Task Scheduler error-' the selected task "{0}" no longer exist. " To see the current list, click on refresh. »

Similar Questions

• Error message: the selected task "{0}" no longer exists. to view the current task, click Refresh

  When I go to start Task Scheduler, I get this message "the selected task"{0}"no longer exists. to see the current tasks, click Refresh"so I go ahead and click on refresh and get the same error message. How can I solve this problem? Any help and any help would be greatly appreciated. Thank you!

  I spent a few minutes and tracked down the problem and a solution. This is a result of work files that exist in the tasks folders that do not have access to (probably) in the registry. Here's how I worked through the issue - will take time, but it has cleared up the problem completely for me:

  1. Open the Task Scheduler, and then click OK when you are prompted with the error. It may seem that you receive again and again the same error, but it is really because of the number of tasks that are broken. Make a note of the number of times that you are prompted by the error of the selected task '{0} '. This is the number of work files that are out of sync with the registry.
  2. Start with the first folder under Windows tasks (Task Scheduler (Local) \Task Scheduler Library\Microsoft\Windows), and then select each file in turn until you receive the error of the selected task '{0} '. This folder contains files that are not synchronized with the Task Scheduler.
  3. Open Windows Explorer and navigate to the folder of tasks (% SystemFolder%\Tasks\Microsoft\Windows) and look for the folder that corresponds to the folder in which you received the error.
  4. For some tasks, you will be able to determine which files need to be removed by comparing the list in the Task Scheduler with the list of files in the Explorer. Some tasks will be only one file in the Explorer, or, in one case, I had 2 and the first was absent. Once Task Scheduler encounters this error is no longer display the tasks so he does the work to get the two in sync a little harder. Once you have determined which files exist in the folder of files but do not exist in the folder of the Task Scheduler, remove these files.
  5. IMPORTANT - close and re-open the Task Scheduler. Once the error, Task Scheduler no longer displays the missions you have to close and restart in order to continue your effort of synchronization.
  6. Continue to select folders in the Task Scheduler under Windows taskbar until you encounter the error once again and repeat the process of determining which file exists on the file system, but not in the Task Scheduler.

  I had 6 files that were at odds with what was shown in the Task Scheduler. Once I deleted all the incriminated files, task scheduler has pulled up without problem.

  Good luck.

• Do not use the Brink game on my computer laptop-message of error: the current video card/driver does not support openGL3.1 or newer.

  I bought this game for my son who has installed ok. But when pressed on play error message: the current video card/driver does not support openGL3.1 or newer.

  We have Windows Vista SP2. Does this mean I now have to buy a video card or y at - there a way around this without costing me more money?
  Kind regards
  Sam Towle

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1: make sure the game is compatible with your computer.

  Method 2: update the video card driver and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  If both methods fail, you will then need to get a new video card.

  I hope that helps!

• Windows 7 Task Scheduler error: the system cannot find the specified file.

  Here is information when you try to change the properties of a task in the Task Scheduler:

  FX: {c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4}

  The system cannot find the specified file. (Exception from HRESULT: 0 x 80070002)

  Type of exception: System.IO.FileNotFoundException

  at Microsoft.Windows.ManagementUI.CombinedControls.INetwork.GetName)

  to Microsoft.Windows.ManagementUI.CombinedControls.UINetwork.GetUINetwork (network INetwork)

  at Microsoft.Windows.ManagementUI.CombinedControls.NetworkListManager.GetNetworkList)

  at Microsoft.Windows.ManagementUI.CombinedControls.ControlTaskConditions.PopulateNetworkComboBox)

  at Microsoft.Windows.ManagementUI.CombinedControls.ControlTaskConditions.InitializeConditions)

  at Microsoft.Windows.ManagementUI.CombinedControls.EditTaskDialog.InitializeView)

  at Microsoft.Windows.ManagementUI.CombinedControls.EditTaskDialog.Initialize (file UITaskFolder, String taskName, String title, UserChoice userAction, BaseResultsControl inOwnerView, String inXmlText)

  at Microsoft.Windows.ManagementUI.CombinedControls.BaseResultsControl.EditTask (UITaskFolder file, String TaskName)

  to System.Windows.Forms.MenuItem.OnClick (ByVal e As EventArgs)

  at System.Windows.Forms.Command.Invoke)

  at System.Windows.Forms.Control.WmCommand (Message & m)

  at System.Windows.Forms.Control.WndProc (Message & m)

  at System.Windows.Forms.ListView.WndProc (Message & m)

  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)

  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• The spacing between the contacts in the contact list and the current list.

  Hello

  My Skype updated this morning and it looks that the spacing between the contacts has been increased and as the spacing between the history of cats in the chat window.

  It of wasting a lot of space and removes the ability to quickly view who is online. You now have to scroll, even when Skype is maximized to quickly view the contacts and history of cats.

