Disk utility: delete process has not

Similar Questions

• Disk utility 15.0 has no way to stop the first aid

  On OS / X 10.11.4 on a MacBook Pro for mid-2014.   Utility disk 15.0 (1511.3).   But I've noticed this for a while.

  Once I start first aid, disk utility appears a small dialog box modal ["first aid running on '... "] of which there is no evacuation - short to kill the process, unplug the drive, or restart the machine.   This was not the case before an upgrade months ago.

  Since first aid on the large disks, in particular connected by USB 2.0, can take a long time, it's very embarrassing.

  All three exit opportunities (kill, remove, reboot) do not seem to run the risk of leaving the disk in a bad state - which is exactly the thing running first aid is supposed to solve, no question.

  Does anyone have any suggestions?   Or can direct me to the right place to submit a bug report?

  Thank you

  Larry

  Does anyone have any suggestions?   Or can direct me to the right place to submit a bug report?

  Feedback: Apple http://www.apple.com/feedback/

  Bug Reporter https://bugreport.apple.com/

  Hope this helps Larry

• Why my process has not worked

  Hello

  My request Express 4.0.2.

  I have a button 'SUBMIT' in the region and I create an after Submit process 'update_data', I'm sure that my code is correct and I put my condition of process when the button pressed (process after Submit when this button is pressed) as SUBMIT (submit), but when I click on the button 'submit', does not run the code, I don't know what the problem is. I did a lot of operation like this before and it works perfectly, I need your help!

  Thank you

  Lila

  Hello

  If your data is not being updated, he doesn't want the process is not triggered. You might have a bug in the code.

  If you do not have the branch that fires after the process, the success message will not appear.

  In addition, you must check include the message option for success process in the industry.

  Kind regards

  Jari

• RMAN delete policy has not worked and not delete outdated backup

  Hi all

  I am facing a problem this obsolete backup is not delete unwanted backup.

  I used to take level 0 once weekly and cumulative incremental in 3 times a day.

  I have 2 TB hard drive, every week, I used the backup from command remove obsolete based file can delete based on my redundancy strategy 1.

  The previous week it works fine and deleted obsolete backup based on the deletion policy. but this week when I try to use the delete obsolete command, it is not removed and the hard drive is always full and I couldn't take later backup.

  It's live server, I need to take the free space on the hard drive. Please help me.

  You will find details of error that I met in the log file.

  output channel: C1

  output channel: C2

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of backup so archivelog command at 05/05/2015 10:57:14

  ORA-19502: write error on file 'G:\RMAN\AWSPROCESS\BACKUP\AWSPROCESS\BACKUPSET\2015_05_05\O1_MF_NNND1_TAG20150505T090032_BNJGC9RR_. BKP", the number of block 7227648 (block size = 8192)

  ORA-27070: async read/write failed

  OSD-04016: error queuing an asynchronous i/o request.

  S/O-error: (OS 112) there is not enough space on the disk.

  Your backup on May 02 is not a valid backup, then you can try something like:

  RMAN > delete database backup completed after 'sysdate-6 ";

• SSD does not appear in the disk utility when you try to reformat the MacBook Pro

  I'm trying to reformat my Macbook Pro (mid-2012), because I had the folder with a question mark by trying to turn it on. Once I started the recovery process online and open disk utility my SSD does not, so I can't delete it or reinstall the OS. Any help would be appreciated.

  (Since 1) isn't the SSD with the disk utility program and 2), you get a folder with a question mark when you initialize I would say that your SSD is dead. Unfortunately, probably looking to a visit to your genius of Apple.

• Alternative to disk utility?

  Disk utility El CAP is severely paralyzed.  So many things are either missing or not friendly.  I'm talking about the GUI disk utility.  I know that you can always do things in the command line (terminal).

  I'm not talking about be able to check and Fix permissions.  It was convenient, but this isn't the only thing missing.  Many bases are messy.  You can't resize the window or column.  It makes you think, perhaps, that you can, because you can place the cursor and try, but it doesn't do anything!  You're stuck with a column where you don't see the full name of discs and if you have a long list, you should continue to scroll down.  It's so frustrating.  You must be able to resize these things.

  When I upgraded to the start, I made the mistake of trying to partition my hard drive (I had done many times in the Mavericks all the way back to snow on another machine).  Well well, after this debacle, which yes - 'green' user error, I had to get a merger encourage education!  Without the Debug menu, you don't see all the partitions on your drive either!  The sector of partition was easier to understand the circle which bounces and is hard to even type a number in the box. It also makes those of us with CD/DVD drives to redouble efforts to do the basic things.  Thank God for a few good 3rd party apps that make it easier / simpler.

