Discovery of groups of
If I have 3 bays of PS6210 in a group connected to a cluster of esxi 6 via iscsi, the vmnic learn all ports eth EQ during initial discovery? I know that the group what IP is used for the initial discovery, so I'm looking for the relationship between the host and the EQ NIC after that.
We are considering a direct controlled switch of our switches 1 g 10g switches, but we can not trolling the 10 g to 1 g. All network connections are redundant (the team network cards, etc.). I can give more details on the plan, but it depends on the response on the relationship of the EPF.
Thank you.
Hello
The server never "learns" all physical port IP addresses. PS Series SAN from Dell uses two characteristics required of iSCSI. One is called 'login_redirect' and other disconnected "async".
If you were to follow the connection process, when the server tries to connect to the discovery address fails, a specific error message, and a physical port IP address will be sent to the initiator. Immediately it will then record in this physical port address. When it comes time to balance a session iSCSI to another port, the server receives a request for "async logout" of the table. Forcing them to disconnect and reconnect. When the first process is repeated, and the connection is made on another physical port.
That answer your question?
Kind regards
Don
Tags: Dell Products
Similar Questions
-
Add remote host OME Discovery Range Group
Hello
I built a new deployment mechanism for Windows using Microsoft Deployment Toolkit 2013 servers. One of the last tasks that I am trying to automate becomes OMSA/OME installed as part of the deployment. I have the OMSA configured as a task to install and it works great. The last piece of the puzzle is to put the new server added to OME.
My question: is there a way to add a new server to a range of discovery remote group so it can be included in the next regular Group Discovery / inventory? It does not appear that the CLI for OME commands reach the remote. I spin OME 1.3 and read, it includes APIs of REST, however, I'm not too familiar with it yet and am not sure if the API would provide a solution.
Anyone have any suggestions to automate this?
Thank you
Ryan
Found this post. Modified to fit my needs and it works perfectly. Hope this helps someone else.
http://en.community.Dell.com/support-forums/servers/f/177/t/19527611.aspx
-
Windows 7 does not see the xp on network machines
We are a store Dell running XP Pro on peer-to-peer networks... deployment of Windows 7 Pro workstations and laptops. Out-of-the-box, we put it sharing, discovery, working group; etc. However, some of the machines Win 7 do not see network XP machines and thus cannot use the graphical interface to map to different files and resources. You can their ping, set using "Net Use" or "Add a network location" or "Connect Player" as long as you know the complete path (ie: \\server\server_share\home\bill\cad\cnc.) But you can't see them in the network window to map the drive to records letters. I have studied this issue, has visited many forums and talked to many other tech all with the same question. The conclusion seems to be because it is a Win 7 problem not addressed XP came out. So the current thinking seems to be to use the commands Net use in an autoexec.bat file. So to use the latest version of Windows with XP, we need to use commands BACK maps automatically records. A huge advances in technology. Really? Tell us we're wrong and there is an answer?
Hello
Your question of Windows7 is better suited in the TechNet forums. Please post your question in the TechNet forums.
You can post your request here on TechNet community that focuses on issues such as
http://social.technet.Microsoft.com/forums/en/categoriesI hope this helps.
-
Short discovery is a grouping my values? [HELP]
Hello everyone,
I started working with short a few weeks ago and I have a question that is bothering me and I wish it had an error in my chart.
So I created a simple graph where I get all the records in a view and place in a bulk add/replace Records and the graph says it introduced more than 8.5 M lines but when I go to the discovery, the dataset is properly loaded, and he says that the dataset has lines (aprox.) 1.8 M...
I noticed the view definition is a collection of my primary key, but I find that odd. Is this a normal behavior? I lost a lot of lines and I only did a simple graph.
I noticed that other graphics (with other tables) where I make some changes and some joints, I get the expected result and the number of records in the dataset is equal to what is given in the chart output (lines 3,4 M aprox.).
What can I do to prevent this? Is this a mistake on my chart?
Best regards and thank you everyone!
Hi Frederico,
The attribute that you designate as your Spec (sometimes called a Spec record) attribute must be unique. It is essentially the 'primary key' inside short. So you get fewer records because the first record is written to the index and then is crushed by the registration according to that share the same value for the Spec attribute.
Looks like you just need to generate another attribute in your data that is really unique (perhaps the current plus a number?) to make sure that you do not lose data.
Hope that helps,
Patrick Rafferty
-
How can I restore my tabs and groups of tabs after a update to version 36.0?
