disk partition, abduction, windows7 64-bit

Similar Questions

• Manager for windows disk cleanup error has stopped working on windows7 64 bit.

  Original title: Disk Cleanup stops working on windows7 64 bit, can anyone help

  Hi .i am on windows 7 64 bit on my new laptop.when I run Disk Cleanup, it stops at halfway through saying Manager for windows disk cleanup has stopped working.i tried sfc/scannow command prompt, but it is no problem because it's a brand new laptop.can someone help

  Hello

  1 were you running the scan of auditor of file system as an administrator?

  2. you have any security program installed on the computer?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest to perform the disk check and check.

  a. click on Start
  b. type cmd in the start search box
  c. right-click on cmd.exe in the list programs and then select run as administrator. If you are prompted to provide a
  Administrator password or for confirmation, type your password, or click continue
  d. in the command prompt window, type the following command and press enter Chkdsk/r X:

  Note: in this command, X: is a placeholder that represents the drive letter of the volume you want to check.

  a. press y when you are prompted to check the drive the next time the system restarts.
  b. close all applications and restart the computer.

  After the computer restarts, repeat steps a through d for the other volume and then check if the disk cleanup works.

  Important: When running chkdsk on the drive if bad sectors are found, all available on which data may be lost

  See also:

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  You can also try to run the analysis of auditor of files system in administrator mode.

  Method 2:

  You can also perform a full virus scan by using the Microsoft Safety Scanner and check.

  I suggest you to perform an analysis of your computer online by visiting the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  Hope this helps and keep us posted.

• Can the data on a disk external drive which has been recorded on an XP32 be transferred on a WINDOWS7 64 bit without any damage to the computer or the data?

  I saved data on my external HDD in TViX from my old computer, which is 32 bit and XP Sp3. Now, I would like to transfer these data to my new computer, which is Windows7 64 bit. It's not clear to me if this is possible, or what can be done.

  Hello

  What type of data you have stored on external hard drive Tvix?

  Usually, you should be able to easily move data from Windows XP to Windows 7 computer via external data. This should not affect the data on external hard drive if the condition of the drive is good.

• Satellite Pro A210 1AZ Disk Partitions

  Hello

  Hope someone can explain to me. We have two Satellite Pro A210 1AZ identical machines, Windows Vista Home, 120 GB of disk. They have two partitions on the disk in the computer. C: Vista is 56.2 GB and data E: is 54.0 GB. I guess there are other accounts hidden for the missing 10 GB partition and I guess that is the recovery partition.

  My problem is the following. Everything written in C:, programs, Documents etc., and it is more or less complete. The E: is not used. Why is there an E: partition? Why not a single 110GB C:?

  I know that I can copy files on the E: partition but trying I find annoying. My wife doesn't understand anything on the partitions, folders and files and just wants everything to be where you expect it to be - in Documents or photos. Seems reasonable.

  What can I do to get rid of the E: thing and have just a large C:?

  NB - I have no interest is messing around with the PC, I want to just use it and forget about it.

  Thank you

  Fred

  Hello Fred

  I don't know how much experience you have with the PC, but it is usual to divide the hard driver to two or more partitions. each partition can have a different name and you can save specific data on the specific partition.

  For example, I have three partitions:
  C for the operating system
  Private D for stuff like photos, movies and mp3 files and
  E for Business stuff

  Anyway, if you want to have a (the ability of the entire HARD disk) partition, you can delete second partition and expand the C partition to use any HARD drive capacity.
  Open Control Panel > administrative tools > computer management.

  In the left pane, under storage category, click on disk management
  Now select and right mouse button click on the partition that you want to change.
  In the context menu, you will see options to extend, reduce or remove the partition. Select the option you want.
  If your 2nd partition is empty, you can remove the 2nd partition, and then expand the 1st partition to use the freed up space.

  So to learn more about the bits and bytes please http://aps2.toshiba-tro.de/kb0/OPT7301UY001JR01.htm

  Bye and good luck!

• Logical disk partition not recognized in the New Installation of Windows

  Hello.  I would appreciate someone to give me any advice.  I don't know if the problem I encounter is an oversight on my part, but it was not something that I anticipated.

  To give a bit of background, until last week, I was running a Windows 7 system on my computer which included three hard drives (4 TB, 2 TB, and a smaller disk).  The 4 TB drive included my boot drive with Windows on a partition of 2 TB and then the unallocated space has been transformed into a new partition in disk management, received the drive letter G and was used for long term backup of data.

  Since then, I built a new computer and installed a new version of Windows 7 on a small SSD.  During this process, I have not all disks connected to the machine (except the DVD player) so that there is no possibility of installation of Windows, do something for these readers I didn't (I got burned by this time long ago when you reinstall Windows 95, which makes me just feel old).  After the whole installation process was performed and the new version of Windows has been working well, I opened the machine and plugged the drive 4 TB and 2 TB, assuming that Windows did not recognize them when I started.

