El Capitan are a recovery HD on its internal disk partition?

Similar Questions

• Update of El Capitan 1.0 recovery and Word for Mac 2011

  I installed the update of El Capitan 1.0 recovery on December 26.  Now does not load Word for Mac 2011.

  PowerPoint and Excel are very good.  But the Word does not load.

  I have OSX 10.11.2 and an iMac of mid-2011.  PowerPoint for Mac version 14.5.9.  Cannot open

  Word cannot not so tell what version I have.

  Curiously, Word was working fine until the Update December 26.

  No problem here with Word. You may need to remove all of Office 2011 and reinstall. But whatever problem you're having with Word, it is not related to OS X, or updates.

• I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  Hi Yanni,

  Tethered shooting works fine with Lightroom 6.4 on El Capitan.

  You can then go ahead and buy Lightroom and perform the tethered shooting.

  Kind regards

  Tanuj

• Within the VM, Apple_Boot Recovery HD with all the extra partition space, so cannot complete resize

  With the help of VMware Fusion Version 8.1.0 (3272237), I installed OS X 10.11 (El Capitan) via the recovery disc option. The default size of the drive was 40 GB, but I wanted 250 GB.

  When the parameters arose during the virtual machine creation process, I changed the size of the disk of 250 GB. A message pops up saying that resizing would take place after the virtual machine has been restarted. Thus, creating the VM is finished, I rebooted the VM.

  The virtual machine on my host shows operating system file size. Thus, the next step was to enter the guest OS and complete resize it using disk utility. However, I kept getting messages on the partition being too large.

  Entered the Terminal on the operating system prompted and listed drives so I can get the name of the volume to resize to the command line. Found this:

  list of $ diskutil

  / dev/disk0 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 269,5 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS ElCapitan_VM 42.6 GB disk0s2

  3: Apple_Boot Recovery HD 225.5 GB disk0s3

  Note the size of the Apple_Boot Recovery HD partition! This is supposed to be something like 650 MB, not GB225.5! (I hope my formatting remains, as I saw an option 'pre' or 'code' Editor < pre > and in the editor HTML didn't work.)

  I've not retried the vm creation, since it is a lengthy process. No idea what might have happened? Or how this can be corrected without re-creating the virtual machine from scratch?

  We have seen this issue, as well, and we reported it to the Apple... It looks like the storage of carrots merges horribly when a disc is "grown" and wrongly grows Recovery HD instead of the main partition.  I guess that a "growth hard disk" is something which cannot appear in a virtual machine, not on a Mac in the real world, it is perhaps not a scenario that Apple engineers had examined.

  Looking through our internal notes on this question, we had an engineer suggests that the problem can be avoided first reducing the primary partition (in disk utility) before more and more to fill the available space.  I have not tried this out, and I don't know if it can help to recover once you are already in the situation you are in.  If it doesn't help out you immediately, you might want to give it a try in a fresh VM.

  I hope this helps!

  --

  Darius

• El Capitan Bootcamp disk partitioning suddenly restart and lost as Partition

  Hi all

  MacBook Air 11 '' mid 2012 SSD 128 Gb

  I try to install Win 10 x 64 Enterprise,

  Free space already more than 50 GB,.

  All Driver and Win10 already created using boot camp, USB key

  When the disk partitioning Bootcamp suddenly restart the OSX (I press power button / stop)

  After when the rear I check free space of > 50 Gb for only 23 GB,.

  diskutil list result:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 120.5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 88.1 disk1

  Logical volume on disk0s2

  D9DF129D-6E60-4479-BC67-C9A1336F982B

  Unlocked encrypted

  GPT Fdisk

  Command (? for help): p

  Disk/dev/rdisk0: 236978176 sectors, GiB 113.0

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 8B19BAA5-8CA4-4C9C-93D0-BE5F70791625

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 236978142

  The partitions will be aligned with the boundaries of sector 8

  Total free space is 13 areas (6.5 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 235708599 112.2 giB AF05 Macintosh HD

  3 235708600 236978135 619.9 MiB AB00 Recovery HD

  Command (? for help):

  ---------------------------------------------------------

  I try to use GPT Fdisk only show the Partition 3

  already, try using Testdisk but cannot write lost sector said "write error for Protection.

  Is there a solution to recover lost Partition?

  Please after the release of

  Cs diskutil list

• How to copy the recovery on the new HARD drive partition, HARD drive failed?

  Hallo,

  I have a Compaq Mini netbook with Windows 7 Starter.

  The HARD drive has failed and it is not repairable. However, it seems that the recovery partition is OK.

