Download with norm, hover and active state button?

Similar Questions

• What will happen with my agent and active Windows 8, I will have bought with the laptop after I swap HDD with SSD?

  Original title: replacement disk and windows.

  Hello guys.

  I am considering buying a new laptop. The model that I found and I like has a HARD drive if I want to replace it with the SSD to the format of my previous laptop. (Due to the low energy consumption, greater speed, etc.). So I have a 256 gb SSD in my previous loan of laptop replace new one HARD disk, yet what will happen with my agent and active Windows 8, I will have bought with the laptop?

  I can reinstall windows 8 on the SSD, but I don't have a key to activate their... How will I be able to get the key from previous series if the laptops will only work with a recovery partition these days here? I asked a guy in the store, I buy my laptop since and he told me that he does not know and I have to ask for help. However, to create a message of support I need a serial number of the model I did not because I have not yet bought a laptop, so I don't know what to do... I really don't want to stick with the HARD drive, but also I can't afford another model.

  Is it possible to do a recovery with my laptop disk when I get it, then replace the drive with my SSD and run the recovery disc I made?

  The laptop I want to buy is an Asus if that helps...

  Thanks in advance...

  The 'Raw' State is not necessary, it is the State of any drive (SSD drive or hard drive) would be in if you just remove a disk new in box and will need to be "initialized", since you have already used the player already initialized sound.

  Do not format the drive, rather than delete all existing partitions, (the SSD shows then as being "unallocated"). Now you are ready to restore the backup Image you created. During the restore process Acronis will recreate the partitions that were on the hard drive on your SSD.

  J W Stuart: http://www.pagestart.com

• When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  Which is usually caused by a lack of unpacking the directive (< em: unzip > true < / em: unzip >) in the file install.rdf to this extension.

  See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking

• Animate the edge - how to steal in hover and active effect in CSS?

  Hello

  I face some problem by adding the hover/active effect in css.

  To get examples-, I have two button text - (home & about us)

  I would like to add that, when I hover over the button, it will show underscore, features when click on it, it will be active with different colors

  and when I click on the button active anther button should be Michael & clicked button should be active.

  Help, please...

  Concerning

  E. Kumar Muduli

  Hello

  The best way to achieve this would be to specify properties with code, because there is no transition animation you are looking for.

  Start by opening edge animate and make two text fields at the 'home' and 'about '. Then name the text fields with a

  ID by changing the name in the properties panel. Click in the top text box and change the name

  ID to something that is easy to identify. I chose "homeText":

  

  Repeat this step for the "comments" text field. Then, click the Actions open next to your House text field object in the timeline area:

  

  Choose 'click' in the popup menu that appears:

  

  Copy and paste this code below (it's the code style CSS color property). Be sure to change 'homeText"that you chose to call the House text field object:

  SYM. $("homeText") .css ("color", "#650097");

  SYM. $("aboutText") .css ("color", "#000");

  

  In this example, I made the #650097 Home-link active color (purple). This code shows on board animate to the purple Home link and to make sure that the link is black by default (#000).

  Then click on the button "+" in the Actions window open. This time, choose "mouseover". This is where we will add the code for the feature of sensitives.

  

  Copy and paste the following code in the code window:

  SYM. $("homeText") .css ("text-decoration", "underline");

  Finally, press the "+" to add an event in addition to the buton. This time, choose "mouseout/mouseouthandler()". This code will add the button functionality to make the underlining disappears once the user is no longer hovering above it. Copy and past the following code in the window code:

  SYM. $("homeText") .css ("text-decoration', 'none'");

  Repeat these steps for the aboutText button. The code for the about button is below.

  Click on:

  SYM. $("aboutText") .css ("color", "#650097");

  SYM. $("homeText") .css ("color", "#000");

  MouseOver:

  SYM. $("aboutText") .css ("text-decoration", "underline");

  Mouseout/mouseouthandler():

  SYM. $("aboutText") .css ("text-decoration', 'none'");

  If you need further clarification / statement, let me know. I hope this helps!

• Problem with the checkbox and 'if' statement 'else if '.

  Hi, I had something like this:

  if (this.rawValue=="0" ){
    app.alert("0");
    this.resolveNode("Circle1").presence = "hidden";
    this.resolveNode("cross").presence = "visible";
   }  
  
  
  else if (this.rawValue=="1"){
    app.alert("1");
    this.resolveNode("Circle1").presence = "visible";
    this.resolveNode("cross").presence = "hidden";
    }
  
  else{
    app.alert("2");
     this.resolveNode("Circle1").presence = "hidden";
    this.resolveNode("cross").presence = "hidden";
   }
  

  I put a default position on the neutral State. The values are default: on = 1, off = 0, neutral = 2.

