Can the data on a disk external drive which has been recorded on an XP32 be transferred on a WINDOWS7 64 bit without any damage to the computer or the data?

Similar Questions

• Windows Explorer (Win7Home) crashes while I read my external drive; Autorun has been disabled.

  I have an external drive of My Book essential to 3 and while reading and you are trying to transfer offshore it Windows Explorer crashes on.  It will crash when browsing or file transfer.  Research led me to believe that it was because the AutoPlay.  I have regedit-ed on external drives using NoDriveTypeAutoRun (which had to be created), and then changed value for all readers, then finally used MS Fix - it tool completely disable AutoPlay.  All forms have not stopped this crash to occur.  Can anyone help?

  Toshiba Satellite P8555-S5200, Win7HomePremium, Service Pack 1

  Mucho Gracias in advance.

  Hello

  Please contact the Microsoft Community forums. I understand that Windows Explorer crashes when you try to read the external drive.

  This problem may be caused due to some third party software and due to malware and also because of a hardware problem.

  (1) have you made any changes to the computer before the show?

  (2) what is the exact error message?

  Follow the steps for troubleshooting steps.

  Method 1:

  I suggest you to check in safe mode and if it works fine then run boot.

  Step 1:

  I suggest you check in safe mode.

  Check the link to see in safe mode.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  I suggest you perform the clean boot.

  See the link.

  How to perform a clean boot for a problem in Windows Vista, Windows 7, or

  Windows 8.

  http://support.Microsoft.com/kb/929135

  Note: After the clean boot, start the computer in normal mode.

  Follow the steps to start the computer in normal mode.

  (a) click Start, type msconfig.exe in the Start Search box and press ENTER. If you are prompted for an administrator password or for confirmation, you must type the password or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 2:

  I suggest you to perform hardware troubleshooting.

  See the link.

  Error: Windows Explorer has stopped working.

  http://support.Microsoft.com/kb/2694911

  WARNING:

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 3:

  I suggest you to search for malware.

  Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problems do not solve please reply we will be happy to help you.

  Thank you.

• How can I get the media which has been recorded on Windows Vista to play on Windows XP?

  Hello Forum... I would like to download/copy of the video programs & TV on my external drive seagate, primarily from my friends laptop, so I check it plays ok. When I get home it will not play on my Win XP Pro and just freezes my laptop, is there a fix or somethink for Win Vista Home Premium so that it works with my laptop Win XP Pro... Thanking you, yours sincerely, liam k

  I'm surprised VLC didn't work... I wonder if you
  a problem with your video driver. This may have a
  Update. In some rare cases updates automatic in Windows
  will install a video driver that is incompatible with
  your system than the one you already had. In this case...
  a system restore driver or the restoration is expected to dissipate it.

  Reduce the hardware acceleration of your chart may
  be worth a try:

  How to put in back of graphics hardware acceleration
  http://www.pptfaq.com/FAQ00129_How_to_set_graphics_hardware_acceleration_back.htm
  (scroll down to: "If you are using Windows 2000 or XP")
  (try to move the cursor notches 4 (everything except left
  the last of them))

  If they improve the question, you should look for the
  site Web of MFG. your video card
  a updated driver Win XP compatible video. Or...
  If your computer is a laptop... Search support
  site of the manufacturer of your computer.

  Improvement or not... don't forget to return the cursor
  to full.

  In any case...

  If you drag and drop the. AVI on the following utility... it
  will tell you if it's a DivX file or possibly a Xvid file.

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  DivX Codec
  http://www.free-codecs.com/DivX_download.htm XviD Codec
  http://www.free-codecs.com/download/xvid_codec.htm

  Good luck...

• How can I get a copy of my statement, which has been charged on my credit card?

  I was charged for my annual dues, but I can't find any mail copy of the present and are in need of repayment. I don't see any place to download a copy of this. Grrrr

  Hi , recruiter2013,

  Please see this: print a received payment or invoice. Cloud Creative

  You can find the instructions to print your invoice in the payment section & credit cards.

  Kind regards

  Florence

• New Mac, same disk external DRIVE for the library; does not see the files

  I reconnected my iTunes library from a disk external DRIVE to my new computer, but iTunes does not recognize my files of the ALAC instead, he goes to the cloud and plays music from Apple things. How can I listen to my files? All the files are there, the library is intact; I changed the path in iTunes. Without result. He always plays with the cloud.

  You do not change the path in iTunes.  Who does as it says which is tell iTunes where media files [new] store. You change the path you launch iTunes by holding down the option/alt key, while the application starts and then choose when prompted the iTunes Library.itl file in the iTunes folder you included if all goes well on the hard disk external.  If everything you have on the outside are media files, then you better head for your old computer fast and get the rest of the library there.  It's the rest of these files in the iTunes folder that make up the other half of the 'library' iTunes needs.

• WRT610N - disk external DRIVE for Xbox 360 and PS3

  I searched through the fourms and can't seem to find this information.  I'm looking for a suggestion on the Setup and the disk external DRIVE via the USB port on the back of the router you can listen to music and videos on my 360 or PS3.  I see that some people have managed to put it in place and I would like to know which external HARD drive that they use.

