentially turn off until it takes again.

  A. Press any key on the keyboard or move the mouse. Either will automatically turn off the power saving mode. Alternatively, you can press the power button on your Dell computer tower or laptop.

  B. press one button a second time if the monitor goes power saving in standby mode. Standby mode allows the screen saver appears.

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Security Windows will not come to the top

  lost all my programs, firewall windows, I click on the setting change a white csreen rises then real quick stop... click on Security Center, c:\windows]system32\run1132.exe comes upand said parameter is in good... lost my windows live sign on... my norton will not come up... i think I may have been hack in to

  lost all my programs, firewall windows, I click on the setting change a white csreen rises then real quick stop... click on Security Center, c:\windows]system32\run1132.exe comes upand said parameter is in good... lost my windows live sign on... my norton will not come up... i think I may have been hack in to

  It seems that your system has been infected:

  Preform Malwarebyte s scanning:

  http://www.Malwarebytes.org/ recommended

  then the use of scan of preform

  a-squared Emergency USB Stick files http://www.emsisoft.com/en/software/download/

  After that, make sure that your system is free of viruses:

  http://www.Avira.com/en/download/index.php

  If you can not install anti virus Software, then try to scan online

  http://housecall.trendmicro.com/UK/

  and spyware:

  http://www.systweak.com/AntiSpyware/

  http://www.SurfRight.nl/en/downloads/ recommended

• Interface 1130ag WLAN AP will not come to the top?

  Hi all

  For the first time, I installed a 1130ag and I can't bring up the interface without wire/radio?

  I have connected it via http at the moment and have tried to activate the radio via the GUI, but it does not come to the top? (This is normally upward in this way with the year 1200)

  Can anyone suggest anything?

  Thank you very much

  Nathan.

  UK.

  Have you defined a SSID? If you have not the radio will not come to the top.

• Dell 1230c do not - print jobs go to the queue printing but will not come to buffer

  Dell 1230c do not - print jobs go to the queue printing but will not come to buffer

  Hey Joe,

  Try duration to remove print jobs to remove Job feel stuck in the queue, and then restart your computer.

  Also refer to:

  Cancel printing

  Maybe you have that impression break.

  View, pause, or cancel printing

  You can also see the troubleshooting steps in Dell for Dell printers.

  Please post back with the State of the question.

• Variables will not come through mailer

  I have a php mailer on my site mortgagemaestro.net and variables will not come through when I send the form to any computer but mine. I just get a blank form in my email.
  Here are the two codes
  
  Thanks for any help
  
  Stop();
  
  var b1Load:LoadVars = new LoadVars();
  var receiveLoad: LoadVars = new LoadVars();
  
  This.B1.onRelease = function() {}
  If (theEmail.text == null | theEmail.text == "" | ") theName.text == null | theName.text == "" | " homePhone.text == null | HomePhone.text =="") {}
  gotoAndStop ("error");
  } else {}
  b1Load.theName = theName.text;
  b1Load.homePhone = homePhone.text;
  b1Load.workPhone = workPhone.text;
  b1Load.theEmail = theEmail.text;
  b1Load.theAddress = theAddress.text;
  b1Load.theCity = theCity.text;
  b1Load.TheState = theState.text;
  b1Load.theZip = theZip.text;
  b1Load.theCall = theCall.text;
  b1Load.sendAndLoad (" http://www.mortgagemaestro.net/lib/phpmailer/email.php", receiveload);
  getURL (" http://l-h1.com/richard_white_lending/destpage/thankyou.php", "_self");
  }
  
  <? PHP
  require ("Class.PHPMailer.php");
  
  $mail = new PHPMailer();
  
  $mail-> IsSMTP(); send via SMTP
  $mail-> host = "mail.mortgagemaestro.net"; SMTP servers
  $mail-> SMTPAuth = true; enable SMTP authentication
  $mail-> Username = "[email protected]"; SMTP Username
  $mail-> password = "32bf1a3"; SMTP password
  
  $mail-> from = '[email protected] ';
  $mail-> FromName = "drive";
  $mail-> AddAddress ("[email protected]");
  