  When I'm clicking my button to check it works only 'market' (1) and (2) State "neutral." 'off' State does not work and I do not know why.

  Please help me with this.

  Hello

  Here is the form to the you: https://acrobat.com/#d=qiBnkcpRnPWxA5hokFXvQw.

  I shook the script, but it wasn't the main problem. The issue was that the box is on the Master Page and had a default value of the neutral. Some objects on the Master Page, as with the values by defect and buttons, checkboxes can behave badly when the form is reparqué (layout: ready event).

  If you take a look at the form, you will see the objects on the design Page behave as expected. However, similar objects on the Master Page by default returns every time that the layout event: loan fires. It has already been noted with Adobe.

  I recommend that you move the objects in a design Page or perhaps use a drop-down list instead of the check box.

  Niall

• Slide several boxes and align itself with several locations and reveal the button

  Hi I am developing a game where the user chooses from a range of boxes to the left of the screen and can drag the 3 of them separately from 3 boxes to right ther. each box can be moved anywhere, and the order is not important. Once the 3 boxes are all full, I want a new button to appear. I finished a tutorial and I have a box works perfectly, but no matter what I try, I can't work with several boxes and locations. Here is a list of the instance names of film clips more my actionscript. I have attached a link to the flash file. Any help would be really appreciated. See you soon

  LINK

  http://www.sainters.NET/flash_preview/flash_test/Flash test_v6.fla.zip

  INSTANCE NAMES

  1 box = 'circle_mc.

  Box 2 = "circle_mc2."

  the two grey boxes are called = "targetCircle."

  ACTIONSCRIPT

  function dragSetup (clip, targ) {}
  clip.onPress = function() {}
  startDrag (this);
  this.beingDragged = true;
  };

  clip.onRelease = clip.onReleaseOutside = function () {}
  stopDrag();
  this.beingDragged = false;
  If (eval (this._droptarget) == targ) {}
  this.onTarget = true;
  _root. Targ.gotoAndStop (2);
  } else {}
  this.onTarget = false;
  _root. Targ.gotoAndStop (1);
  }
  };
  the following variables can store the start position of clips
  clip.myHomeX = clip._x;
  clip.myHomeY = clip._y;
  the variables below are going to store the position of end of clips
  clip.myFinalX = targ._x;
  clip.myFinalY = targ._y;
  clip.onEnterFrame = function() {}
  all these actions basically just to say "If the mouse is in place (in other words - the clip is not moved).
  then replace the MC to its original start (with a smooth movement) point ".
  If (! this.beingDragged & &! this.onTarget) {}
  This ._x-= (this._x-this.myHomeX)/5;
  This ._y-= (this._y-this.myHomeY)/5;
  If the circle is moved on any part of the target, it slides toward the center of the target
  } else if (! this.beingDragged & & this.onTarget) {}
  This ._x-= (this._x-this.myFinalX)/5;
  This ._y-= (this._y-this.myFinalY)/5;
  }
  };
  }

  dragSetup (circle_mc, targetCircle);

  You can probably do all the things you want to do.  I will make them for you well.  Trying to figure out how what I've provided works and then try to reason things for the changes you want to perform.

• Download Windows 7 with product key and activation

  Hello

  Can someone help me how to reinstall and activate windows 7?
  I bought the computer dell laptop a few years ago that came with Windows 7 home premium.
  Now my system is not at all start due to a problem. My recovery disk also does not work.
  I have a product key that is written on the battery label.
  So are there any why I can download windows 7 with this product key from the Microsoft Web site? and reinstall the OS?
  Please help me!
  Thank you best regards &,.
  Sadanand

  Download Windows 7 proper. ISO file (must match for your product key version)

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots

  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (The steps are the same, except that you do not create a repair disk but complete an installation DVD)

  Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

  Hello HP assistants.

  I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

  Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

  As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

  Thanks in advance.

  Hello

  As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Problem with the installation and activation of Autodesk Autocad 2011

  I'm having a problem with the Autodesk Autocad 2011 activation. After I download and install the software, there should I active and a window opens to activation. The problem is the window is empty and I tried closing and reopending the program. I tried to uninstall and reinstall the program several times and get the same result. I checked the site Autodesk solutions and tried what they suggested, but without success. Help, please.

