LaserJet 2430DTN: update the Firmware Laserjet 2430dtn

Similar Questions

• Help! Accidentally updated the firmware of the Laserjet pro 400 with firmware Laserjet CP4525

  Help!  Accidentally updated the firmware of the Laserjet pro 400 with Laserjet CP4525 firmware.  The printer is now just spit out pages and never reaches a State ready for the correct firmware.  I really hope that I don't have it bricked just with a click of silly.

  Can someone help or suggest a way to put the appropriate firmware?

  See you soon

  Glyn

  I got it due sort connect the laptop via USB drivers install and then deploy the firmware.

  I then had to delete and add the printer on our print server.

  See you soon

• LaserJet MFP M127fn Pro: Unable to update the firmware on M127fn

  Hi and thanks for the support.

  I can't update the firmware.

  I downloaded firmware update and it launched.

  It does not find the printer.

  I'm sure that the rated requirements.

  I can print.

  It is turned on and connected via USB.

  He does not sleep.

  There seems to not be any error/malfunction.

  I tried as an administrator.

  I have some unrecognized devices in Device Manager. Perhaps, which could be related? Something with the USB drivers, maybe?

  Hi mightyiam ,

  Thanks for letting me know. Since you are able to print with the older USB cable, it should not be a problem. Now if you had intermittent printing problems, then it could very well be caused by the cable. If you have a spare a kicking around, you could try, just to exclude.

  As the firmware will not update, I suggest to call our technical support at the 800-474-6836 and inquire about a replacement printer. If you don't care to worry about the update of the firmware, you can decide what you want to do. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you.

• Update the firmware without success

  Help!

  I updated the Firmware of my CLJ2840 all in one and the device is now insensitive:

  Device: HP CLJ 2840

  Installation: network printer

  OS: Win 7

  Drivers: Installation of the Standard Win 7 drivers

  I downloaded the file 2800_Series_FW_Update - 20120307.exe on the HP support site.

  I followed the instructions to the letter.

  I waited for the installation of the firmware to complete in its entirety

  I have noticed the messages shown on the device LED panel that followed the procedure.

  I noticed the face smiling at the end of the installation on the computer

  Result:

  Feature cycles as follows:

  1 turn on

  Toner of cycle 2 drums as usual

  3 LED panel shows marks in the upper part

  4 LED flashes once and 3 LED bars begin to scroll from right to left...

  5 witness bright and alert light stay lit

  6 this continues for about a minute... then the cycles of line 3... over and over again

  The device is no longer visible on the network

  HOWEVER

  Even invisible on the network, I managed to run the program from firmware to success... a second time.

  Help, please!

  Our office is stuck without this printer.

  Thank you

  Hey Rota, the product that you have is a printer. These commercial products can be a little tricky. For the best chance of finding a solution, I would post in the forum for HP Business Support.

  You can find the Board Commercial LaserJet here:

  Business - LaserJet HP Support Forum

  Take care!

  Sean

• 'Fatal error 65' when you try to update the firmware of the printer

  The printer firmware update fails with 'error 65' displayed on the screen of the printer.

  I have the HP LaserJet Pro 200 M276nw MFP color, just one month outside the window of the guarantee. Downloaded the latest version of the driver M270_colorMFP_Series_FW_Update - 20140718.exe and followed the instructions on how to upgrade.

  The computer running the installation displays no error and I get the face smiling at the end. However, the printing configuration always displays the old driver from 2012. Also, the printer display does not progress as stated in the manual of stable employment. On the contrary, at some point it displays 'Error 65' and then restarts.

  How can I update the firmware?

  Please try to use the 20140521 version only, I currently have audit whitin HP why 2 different firmwares are posted and will let you know once I'll get an answer... for now please DO NOT try to install the 20140718 version...

  Shlomi

• An error occurred during the update the firmware.

  Hello, I have an orange light flashes on my Airport Extreme device indicating that a firmware update is available. However when I tried to update I had the following error every time: "year error occurred while updated the firmware-6, 721. What should I do?

  Thank you in advance for your help! ... soon a

  If this is not the case, already, connect your iMac to AirPort Extreme with an Ethernet cable. On the iMac, make sure that Ethernet is enabled and disabled WiFi (or next to). Then try to use the utility AirPort again try the update of the firmware.

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• How can I update the firmwar in the tv 48T5445DG?

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T544DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder update by Sam currend?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T5445DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder currend update satellite (Astra / Hotbird)?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Thanks for your help

• Problem with updating the firmware on 40TL838G

  Hello

  I am very happy owner of Toshiba 40TL838 screen (G).
  Recently, I tried to update the firmware on it.
  Next steps in the user manual I tried to do the update of the network. "No new updates available" poped upward. I goggled solutions and came across a manual update of the USB.