  When I started in Windows, Windows does indeed recognize the two drives and assign drive letters.  But in the case of the car of 4 TB, he acknowledges that the partition containing my old boot drive.  No drive letter is assigned to the secondary partition.  When I go to disk management, it shows all of the remaining spaces as unallocated space, but seems not yet quite recognize space completely in the way he would if I'd created directly.  For example, if I right click in that box, I don't get the normal options to create a new Simple Volume.  Everything on this menu is grayed out except properties and help.

  So I guess I have two questions.  (Leaving aside the possibility of a hardware problem), was I wrong to assume that a hard drive divided into two partitions could be transferred from a Windows machine to another?  I honestly thought that no matter where no matter what Windows 7 machine would recognize the two drives, but maybe I'm missing something fundamental.

  Two and more important still, there advice for access to the data on this drive?

  Hello

  A problem that could happen is that the disk partition has security setting so that the profile of the user that created it would be able to access it, and seeing that you are trying to access from a new profile may not not allow you to access

  To access these files, you can try to boot from the old hard drive manually to change the setting of the partition or simply manually move the files and delete the partition.

  To start from the old disk hard restart have the hard drive is plugged in, restart the computer and while it is booting F12 key to select the boot device, after that, select the old hard disk and access them normally.

  hope this has helped.

• If I have not access to the disk partition hard base would impact on the installation of a complete operating system?

  Original title: TPG Server petition.

  I wanted to know if I di not actually have access to the disk partition hard base would impact on the installation of a complete operating system of Windows 7 Home Premium 64-bit? Instead of having a computer with a complete installation of windows mine came with versions of WinPE OEM, NT and MCE. The GPT partition server that I can see is protected. Partial operating systems seem to be installed on network disk Volumes. I think that what I have to do down the disk hard real all delete and start again but I'm having a problem to see what is all about the drive through programs and remove what I find. He also seems to have a certain type of script hidden BIOS more wrinkles to retail and canceling all decisions on versions of the oem .cfg files. She configures and installs the server instead of windows 7 Home Premium 64 bit server software. The installation gives the highest administrative authority to the network administrators who I don't know and have never met and to manage my personal laptop. It creates a serious problem when I want to use my computer for one purpose and that some people I don't know and have never met want me to use my computer for something else.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• I have windows7 64 bit on a computer acer laptop, but I want to change my OS to 32-bit. Is it possible with the same product key?

  Windows 7 64 bit to 32 bit

  I have windows7 64-bit with the computer acer laptop, but I want to change to 32 bit can it is possible with the same product key?

  If you have a retail version of Windows 7, then it is more than likely came with discs both 64-bit and 32-bit. In this case, boot from the 32-bit disk and do a clean install.

  If the 64-bit version has been pre-installed, then you need to contact Acer to see if they have a 32-bit recovery disc.

• Custom install of windows7 32-bit XP 32 bit using the new disc of MS

  Trying to do a custom install of windows7 32-bit XP 32 bit using the new disc from Ms.  27% of the expansion of the Windows files I get msg "installation has been cancled that Windows does not prepare the computer to start the next phase of the installation."  I restarted 4 times with the same result - help

  Could you provide your system specifications?

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

• Update Windows7 32 bit WIndows7 64 bit. What to do with my Adobe CC applications?

  Hello

  I get to level my work PC from Windows7 32 bit for Windows7 64 bit. Our technician COMPUTER told me that he needs to reformat the entire disk to do this, which will of course delete all my Adobe CC applications. How can I handle this when you restart the machine with the "new" 64 bit version of Windows7?  I don't have some files on my drive C, the rest is hosted on our internal server. I can back up the Lightroom catalog on my correct C drive to a backup drive.

  What happens when I go to download applications Adobe CC yet?

  Thaks for all help this issue.

  Best regards

  Steve

  For the cloud, you log out of your account from clouds before formatting

  Non-cloud to disabled

• ProBook 4330 s: what disk partition I can't delete without future problems

  Hello

  I need create simple disk partition, but I can't because there are four primary disk partitions - system, HP, HP Recovery and C tools. My application is which of these can I delete and keep the current functionality of victory. I don't know if HP tools is not necessary for the recovery disk and I find that the system disk are important information which are using System.

  Can I save disk tools on CD and computer HP will still work? Or is the best backup idea recovery disk? Information on the internet are different. Single site Web HP tools remove the other says delete system. But there are other sizes of this disc I have. My HP tools partition have 2.4 GB and 300 MB system.

