Discovery WDM

Similar Questions

• Yamaha AC - XG WDM stuck on Satellite Pro P100

  I've updated to Windows XP by using Microsoft Windows Update, and now I get a message saying that the Yamaha AC - XG WDM audio device put unstable Windows.

  The computer I have is a Toshiba Satellite Pro PS610E-NGYSM-EN SP6 100. I can't find a driver for Yamaha AC - XG WDM on the Toshiba site, and I can't hear anything from my computer.

  Please, where is the updated audio driver?

  Hello

  I found two useful information about the driver audio Yamaha and the Microsoft service pack 1 and 2.
  Seems that the audio driver does not support two AOCS. MS

  Yamaha AC - XG driver used the PortCls function to check the version of the operating system. XP Service Pack 1, PortCls function is changed, while the Yamaha rider can't get version of the operating system properly.
  That's why Microsoft has added that the solution and the clandestine drivers cannot work on SP1.
  This problem also happens to Windows XP SP2.

  Yamaha already provides the fixed drvier.
  The fixed driver version is the following;
  yacxg.sys 6.13.10.2152 with software synthesizer
  yacxgc.sys 6.13.10.3152 free software synthesizer

  Install the fixed driver on a system after you install Windows XP Service Pack 2.

  Also check this:
  http://support.Microsoft.com/kb/328435

  If you need the new Yamaha its simple glasses driver for this sound driver. I m you will get a newer version!

  Good luck

• Satellite 2400-103, problem with the Yamaha AC - XG WDM Audio driver

  Need help. I've updated my Windows system of my Satellite 2400-103 for reasons of security through the SP pack. However, once done the Yamaha AC device driver - XG WDM Audio is not compataible. That's why I need to download another compatible audio driver. Help please...

  Hello
  I think you are talking about Service Pack 2, you?

  Microsoft considers that the pilot of his Yamaha AC - XG is unstable and can compromise the stability of the system. When Service Pack 2 is installed, Windows disables the audio driver.

  You can try to install the drivers of its generics, but it may not work with your system.

  If the sound is working, you will not be able to use a volume control on the taskbar when you use the generic driver.
  Yamaha AC - XG Driver generic:

  http://drivers.Soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html

  Useful links:
  http://www.Yamaha.co.jp/English/lsiexp.html

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;328435

  Good bye

• 10 windows network discovery broken after update 6.5.2

  Today, I decided to implement the actions of ReadyCloud and discovered that I needed to update my firmware to do this. The NAS then update itself 6.5.1.

  Just about everything (including the new shares of cloud) works, except for one thing: access to the network Windows 10.

  Can't seem to find out reliable NAS on two different windows 10 machines on the local network. Under explore > network you can actually see the NAS appear for a second, then disappear, then reappear etc.. A Windows 7 machine on the same network has no questions!

  I have since discovered that the firmware 'update' is not up-to-date, but installation manual 6.5.2 did not fix anything. I also discovered that if I manually have to map a drive to a location on the NAS Server I can navigate it very well. If I try to navigate by opening the SIN of network locations, the newly open Explorer window closes as soon as the SIN disappears from network locations.

  Here is the configuration:

  * The RN104 with firmware 6.5.2

  * Services SMB, HTTP, and HTTPS are the only ones to be activated

  * Volume 1 X-RAID on 3 discs

  * 1 USB external drive

  * Active ReadyCloud (no other cloud services)

  * No apps running / installed

  Network clients:

  1 x Windows 7 (works fine)

  2 x Windows 10 (works mapped drive, network navigation does not)

  Hoping someone can enlighten us!

  (edit: I probably would add I did obviously, as reboot all the machines in question)

  I see that your logs are invaded by Discovery WSD service-related messages. I you sent instructions on how to upgrade to a more recent version of this service.

  It seems that you used to have two volumes and the NAS still has references to the volume that you destroyed in its config that must be cleaned.

• Help determine if your router can support AirPrint with application of discovery of Hello

  AirPrint is a feature that can be used to make HP printer made after 2010 and some apple devices can communicate and printing of materials out of these apple devices so that they are both on the same private network.