  I downloaded the firmware recent Telefilm, coppied to usb (4 GB, formatted FAT32).
  Following the online instructions I have unplluged TV power.
  Plugged in USB. Connected TV to the power and he lit. And nothing happened.

  After 20-30 sec info abut being plugged usb pop uped question I wish to put on the Media Player.

  Firmware: 6.1.0M.1
  MBoot: 00480288
  MFC: 240226

  Any ideas how to proceed with this case.

  Concerning
  SLim

  Hello

  The firmware can be downloaded and updated via the network.
  But as far as I know you need to change the drive media or software update settings can not be started.
  Media Player-> USB media player-> installation
  Then press left or right, and select THE
  Now we turn on the TV
  Insert the USB key containing the firmware and after inserting the USB firmware update information appears on the screen.
  Then choose YES

• Update the firmware, Toshiba TL 838

  I have problems with my TL838, I heard you can update the Firmware and this has solved some of the problems. Where can I find these updates?

  > I have problems with my TL838.

  What problems do you exactly with the LED Toshiba TL838 TV?

• Gigashot K40HE - update the firmware on the SD card does not work

  Hello

  IBought a Gigashot K40HE 2 years and everything was good until he stopped keep the date in mind.

  I had the assistance of Toshiba phone told me to update the firmware with the following procedure:
  1. prepare a formatted, empty SD card.
  2. Insert an SD card to the card reader. Copy the firmware file
  (file name must be "psd.bin") in the SD card. Make sure that the new firmware file is copied to the SD card.
  3. Insert the SD card into the DV.
  4. Insert the battery in the DV.
  5. Insert the adapter in the DV. (dual power supply)
  {color: #ff0000} 6. press on "Power button" to power. Then the LCD displays 'FWUPDATE YES OR NO'. Select "YES".
  and press 'OK '. The DV will update automatically the FW. {color}
  7. after that the FW update completed. LCD display will show "OK". And then, will auto power off.

  Everything was good until 6... The DV starts as shown. It justs starts normally, asking me to set the date as every time I turn on my DV.

  I tested with a SD card that usually work on other devices, so I guess that the card is not defective. It's a card SD transcend 1 GB 45 x. And I know that the card is seen by the DV, because it creates folders on it for recording photo or video.

  Has anyone an idea to help me sort this out?

  Best regards
  Ozhades

  Hello ozhades,

  before you start an update of the firmware, it is very important the battery completely full.

  After the battery is fully charged please do the fw update again.

  Best regards

• Satellite C670 - update the firmware on the CD-Rom drive

  Hello!

  I have a Toshiba Satellite C670. I want to upgrade the FIRMWARE driver for the optical unit.
  Please tell me where I can get the update.

  Features dvd / cd-rom:

  DVD RW: TSSTcorp CDDVDW Ts-L633A TO01

  Version: 6.1.7601.17514
  class CD-ROM
  Manufacturer: "Standard CD-ROM drives"
  OS: Windows 7 64-bit

  Please to help.

  Greetings

  You can update the firmware ONLY if the most recent version has been released for this drive.

  There was an update firmware for CD/DVD players * TS-L633C * and * TS-L633Y * as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htm

  But for * TS-L633A * there is NO firmware update available.

• Satellite Pro A200 (PSAE7): failed to update the firmware Vista

  Hello

  I tried tp update the firmware of my HD-DVD player with new firmware TO35 (SD-L802B), but it is not possible. The upgrade of this Winvup button is not selectable. I had the same problem with an older firmware, but I just thought that it was because the firmware is up-to-date (book is 1 month old).

  Winvup shows my drive as "TOSHIBA DVGW/HD SD-L802B TO01 (26/10/07). The discription of To35 said, he needs a version of TO33 or T034, that is the problem?

  I got this firmware update form [link firmware: http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=DE&mode=allMachi nes & action = search & teddProduct = 737]
  so, it should be the right one.

  So what can I do to upgrade my drive? Watching a HD DVD is not possible :(

  THX,
  Holger

  It is not possible to update the firmware on your SD-L802B drive because the firmware released on the Toshiba page deigned for the TS-L802A drive.
  Do not mix these two discs! It is not the same thing!

  I found this site on the engraver of DVD Super-Multi SD-L802B
  http://www.storage.Toshiba.EU/index.php?id=3&PID=221

  But according to this page, the firmware is not available for this driver (at this time?  :|)

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• I updated the firmware of my as30v and now it does not work

  It's my problem.
  In my computer, the update was completed suceffully, but then my actioncam it does not work.
  I removed the battery and nothing to do.
  The screen is off and the rec light still works.
  No information on the screen, no response. I tried to remove the time of one and an another battery. The red light is still in mode on. If I connect with the computer, nothing happened.

  Died?, but why!

  Your device is in integrated security mode / download.

  Go through the process of updating the firmware again. What operating system do you use?

  Repeat and follow this guide:

  http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=HDRAS30V&upd_id=9893&os_group_id=23

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP