Discovery of Posture ISE missing in Auth profiles

Similar Questions

• ISE on the download profile of embarkation process

  Dear all,

  I have a small question about ISE on boarding and the delivery process.

  When the client connect of the SSID, EHT will download the configuration for the client, and will change the configuration of the adapter.

  My question is, verification of the configuration of the client profile happens every time the customer connect? If Yes, the ISE will download the profile whenever the customer connect or not?

  In case the ISE download configuration once and check the configuration each time the customer connect (which makes sense), do we have a cache on the ISE for any customer that is to say that this customer has a correct profile or not? If so, after how long the cache entry should be deleted?

  Kind regards

  Mohammad incredibly

  Hi Mohammad.

  Once that a device is put in service/onboarded this device should not go through the process 'customer provisioning '. Instead, he has to hit a different rule that is placed over your 'customer provisioning' rule at ISE. For example, if your integration is to configure the client to perform EAP - TLS with certificate then once the supplicant device is configured to complete the EAP - TLS and got a certificate then you should have a rule over the rule of integration which checks the EAP - TLS.

  I hope this makes sense. Let me know if you need further clarification.

  Thank you for evaluating useful messages!

• Firefox does not load and displays the message missing or inaccessible profile.

  An update of Firefox was interrupted before completion before that

  https://support.Mozilla.org/en-us/KB/Profile-Manager-create-and-remove-Firefox-profiles

  https://support.Mozilla.org/en-us/KB/how-run-Firefox-when-profile-missing-inaccessible

• Firefox updated "bookmark backups" folder is empty, change profile.ini to circumvent the problem of 'missing or inaccessible profile', no manual backup, pls help.

  Firefox updated "bookmark backups" folder is empty. Had to change profile.ini to profile.iniOLD to work around the problem "profile is missing or inaccessible. I tried jscher2000 suggested the procedure to return to the old profile but did not include 'semi random name' in the folder of old data from Firefox, which seems to be incomplete, as said "favorite backups" folder is empty and stupid I'm not manually save my favorites (years of research). I thought when I ran the time machine they saved automatically. is it possible to recover bookmarks?

  
  

• Energy saver settings missing from the Profile Manager

  I'm under Server.app 5.1 on a MacPro El Capitan (10.11.4) running. I am trying to create a fake profile in the Profile Manager to distribute to my class to illustrate patterns of school boards and want to create one for the energy-saving settings. Unfortunately, this option is missing! Where would it be? That's all I see for the operating system parameters:

  

  Elementary my dear Watson!

  • Ensure that you have a group of devices for the appropriate devices, whether it is portable Mac or iOS devices.

  

  • Register at least a device in this group

  

  • And continue to change the settings for this group
  • You will find savings on OS X to change

  

  • The same would be the procedure for iOS payload found in the part of the iOS.

  Hope that helps

  Leo

• any missing information / temporary profile created / not having does not have access to the old c: drive profile

  Hello

  I have windows xp, a few months when I start my laptop, all the information that was on the c drive were gonne the computer started with a temporary profile and not with mine. I did nothing, I continue to use it with the temp profile. After a week when I turn off the laptop one day he initiate the Thalassotherapy with my old profile, all my papers were there. Now I use my laptop for work and stupid enough it my seem to happen again and I really need these files, I can wait for a week (even if I'm not going to be the same this last time). Can someone help me? I create a new profile to try to copy my old profile to this one, but my computer icon is missing. Help

  Hi iuris.

  Is the computer on the domain?

  Check if an error message or error code is listed in the event viewer, you can check out: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  Follow the instructions in the link below and to copy the files from the old profile to the new profile and check the results. Link: How to copy data from a corrupted to a new profile in Windows XP user profile: http://support.microsoft.com/kb/811151

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• ISE v1.4: "WARNING: Profiler Queue size limit is reached.

  Hi all

  We have improved our nodes 10 v1.2.1 Patch v1.4 ISE 6 weekends. Since then, we have been doing the above alarm message very frequently (often every five minutes) and it's really annoying.

  Six of the ten nodes have the character of PSN and they seem not to be under any large load (less than 10,000 active endpoint points shared between them) and the readings of CPU and memory and latency are all very low.

  I wonder if I ran into the following Cisco Bug:

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCuw93839

  Unfortunately, Cisco provide little information on the bug above, I can't be sure.

  Has anyone encountered this?

  Thank you.

  rgrds,

  Inayat

  I think that maybe it's actually the following problem

  CSCuy20317 Error "profile tail limit reached" in the patch 1.3/4 5 +.

  If that is the question, the good news is that 1.4 patch 7 has been posted and includes a fix for this problem

  Curious to know how you go

• Problem with update 1.2 Posture ISE

  ISE 1.2 message below is showed when we do an update of manual or automatic web posture.

  "Remote address is not accessible. Please make sure that updated feed url, proxy address and proxy port are configured properly."

  It worked very well for a long time and all of a sudden it has stopped working
  and no changes were made on the network side.
  https://www.Cisco.com/Web/secure/pmbu/posture-update.XML works in the browser.

  Some customers have reported the same. Boxes are installed with the latest version of patch 7.

  We can download updates via offline.

  I had the same problem. Both the posture feed URL updated

  1. https://www.cisco.com/web/secure/pmbu/posture-update.xml

  2. https://www.perfigo.com/ise/posture-update.xml

  giving the same error, when ISE boxes try to do updates. But these URLs are accessible from the outside.

