disk error hard laptop computer hp Pavilion dv6

Similar Questions

• How to understand computer HP pavilion dv6 laptop I use

  How to understand computer HP pavilion dv6 laptop I use?

  After that, I would like to understand how to upgrade this computer up.

  the screen is 17.1 could I use screen multi touch?

  It's intel i5

  Windows 7

  I bought it with the radeon graphics card, but after changing graphics card intel HD 3000 what better map graphics radeon or intel I can insert on laptop?

  can I put ram at 8.00 4.00 GB or 16,00 Go?

  

  

  DV6-6c51er is the common model number.

  Here is the Manual:

  Manual

  It can handle up to 16 GB memory DDR3-1333 (2 x 8 GB modules).

  No way to add a touchscreen. I don't know how you changed Intel Radeon graphics card, unless you have installed a different motherboard. The original motherboard has two graphics chips, so if you install the right driver you can access the AMD Radeon HD M 7470.

  The processor could theoretically be upgraded to an i7, but these improvements are rarely economically justified because of the high cost of processors unique and time required for doing the upgrade. Somehow, I think less than 10% of the improvements that we are discussing on this Forum actually. You simpler and better (more efficient) upgrade is to install an SSD. You will think that you have an i7 and 16 GB of RAM.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• cannot update my graphic map of 6770 m on my computer hp pavilion dv6 laptop.

  cannot update my graphic map of 6770 m on my computer hp pavilion dv6 laptop.

  Hello

  You need to download the driver from HP (x). It will not work if the downloaded file has been otherwise.

  Good luck.

• Hard drive failure HP Pavilion dv6 - 6173cl

  That means more average error?

  At startup:

  SMART disk error
  Hard drive 1 (301)

  System diagnosis-> Test drive:

  Failure ID: PGEXNW-5RR7NW-MFH14K - 60A 003
  Product ID: QE029UA #ABA

  Hard drive 1

  @HP_Customer_

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
  
  If you are not familiar with messaging private forum pleaseclick here to learn more.
  
  Thank you
  Omar

• I'm looking for a Windows 7 64 bit Home Premium downgrade my 10 Windows on my computer hp pavilion dv6 laptop?

  Help.

  I have this hp pavilion dv6 bought in 2012 in Singapore. This laptop came with a pre-installed windows 7 Home premium 64-bit. Earlier this year, I got the free update of Windows 10 and I was happily obliged to update my windows 7 to windows 10.

  Few things I know, updates do not automatically at level my other drivers and software that was running smoothly in my laptop before upgrading. That was include my external hard drive I used to back up all my files once a month. My external hard drive has been iomega eGo 2 TB of capacity.

  To cut the story short, I now want to downgrade to Windows 7 Home premium 64-bit, one I had before, as many of my software are more able to run smoothly, and my hard drive with all my important data is now inaccessible, whenever I plugged the HDD in my pc.

  I always kept my original product key for windows, but I can't find a reliable source where I can download it again and reinstall it to replace the windows 10 today running on my laptop.

  Can someone help me with this?

  Thank you.

  David.

  How to: Reinstall or restore your original Windows installation after having evaluated the 10 Windows

• I have the computer hp pavilion dv6 laptop. where the serial number of the product is written on the product?

  Can you please provide the location where the serial number of HP Pavilion dv6 is mentioned? As always, I need to enter this number every time I visit to any client. I have not found that it mentioned anywhere. Please provide.

  You can find the serial number of your laptop through one of the means.

  1. The Service Tag (bardcoded sticker) inside the battery compartment of your laptop that would have the serial number of your laptop
  2. Turn off the computer and once you turn on, keep pressing the F10 key to load into the BIOS screen, and you can locate the serial number in the main menu
  3. Power off the computer and once you turn on, keep the button pressing ESC to load the start menu. In the start menu, you need to press the F1 key to load information system
  4. Once you have access to windows, press FN + ESC key simultaneously to find a popup that displays system information from your laptop.

• Drive hard uograde SSD HP Pavilion dv6-7014nr

  Hello
  I have a HP Pavilion dv6-7014nr and would like to change my standard hard drive for an SSD Sata(+-700Gb).
  My questions are:

  -My laptop does support SATA III?

  -Physics of SSD what size should I get? 2.5 inch?

  Is there a maximum capacity of SSD supported by the laptop?

  (I'm not referring to the WSSD)

  -I thought I'd get something around 350 GB, advice? (Mark?)

  Thanks for any help

  I just put a 840 EVO 250 GB Samsung in a HP Envy m6. Without checking, I am almost sure that your machine supports SATA III, no new laptops will not have that. Even if he has not a SATA SSD will work with SATA or SATA II even I have.

  You reason that 2.5 "is what you need. One thing to check is if your machine is really thin it may need a smaller height z. Some readers are 9.5 mm high (especially mechanical) and some are 7 mm. I know that the Samsung drives are 7mm while a former 520 Intel, I bought was 9.5 mm.

