discreet step buttons

Similar Questions

• Custom for survey/quiz buttons?

  Hello

  I'm new to Captivate by using C9 on 10 to win. I searched the forums for this issue, tried some things, but I can't always seem to get the results I need.

  Is there a way to customize the buttons in a poll/quiz slide? I want simply to be a rectangle with rounded corners, and on the steps of button control. (Something easy to do with objects in the content slides) There are custom image buttons that come with Captivate, but even when I find one with the right shape, I can not change the color or text at all. (Please correct me if I'm wrong here.)

  I tried the workaround solution I found on the forums, where you put the desired under a transparent button shape. The only problem was, there was no way to make the steps button works. Since I had to keep the real button size same-ish on the top of the form so users would click the transparent button or form (transformed into a button that does nothing) would allow key steps look good.

  Is there a way to make custom in polls/quizzes buttons that allow the stages?

  Thank you!

  Buttons on question slides partition cannot be replaced by form buttons that's too bad. However, it is possible to use the other normal buttons: go to Manager of Style of the object, in the objects of the category Quizzing and replace styles by default current button that you want to. You can check on the slide master Quiz what it looks like, because the little insight in the OSM will probably not sufficient. The buttons are used right now, depends on the theme you are using (Object styles and master slides are always elements of the theme), and they use the same type of button.

• Open a Navigation button to a text box

  In the part Try It of a simulation, that I want to put navigation called steps button and when you click on it it shows a text box with the steps that I ask them to do.  Can someone tell me how to put in place or make me a training video that shows how do?

  Add the caption text and hide it by deselecting the Visible in the box in the properties of output. Add a button and its action to show the text in the legend.

  Anthony

• Fluid grid screen size buttons - where they are?  Dreamweaver CC

  I'm looking for where the Preview size discreet screen buttons have been resettled, or function that a place is.  They lived once on the properties at the bottom of the user interface panel.

  Any help and suggestions are appreciated.

  Hello!

  Currently it is not possible in the design of the page.

  However as a workaround, you can set this option to media once you are done with your design.

  This will allow you to achieve the desired end result.

• Download with norm, hover and active state button?

  Hello

  If im having some trouble getting my download button to download a file. I'm using background images if I can use the stationary and active flight for the button. But now I have to work the href does not work. If I put an image of src file in th < a > < /a > it works fine, but then I don't get the 3 step button.

  Here is my html code

  < div id = "dw-btn-power-out" class = "dw-power-out" >

  "< a href="Download-files/Power-out/v.1.0.0/test.zip "title = 'Download Power Out' target = '_blank' > < / a >

  < / div >

  CSS

  .dw-power-out}

  top of the margin: 20px;

  margin-bottom: 10px;

  }

  {#dw - btn - power - out

  height: 68px;

  Width: 270px;

  margin-right: auto;

  left margin: auto;

  background-image: url(img/dw-power-out.png);

  }

  #dw - btn - power - out: hover {}

  background-image: url(img/dw-power-out-hover.png);

  }

  #dw - btn - power - out: active {}

  background-image: url(img/dw-power-out-active.png);

  }

  Thank you

  Why do you hover on the div? Why is the div wrapping the link? You do not have we shown any style of the tag is probably non-existent.

  You should probably do it like this:

  HTML

  CSS

  {#dw - btn - power - out

  height: 68px;

  Width: 270px;

  margin: 20px 10px auto;

  background-image: url(img/dw-power-out.png);

  }

  #dw - btn - power - out: hover {}

  background-image: url(img/dw-power-out-hover.png);

  }

  #dw - btn - power - out: active {}

  background-image: url(img/dw-power-out-active.png);

  }

• advisable to remove and reassign the listeners to button

  Hello

  I'm trying to delete and then reassign a MouseEvent.CLICK to a step on the button, using the step button for 1 second.

  When the first button is released, it works very well, but what 2nd is published, 1 a MouseEvent should be cleared and be given a second listenner.

  what I'm missing here?

  code example

  bt_ok.addEventListener (MouseEvent.CLICK, log_in);

  bt_pesquisa.addEventListener (MouseEvent.CLICK, pesquisar);

  //

  function log_in(e:MouseEvent) {}

  var BTN = getChildByName ("bt_pesquisa");

  {if (BTN.hasEventListener (MouseEvent.Click))}

  trace ("exist um listener activo");

  If (btn.removeEventListener (MouseEvent.CLICK, pesquisar)) {}

  trace ("1 remocao");

  btn.addEventListener (MouseEvent.CLICK, pesquisar_2)

  } else {}

  trace ("not removed");

  }

  }

  }

  Thanks for help

  Pluda

  removeEventListener returns an empty and not a Boolean... so you can not do the if(!...) "check.

  If you need to perform a sanity check, then you can removeEventListener first and check if it exists before adding the new event.

  Right now, we just have to trust that the current callback method is deleted by the runtime Flash

  This code works...

  function log_in(e:MouseEvent) {}

  var btn = getChildByName ("bt_pesquisa");

  btn.removeEventListener (MouseEvent.CLICK, pesquisar)

  If (! btn.hasEventListener (MouseEvent.CLICK))

  {

  trace ("add a new event listener");

  btn.addEventListener (MouseEvent.CLICK, pesquisar_2);

  }

  on the other

  {

  trace ("remove current event has failed");

  }

  }

• To set the button either is not active?

  Hello
  
  How can I make the focus to a button?
  
  I have 2 fields on the page and the button between them. Emphasis is placed on the first field. When I press tab, the focus must ignore the next step (button) and land on the 2nd field.
  
  
  Thank you.

  ! If it is a model of button, while it must contain a

  link tag...

  TabIndex is really valid for limited types of elements (mainly), but

  tag is one of the elements for which he works

  assigning a tabindex = "999" for a property

  tag which should be between the button model

• Change of the style of the button created dynamically another button click

  Hi all
  
  I worked on a small project at home, learning Flex and Actionscript I'll (he is great, BTW) and have hit a block.
  
  I'm building a screen with nested containers (HBox, VBox, tiles, etc.) eventually hold a number of dynamically created buttons. It all comes from a file of XML data using loops For. Each button is assigned a unique ID.
  
  My problem is that I have a set of buttons in an Accordion component. Each button accordion relates to a dynamically created button already on the screen. Thus, 'Step 1' on the accordion can refer to "part 5". This info is organized as a string in the .data step button. If a user clicks on the 'Step 1' button, I want to change the style of "part 5", so I need to be able to reference these buttons according to XML in step 1 data.»
  
  I tried to use the normal setStyle, but appears not to work because I can not convert a 'Part 5' representation to the real dynamically created "5" the component button.»
  
  So my question you fine people is: " How to change a button dynamically created on the other only a string that represents the ID of the button?'." "
  
  If all goes well, there is a simple way to do this (without having to navigate a tree of components). Any help would be appreciated to a new learner in Flex. If you need more info on the problem, please let me know.
  
  Thank you...
  
  Thush
  
  Edit: I think that the answer is perhaps in this thread here. That said to use a table associative to contain the ID of the components during the creation time and to use the table to make reference to them later. I will try that and see if it works. Fingers crossed!
  
  Edit 2: I cracked! First of all, I used a dictionary to store the array of objects. This used the Dictionary package (imported) and the creation of the Dictionary object.
  
  Then I added my dictionary objects when they are created.
  
  Finally, I have the buttons using the object dictionary based on a known ID string of the reference.

  Hi all

  I worked on a small project at home, learning Flex and Actionscript I'll (he is great, BTW) and have hit a block.

  I'm building a screen with nested containers (HBox, VBox, tiles, etc.) eventually hold a number of dynamically created buttons. It all comes from a file of XML data using loops For. Each button is assigned a unique ID.

  My problem is that I have a set of buttons in an Accordion component. Each button accordion relates to a dynamically created button already on the screen. Thus, 'Step 1' on the accordion can refer to "part 5". This info is organized as a string in the .data step button. If a user clicks on the 'Step 1' button, I want to change the style of "part 5", so I need to be able to reference these buttons according to XML in step 1 data.»

  I tried to use the normal setStyle, but appears not to work because I can not convert a 'Part 5' representation to the real dynamically created "5" the component button.»