  I want to buy a new HARD drive, install the driver on the netbook, and then use the tools/recovery partition to install windows 7 on a new PC.

  So, the question is simple: how to copy the recovery for the new HARD drive partition?

  Hello s91066.

  If your hard drive of your laptop doesn't have? If this is the case, what do you mean by the "recovery partition is ok? I doubt that this laptop has two hard disks, so if you are able to see this partition of your hard drive may still work.

  You will need a set of recovery disks to restore the partitions on the new drive. If you can start Windows, which you can probably not with a dead hard drive, you can follow these steps if you can get into Windows.

  If you are unable to boot into Windows, you need a set of disks. You can order it directly from HP. The number of the United States / Canada is 1-800-474-6836. If you are in another domain, you must visit HP's Support around the world to find contact information for your region.

  I hope that is useful; have a great weekend!

• recovery of Windows 8 (if disk crash)

  Hello

  I bought windows 8 online, update of windows 7.
  I had a bunch of files in a new directory named ESD and instructions to install win8.

  I wonder what I could do to recover the whole, if the drive of my PC crashed.
  In the past (I mean windows 7), I got a CD with the system recovery.

  What of this "installation of windows 8 online?

  Thank you very much

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  From your problem description, I understand that you need create a recovery for Windows 8 computer disk.

  I suggest you follow the troubleshooting steps to check if this may help.

  Method 1:

  You can use the external hard drive and the history of the files as a recovery disk:

  Historical files automatically backup files that are in your libraries, favorite contacts, Microsoft SkyDrive and your desktop. If the originals are lost, damaged or deleted, you can restore all the.

  A location disk or external network to help protect your files against an accident or any other PC problem

  Check out these links:

  How to use the file history

  http://Windows.Microsoft.com/is-is/Windows-8/how-use-file-history

   

  Set up a drive to history file

  http://Windows.Microsoft.com/is-is/Windows-8/set-drive-file-history

  
  Method 2:

  create a bootable DVD of windows 8

  You can follow the below mentioned article to create a DVD bootable to Windows 8.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Note: Article also applies to Windows 8.

  Just reply with the results. I'd be happy to help you further.

• How can I just disable logging in El Capitan? It is not visible in the disk utility by pressing alt and file!

  How can I just disable logging in El Capitan? It is not visible in the disk utility when you press alt and file!

  

  Mac OS X: about the logging of system - Apple Support files

  Hope this helps, good luck to you.

• Rescue and recovery software will not remove preinstalled Partition

  I recently had a T450s by a great process and tries to get her comfortable environment again.

  My two latest Lenovo laptops had a recovery in the stock installation partition, and I was able to remove simply by running the top software and selecting an option amounting to "delete backup partition" or something allowing me to back up c.

  On this machine, I ran the software and he gave me an option to create a recovery media more. I installed the software, Thinkvantage Rescue and Recovery, and he has an option to delete backups, but does not recognize the partition.

  It's deeply annoying, I do not use it and he eats up to 15 GB. If anyone has a solution for this, please let me know.

  ADDENDUM:

  Moreover, now the software on the partition is not ongoing, saying: it does not find "recovburncd.exe" and try again. Help, please.

  So reinstall RNR has failed, but I realized that I could go into administrative tools and modify the disk partitions.

  I now have this problem solved, thank you for your comments.

• What are the three steps necessary to correct disk cleanup does not not on Windows Vista?

  What are the three steps necessary to correct disk cleanup does not not on Vista OS

  This tutorial to see how id disk cleanup. See if it helps.

  http://www.Vistax64.com/tutorials/76073-disk-cleanup.html

• Impossible to reinstall OS x El Capitan via the recovery

  10.11.2 OSX

  iMac 27 inch end of 2013

  3.5 GHz Intel Core i7

  NVIDIA GeForce GTX 775M 2048 MB

  DDR3 4 GB 1600 MHz

  My iMac is buggy since upgrade to 10.11. Some programs crash frequently, and just recently, the system began to be insensitive, that needs to be forced to withdraw from the machine. Usually, when the system crashes like this, the mouse moves, but he will be.

  Twice on startup until I received the No. or prohibitive symbol showing no disk or operating system is not found.

  So, I tried a system restore to reinstall El Capitan. Everything went fine until I select the disc to install to. Then the system stops responding again once, completely frozen and I can without restoring.

  So I tried a restore from Time Machine early in the day. I think that would help, but do it anyway. It did not help, the system is still buggy.

  I ran the disk first aid.

  Does anyone have any suggestions or ideas? What's wrong? Of fact need the operating system reinstalled? Why restoration is stalling?

  Thank you!