  Thank you

  Matt

  Hello

  You can activate AutoCAD, through activation and the recording interface, you can activate your product 24 hours a day, seven days a week, through the Internet or by e-mail. Or the other option takes only a few steps to complete and requires your product serial number and registration information.

  http://images.Autodesk.com/ADSK/files/autocad_2011_faq_us.PDF

  Also try the suggestion in the given below link and check if this is useful to solve the problem.

  http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10244471&LinkId=9240617

  http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10243884&LinkId=9240617

  If this does not help, you must contact the support of AutoCAD to help you activate the product.

  http://USA.Autodesk.com/ADSK/servlet/PS/index?siteid=123112&ID=2714854&LinkId=9240617

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why emails downloaded with the subject and the address is different from what is actually in the email?

  The object and the address listed in the message pane are completely different from what is in the actual email, read in the pane display or when the e-mail is opened. The e-mails are correct given online. For example:
  Subject A has an A - email sender email
  E-mail subject B of B of the sender - email B
  Topic email of sender - email C of C
  After the download of Thunderbird:
  Subject A has an A - email sender email
  E-mail subject B of B of the sender - email B
  Email subject of C of the sender - email A * subject and sender in C but which is actually an email

  This started happening in the last month, and seems to be random. Sometimes, everything is correct. But more often there is a little exhibit the behavior above. I have several email download from the same domain, but this problem seems to occur ostly with my main email account.

  Restart with disabled modules does not solve the problem. However, I think I found the cause and solution. I was using Windows Security Essentials support for XP until April 12. I installed another sequel, FortiClient, I used successfully on another computer (not e-mail). FortiClient was the problem, in my opinion. I replaced it with something else a few days ago and have not experienced this problem since.

• Is it a diversion? 'open with' bar message and gift of button

  My firefox was hacked?

  Firefox on my mac 14.0.1 opened with a bar of black message just below the URL field, with a "Donate" button on the right side of the bar.

  "Open with has been upgrade version 5.2.1. Please consider making a donation to the project. »

  I couldn't find 'Open with' tools-> window add-on. I googled 'Open with' and found a reference to this Slavic page:

  https://addons.Mozilla.org/MN/Firefox/addon/open-with/versions/5.2.1

  This part of the firefox package? My firefox has been compromised? If so, what should I do?

  Never mind. I discovered that 'Open with' is an extension I have installed 1-2 months due to a problem of Adobe PDF with firefox. Firefox includes more hyperlinks when generating a PDF file, in order to work around this problem, I installed this extension that allows me to launch Safari on the Web page. I can generate a good PDF from Safari.

  I'm just surprised that a legitimate extension developer would pop up a message bar asking for a gift like that.

• Download with Muse FTP and editing problems.

  Hello

  Please help if you can.

  I got to create my Web site and it launched on Adobe businesscatlyst and it sounds great!

  http://magicorganic.BusinessCatalyst.com/

  There is a big problem of loading to the top of my host. IPage.

  First, I loaded it with the feature of FTP, Muse and he stopped 61% download and I got an error message about the images.

  Then I exported the files in my documents. (And noted there is no Home Page didn't mention just Index) here:

  

  I then uploaded manually to IPage: here

  

  and seen my site www.magicorganic.co.uk and its all over the place. I then tried to download again using FTP with the files already on the host computer and loaded before 91% and error message. See here:

  

  If anyone has any ideas where to go with this please gt back to me.

  Thank you very much

  I found that simply removing the "/" in the FTP dialog under "host directory", your problem is solved. Apparently the Muse adds the ' / ' and if you have one in the dialog box, there will be two instead of a single responsible for the mistake. I'm not a technician and just discovered this fix. I hope that helps!

• ORA-01427 with WHERE clause and CASE statement

  Hi guys,.
  I get the error ORA-01427 when you try to select * from my dimension table
  When the parameter: P_HZA is 4. I used the keyword IN but the error still appears.
  no idea why?
  
  Select * from testtab
  where mycar = 4
  and "coretable". "" HZA ' IN
  CASE
  When: P_HZA = "4" then (button SELECTION OF DIM_HZA)
  other: P_HZA
  END
  
  Thank you

  you missed table_name and also this can cause several error so lines (ORA-01427: einreihig subquery returns more than one line)

  SELECT *
    FROM tableA
   WHERE mycar = 4
         AND "coretable"."HZA" IN
                CASE
                   WHEN :P_HZA = '4' THEN (SELECT key FROM DIM_HZA)   ---- may be you need to have max  to get only one value
                   ELSE :P_HZA
                END
  

  See you soon,.
  Manik.

