Disk Cleanup program will not work.

Similar Questions

• Update XP KB2707511 and dos programs will not work. I get an error in NTVDM 'the parameter's imcorrect

  After loading the high windows update KB2707511 my BACK program will not work. I get an error in NTVDM "parameter is imcorrect" and the program closes.

  Original title: XP update programs KB2707511 and back

  Have you tried to uninstall it to see if that helps?

• "Notification Dll has not been registered, program will not work correctly.

  Dell Inspiron 2200 windows configuration error "Notification dll has not been registered, program will not work correctly.

  I checked several sites to try to fix this error without success. I have uninstalled, reinstalled, tried an older driver.

  go into system and con +, with no luck at the moment. Ksperov is installed where an antivirus trying something here now, doubt it will work. I noticed that many people have had this error, but I have seen almost nothing that corrected the error?

  With all the Dell laptops out there, someone has fixed it now. Also I tried to record a certain dll with no luck.

  I can't find a dll that is labeld notification.dll?

  The wireless works, but it is worsening.

  Thanks, Bruce

  Hey Brucefl,

  Try to restart in a clean boot to see if this error message is caused by a third-party program/startup process. To do this, follow the steps in this troubleshooting guide:
  How to configure Windows XP to start in a "clean boot" State

  If the restart in a clean boot prevents the problem to appear, take a look at the list of programs and services (do not forget to check her hide all Microsoft services box on the Services tab) tab of msconfig. Try disabling the programs and services to see if you can isolate what programs and services is causing this error message to occur.

  Hope that helps, I look forward to hearing from you.

• Some programs will not work for me as an administrator, but will work for other users on the same computer.

  Original title: some programs will not work for me as an administrator, but will work for other users on the same computer. I did a system restore as well as uninstalling and reinstalling programs that do not work without result.

  Did you run the System File Checker?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Try Safe Mode (you have this problem in Mode safe?).

  315222 - a Description of the Options in Windows XP (or Vista) Safe Mode boot
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315222&FR=1&PA=1&SD=HSCH

  If you cannot reproduce the errors in Mode safe see if you can further isolate the cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

  Create another user and see if they have the same problem as your current user.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  811151 - how to copy user data to a new user profile
  http://support.Microsoft.com/?kbid=811151

  Description of Windows Easy Transfer for Windows Vista
  http://support.Microsoft.com/kb/928635

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

• Notification of wireless configuration, dll has not been registered, program will not work correctly

  notification of configuration wireless dll has not been registered program will not work correctly

  Hello

  1. when the message's product?
  2. don't you make changes to your machine before the problem?
  3. What is the number of brand and model of your computer?
  4. have you updated your wireless adapters?

  I would like you to follow the steps mentioned below.

  Step 1:

  Run SFC analysis on your machine to verify if this is related to the missing or corrupted system file.

  Step 2:

  Test in safe mode with networkproblem.

  Let us know the status of the issue.

  Step 3:

  You can also do System Restore to the point that your computer was working fine.

• Compatibility Application Applications App the sharper image weather station programs will not work on Windows 7

  Compatibility Application Applications App the sharper image weather station programs will not work on Windows 7

  It is the responsibility of the manufacturer of the device to provide device drivers that allow the device works in an operating system. You will need to contact the manufacturer of the device for info and software.

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  Thank you more:
  Steve Vidacs /Hungary

  On Monday, November 5, 2012 20:14:15 + 0000, istvanvidacs wrote:

  I have Win7/64. But I don't know, how I have my USB webcam to work. The cameras settle the program will not work. Please help me!

  You must have installed a Windows 7 64-bit driver (if it exists)
  for this. Do you have? Otherwise, navigate to the web site of the camera
  manufacturer, search, download and install it.

  Ken Blake, Microsoft MVP

• "For reasons of security, this program will not work while system debuggers are active. Please remove or disable the system debugger before attempting to run this program again. »

  "For reasons of security, this program will not work while system debuggers are active. Please remove or disable the system debugger before attempting to run this program again. »

  This message appears whenever I try to open Video Edit Magic, I already turned off Norton.
  Try to adjust the compatibility setting and run...

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  http://Windows.Microsoft.com/en-us/Windows-8/get-apps-devices-working

• Opening in maximum size program will not work

  I was unable to get a program (ok - it's FreeCell) to maximize.  I tried this dimensioning of the taskbar using the arrow keys on the keyboard instead of the mouse.  He fills the screen from top to bottom, but not more than straight left.  It freezes and will not larger size by about a third of the width of the screen/monitor (with a computer 17 "laptop).  I went to the properties of the start icon and run selected enlarged (did not work) reduced to a minimum (of work); tried again, but the program will not stretch or size Full.  In a small size, you can move the window of the program anywhere on the screen, but it will not maximize from anywhere to full size.