I work with many tabs when I use Firefox. I keep classified in groups of tabs, which helps to separate the different children to work I do and interests I have. I have been using this environment for years. When I started my job today, Firefox updated to v36.0, and noted the following behaviors:
1. There is only one group of tabs when you try to display tabs at Panorama, as opposed to a dozen groups;
2. normally if the hidden tabs (tabs in the same group as the startup group, and not the default page) downloading of content to what the user clicks on, icon, if any, and the name of the page will show on the tab currently, the tabs display 'New tab' and no icon. It seems, however, the number of tabs that exist across all groups of tabs, but are now ghosts this default value, a group of tabs. I must add, however, I do not count the number of tabs, so I can't be exactly. When you click on it, there is just a blank page. It is so strange that Firefox knows they are there but cannot simply attach the address.
I tried to restore the following files from my backup of Windows Home Server to the folder AppData\Roaming\Mozilla\Firefox\Profiles\ .default < gobbletygook >:
1. in the sessionstore-backups folder, I replaced the files previous.js, recovery.bak and recovery.js (not all of the upgrade ~) with the files yesterday and the day before yesterday.
When that did nothing, I replaced
2 sessionCheckpoints.json
I do not see any file with a recent date that seems to be the one that I have to restore. I should add that I don't see hidden files. I thought about the restoration of the whole of the batch, but didn't know how it would affect the program v36.0 and the profile on 35.0.1 files.
I have deadlines this week and must immediately restore my environment in order to make these possible. I have no address list on my Web pages to work in IE or other. Any help would be much appreciated.
On a second note, I had been wondering recently if this tab group environment is an appropriate way to maintain my work environment. Sometimes, during the opening of Panorama, I would get an error saying a script takes too much time, but if I clicked on continue, it would display the groups in a few seconds. I considered bringing it in bookmarks, but it would be tedious and more difficult to access and open several tabs. Initially, I tried tabs groups thinking it was just a matter of maintaining a table of addresses (in tabs) with a name or an ID of tab group. How that might go wrong? Well, there, so it is obviously more complicated than that, and I did not know that upgrades would affect the data of a personal nature. That I should abandon the use of tab groups?
With the help of information from the user, ptressel, in a post here on the existence of sessionstore.js when version 33 was released, I could easily get my tabs and groups of tabs as follows:
- close Firefox and, perhaps, wait a few seconds (30 years?) for any final closing of files;
- Check if you have a sessionstore.js file in your profile folder, named as I documented in my original post above.
- If this is not timestamped before the discovery of your problem, open the sessionstore-backups folder.
- Check if the recovery.js file is properly stamped and, if not, the recovery.bak.
- At this point, you are likely to find that none of them is before your problem occurring. If so, open your backups from this folder and go through steps 2 to 4 to find a file before your problem occurring.
- When you find a file, copy it to the root of your current profile folder and name it, "sessionstore.js.
- Open Firefox. Mine opened upwards as you wish.
It is a solution for Windows. Sorry I can't comment on other platforms, but I'd bet it's just a copy of file and change of name, it is likely even.
For Windows users, you can find you must sign out and sign in as administrator in order to access backups. You must not logoff your standard account, but do have Firefox closed as described above.
Hope that helps.
-
Windows 8 - home group network is not possible
A whole new problem now!
Execution of two laptops using Win 7 and Win 8, nine only 10 days.
Had it all set up and seemed OK, but after 4 days I started to lose emails & couldn't find them anywhere.Today, the residential group doesn't work - the two machines cannot see each other and the router & printer is found on the new machine.
As the router is not here I can't access the internet or e-mail.
I tried to move the home page settings via the Control Panel, but I get a message "homegroup is currently sharing of libraries on this computer.Homegroup is not available until the sharing is complete"is on the screen for 3.5 hours and I am unable to do anything at all with the homegroup settings.
Can someone help me please?
Hello
I think that you must make sure that you ve enabled the + network discovery + on all computers.
Network discovery is a network setting that determines if your computer can find other computers and devices on the network and whether other computers on the network can see your computer.
By default, Windows Firewall blocks network discovery, but you can activate it.Here's how a nice HowTo from Microsoft to the + enable or disable network discovery.
http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discoveryand here you can find beautiful video + how to create a homegroup.
http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup -
Hello
I was wondering if anyone here could be kind enough to help me solve this situation
I have two machines Windows 7 and Server 2008 machines remember preferences of network discovery.
I use the software on the windows server that collects data and information to two windows 7 machines and discover the network is necessary for this purpose
These machines are set up in an autonomous local network set up as a working group the only other points on the network are none based on PC hardware that fortunately, the server communicates with and reads the data of
Once network discovery is defined for the network, the system works as expected, but on each startup (or wake up) network discovery is lost and need to be authorized. This is the case at the time windows server 20008 r2 and windows 7
How can I make these permanent preferences. for that it restarts and re establish communication its self without intervention
am I missing a setting or if not is there a way I can script the selection preference on each start (/wake) upwards.
the end user must be able to turn on the system / restart and use it with needing to have any IT / networking of knowledge to the outside to get the system running.
