I updated adobe and now windows vista will not come to the top!
I was doing something that requires adobe 9 or higher, so I updated to 10. Now my main screen will not come to the top. I can't do all the suggestions for troubleshooting because I can't get to my computer at all. I validated and it says windows Pascal more send activationsetc. and I can't update because I can't.
Try to start in safe mode (press F8 immediately and repeatedly after Power Up Self Test and before Windows starts) and uninstall Adobe Reader X. Then try to restart normally.
Tags: Windows
Similar Questions
-
Upgrade of hardware and now Windows vista will not be loaded. Stop 0x0000007B error.
Can someone help me please. I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b. I tried the two loading normally and safe mode and I get the same thing.
Can someone help me please. I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b. I tried the two loading normally and safe mode and I get the same thing.
Hey Brian39
If you change the motherboard that you normally have to reinstall vista
your hard drive if you ever reinstalled vista contains the drivers for the old motherboard etc.
and if vista is pre-installed you can not put the motherboard unless you do so in collaboration with the computer manufacturer
If a retail license, you can change the motherboard
but you will normally always reinstall vista for reasons
Walter, the time zone traveller
-
My computer turns off during an update to windows xp and now windows xp will not load.
My computer turns off during an update to windows xp and now windows xp will not load. It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options. I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive. I have the product key, but I don't know where or how repair the operating system.
Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.
-
Internet Explorer will not come to the top. My router says I 54mpbs Exellent, but I can't go on the internet. Diagnose the problem button appears. When I run it, it says that my router is not working. I have wifi and my friend has the router and its connection is good. I also have a propellant that works great too.
Can you get far enough in IE to access the Tools Menu? If so try clicking Tools | Internet Options | Advanced and clicking the reset button.
-B-
http://www.officeforlawyers.com | http://www.OneNote-tips.com
Author: Guide to counsel for Microsoft Outlook -
Interface 1130ag WLAN AP will not come to the top?
Hi all
For the first time, I installed a 1130ag and I can't bring up the interface without wire/radio?
I have connected it via http at the moment and have tried to activate the radio via the GUI, but it does not come to the top? (This is normally upward in this way with the year 1200)
Can anyone suggest anything?
Thank you very much
Nathan.
UK.
Have you defined a SSID? If you have not the radio will not come to the top.
-
Old laptop will not come to the top. To get the files and documents for the new laptop
My laptop with Windows Vista will come is no longer. It is just sitting there waiting and waiting. I just got a new laptop with Windows 7. I can't all files and documents, etc. from the old laptop and put it on my new laptop? Can I do this using a USB Flash drive? Thank you
Saturday, January 22, 2011 18:39:30 + 0000, ashevilletom wrote:
My laptop with Windows Vista will come is no longer. It is just sitting there waiting and waiting. I just got a new laptop with Windows 7. I can't all files and documents, etc. from the old laptop and put it on my new laptop?
I do not know. The answer depends on what's wrong with the old.
Can I do this using a USB Flash drive?
# If you can not start the old laptop, you cannot transfer files from it
to the USB.If the problem with the old laptop isn't that hard drive has
has failed (and that's a big 'if'), you can pull the hard drive.
and get an external USB enclosure. Having done this, you can read
It is on the new laptop and copy files from it.Ken Blake (MS-MVP)
-
Security Windows will not come to the top
lost all my programs, firewall windows, I click on the setting change a white csreen rises then real quick stop... click on Security Center, c:\windows]system32\run1132.exe comes upand said parameter is in good... lost my windows live sign on... my norton will not come up... i think I may have been hack in to
lost all my programs, firewall windows, I click on the setting change a white csreen rises then real quick stop... click on Security Center, c:\windows]system32\run1132.exe comes upand said parameter is in good... lost my windows live sign on... my norton will not come up... i think I may have been hack in to
It seems that your system has been infected:
Preform Malwarebyte s scanning:
http://www.Malwarebytes.org/ recommended
then the use of scan of preform
a-squared Emergency USB Stick files http://www.emsisoft.com/en/software/download/
After that, make sure that your system is free of viruses:
http://www.Avira.com/en/download/index.php
If you can not install anti virus Software, then try to scan online
http://housecall.trendmicro.com/UK/
and spyware:
http://www.systweak.com/AntiSpyware/
http://www.SurfRight.nl/en/downloads/ recommended
-
Installed a new hard drive and now Windows XP will not activate.