  Thanks for the help!

  How long you are facing this problem?

  I would appreciate if you please perform following steps.

  Click Start and then click Run.

  Type SFC/scannow. (Please note that there is a space between SFC and/scannow)

  Click Ok to start the System File Checker.

  Insert the Windows XP installation CD when and if she asks.

  It will repair all damaged or corrupt system files.

  Please check your problem.

  Let me know if you encounter other problems.

  K M JAI Support general (INDIA)

• Java program will not work in his development directory

  I have a 12 years/applet program that is on the web for 12 years. It's an interactive color wheel:
  
  * http://r0k.us/graphics/SIHwheel.html
  
  My development tools are a nice text editor and the JDK. No IDE is involved.
  
  I'm doing a major update, which shows the names of the closest color to a database of the names of 1 567. I wrote it so it can run as an applet or program, and it works beautifully in the development directory. However, when I move the jar anywhere else, the following error appears:
  
  D:\progming\temp > java SIHwheel
  Exception in thread "main" java.lang.NoClassDefFoundError: SIHwheel
  Caused by: java.lang.ClassNotFoundException: SIHwheel
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
  The main class is not found: SIHwheel. Program ends.
  
  The file I'm running is SIHwheel.jar. To further complicate things, TI sorting only works as an applet. Main elements of the canvas are missing, like the preset itself. So 3 cases:
  
  (1) directory of the part: works beautifully as a program
  (2) another directory, fails as program
  3) run as an applet, highly degraded operation
  
  This used to work fine, any where, as a program or an applet. There are two fundamental differences about what I did before.
  
  (1) the new ntc.class has an own main() (essentially for the test and demo for developers who can use it). I don't think it's a problem, because I have a jar manifest by declaring that the class has the main() I want to run.
  (2) above, all classes comes from the SIHwheel.java file. However, ntc.class is from the ntc.java file. All classes are jar'red in SIHwheel.jar, however. Since ntc.java implements the functionality of the script ntc.js (name as color), and I want to share it, to keep this as a separate file.
  
  I include a manifest file in the jar and, from the unzipped pot, the MANIFEST file. MF displays a line from the Main-Class: SIHwheel
  
  What's not?

  No, the main method is not called when you run a cmdlet (only when run as an application). See the Applet tutorial [url http://download.oracle.com/javase/tutorial/deployment/applet/subclass.html] (note that the example he use Swing and you use AWT).

  A static initializer is called when a class is loaded. If do you the private init() method and make sure it is called when someone uses the class with:

  public class NameThatColor {
    private static float[][] rgbhsl;
    private static final String names[][] = { .. }
  
    static {
      init();
    }
  
    private static init() { ... }
  }
  

  Note that the static variable are reported before the static initializer and nothing else should call init();

• I recently installed Thunderbird on a new computer Windows 8.1. While trying to change the storage location of my emails to another disk, the program will not o

  Thunderbird does not open and I get the following message "Thunderbird is already running, but does not." The former Thunderbird process must be closed to open a new window. »

  I tried to uninstall and reinstall Thunderbird, but this has not solved the problem.

  Any ideas how I can fix the problem please.

  Kind regards
  Neil

  Restart your computer
  Or
  Use the Task Manager to kill the Thunderbird running task.

  If does not work, delete the parent.lock file in your profile folder.

• Windows 7 with the same error message of "Notfication dll has not been registered, program will not work correctly."

  This error message has started to come after have been a Setup screen saver display in Control Panel. It doesn't seem to do anything "not work properly", but it's pretty disgusting to see this error message every time. May is going to help me?

  Ann Snyder

  Coldwater, KS

  Hello

  If you know the name of the dll file, you can register it manually of elevated command prompt:

  Regsvr32 fullpath\yourfilename.dll

  How to run as administrator command prompt (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• Help! All programs will not work. I get the error message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  When I try to run a program (Internet Explorer, Firefox, CCleaner, etc..) I get the same message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  I can't find the "Set Associations control panel" and am not sure that he would go if I could find it, and if it work I do not know I know what to do. Help!

  Should I re - publish so that else soeone looks like?

  If you wish.
  Make sure you add a line right at the beginning: you are reposting because we could not have solved other fold it.

  Alternatively, you wait for the next person coming.

  The choice is yours, although generally you would be advised to stay put and wait. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I created a program using Visual Studio Express 2012 on my machine Windows 8, the program will not work under Windows 7 or Windows XP, any ideas?

  Developed in VS12 Express using VB.

  IDE exist on my PC in Windows 8.

  Program runs only in Windows 8, not all the other versions.

  Hi Steve,.

  I suggest you to report your question MSDN Forums.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vslanguages, vstfs, netdevelopment, vsarch

  I hope this helps.