• Download with serial no and no discs

  Where are you going on the Adobe website to download Photoshop Elements 10 if I have my serial number and not the discs.

  You can download the demo version of the software using the link below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download on this site.

  Photoshop/Premiere Elements 10: l http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm

• Help with MYSQLi query and WHILE statement

  Hello

  Do not know what is the problem here but the same record is printed in the while loop 11 times (the amount of records in the table).

  ----------------------------------------------------------

  <? PHP

  Query & main connection

  Connection to the base and the error

  $con_host = 'X '.

  $con_username = 'X '.

  $con_password = 'X '.

  $con_database = 'X '.

  $con = mysqli_connect ($con_host, $con_username, $con_password, $con_database);

  ? >

  <? PHP

  Query

  $sql = "SELECT * FROM hardware ORDER BY name ASC";

  $query = mysqli_query ($con, $sql);

  $row = mysqli_fetch_assoc ($query);

  $row_count = mysqli_num_rows ($query);

  Create Variables

  $name = $row ['name'];

  $size = $row ["size"];

  $quantity = $row ['quantity'];

  $protection = $row ['protection'];

  $location = $row ["location"];

  $sublocation = $row ["secondary"];

  $bc = $row ["BC"];

  $id = $row ['id'];

  ? >

  <! doctype html >

  < html >

  < link href = "stylesheets/main_stylesheet.css" rel = "stylesheet" type = "text/css" > "

  < link href =' http://fonts.googleapis.com/CSS?family=slabo+27px ' rel = "stylesheet" type = "text/css" >

  <! - Favicon - >

  < link rel = "shortcut icon" type = "image/png" href = "images/icon.png" / > "

  < style type = "text/css" >

  < / style >

  < head >

  < meta charset = "utf-8" >

  < title > list of < /title > printing equipment

  < link href = "stylesheets/print_stylesheet.css" rel = "stylesheet" type = "text/css" > "

  < script src = "sorttable.js" > < / script >

  <!-< onload = "window.print () of body" >-> ""

  < / head >

  < body >

  < div class = "non-print print_button" onClick = "window.print ()" > print < / div >

  < div class = 'print_text non-print' > select the sort the list by clicking on the categories of the table, and then click Print below < / div >

  < div class = "print_a4page" >

  < div class = "print_header" >

  < div class = "print_header_logo" > < img src = "images/logo.png" width = "306" height = "43" > < / div > "

  < div class = "print_header_text" id = "header_text" > Drama Database < / div >

  < div class = "print_header_info" > printout: < script type = "text/javascript" >

  var currentTime = new Date();

  var month = currentTime.getMonth () + 1;

  var day = currentTime.getDate ();

  year = var currentTime.getFullYear ();

  document. Write (day + "/" + month + "/" + year); < /script >

  < br >

  Total records:

  <? PHP echo $row_count? > < / div >

  < / div >

  < div class = "print_header_divider" > list of equipment < / div >

  < div class = "print_body" >

  < div >

  < name of the form = 'users' method = "post" >

  < div class = "table_print" >

  < table width = "100%" border = "0" cellpadding = "5" class = "sortable" >

  < class tr = "table_header_print" >

  < th = "15%" scope = "col" width > name < /th >

  < th = "12%" scope = "col" width > size < /th >

  < th = "9%" scope = "col" width > quantity < /th >

  < th = "12%" scope = "col" width > Protection < /th >

  < th = "17%" scope = "col" width > location < /th >

  < th = "12%" scope = "col" width > secondary < /th >

  < th = "11%" scope = "col" width > Barcode < /th >

  < th = "12%" scope = "col" width > Internal ID < /th >

  < /tr >

  <? PHP {? >}

  < class tr = "table_body" >

  < td > <? PHP echo $name? > < table >

  < td > <? PHP echo $size? > < table >

  < td > <? PHP echo $quantity? > < table >

  < td > <? PHP echo $protection? > < table >

  < td > <? PHP echo $location? > < table >

  < td > <? PHP echo $sublocation? > < table >

  < td > <? PHP echo $bc? > < table >

  < td > <? PHP echo $id? > < table >

  < /tr >

  <? PHP} while ($row = mysqli_fetch_assoc ($query));? >

  < /table >

  < / make >

  < / div >

  < / div >

  < / div >

  < / body >

  < / html >

  You assign row values to variables outside the loop if of course they never change! Make the way Ben tells you.