  As far as I know, there should be no maximum size that would support the laptop. Given that 1 TB is the maximum size of 2.5 "SSD and I don't think that 2 TB will soon happen, you can get any size. The only reason why it would be same as a limit would be something artificial that HP has added as blocks of material that they use.

  For ability, it depends on your needs. I have several computers and keep most of my media on USB 3 external drives and the main server that has a lot of disk space. If you plan on using this system and you want to download music, movies and images, you may want to look at 500 GB being the minimum. Hell, if your budget allows, you can enter a 750 GB Samsung SSD EVO for less than $400. While this seems like a lot, keep in mind that you can pass on to your next laptop, a desktop computer, or purchase a chassis and use it as an external USB drive in the future.

• Disk error hard satellite L50-B-235

  Laptop stopped recognizing Bluetooth, so restarted, but when you start it says something to check a disk and repair the hard disk, which then laptop crashed before completing. Would not start once again, it is:
  1 past age on the toshiba screen then tell no boot device
  2 load the login screen, then past ages in front welcome saying windows preparation and loading a temporary profile. When he made a mistake shows saying Windows detected a hard disk problem. Back up your files to prevent loss of information and then ask the computer manufacturer to determine if you need to repair or replace the disk. It will then crash after 10 to 30 minutes and the blue screen with my critical_process_died error, which restarts always shows described in 1.

  I have Windows (updated 8) 10 and the laptop is less a year. I've tried various searches on google and fixes, including:
  Update of system drive where Windows is is locked
  Check disk either from the start menu or the command prompt in the temporary profile
  Changed the boot order and then back again
  Several reboots
  Open to the top of the unit and removed, then replaced the hard drive

  Nothing worked, I do not have the recovery media and not really means for the moment. This could be a real hard disk problem (it heats up during boot ups) which would mean it needs to be replaced? If Yes is that these can be purchased with Windows installed on it?

  While I update to windows 10 I have a probem with the use of the hard drive because he moved to the use of 100% and the laptop just crashed.

  I search in the Admin Panel and I discovered that I have a service called host system: local system (private network). I tanslate it Spanish which is the language was my laptop.

  Also I have a problem whit the video card because systems always use the graphic istead intel video card (AMD one). I tried to solve this problem in istalling the graphic control of AMD program, but the program doesent work better because the use of the hard drive is always more 100% and the experience of the computer laptop full length.

• Upgrade hard drive SSD HP Pavilion dv6-7014nr

  Hello
  I have a HP Pavilion dv6-7014nr and would like to change my standard hard drive for an SSD Sata(+-700Gb).
  My questions are:

  -My laptop does support SATA III?

  -Physics of SSD what size should I get? 2.5 inch?
  
  Is there a maximum capacity of SSD supported by the laptop?
  
  (I'm not referring to the WSSD)
  
  -I thought I'd get something around 350 GB, advice? (Mark?)

  Thanks for any help

  HP Pavilion dv6 Entertainment PC Maintenance and Service of Guide;

  Hard drive

  Takes care of 6.35 cm (2.5 in) discs hard in12.7 mm (. 50-in), 9.5 mm (. 37-in) and thicknesses of 7.0 mm (. 28 - in) (all hard drives use the same bracket)
  Customer-accessible
  Serial ATA
  Protection accelerometer support
  Supports the following drives:
  ● 1 TB 5400 RPM, 12.7 mm
  ● 750 GB, 7200 RPM and 5400 RPM, 9, 5 mm
  ● 640 GB, 5400 RPM, 9, 5 mm
  ● 500 GB, 7200 RPM and 5400 RPM, 9, 5 mm
  ● 320 GB, 7200 RPM and 5400 RPM, 9.5 mm and 7.0 mm
  SSD drives

  Supports the 160 GB drive

  The list above is indicative of the readers installed at the factory and is not exhaustive. If the computer supports SATA2 or SATA3, most SATA3 SSDs will be compatible. The computer should support the SSD up to 1 TB or more.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Need help for upgrade of RAM and hard drive for HP Pavilion dv6-2130ej

  Hello.

  I have the HP Pavilion dv6-2130ej with windows 7 Home Prem OA system.

  1. I would like to improve my RAM from 4 GB to 8 GB memory.
  2. I would like to add another hard drive instead of CD space.

  Can you tell me please, what I need to change the card of 4 GB to 8 GB card or is there another place to add a 4 GB card more?

  In any case, I would like to get a memory card description that corresponds to my computer so I do not buy the wrong memory card. Characteristics of the witch, I do?

  Is it possible to add another hard drive to the computer instead of the Conference on disarmament and please tell me what parts do I need to buy and what is the maximum. Storage hard drive which may include my computer? There now 4RAM internal memory and 500 GB hard drive.

  I would like to make my PC as strong as possible because I use it for work with heavy programs editing and I need a lot of internal memory.

  Thank you for your help,
  Waiting for a response,
  You can contact me by email too
  [Personal information]

  Vira.