Thank you for taking the time to read my request
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
Other computers/devices in my home group / network is unable to identify my computer
I don't think that changes have been made, but all of a sudden my scanner and another computer on my cable network do not recognize my computer. Any suggestions?
-Mike
Hello
1. are you able to see the scanner and your computer from other computers on the home group?
2. what version of Windows are you using?
3. which antivirus app do you use?Method 1:
Enable or disable network discovery
http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discoveryMethod 2: You can also check by keeping the computer in the boot and disabling antivirus.Step 1:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Please go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.
Step 2:
You can check if any third-party security software is causing issues. I suggest that you have temporarily disable or uninstall the security software installed and check if the problem is resolved.
Note: If you temporarily disable or uninstall all security software for troubleshooting so remember to allow him, after the resolution of the problems to end because your computer will be at risk.Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-softwareUninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program -
Sharing folder on the network working group
I have 3 computers (both windows vista and windows 7). I created a group on a private network and all computers have access to the public folder, but I want to share a specific folder on both windows vista computers. How do I do that? I can't find a way of only limited access to two computer users.
The public sharing, file sharing, network printer discovery and sharing is enabled.
The password and the sharing of multimedia files is DISABLED.Hello
I suggest you to visit these links and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials
It will be useful.
-
Add PS6110 with the existing data to the existing group
Hello world
Is it possible to add a PS6110 with the existing volumes and connections to an existing uninterrupted group iSCSI?
Thank you!
Sven
Hello Sven,
No sorry. There is no possibility of group "fusion". In addition, discovery addresses are different for servers must be updated.
If you have enough space, you can migrate the data to a group. I.e. through Storage vMotion from VMware, then reset the released members and add it to the group.
Any solution you are looking for will be based on the host.
Kind regards
-
cannot depend on the discovery network and media streaming in windows 7
I have recently reinstalled windows 7 because that... Well, it was long due, my laptop for about 3 years now and still had the original installation on it. But this time every time when I try to turn on my network discovery he constantly changing to and in my home group when I click on choose media streaming options and try to turn on media streaming it dose nothing, I looked at about 20-25 different sites/forums and followed the guide on here it is turn on and set to automatic
o computer browser
o Client DHCP
o customer DNS
o network connections
o knowledge of network locations
o remote procedure call (RPC)
o server
o support TCP/IP Netbios
o workstationand a few others that I found as switch function Discovery Provider Host but still nothing, even uninstalled my A / V AVG, turned off my firewall altogether and also tried to get into safe mode with networking, I tried to leave my home group and join, tried to change an active home to work and even public network but still not good.I mainly use this function to listen to music from my laptop to my Xbox then play the games, but if my Xbox can't locate my cell phone so I can't listen to music, using windows media center, it works I can listen to music, photos videos etc, but that's all that is not of a any real use to me.My laptop is a fujitsu Siemens, I have a Wi - Fi connection with my laptop and Xbox, but have you tried Wired, the Xbox can find my laptop ok MOM, she can't find my cell phone no more.IM at the end of my rope here I really don't know what else to do to reinstall my windows in the hope that it work that I really want to avoid, especially if it still does not.Right, I discovered how to activate my network discovery and multimedia streaming, I solved this problem when trying to leave my home group, and he wouldn't so let me google and I found this link http://www.sevenforums.com/network-sharing/23571-cant-leave-homegroup.html where he says to check
The base filtering engine
DNS client
Function Discovery Provider Host
Function Discovery Resource Publication
HomeGroup listener
HomeGroup provider
Server
SSDP Discovery
UPnP device host
Windows Firewallservices, only 1 of which has not been started and set to automatic has function Discovery Provider Host & Upnp Device Host so I changed it restarted now my settings be saved, left the Group House and each reflection works well.Then maybe add additional 1s in this list the standard response that is sent to these issues.Thanks anyway for the help. -
What setting should I do so I can open the files in my homegroup?
I had this same problem where I could the records in the residential group, but when I timed on a nothing was going to happen. Here is how I fixed it... On each homegroup computer, do this: 1) go to control configuration\reseau and Internet\Network and sharing 2) on the left, click on 'Advanced sharing settings change' 3) scroll down until you see 'HomeGroup connections' section 4) make sure that the "Allow windows to manage the homegroup connections" option is checked. (5) follow the instructions to close the session, then it works... In case you're curious, these parameters were also controlled in the House or at work in "advanced sharing settings" - profile market discovery-lit file and print sharing - public folder sharing (not recommended) - connections sharing media streaming off 128 bit-lit hope sharing password protected, this helps!