Resettlement on new disc
Hey there-
I bought a new SSD, had it installed and installed Windows XP by using a Setup disk I had laying around. He wants to be activated (even if the original installation is always on the computer, but on the 'slave', non-Boot drive). When I try to use the activation code that was on the original hard disk, it will not work. On the last 10-15 years, of which several were recovered for parts, I bought at least a half dozen computers with Windows XP (i.e., I have many more devices running Windows XP licenses). I tried to enter codes Activation of certain decisions which have been taken down, and I can't at work either one of them. I tried to use dial-in Activation (by entering the installation of 54-digit ID), with no luck as well. Is it possible to get it work?
Thank you
The fSomething to try...
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person. -
Windows Vista will not start after the automatic installation of the patch Ms.
My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows. All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point. This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States. Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge. I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.
Follow these steps to try to solve your problems of boot.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Windows Vista will not go past the loading screen
Hey - last night my computer was working fine, I had nothing to open and was watching television, then we had a power cut, I thought everything was fine. But when I went to turn my computer on this morning he gets just stuck at the loading screen (the one with the green bars). I have tried reboot, unplug the unit and system repair, the windows vista startup disk, just. When I put in the disc, it does something together press button as I do, then it loads the files then goes back right screen loading with green bars, he done the same for any route I'm trying. I could use the help because the computer has very important files that I can't afford to lose.
Thank youTry and back up your data:
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
Good luck with it.
Cheer.
Mick Murphy - Microsoft partner
-
Hi all
My hard drive died so I put a new in and installed Windows on a drive, but when I have just activated and put my product key does not work. In fact, I get this day by putting in and then it says character not aloud.
Please can someone help? All I've done is put a new hard drive in but guess that Windows detects that the product key has been used on the old, which explains why it won't work on the new. What should I do to activate the key?
Thank you
Richard
Thanks a lot for your useful replies. I've got in contact with Microsoft and they gave me a key and it worked!
Thank you
Richard
-
Why can't I play the games on Yahoo Games? Game will not come to the top.
Whenever I try to play a game like dominoes or canasta on Yahoo games, I go so far as to choose a group to play then the connection never ends. I went through all the steps in the help of Yahoo, with no improvement. I uninstalled and reinstalled flash player and it did not help. I have connected to my system of work from my home machine, and I'm able to go right into. I can go in my former office on Vista with no problems. Both of my computers are Wi - Fi, but my office is at the same time.
Hi EdieKnight,
· What happen when you try to play the games?
· You receive an error message/code?
· What web browser do you use?
· You play games online?
I suggest you to update flash and java and check if it helps.
http://get.Adobe.com/flashplayer/
http://Java.com/en/download/index.jsp
For reference:
Troubleshooting for Yahoo! Games issues: ensuring that JavaScript is enabled and updated
http://help.Yahoo.com/l/us/Yahoo/Games/Troubleshooting/browser-07.html
Troubleshooting for problems of Yahoo! Games: Flash Player update
http://help.Yahoo.com/l/us/Yahoo/Games/Troubleshooting/browser-06.html
You also contact Yahoo support for more help and information.
http://help.Yahoo.com/l/us/Yahoo/helpcentral/
Reply back with more information.
-
Static L2L Tunnel - will not come to the top
Hi all
Currently have a very big problem with a site that I can't go there for the moment.
We have one HUB ASA5505 SEC + a few other ASA connected via VPN L2L. We have static L2L 1 active, 1 dynamic L2L Active, and I am currently trying to add a second static Tunnel L2L.
I checked that each WAN Interface can ping each other, and both devices have full internet connectivity. There is no double nat or being content filtering. I noticed that my Client remote access VPN Cisco will not properly connect through the ASA despite full internet connectivity, but when I connect directly to a modem, I was able to connect properly. So apparently the ISP isn't blocking IPSEC traffic as far as I KNOW.