  So my question you fine people is: " How to change a button dynamically created on the other only a string that represents the ID of the button?'." "

  If all goes well, there is a simple way to do this (without having to navigate a tree of components). Any help would be appreciated to a new learner in Flex. If you need more info on the problem, please let me know.

  Thank you...

  Thush

  Edit: I think that the answer is perhaps in this thread here. That said to use a table associative to contain the ID of the components during the creation time and to use the table to make reference to them later. I will try that and see if it works. Fingers crossed!

  Edit 2: I cracked! First of all, I used a dictionary to store the array of objects. This used the Dictionary package (imported) and the creation of the Dictionary object.

  Then I added my dictionary objects when they are created.

  Finally, I have the buttons using the object dictionary based on a known ID string of the reference.

• I do not receive the emails I would cc or bcc myself had &amp; now only get some legitimate mails at all

  For the last 4 weeks emails I sent and is likely to cc or bcc myself on not arrived in my Inbox. I see a copy of the emails in my "sent" folder, but they do not appear in my Inbox.

  Christ1,

  Gmail solutions do not include a better (and simpler):

  -Settings > > accounts & import > > Send an email like:

  -The default address (that you send from and to), click 'Edit Info' and check the box "treat as an alias. Click on the 'Next step' button and you're done.

  Now, email sent to you will show up in your Inbox and be marked as unread.

  -Another way to make messages appear is to create a filter with of: and: equal to your e-mail address and the box "never send spam" checked. But: the emails will be marked as read. So, I like solution one better.

• Computer printer don't read do not

  Hello everyone, I recently updated my computer to an epson (who installed/worked very well) to a HP printer photosmart c4210 all-in-one. The problem I have started the installation of the printer.

  I followed all the steps of the manual GET to step 11 where it tells me to insert the disk, I. I then follow the instructions and get to the point where the installation program tells me to "Connect the usb from the printer to the computer cord." The problem is that when I do that, my computer is the tone indicating that I just inserted a device memory, however, the 'next' in order to get to the next step button lights and become clickable (therefore leading me to believe that the program does not read the printer.)

  I made sure the printer was until I inserted the USB cable. After trying to reconnect it several times I clicked on the box beside the message saying "Check this box if you are unable to connect your printer now, Hp will install the drivers and you'll be able to connect again later." After you have clicked on the box the 'next' button lights up and I was able to complete the installation.

  After doing this and I try to print, I found that I was unable to locate the printer on my computer. I'm on vista and had to delete some files from registry using regedit.exe to play the disc.

  Someone had a similar problem to this? I have custom installation do not install all the B.S. that usually comes with the programs of these days... I was very careful to keep all the useful things that the printer should run so I don't see how this could be a problem. The only thing I do not installed is "customer" or something to that effect which States it links now and then while you are online but "is not slow process too" and gives "improved support"...

  I worked on it for hours and I am very tired, it's kindof my last ditch effort before going to bed. Tomorrow, I'll check to see if anyone has a solution for this or a miracle any which would be nice . If this isn't the case, I guess I'll try to reinstall and include all the software of B.S. that comes with the installation disc to see if it works.

  Any help on this would be greatly appreciated, thank you.

  Hey, thanks for the reply. After turning off my computer for the night and taking the disc from the drive. I turned on my computer, plugged the usb to my printer and then turned on the printer cord. A message came that vista was "installing device drivers." After that I was prompted to insert the installation again disc I did. It seemed to install more than a few things... But it works fine now. It's funny that it worked because I restarted several times, however, I'm glad he did it and am very happy with this printer up to now that I got that it works, and highely recommend HP anyone, he launched my ass Epsons, thanks again.  I will catcha later.

• Impossible to download list of Signature rule

  I have a rule of signature with more than 30 possible "shippers". There seems to be an option to download a list of entries for the match. I can download the list, but when I set the map to 'Field value' or 'Sender' the next step button remains greyed out and I can't finish.

  I tried to restart Firefox and empty the cache. That did not help.

  Does anyone else have this problem? All the patches?