  A way that we can determine their router is configured to support AirPrint is to download the Hello discover app for free from the Apple App store.  The application of discovery is a utility that displays all of the services available on the local network or on extended areas Hello Hello.

  Once you download your apple device and open it will start to provide information if you click on "Hello scanning" and lists your printers which means that your router is capable of supporting the Hello and can AIrprint. If you type as above mentioned point, and no printer is listed, then your router does not work Hello and you will not be able to AirPrint with this router.

  For more information about application Discover for Bonjure, see this link here.

  I hope this helps the community! Good impression!

• HP Envy 7640: Error 1224 and error 1726 failure Port Discovery

  Hello

  I tried to install the driver for my printer after I upgraded to 10 Windows, but so far without success.  I tried all methods I found mentioned in this forum.

  I first tried to install the driver full features software directly.  I got error 1722. Then I followed the instructions to use the wizard and disable the firewall.  When I used the wizard, I got error 1726.  I think that both of these eorrs say things like"
  Cannot add the Hp discovery Port Monitor port".  I even followed the .hta Assistant 'solution '.  It did not work.  The wizard seems to repeat itself.  So I had to click Cancel.

  I also tried to install the software with the firewall off.  I had error 1224: "unable to copy the files of Port Discovery.

  I ran the update of Windows.  It is said evertying is underway.

  Error 1224 seems a little progress of the 1722 error, but this thread had no working solution.

  Help, please!  Thank you very much.

  Hi @E-Zen,.
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with errors during the installation of the printer. I'll be happy to help you.

  Please look at the post cannot install the HP drivers: error 1722.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• LabView Sound WDM Support

  Hi guys,.

  Here's my situation:

  I want to associate an audio interface (http://www.rme-audio.de/en_products_fireface_800.php) with LabView to lead AD (en) and DA (des) conversions. The interface, that I'm looking a WDM (windows) support.

  The VI Sound says it needs Activex 8.0 and above to run. LabView would be able to communicate with the audio interface via WDM?

  Let me know if I can be providing more details.

  See you soon!

  tjinz,

  We have not all the drivers built in this interface by means of WDM, but it looks like someone has created a Toolbox that does.  This can work to connect with your audio interface: https://decibel.ni.com/content/docs/DOC-6613

• Keep the network discovery settings after you restart the Server R2 Standard 2012

  Hi all

  I'm having the following problem. After you restart the server from the network discovery will go off. Therefore, I do not see the server, this can cause problems in the future, so I need to know how to keep on even after network discovery settings server restart.

  Thanks for the help!

  Hi, manual,.

  I suggest you post your query in the following forums to improve assistance in this regard.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Thank you.

• WIndows 7 and Server 2008 machines won't remember preferences of network discovery, needs to set every time you start up or wake up.

  Hello

  I was wondering if anyone here could be kind enough to help me solve this situation

  I have two machines Windows 7 and Server 2008 machines remember preferences of network discovery.

  I use the software on the windows server that collects data and information to two windows 7 machines and discover the network is necessary for this purpose

  These machines are set up in an autonomous local network set up as a working group the only other points on the network are none based on PC hardware that fortunately, the server communicates with and reads the data of

  Once network discovery is defined for the network, the system works as expected, but on each startup (or wake up) network discovery is lost and need to be authorized. This is the case at the time windows server 20008 r2 and windows 7

  How can I make these permanent preferences. for that it restarts and re establish communication its self without intervention

  am I missing a setting or if not is there a way I can script the selection preference on each start (/wake) upwards.

  the end user must be able to turn on the system / restart and use it with needing to have any IT / networking of knowledge to the outside to get the system running.

  Thank you for taking the time to read my request

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Configuring the private network or disable questions for the network discovery in network and sharing Center.