  Thanks for the reply

  Bulva wrote:
  

  Hello

  I need create simple disk partition, but I can't because there are four primary disk partitions - system, HP, HP Recovery and C tools. My application is which of these can I delete and keep the current functionality of victory. I don't know if HP tools is not necessary for the recovery disk and I find that the system disk are important information which are using System.

  Can I save disk tools on CD and computer HP will still work? Or is the best backup idea recovery disk? Information on the internet are different. Single site Web HP tools remove the other says delete system. But there are other sizes of this disc I have. My HP tools partition have 2.4 GB and 300 MB system.

  Thanks for the reply

  HP_Tools partition has the Diagnostics

  Recovery partition has the recovery that are accessible with a key F11 to restart Manager.

  System partition is required by the operating system

  C partition contains the operating system and is also where you store everything and run programs.

  If you have created a recovery from USB or disk set with the HP retrieve creator of media already, then you can safely remove the recovery partition. Be aware that you will lose the built in functionality to have the Recovery Manager. F11 won't do anything.

• Pavilion 17-f260nb: need drivers for Pavilion 17-f260nb for windows7 64-bit

  Hello again,

  I have a laptop of 17-f260nb Pavilion running windows7 64-bit.

  After borrow from someone I came with driver problems.

  I posted on this forum before last year, where wonderful people responded with links for the drivers, but the link no longer works.

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/Pavilion-17-f260nb-downgrade-win...

  Can someone point me to the drivers, I need to use?

  USB does not work at the moment, and I see these hardwareid missing drivers

  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_2294103C & REV_03
  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_2294103C
  PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
  PCI\VEN_8086 & DEV_9CB1 & CC_0C03

  Could also someone point me to a driverpage for which I can use the chipset & other drivers as well?

  Thank you all for your support.

  Kind regards

  E.P.

  Hello:

  Here is the link for the usb driver, you must... Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family?product=65855

  Now, as to why you couldn't find the drivers on your laptop support page...

  All the drivers, specifications and manuals are missing from pages support again.

  They have disappeared since Friday night.

  This happened earlier in the week also.

  Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

  If all goes well, now that it's Monday, HP is going to move to fixing the real problem soon.

• El Capitan Bootcamp disk partitioning suddenly restart and lost as Partition

  Hi all

  MacBook Air 11 '' mid 2012 SSD 128 Gb

  I try to install Win 10 x 64 Enterprise,

  Free space already more than 50 GB,.

  All Driver and Win10 already created using boot camp, USB key

  When the disk partitioning Bootcamp suddenly restart the OSX (I press power button / stop)

  After when the rear I check free space of > 50 Gb for only 23 GB,.

  diskutil list result:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 120.5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 88.1 disk1

  Logical volume on disk0s2

  D9DF129D-6E60-4479-BC67-C9A1336F982B

  Unlocked encrypted

  GPT Fdisk

  Command (? for help): p

  Disk/dev/rdisk0: 236978176 sectors, GiB 113.0

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 8B19BAA5-8CA4-4C9C-93D0-BE5F70791625

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 236978142

  The partitions will be aligned with the boundaries of sector 8

  Total free space is 13 areas (6.5 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 235708599 112.2 giB AF05 Macintosh HD

  3 235708600 236978135 619.9 MiB AB00 Recovery HD

  Command (? for help):

  ---------------------------------------------------------

  I try to use GPT Fdisk only show the Partition 3

  already, try using Testdisk but cannot write lost sector said "write error for Protection.

  Is there a solution to recover lost Partition?

  Please after the release of

  Cs diskutil list

• Need Windows7 32 bit drivers for my Satellite U300 - 10 M

  I want to download drivers for my Toshiba Satellite U300 - 10 M for Windows7 32 bit operating system.

  And where is the problem. You can find them in 30 seconds.

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
  Product type > archive... and so on.

• El Capitan are a recovery HD on its internal disk partition?

  El Capitan are a recovery HD on its internal disk partition?

  Yes. All versions of Mac OS X from the Lion using the recovery partition.

• Satellite A300D-15B and Windows7 64-bit drivers

  Have installed a new HARD drive and do a clean install of Windows7 64 bit, most of the devices seem to work. I have 2 unknown devices in Device Manager, 1 is a mass storage device (assuming it's the card reader) and the other peripheral unknown just like shows (no idea what it is) can not find the drivers on the download page, also because I did a clean install lost all the utilities that is preinstalled on the machine.

  Where can I get that back in?

  I think the "unknown device" is your Bluetooth device, and Yes, you re right to the card reader, you can download them to your laptop support page.
  Good luck in your installation of Windows 7.

  I had a bad time, installation of Windows 7 in my Satellite A300-15 a, especially device drivers the dysfunction of paved touchscreen, keyboard and screen drivers when I restart my laptop.