  A TCP dump from a watch as "Unkown Alert certificates" box (when he tries to update) for the certificate received from the other end. Then the box ISE sends a (FIN, ACK) and ends the session.

  The relevant pcap file is attached

  capture-img - cisco.png

  

• Evaluation of Posture ISE

  Hello
  I'm doing an assessment of posture on a Linux OS with ISE 1.4 and Anyconnect 4.x, we also
  Use cisco ASA 5500-x for VPN connections. but the document says that Cisco ISE does not support on Linux OS, the posture assessment
  I was wondering is there any workaround for this problem solution
  or it's the limitation of technology and we should wait. did anyone done this before?

  Thank you

  There is no support for linux with anyconnect ise posture.

• Posture ISE 1.3 Inline node

  Hello

  who can explain the function of the posture inline node? What functionality are related to this type of node?

  That's right, assuming it's the flavor of Cisco's cost (which is partly based on pairs of RADIUS A - V that use Cisco Vendor-Specific Attributes or VSA).

  Third party n can support cost normalised (via RFC 3576 and 5176) and not necessarily work with ISE. Aerohive is an example I know.

• Obligation of posture ISE to check if the USP of the endpoint port is disabled

  Hello

  I wonder if it is possible to define the USP Port disabled in the endpoints as a requirement in the Posture of the ISE?

  Appreciate your comments.

  Mike

  If your question relates to the ability of the ISE, the disabling of the USB port on a PC, the answer is no.

  The NAC agent using, however, you can check various programs and may be able to check the status of the USB.

  You will need to create a new Condition of Posture and corrections.

  The condition that I will use in this example is a registry key.

  If the "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UsbStor\Start" key has a value of 3, the USB is enabled.  A value of 4 is disabled.

  So set a Condition of Posture:

  Click policy > policy elements > Conditions

  

  Posture , choose the left menu:

  

  Then choose Registry Condition in the left menu.

  Click on + Add to add a new Condition of Posture:

  

  Then, you must create remediation Actions.  Click the results button at the top of the left Menu:

  

  Choose the repair Actions then reclamation that you want to use.  I chose the link cleanup.

  + Add to add a new link to the corrective measures:

  

  Requirements , choose the menu on the left, and then create a new result of remediation:

  

  Of course, you can choose different corrections if necessary for your environment.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• Missing camera Calibration profiles

  I used to have a bunch of profiles of Adobe in the Calibration of the camera until I upgraded to LR CC 2015.6. Now, it is only a default option and it says "matrix". How can I get all of these profiles as Standard, neutral, faithful, landscape, etc. back?

  I have a Canon EOS 7 d mark ii so that camera profile should be recognized.

  Mike

  I have this camera and use LR CC 2015.6 and continue to have all the camera profiles expected.

  See 'matrix' usually means the profile files, themselves, are missing or inaccessible.

  If you're on a PC, you can review it to see if the profile files are still there:

  C:\Program Files\Adobe\Adobe Lightroom\Resources\CameraProfiles\Camera\Canon EOS 7 d Mark II

  

  To get them back to uninstall and reinstall, first LR CC 2015.0 then updating, both available as a manual download from here:

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-downloads.html

• Missing lenses fixed profile

  In my Photoshop Lightroom CC I can't choose a profile for my lens Canon EF 500mm f / 4L IS USM II when I'm in the develop module. Does anyone know how can I get the missing profile? Not even the old objective profile of 500mm f/4 is available.

  Concerning

  Steen Torner

  Hi steentorner,

  Canon EF 500 mm f / 4L IS USM II objective profile is not by following the objective profile supported:

  Lens profile Support list Camera Raw Lightroom

  You can create your own lens profile by following the below article:

  Create your own profiles of lenses "Julieanne Kost's Blog

  Concerning

  Sarika

• My Favorites are missing from the profile Reset, and I can not restore.

  Hello.

  Firefox takes too long to launch, so I restored my profile as it was suggested. He said he would keep my favorites, and the fact that it has really bothered me. If they said thai I'd lose it, would just save, but I DIND'T.

  When I go to my old data folder and try to restore the bookmarks with the backup that I found there, said Firefox is "unable to process the backup file".

  I googled similar questions and looks like it is because I am using a .jsonlz4, not a HTML file, but I don't know how to find another.

  Thanks for your help.

  Wow, so I restored again and that's all what it... strange. Sorry for the inconvenience.

• After putting the profile folder in the trash and delete, I reinstall Firefox and get the 'missing or inaccessible profile' and cannot use firefox.

  I started having the "it's embarrassing, impossible to find the website of your last" whenever I started Firefox. This happens even my preferences always says go to the home page. I deleted the folder of Firefox and re-installed application part. It did not work. Then, I deleted the folder 'profile' for firefox and then emptied the trash, so I can't get it back.
  Now when I try to reinstall Firefox, I can't access the new installation of Firefox because I always 'no profile folder exists or is inaccessible.

  If you return to the location of your previous profile folder (I hope that you back up your bookmarks at least?) and navigate to a level to the Firefox folder, you can find a text file called profiles.ini which always points to the folder that is now gone. To help Firefox to forget the old profile, you can try to rename or delete this file and restart Firefox. Does it work?

  Also, I read in another thread that the error you received is caused by a bug where you exit Firefox, when there is no more open pages. The solution is to quit smoking at least a page open.