  I want my externall HDD to sleep, but I want that it to wake up when I go to play the music on my computer or 360 or PS3.  Please post what disk external HARD - that someone has found that works.  Or should I just go with a NAS connected on one of the router's ethernet ports?

  Any player should work.  I use a WD drives on my own, (although I share with other systems then the xbox).  Actions are implemented for UPnP.  The documentation should be sufficient to implement that.  Make sure the drive is formatted as an NTFS drive, or it is not possible.

  In addition, make sure you have the latest firmware (21 January 2009).

  Set up the drive (aka format)

  Create groups

  Create users

  Implement UPnP

  It should work.

  In record time, readers built into the firmware and the timeout when they timeout.  You would not be able to set the timeout on this.  I didn't know all the disks than that.  If you are REALLY interested in saving energy buy a USB solid state with no moving parts.  They turned off immediately after what they read/write.

  I hope this helps.

  Robin

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• I want to disable a product but the computer on which it has been recorded on is no longer functional. How can I activate this product on a new computer?

  I want to disable a product but the computer on which it has been recorded on is no longer functional. How can I activate this product on a new computer?

  The product is CS3 Web premium. It was recorded on 2 computers in 1998 and the two are no longer working. I have all the disks and the original serial number.

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• I can't illustrator to download on my drive Ext. hard, Photoshop and inDesign work perfectly and I have 444 GB free space? any thoughts on what may be wrong or suggestions? Thank you

  I can't illustrator to download on my drive Ext. hard, Photoshop and inDesign work perfectly and I have 444 GB free space? any thoughts on what may be wrong or suggestions? Thank you

  Although Adobe indicates that you install the application on the main drive, it is possible to change the destination of the installation of creative cloud app preferences. Please note that there will always be shared resources stored on your primary drive.  In addition, temporary files will be created on your main drive during the installation process. The Adobe Creative Cloud desktop application will remain on the default drive. If you have already installed the application, you must uninstall, change the destination drive, reboot the machine and then install the application.

  (Please see the FAQ section of this link at the bottom of the page: download and install Adobe Creative Cloud applications)

• How to boot from the flash drive which has xp to install an OS?

  Boot from the flash drive

  How to start from the flash drive which has xp to install an OS

  the system's model of netbook rlg

  Intel Valérie mgsone

  How to install Windows XP on a Netbook using a USB flash drive
  http://www.TechSpot.com/VB/topic160906.html

  J W Stuart: http://www.pagestart.com

• How can I get a driver that has been deleted

  I need how do I get a driver that has been deleted

  Hello

  go to the manufacturers website and download the driver again

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• How can I reinstall the demand for 'People' in windows 8, which has been accidentally uninstalled by me?

  How can I reinstall the demand for 'People' in windows 8, which has been accidentally uninstalled by me?

  You can reinstall it from the following link:

  http://apps.Microsoft.com/Windows/en-us/app/mail-calendar-and-people/64a79953-cf0b-44F9-b5c4-ee5df3a15c63

• 64 bit sytem with vista home premium which has been randomly locking up and freezing. The error is event 6008.

  I have an ACER aspire x 3200 64 bit sytem with vista home premium which has been randomly locking up and freezing. The only mistakes were event 6008 with a description of the stop system prior to (time) on (date) was not planned.
  When these errors originally occurred, I returned the system to acer and they installed a new hard drive. After updating the vista system blockages continue 30 times over a period of 3 months. Acer sent me a new disk image on 3 disks that I have installed and updated on 11 October. There is no blocking until the 10/27, 10/28, and for the 3rd time today.
  The closed unexpected gives a blue screen if I use the locking system to the top. I have to hold the power to restart when the system crashes.
  Can someone help me solve this problem?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  But I guess it's too late for this for so long that there are probably no so old restore points.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer on the stop (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.  From what I understand, there is none of the events (which surprises me because a freeze should certainly generate an error event).

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work (but you NEED a disc).  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• How can I remove specific MacBookPro (s) and PC which have been taken by a thief (s) numere?

  How can I remove specific MacBookPro (s) and PC which have been taken by a thief (s) numere?

  I don't see an option in iTunes to reauthorize a MacBookPro (s) and PC numere specific.

  It has an option to reauthorize all but, when I click on it it gives the following message:

  Failed to remove permission

  You can only Deauthorize all computers once a year. You must wait until 24 February 2016 before you can remove all your computers again. If you encounter problems computers, please contact Support Apple customer visiting http://www.apple.com/support/itunes/store/

  I suspect that this may be a security risk in iTunes, Apple/iTunes is not allowing customers to withdraw the authorisation of systems that have been stolen by thieves.

  Unless you are able to connect to remote computers, there is no way to do. If you wish, click here and ask the staff of the iTunes Store to perform a second remove all.

  (138421)

• I can't to update manually or automatically because auto has been disabled and I can not turn on again

  I have Windows XP Professional with Service Pack 3. Microsoft does support this system more? I can't to update manually or automatically because auto has been disabled and I can not turn on again.

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Unexplained computer behavior may be caused by a third-party software
  http://support.Microsoft.com/kb/827315

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update
  http://support.Microsoft.com/kb/883614
  The automatic updates service is missing

  Update Windows in gray - restore (line 179)
  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  Automatic Updates options are grayed out? :
  http://WindowsXP.MVPs.org/aupolicy.htm