-
Function Discovery Resource Publication "0x80070005: access is denied."
I started having problems with my group home and found that my network discovery is turned off, and when I turn it on and click 'save changes', there is not. During my investigation, I found Function Discovery Resource Publication is set on auto but not started, and when I click to start, Im considering the above error: access denied. I use the services as administrator. Does anyone have any suggestions?
I managed to move beyond this error by doing two things:
(1) open a prompt with "run as administrator" command window and run the following:
> net localgroup administrators localservice / add
> net localgroup administrators service / add
(2) delete all files in the C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking folder. Some files wouldn't be deleted because they are used. I've just left alone.
I'm not sure if step 2) was really necessary. In any case, after that, I was able to start the service Function Discovery Resource Publication . I changed the start mode of the service to "Automatic (delayed)" as others suggested.
Hope that helps.
-
When I click on the network icon, the discovery process is very slow - 10 times slower than XP - why?
Win7 x 64 ultimate
I agree with Jimnametaken. Since we updated our organizations to Win7 desktop computers, network of navigation is very slow. We have a few applications rely on shared network folders. Since Win 7 these apllicaions fault of left and right. Only way I got to work is by deploying a group policy to delay the start of computer/logon to desktop computers will have enough time to discover the network. It does solve some of my problems. Network slow still hoist/little life that everyone difficult navigation. Most end users think that it's our incompetancy, but it's really from Microsoft.
-
Questions through the residential, computer group, not to run.
original title: homegroup
Hello
On my Samsung laptop 150N, I have windows 7starter. I min on ordinarzue peinxioal I ain Windows 7 Ultimate which has set up a group of residence (home, non-commercial).
I connect this group with Notepad, following asked me the password and define the "residence Grou.But on the group that the computer does not appear! (On the main computer, Notepad appears!) I I has used the program for windows eresoudre the problem, nothing to do. I uninstall and reinstall theresidential group, same problem.If I change the password for access to the group, the laptop immediately warned me thepassword changed while the laptop is plugged into the group, but cannot see.
He can advise me?In fact, this problem exists since I change the printer before the market.
Thanks in advance
PluniHi Pluni Almoni,
Follow these methods in the order and see if the problem is resolved.
Method 1: Temporarily disable the antivirus software and disable firewall also if all installed and check if the problem persists on the computer on which you are facing this problem with.
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
If the problem is resolved, you may need to contact the manufacturer of the program for the settings that can be changed or if there are other updates for this program.
Note: Antivirus software can help protect your computer against viruses and other security threats. Have a computer without any security software can cause a potential danger to your computer. Therefore, make sure to activate the firewall and security software once you are finished with the test.
Method 2: Network discovery may be blocking you to see other computers and devices on the network. Check if so on network discovery. If the discovery network on your computer setting is set to off, you won't see other computers and devices on the network.
To change your network discovery setting, follow these steps:
a. Open advanced by clicking the Start button, then on sharing settings Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click on change advanced sharing settings.
b. click the chevron to expand the current network profile.
c. click turn on network discovery, and then click save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
For more information, visit the below mentioned link:
Why can I not see other computers on my network?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-see-other-computers-on-my-network
You can also check the below links:
Why I can't join a homegroup?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup
Homegroup: recommended links
http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-recommended-links
Homegroup from start to finish
http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finish?T1=tab02
Hope this information helped!
Maybe you are looking for
-
Unable to format hard drive for Windows
Hello, I need your help here! You receive the same error message saying: "Windows is unable to complete the format" when you try to format an external hard drive on your computer? Honestly, the hard drive of my dell computer recently asked just to ge
-
Sound but no picture with a key of dvb hybrid usb (PX1256E-1TVH)
HelloI am usind this usb key in windows 2000 on a laptop from another manufacturer (that is to say PIVm 1.8 Ghz, 512 MB RAM, ATI Mobility Radeon 7500 with 32 MB of memory dedicated)With Savvy TV 2.2.2 I use it with a normal antenna (used for my usual
-
Outlook Express enter the password
Display in the name of the customer Outlook Express-keep popping up, enter the password and id, and it doesn't have these passwords, former employee never left.
-
HP Elite 8300 All In One touchscreen driver
Hello I need the driver for the touch screen for my HP Elite 8300 AIO. Any help will be appreciated. Thank you.
-
Everything opens with Picasa Photo Viewer
Original title: questions Dear Sir/dear Madam, I changed some folder of image files to open with the picasa Photo Viewer, but it shows its an invalid image, later all softwres like windows Explorer, windows media, internet Explorer player are opens w