  Hoping so it is a way to reduce the spacing?

  Thank you.

  You have the «special» Skype 6.20 64. version.104 installed with the new User Interface. You can uninstall this version and install the 6.20 standard. 0.104 version with the old interface.

  http://download.Skype.com/MSI/SkypeSetup_6.20.0.104.msi

  Versions 'special' .64 are randomly provided to users selected to verify their reaction to the new interface. In my opinion, it's policy very "user hostile". n):

• How to have a DAILY subtotal in the current list

  [(RE: à l'aide deles de numéros de version 3.6.2)]

  Hello

  I have been searching & reading & experimenting until I'm blue in the face. I can't seem to find a way to have a subtotal daily, as shown in the attached screenshot.

  Here is a list of donations that come this organization that I work, and they want to be able to view a drop-down list of income (provided by PayPal) but to see how each day totals to; then, inside, have shown total so far .

  Yes, Paypal has reports & such, but curiously, they do NOT provide a breakdown by 'élément ID' (ie: each donation button has a "item ID" attached to it depending on what page the button is on - tells us what thing should go to). so I'll have to do a dump CSV 'story' every night to sort the CSV by item ID, and then paste in this spreadsheet of numbers I try to create.

  so, the attached screenshot, cell D8 has this formula in there...

  SUMIF (C$ 2: C7, ' <>DAILY-TOTALS ", D$ 2: D7" ")

  .. .which I slipped from Re: sets of numbers in a column numbers 3.1 a subtotal

  but when I copy and paste this entire Row8 Row14 & Row18 etc, there is a TOTAL of all column (less than the line with the text "DAILY TOTALS" in them).

  is it possible to make the SUM of the lines in the same day? or in SHORT all lines since the last "DAILY TOTALS?

  or, is there a way to better/more easy to make this whole process?

  Thank you :-)

  

  You might consider having a table of gifts and a separate daily summary table, like this:

  

  In column A, indicate you the dates.

  The formula in B2, filled and right at the bottom, is:

  = SUMIF(donations::$A,$a2,donations::D)

  SG

• This browser no longer exists in the location specified in the preview in browser preferences

  I create a new website using Adobe Dreamweaver CC 2014. I tried to preview in Chrome and I got an error message saying: "this browser no longer exists in the location specified in the preview in browser preferences." It presents a fine Preview in Internet Explorer. I'm using Chrome as my default, but I personally have not gone and reset anything, so I don't understand why this is happening since I created my latest Dreamweaver site. Any ideas how can I fix?

  Jennifer

  Go to edit the list of browsers.  Find the Chrome program file on your local hard drive.

  Nancy O.

• Items in the list does not appear under the current name?

  Hello
  
  I use the model 12 and by using the vertical sidebar list. When I click on an item in the list that I want to make current and the rest non-current, but when I discovered the source of each of them is still displayed with a class of "t12noncurrent".
  
  That's what my model looks like under the definition of the model:
  
  For "current model list.

  <tr style="padding-bottom: 5px;"><td><a class="t12current" href="#LINK#">#TEXT#</a></td></tr>

  and for "related model list.

  <tr style="padding-bottom: 5px;"><td><a class="t12noncurrent" href="#LINK#">#TEXT#</a></td></tr>

  No idea why its not current selection?

  Hello

  It is not part of the model but the definition of the list itself. Go to select the shared components, lists, your list, and then select a list entry. Here, you should have an input section of the current list with two parameters:

  Current entry list for Pages Type: value "Colon delimited list Page.
  The current list entry for Condition: enter the page number (which should be identical to the Page parameter in the target section)

  Andy

• Unable to set the Alias for the current directory (ACD)

  I am creating an alias of CDA who is also required to define the command ' * DBGOUTFILE *'
  "file" argument
  
  I am running following commands
  
  -& gt; DBGOUTFILE "abc.txt".
  ERROR: The current directory (ORA-36780) Alias is not defined. Cannot complete abc.txt.
  I went ahead and tried to set the ADC using the command
  
  -& gt; CDA ' / slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace'
  ERROR: Slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace (ORA-36784) is a directory name or filename not valid.
  
  In which *'/slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace'* track of directory
  
  No idea how to define CDA (which should be the given alias?)
  
  Thanks in advance for the help
  
  Thank you
  
  Joseph George
  
  
  
  

  Hi Joseph,.

  You must first create a directory.
  SQL > create directory

  as '';
  SQL > grant all the Directory public /;

  Now, you must run the command ADB but make sure that the patch has permission 777 for all folders.

  Thank you
  Brijesh

• Need to set the attribute of the current record based on the value of the next record

  With the help of forms 6, I have a form that displays the list of folders. There may be multiple records with the same ID, but with different expiration dates. I need set attributes for hilite only the record with the latest expiration date. The current list points of interest reviews of future expiration dates - but we found that, sometimes, the subscription is renewed before the expiration date has been reached, causing two records with the same ID with expiry dates in the future.
  