  I think that you have a failed disk drive.

  Screen of Mac OS X - grey or prohibitory sign appears during startup

  Question (?) Mark, record of flashing or a gray screen at startup

  It's related, but not identical questions. Their causes are described in based on Intel Mac-Startup sequence and error codes, symbols. Solutions will be found in:

  A globe or a flashing question mark appears when you start your Mac

  Mac OS X - grey appears during startup

  In most cases problems can be caused by one or more of these:

  a. problem with the computer's PRAM - see reset the PRAM and NVRAM on your Mac.

  b. boot, directory of the drive has been corrupted - repair with disk utility.

  c. critical system files are corrupted or deleted - reinstall OS X.

  d. the hard drive is physically non-functional - replace the hard drive.

  Please note that the information I have provided is what Apple recommends, if other users will suggest different solutions found here, then be sure to what they recommend has no impact on your ability to get the Apple continuous service guarantee, if any.

  Please do not start remove disks or change cables unless you know what you're doing and have exhausted other alternatives non-invasive described here. If you perform all knit yourself which is not approved by Apple, then you will void any warranty you can have and lose any other Apple support.

  Fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  The main difference if you use Lion or Mountain Lion, you must first boot from the boot Recovery HD simply HD recovery to perform the foregoing.

  Reinstall Snow Leopard without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  Relocation of Lion/Mountain Lion without erasing the drive

  HD recovery start: , restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select the Recovery HD and click on the arrow pointing down.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu.

  Reinstall/Mountain Lion Lion: Select reinstall/Mountain Lion Lion and click on the button continue.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

• Satellite P300 - - what are product recovery discs contains Vista?

  I want to reformat my laptop, it's a Satellite P300... many things does not work more IE: System Restore and corrupt c drive

  (1) would be to reformat my laptop to fix those problems?

  (2) 2 discs "TOSHIBA satellite p300 etc. product recovery media and 64-bit windows vista ulimate said.

  Is that mean they contain vista? (vista came pre installed

  (3) should I make a copy of the PRODUCT ID series vista on my system menu screen

  (4) how would these discs...

  I you thankful if you could help, its a super computer

  Conduct research on how to operate the discs, just want to make sure that they contain vista

  > 1) would be reformatting my laptop fix these problems?
  Probably yes

  (> 2) 2 discs "TOSHIBA satellite p300 etc. product recovery media and said windows vista ultimate 64-bit.
  As far as I know that P300 was equipped with HARD drive recovery and Vista 32 bit was preinstalled. There should be an option that allows to recover the laptop using the recovery of HARD drive option. Press F8 when the laptop starts up. Then choose fix my computer and start HARD drive recovery.
  This should set the machine to factory settings. Finally, you can create a recovery disk using the Toshiba recovery disc Creator called preinstalled software.

  (> 3) should I make a copy of the PRODUCT ID series vista on my system menu screen
  You can do this, but as far as I know the Vista on the Toshiba Recovery disk is already enabled and you don t need the series keys.

  (> 4) how would these discs...
  Usually you have to boot from that disk

  PS; For more details you should read the user manual and must read the discussions in this forum!

• Windows Vista player - D labelled "Recovery" what is its purpose? Why is it complete?

  This computer is 3 years old. Until recently, the D drive was essentially empty. Now, it's almost filled to capacity.

  Hello

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

• License Photoshop and Lightroom CC El Capitan compatibility and recovery after reinstalling

  Hello

  to avoid loss of license, I would like to know what is the correct procedure to ask if I have to clean install El Capitan on my Mac to restore my Photoshop and Lightroom cc license after installation and are compatible Lightroom and Photoshop CC with El Capitan?

  Thank you

  Hello

  In the event that you want to reinstall the operating system and to the CC, you will not lose your CC license, you will be able to re - download.

  You can download the installer for Creative Cloud from here:
  Creative cloud help | Creative cloud desktop.

  After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications

  You can have the creative cloud installed and signed in on two computers as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software. Sign on a computer that should not be used: log in and log out of the desktop Adobe Creative Cloud application

• Where are my recovery files are?

  Help! First CC 2014 running and I've added a page on one of the files of my book, which sent a cascade of updates of the page in all the files in the book, which crashed ID. When I restarted, thrown 31 file recovery program, even if there are only 10 records in the book. And I couldn't get stop turning this beach ball.

  I think that the best thing to do would be to blow up all the files recovery. But since the Mavericks, I don't know where they are. Where are they?

  And is it too late to go back to plain old CC?

  You can download InDesign CC from CC desktop application. On the applications tab, scroll down until you see the filters & Versions.