Static2 uses currently a temporary license of TAC since our license is currently waiting for arrival, but a release of version see the watch all VPN/3des features are enabled.
Here are the configs:
ASA5505-HUB hostname
domain xxxxxxx.local
activate the password xxxxxxxxxxx
names of
name 192.168.9.50 xxxxxxxxx
name 192.168.9.51 xxxxxxxxx xxxxxxxxxx description
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.9.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address xxxxxxxxxxxxx 255.255.255.248
!
interface Vlan3
nameif dmz
security-level 50
IP 10.10.9.1 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
switchport access vlan 3
!
interface Ethernet0/5
switchport access vlan 3
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passwd xxxxxxxxxxxx
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS lookup field inside
DNS server-group DefaultDNS
Server name xxxxxxxxxx
Server name xxxxxxxxxxxxxxx
domain xxxxxxxxxxxx.local
permit same-security-traffic intra-interface
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.0.0 255.255.0.0
access-list 101 extended allow icmp a whole
access-list standard split allow 192.168.0.0 255.255.0.0
permit to_static1 to access extended list ip 192.168.0.0 255.255.0.0 192.168.14.0 255.255.255.0
permit to_static2 to access extended list ip 192.168.0.0 255.255.0.0 192.168.16.0 255.255.255.0< this="" is="" the="" problem="">
RTP list extended access udp any permitted any 10000 20000 Beach
RTP list extended access permitted tcp everything any 10000 20000 Beach
pager lines 24
monitor debug logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
mask IP local RA-pool 192.168.99.1 - 192.168.99.126 255.255.255.128
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 75.146.188.94 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
set of 20 SYSTEM_DEFAULT_CRYPTO_MAP crypto dynamic-map transform-set ESP-3DES-SHA
card crypto outside_map 10 correspondence address to_static1
card crypto outside_map 10 peers set xxxxxxxxxx
outside_map crypto 10 card value transform-set ESP-3DES-SHA
card crypto outside_map 11 match address to_static2
card crypto outside_map 11 counterpart set xxxxxxxxxxxxx< problem="">
card crypto outside_map 11 game of transformation-ESP-3DES-SHA
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.0.0 255.255.0.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.9.101 - 192.168.9.199 inside
dhcpd dns 192.168.9.2 xxxxxxxxxxx interface inside
dhcpd xxxxxxxxx.local area inside interface
xxxxxxxx dhcpd option 66 ip inside interface
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
type of policy-card inspect sip default_sip
parameters
Journal of decline in the shares of Max-forwards-validation
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the netbios
inspect the rtsp
inspect the default_sip sip
!
global service-policy global_policy
Group xxxxx-RA internal policy
xxxxx-RA group policy attributes
Server DNS value 192.168.9.2 xxxxxxxxxxxxx
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split
xxxxxxxxx.local value by default-field
allow to NEM
IPSec-attributes tunnel-group DefaultL2LGroup
pre-shared-key *.
type tunnel-group xxxxx-RA remote access
Tunnel-Group global xxxxxx-RA-attributes
address-RA-pool
Group Policy - by default-xxxxx-RA
tunnel-group xxxxxx-ipsec-attributes
pre-shared-key *.
tunnel-group STATIC2_WANIP type ipsec-l2l< problem="">
IPSec-attributes tunnel-group STATIC2_WANIP
pre-shared-key *.
tunnel-group STATIC1_WANIP type ipsec-l2l
IPSec-attributes tunnel-group STATIC1_WANIP
pre-shared-key *.
context of prompt hostnameand...
ASA5505-STATIC2 host name
domain xxxxxxxx.local
activate the password XXXXXX
passwd xxxxxxxxxxx
names of
!
interface Ethernet0/0
switchport access vlan 3
!
interface Ethernet0/1
switchport access vlan 2
!
interface Ethernet0/2
switchport access vlan 2
!
interface Ethernet0/3
switchport access vlan 2
!
interface Ethernet0/4
switchport access vlan 2
!
interface Ethernet0/5
switchport access vlan 2
!
interface Ethernet0/6
switchport access vlan 2
!
interface Ethernet0/7
switchport trunk allowed vlan 1-2
switchport trunk vlan 1 native
switchport mode trunk
!
interface Vlan1
nameif dmz
security-level 50
IP 10.10.0.1 address 255.255.255.0
!
interface Vlan2
nameif inside
security-level 100
192.168.16.1 IP address 255.255.255.0
!
interface Vlan3
nameif outside
security-level 0
IP address xxxxxxxxxxx 255.255.254.0
!