  $mail-> object = "Mortgage Maestro lead";
  $mail-> body = "name:"; "
  $mail-> body. = $_POST [theName];
  $mail-> body. = "\nEmail: «;»»
  $mail-> body. = $_POST [theEmail];
  $mail-> body. = ' \nHomePhone: '; "
  $mail-> body. = $_POST [homePhone];
  $mail-> body. = ' \nWorkPhone: '; "
  $mail-> body. = $_POST [as workPhone];
  $mail-> body. = "\nAddress: «;»»
  $mail-> body. = $_POST [theAddress];
  $mail-> body. = ' \nCity: '; "
  $mail-> body. = $_POST [theCity];
  $mail-> body. = "\nState: «;»»
  $mail-> body. = $_POST [the State];
  $mail-> body. = ' \nZip: '; "
  $mail-> body. = $_POST [theZip];
  $mail-> body. = ' \nCall: '; "
  $mail-> body. = $_POST [theCall];
  
  If (! $mail-> Send())
  {
  echo "Message was sent not < p > ';
  echo "Mailer error:". "." $mail-> ErrorInfo;
  "exit";
  }
  
  echo "Message was sent;"
  
  ? >

  OK, here it is incase anyone ever have this problem. I changed all the instance names as theCall and theName to variables. For this change in the area titled var: sort of in the lower right corner of the properties. I also changed the shape of the POST method and made my form a clip called sendWork

  Well here are the scripts.
  I'm still having a problem with my if statements. They stopped working after I changed everything to variables. He would still put me to the error screen that I put in place even when I had all of the information entered.

  I know it's because they are implemented by using the instance names (see above the script), but when I say that everything will work smooth, if all goes well

  Stop();

  This.B1.onRelease = function() {}
  sendWork.loadVariables ("email.php", "POST");
  getURL (" http://l-h1.com/richard_white_lending/destpage/thankyou.php", "_self");
  };

  <>
  require ("Class.PHPMailer.php");

  $mail = new PHPMailer();

  $mail-> IsSMTP(); send via SMTP
  $mail-> host = "mail.mortgagemaestro.net"; SMTP servers
  $mail-> SMTPAuth = true; enable SMTP authentication
  $mail-> Username = "[email protected]"; SMTP Username
  $mail-> password = "32bf1a3"; SMTP password

  $mail-> from = '[email protected] ';
  $mail-> FromName = "drive";
  $mail-> AddAddress ("[email protected]");

  $mail-> subject = "Mortgage Maestro lead";
  $mail-> body = "name:"; "
  $mail-> body. = $_POST [theName];
  $mail-> body. = "\nEmail: «;»»
  $mail-> body. = $_POST [theEmail];
  $mail-> body. = ' \nHomePhone: '; "
  $mail-> body. = $_POST [homePhone];
  $mail-> body. = $_POST [homePhone02];
  $mail-> body. = $_POST [homePhone03];
  $mail-> body. = ' \nWorkPhone: '; "
  $mail-> body. = $_POST [as workPhone];
  $mail-> body. = $_POST [workPhone02];
  $mail-> body. = $_POST [workPhone03];
  $mail-> body. = "\nAddress: «;»»
  $mail-> body. = $_POST [theAddress];
  $mail-> body. = ' \nCity: '; "
  $mail-> body. = $_POST [theCity];
  $mail-> body. = "\nState: «;»»
  $mail-> body. = $_POST [the State];
  $mail-> body. = ' \nZip: '; "
  $mail-> body. = $_POST [theZip];
  $mail-> body. = ' \nCall: '; "
  $mail-> body. = $_POST [theCall];

  if(!$mail->Send())
  {
  echo "Message has not been sent.

  ";
  echo "Mailer error:". "." $mail-> ErrorInfo;
  "exit";
  }

• Windows Explorer says he has stopped working and it does not restart. I tried the system restore, but will not return to explore

  I can't get rid of this pop up asking to restart or online solutions. I chose these two options in the last days and even managed to get into the restoration of the system (not easy without windows), but nothing works and I'm about to throw this pop up window with my laptop.

  '

  Hello

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• Restored Vista will not install updates

  I have an old laptop (from 2008 or 2009 I think) with Windows Vista. A few weeks ago, I restored the computer to see if it would be a bit faster still.

  But after restoring I have big problems with the installation of programs. I was able to install Firefox and antivirus (Avast) with no problems, but other programs - such as versions updates to Adobe Reader and Flash player and Libreoffice - will not be installed at all. I can download files facility but when clicking on it nothing happens. I checked the Task Manager, so they are not running in the background.

  I also face similar problems with Windows update. It is stuck on the installation of Vista SP1. It is said that the installation can take a large amount of time and it may restart the computer several times, but what installation it goes very fast (without rebooting) and said that the installation is complete. But when you search for new updates of SP1 is still there and not installed.

  Hello

  Many programs will not install unless you have SP2, as part of their minimum requirements for install.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.