  I just got my laptop all cleaned and had everything updated. When I got it back I was mainly concerned how my network and discovery sharing would work, because we never had a home computer and a laptop computer at a time. Our PC at home has always defined for a private network. Today, they are both defined for the private sector, the laptop will probably always be at home too, but I was curious to see how the printer share everything would work on my laptop. It would not print and I checked just the settings that the guy I of any program for me usually had the top settings. On my laptop that I was first checking out and the network discovery has been to custom on both, one on my PC was on, laptop has never been verified we or off, file sharing has been enabled on both. public folder sharing off on both, printer sharing turned off the PC at home, but on laptop, so much time, I guess me to turn on the PC I don't know yet. Printer password sharing is on the PC and laptop. I try essentially whether it is what you would call a custom setting make for a firewall setting, or could someone please just kinda tell me if the sharing of network discovery should be turned on on the laptop and the PC, or was it not suppose to be turned on to the laptop, but on the PC only? Which should be lit and which should not be enabled in the configuration of the private network? I just want to be able to print my laptop if I want to. Thank you

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  This article was written for the two Windows Vista & Windows 7.  Drop-down menu (right) allows you to activate Windows Vista Instructions.

  http://Windows.Microsoft.com/en-us/Windows/install-printer-home-network#1TC=Windows-7

• My discovery of network lights I apply and stay personal all the time since last night

  Since last night, my network discovery is in the custom; I click on turn we apply and do not change it.

  It's urgent

  Hello

  1. what operating system is installed on your computer?

  2 did you change on your computer?

  Method 1:

  If you are using windows 7, I suggest you check in SafeMode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 2:

  I suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

• I installed sccm agent on all computers. Once someone deleted compture discovery and all have console disapper. I activated the discovery now all the computer show this agent are not installed

  We sccm 2007 R2.

  We used AD discovery to discover all the computer in AD and automatic installation. We are able to deploy the agent to computers.

  I was on leave we I come back, I discovered that there us no computer system. An abducted person discovery method. I managed to re-create AD discovery of computers, but now all the computer shows that there is no agent installed.

  Hi lefogwane,

  Thanks for posting your question in the Microsoft answers Forum. For any questions about SCCM, please visit the following link:

  http://social.technet.Microsoft.com/forums/en-us/configmgrgeneral/threads

• How to disable IMAQdx periodically sending a 'discovery' to 255.255.255.255 Ping?

  IMAQdx seems any GigE cameras by periodically (about every seconds) sending a Ping of 'discovery' to 255.255.255.255.
  As my vision system does not use any camera GigE (FireWire only) I would like to get rid of these "Pings of discovery."
  Is there a recommended way to achieve this?

  Best regards, Guenter

  Hi Guenter,

  Windows is not currently a way to disable the GigE Vision support in installer. However, you can disable the mechanism of Autodiscover with the following registry key:

  You should be able to save the following in a .reg file and then import it:

• Make a backup of ASR, saved, but at the end of the record, I got this message: discovery of the ASR diskette has not been created.

  at the end of the recording, I got this message: discovery of the ASR diskette has not been created. You will not be able to restore an ASR backup without the system information stored on this disk. What does that mean? Should I save my data otherwise? I don't have a floppy drive (I'm surprised if someone does) but I have a dvd read/write cd drive... One last thing. When I looked at the content on the flash drive with program de-Frag it was lit, which means completely fragmented, the program recommended it de-fragment it... is this safe with a file of this size on a flash drive?

  Original title: Saving went well, but

  Windows XP is too old to do something other than a floppy drive.  If the automated system recovery disk is important to your backup and restore needs (HINT: YES it IS!) then get a USB floppy drive to create the ASR disk.  Or get a copy of most modern backup and restore program that works under XP and use modern media (USB, CD/DVD, keys etc.) to create a startup/recovery media.

• How will I know if my Windows XP is running in Mode "discovery"?

  How will I know if my Windows XP is running in Mode "discovery"?

  It depends on which Bluetooth stack you use.  If you use Windows to configure your Bluetooth device, see http://support.microsoft.com/kb/883259

  In my rather old Widcomm Bluetooth utility, there is a box in the "Accessibility" tab that says 'Other Bluetooth devices discover this computer.'  Access the Bluetooth configuration utility or via the Panel control, either by right-clicking on the Bluetooth icon in the system notification area (near the time).