  Hello.

  I think you can install the drive and use your recovery disk to reinstall Windows.

  You can change the hard drive of your computer with a WD one Pavilion, just keep in mind that you need a 2.5 inch drive. In addition, if your Pavilion model is dv6500 or more, it has a SATA-II interface, but you can always take a drive SATA-III and it will not work (although will run at the lower speed of SATA-II).

  Here, you want to take a look at all our 2.5-inch drives:

  http://products.wdc.com/support/kb.ashx?ID=HzdPVS

  Hope this helps and let me know if you have any additional questions.

  See you soon!

• Replacing the hard drive on my Pavilion dv6 - 3150ee but the bios is not recognize it.

  Hello

  I have a HP Pavilion dv6-3150ee. my original hard drive was broken. I bought a western digital 500 GB 5400 Sata 2.

  I installed the hard drive and made the recovery. Everything went well past and ok. When completed recovery operation, the system has restarted to continue the installation of hard drives but I got this message: no boot device insert boot disk and press any key.

  so I went to the bios and tested the memory and the hard drive and all was ok. I tried to get into my bios, advanced options, but it isn't everything. My bios version is F.12.

  I don't know what the problem is, and I will be thanksful for any help.

  N.B: I have my recovery discs and my windows repair disc.

  Thank you.

  The new hard drive sometimes requires to prepare first with utility cd from Cyberlink. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.

  http://ftp.HP.com/pub/softlib/software11/COL32372/PV-80183-1/sp44645.exe

• What is ' disk error hard master 3d "problem

  When I start my computer, it always tell me "3d master hard disk error, press F2 to resume." sometimes I need to reboot several times to start, sometimes I can't start. What is the problem with my computer? Please help me, thank you!

  I would like to run CHKDSK to check the hard disk for errors.  Click Start-> computer.  Click the C: drive, and then click Properties.  Click the Tools tab, and then click check now.  Click on the Scan for bad sectors recovery attempt, then click Start and click OK.  Be aware that it can take up to several hours depending on the size of the hard drive.

  I hope this helps.  Good luck.

• How can I return the volume bar display after reimagee the laptop? HP Pavilion dv6 2120sl

  Hello

  I just got back my cell phone after being reimagee Windows.

  There are above the keyboard volume and tabs of wi - fi, wi - fi works very well, if I turn it off it changes the color red. However not in the same goes for the volume (it's always white) and also before the reimage whenever I put the volume there was little box on the screen showing how I changed the volume... Now, still works, but I want this little box back what seemed before. How can I do?

  I installed HP MediaSmart together - and restarted the laptop after her, but always without success.

  I have a 64-bit Windows 7 installation.

  Do you have any suggestions?

  Thank you.

  Hello mmirjam, welcome to the Forums of HP.

  It seems that your lack of 'volume bar' since having your laptop reimagee. I will try to help you with this.

  Start using this document from Microsoft: how the icons appear in the notification area of change.

  He should be able to guide to check settings, to see if this has been changed.

  If this does not work, then try to update the audio drivers: HP Pavilion dv6-2120sl Entertainment Notebook PC Drivers.

  I would like to know how it all happens.
  Thanks for posting on the HP Forums.

• Upgrade hard drive SSD HP Pavilion dv6-6190se

  Hello
  I have a HP Pavilion dv6-6190se my question is, is it possible to change my standard hard drive to a Samsung (1 TB) Sata

  EVO 840 SSD 2.5 inch SATA 1 to or 500 GB?

  Hello

  I see no problem with that. Please check and get the latest version of the BIOS before upgrade

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5169917#N1749

  Kind regards.

• B440 M2 SLES boot fom SAN 11sp3 fails with "disk error hard gruber" on NetApp FAS3240 lun

  Hello, gurus

  I'm doing POC for client trying to deploy SAP.  Try B440M2 starting VIC1280 2 x directly from 3240 NetApp via FC.

  Prepared 450 GB lun 0 on FAS3240, he mapped OK. In the political profile of UCS for created B440M2 service startup to boot from lun 0.

  SP3 GUI SLES 4 SAP 11 installation ISO found thin installation, lun 0 path very well, but, when the system goes to the reboot disc it does not start

  with a few «grub error hard drive» 2.2.1(d) UCSM.

  He works the config? Or, get sth to make B440 SLES LUN 0 with OS just install.

  Rgds, Yuri

  When your installation detects the lun and installs, okay, that means, this FC zoning, and lun mapping/masking is ok.

  Boot failure: something might be wrong with your boot strategy?

  Can you please send your startup strategy? and the vhba of your PC?

  BTW.

  -is - this classic SAP or HANA?

  -have you checked

  Installation of Linux on a LUN SAN Bootable

  This section describes how to install Red Hat Enterprise Linux (RHEL) or SUSE Linux Enterprise Server (SLES) on a SAN LUN logical disk or a RAID using Cisco UCS Manager GUI and the KVM Console.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/OS-install-gu...