  I can (and do) sort the records by date of expiry and the identification for the record with the latest expiration date is always the last to this ID, so what I want to do is to check the next record to see whether or not it has a different ID. If the current record is the last expiration date, & must be hilited. Because I might want to hilite the current record, I can't simply navigate to another record, according to the description I found, what makes the next_record builtin. Anyone know how I can check for a value in the next record without making the current record?
  
  Thank you.

  What I would do:

  -Create a DB view based on your table and including the function call DRIVE as a separate column.
  -Base that block you on this point of view
  -If the block is modifiable, set the DML target for the block to your database table.

• Task Scheduler error: "an error has occurred for task reminders - portable home. "Error message: the specified account name is not valid.

  HelloW everyone,

  I changed my name to the laptop and now every time I have lunch Planner task, I receive the following error message:

  "An error has occurred for task reminders - portable home. "Error message: the specified account name is not valid.

  I also have the problem with restore points, so these two issues relate to eachother? How can I solve the problem of the user name.

  Any suggestion and help appreciated

  Hello

  You can check out the link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/odd-Scheduler-error-messages/a487d70b-61c9-499F-ae15-ac903d6174eb

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• XP Task Scheduler error: 0x80070005

  Hello

  I can't schedule a task by using the windows Task Scheduler.  I'm admin on the box and also tried with the account admin with password.  I get the same error no matter what task I try to plan.

  Thanks for your help,

  Terrie

  Hi Sabine,.

  ·         Were there an update of Windows installed recently?

  Check to see if the following is useful.

  a. Click Start and run, type gpedit.msc, and then click OK.

  b. expand the following items in the Local computer policy list:

  Computer configuration

  Windows settings

  Security settings

  Local strategies

  c. click the user rights assignment.

  d. double-click on access this computer from the network and then click Add user or group.

  e. Add the new user name or the group name in the enter the object names to select area.

  f. click on check names to verify the entries. Click OK two times.

• "The selected task... no longer exists" for almost all tasks (Win7)

  I opened the Task Scheduler in Windows 7 the other day and received dozens of separate messages, telling me that the tasks no longer existed. This included not only those that I created myself, but also for programs installed and crucial tasks of Windows System. The Scheduler is running and knows the names of tasks, such as confirmed by the command line.

  I looked at the entrance to register TaskCache and it seems that only 4 tasks remain in it - a random selection that includes one of McAfee, two Google Update and Windows Defender. No other tasks that have xml files in the task (C:\Windows\System32\Tasks) folder are listed.

  I read that these errors can be resolved by emptying the jobs directory of all files except those appearing in the registry and then re-import all the. I tried this for a single task that I created myself, and it succeeded. The fact for all tasks would take a very long time, but there is another problem: the Windows themselves tasks do not appear in the registry and I can't move or delete the Windows subdirectory under the task (C:\Windows\System32\Tasks\Microsoft\Windows) folder, even when I start a cmd as administrator session.

  Any suggestions or advice welcome. Thanks in advance.

  Hello

  Thanks for posting your query in Microsoft Community.

  Important: problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  In addition, it seems that you use several security software. Windows Defender is automatically disabled when using any 3rd party security software. Thus, the problem you are having, could be due to a conflict between the 3rd party software.

  Step 1: Therefore, I first suggest you put the computer in a clean boot state and check if the same behaviour arises.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Step 2: Please refer to the suggestions in the help of TechNet support to solve problems in Task Scheduler.

  Troubleshooting Task Scheduler

  Step 3: Run the System File Checker tool

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Press the Windows key + X , and then click prompt (Admin)

  Type the following command and press enter

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Task Scheduler error, 0 x 80041315, Error 1717

  When I try to schedule a task on my computer window xp, the following errors come upward:

  1. Planner > general initialization page failed. The specific error is: 0 x 80041315: the Task Scheduler Service is not running. Year error has occurred trying to retrieve task account information. You can continue to edit the subject of the task, but will not be able to change task account information.

  2. failed to start the service task scheduler on the local computer. Error 1717: The interfaceis is unknown.

  It is common, serious, or can it be fixed?

  Thank you Tim

  Hey, Robert;

  Thanks for the help.

  I finally got things to work. Here's what I did:

  I am going to start, run and then enter: services.msc and press ok

  Who took me to the Services window.

  There, I looked down from the area of the right hand under Services (Local)

  Under the name of category, I found the Background Inte...

  I clicked on the right-

  Press to start,

  has given it a minute to run, then

  Startup type: I entered Automatic,

  Then start again

  Apply and then OK

  I then closed the boxes

  Everything works

  Thanks again for the help

  Tim

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.