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS lookup field inside
DNS server-group DefaultDNS
Server name xxxxxxxxxx
Server name xxxxxxxxxx
domain xxxxxxxxxx.local
access extensive list ip 192.168.16.0 to_hq allow 255.255.255.0 192.168.0.0 255.
255.0.0
192.168.16.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.
255.0.0
pager lines 24
MTU 1500 dmz
Within 1500 MTU
Outside 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400Route outside 0.0.0.0 0.0.0.0 xxxxxxxxxxx
Global 1 interface (outside)
NAT (dmz) 1 0.0.0.0 0.0.0.0
NAT (inside) 0 access-list sheep
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto cmap1 match 10 address to_hq
card crypto cmap1 10 peers set xxxxxxxxxxxxxx
cmap1 crypto 10 card value transform-set ESP-3DES-SHA
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
No encryption isakmp nat-traversal
Telnet 192.168.0.0 255.255.0.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd dns 192.168.9.2 xxxxxxxxxxxx
!
dhcpd address dmz 10.10.0.100 - 10.10.0.199
dhcpd lease 10800 dmz interface
dhcpd enable dmz
!
dhcpd address 192.168.16.101 - 192.168.16.131 inside
lease interface 10800 dhcpd inside
dhcpd xxxxxxxxxx.local area inside interface
dhcpd ip interface 192.168.9.50 option 66 inside
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
tunnel-group HUB_WANIP type ipsec-l2l
IPSec-attributes tunnel-group HUB_WANIP
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostnameAny help is appreciated
Hello
Seems to me that the ASA named STATIC2-ASA5505 lack some essential associated VPN configurations.
The encryption card is not attached to any interface
Configure this
cmap1 interface card crypto outside
The Crypto ISAKMP is not enabled on any interface
Configure this
crypto ISAKMP allow outside
Hope this helps
-Jouni
-
Delete a file system and now Windows XP will not boot.
Original title: delete the file system
I deleted a file in system 32 hal.dll and cannot start my PCHi bibidennis,
Perform a repair of Windows XP installation to fix the problem.
For instructions, see the following article:
If you have installed Internet Explorer 7 or 8, see the following article for instructions on performing a repair of Windows XP installation:
-
As I upgraded v38, I can receive and delete mail, read mail after right click on the name of box mailboxes to open in a new window (used for the mailbox just left click), but not compose a message, reply or forward. No error messages, but nothing happens when I click on write, answer or next button. I'm on Win7HomePro. That is what it is? Thank you!
OK, I downloaded a new copy and it seems that if I am OK now - at least, the window again message happens again.
Maybe you are looking for
-
How to use the highlighter to text on web pages
I would like to point out some small print on a web page of banking services to the email. Printing is too small and will be interrupted if not highlighted. I installed the text highlight add on on my toolbar, but do not know how to use it.
-
Synchronization with GMAIL "all mail".
I do almost all my email through Thunderbird or K9 (Android)... only connect to GMAIL once a month or two. Today I just found out that my Gmail "all mail" had > 12 000 emails. According to the GMAIL Help Center, this folder is a collection of any shi
-
Original title: Picture It Photo 2002 Recently, I upgraded my RAM to 1 G. Since 2002 the picture it will work, but immediately stop saying that it will inform me if there is a solution to the problem. Everything I read on this site, I think that th
-
How do I optimize the performance of windows 7 with freeware tool or tool?
How do I optimize the performance of windows 7 with freeware tool or tool?
-
Cannot get NavigationDialog to show.
I have this code in a simple app... purpose of HelloCascades the dialog box does not appear. No idea what I'm missing? Thank you. NotificationDialog *notification = new NotificationDialog(this); notification->setTitle("TEST"); notification->setBody