  I think than real email of sender

• The use of objects multi-state for the next stage of the course 9

  In my old clumsy e-Learning authoring tool, I could create a slide with several steps. You would click the button Next to display text and graphics.  When you get to the last step, the next step button disappears, so that you know that you have completed. How can I make this work with multi-state Cap 9 objects?  I created an object with 3 States multi-state. I created a button with an action go to Next State.  It is fine until you get to the last State.  If you click the button again, it starts again with the first State.

  Yes, I can create several buttons. But I really just want a button called next step which disappears after posting the last State.  The user would know that she had displayed all the steps.

  Any suggestions are welcome.  Thank you.

  Jeanne M

  Here is a sample script:

  

  This has been implemented for 6 States (for a container of text, the Normal State is an empty form).

  There are 2 user variables:

  • v_counter has a default value of 0
  • v_max is the number of States, you can replace it with the literal '6' or you need to

  The first decision "done" check if the counter reaches the maximum value (v_max). If this is the case all States should have been disclosed, and it should end the loop. That's why this decision will disable the button used to change States (SB_StateTrigger) and here also to change its status to an invisible state (AfterLoop). Upon return to the slide, the State will be back to Normal (visible), and simply activate the button again. You can replace this with a simple action to hide as well if you want.

  If the first decision is not true, there are still reports to be shown and the counter is incremented.

  All 6 other decisions are similar (I collapsed 2 of them): they will test the value of the counter and show the associated State. I used to state3 on a common standard. This makes it possible to use exactly the same advanced also action if the total number of States is less than 6. Simply change the value of v_max.

• Controller help

  Hello, I'm pretty new to flash but I have a project that I want to accomplish, and I thought that flash can be a good tool to get there. So here is the control panel.  What I want to do is when you press the arrow buttons I can navigate the menu on the LCD. Advice articles or tutorials, you can throw my way would be useful.

  Thank you

  

  Assuming you mean you want to create a model of the view that you show rather than actually control the device, the simplest approach I think for this would be to have the screen you want to scroll as a movieclip which lies behind a mask that is the size of the scroll box.  Use the arrow to step - buttons adjust the property y of this movieclip to move a distance line height upwards or downwards, followed by the ends so that you don't scroll beyond the top or bottom.

• Office Jet Pro 7740: Officejet Pro 7740 - Macos sierra - drivers will not install.

  Will not install drivers that I am done from the HP website.

  First, sierra complains that the installation application is damaged and must be moved to the trash. If I ignore cela and run it, then when I get to the step button "click install" type AND my password, I get the message:

  "The software can not be installed, try again later".

  I see many people complaining about similar issues for awhile - any solution?

  Thank you.

  Hello
  First install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

  Then follow HP Easy Start below to get the latest version of the software:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip

  If this fails, download and install the software below, this is the essential software installed by HP Easy Start for your printer:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-printer-Essentials-G-5_3_2.pkg

  Once done go to the system preferences > Prionters & Scanners, click the sign more and select the printer listed, be sure to select the printer model in the menu drop doen and press Add.

  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

  Kind regards
  Shlomi

• MySQL Db stopped inserting records

  I'm developing a web site that accepts a user input and adds a new record to a table in a MySQL database. He has worked for a few weeks now add 70 + new test records. Well... I broke something and now he is no longer inserts records but does not give me of all error messages. I did not something obviously wrong with the form, even if I made some changes to the form.just before he fell. I refreshed the server behavior and also tried to delete and recreate the server behavior's done everything to nothing.

  I'd appreciate really some directions on this troubleshooting. I am using DW CS6 and IE11 test, Chrome, FF on Win 7.

  The page that I am developing can be seen here http://www.hollisterairshow.com/rally/vendorApp.php?blapp=yes & tspapp = yes , you will see a 'Send' button and a 'Next step' button, either should work, they both work previously and now none of them work.

  Thanks for any advice on this.

  Tony

  I think that the fault lies soemwhere in your spy validation script. If comment on them you all out (as below) information is sent. (can be a difficult task of isolation that one is causing the problem). You will need to comment on each one individually to find the culprit and see what kind of relationship we have with the form. To me, it seems that the form does NOT work because the validation is perhaps incomplete.