  I searched around, and it seems that some people re - install Yosemite disk utility.  I am not experimenting quite that far.

  So good another program essentially useless included Apple they probably let die instead of fix.

  So my question: is another type of GUI utility disk program out there that can be used?  More importantly, one that works similar to the old disk utility.  Just a simple little utility app?  Any recommendation?

  Please, I understand that I can get a large number of functions using Terminal Server.  But I don't want to do the things that I used to be able to do in the GUI.  Thank God, I can learn to do, but some people should not have to use the Terminal.  This is not a post on how to do a certain function.  I just want to know if anyone has found an another disk to GUI utility.

  Thank you!

  Soft Software Raid, but I don't like not third. I keep a Mavericks and a volume of yosemite at hand starting and use one or the other.

• Today my Macbook Pro could not start.  He showed me the ban or no symbol.  I was able to access disk utility and run first aid on the SM0256G of SSD Apple media successfully.  Cannot start in normal/safe mode.  Should I delete/install so I can?

  MacBook Pro 13 '' end 2015.  256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start.  The progress bar with the Apple Logo would be present but would end not showing the symbol «»  I tried to boot mode safe - no go.  I have not reset PRAM help.  I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup.  The utility show me backups however when I would go to the next screen and no backup is available.  Disk utility displays the SSD.  Can I erase the disc and download OS X install?  Thank you.

  At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.

  You have already run disk first aid.

  Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.

• Drive external hard Mac has shown in the past but does not now show in disk utility. How can I get it back?

  I'm going crazy trying to find an answer to this question! My external hard drive has shown in the past but not now shows in disk utility. My OS is X El Capitan.

  I tried to turn off my computer then unplug my external hard drive waiting for 30 seconds back on my computer and plug my hard drive with no joy.

  I hope someone can help.

  Hi willy of San Jacinto.

  I understand that your external hard drive is no longer seen by your computer. I know it's important to have a good backup location, and for that to work, I am so happy to provide assistance with this.

  Read this article on troubleshooting USB devices:

  OS X El Capitan: If a USB device does not work

  If your computer is yet to see the hard drive after following these steps, it would be interesting to test this drive on another computer if available. If you continue to have problems, I suggest contacting the manufacturer of the hard disk on a hardware failure possible.

  Thank you for using communities of Apple Support, cheers!

• Windows 8.1 with Bootcamp installed in El Capitan. Do not delete with Bootcamp so I used the disk utility. Now, Windows always tries to start with an error, the 'other' space illustrates.

  Long story short, I installed windows 8.1 using Bootcamp, went very well. I was just curious how it would go.

  in any case, tonight, I decided to delete the Windows partition (Bootcamp Partition), and I got an error in Bootcamp that says "sorry couldn't do Mac OS partition a new»

  With that I went to the disk utility and tried to partition the disk on a partition again, which it did, but now I have 40 GB of "other space". I literally have nothing stored on this computer, until I installed Windows 8.1 which was not there.

  Also, when I start it up I always get Windows start first if I do not hold Option, then it goes to the blue screen, obviously because he's not here.

  I started to recover, tried to fix it, verify, erase free space, etc.. I'm running a MacBook Pro 13 "128GB 2015.

  On a Mac of 2015, the disc is divided into a group of logical volumes and Volume for OS X, and a partition for Windows. If BCA fails to restore it correctly, the part of Windows do not get properly gathered in the LVG/LV. The other questions you have, it's that there are remnants of the Microsoft your EFI partition Boot code.

  To solve both, the easiest and safest method is

  1 backup OSX and all of your files - use Time Machine to back up or restore your Mac - Apple Support .

  2. boot into Internet recovery (CMD + Opt + R) - OS X: on OS X Recovery - Apple Support .

  3. click on Utilties-> disk utility and erase your entire internal drive.

  4. restoration of OSX and your files - use Time Machine to back up or restore your Mac - Apple Support .

  This requires another external drive that can accommodate TM backup - backup disks that you can use with Time Machine - Apple Support .

• I started the disk defragment the task, but it has not completed the process. He just continues to run.

  I started the disk defragment the task, but it has not completed the process. He just continues to run. I let it run for days and nothing don't past he never stops running. What should I do to get this to accomplish the task?

  Hello

  Take a look at my responses to a message here...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/defrag-has-been-running-for-5-hoursshould-it-take/3f45c33e-08f3-4885-86a7-b5bbfe152dab

  Concerning

  GT4U

• Failed to process first aid disk - utility

  I've been running into issues with my iMac, as random freezes and stops at random times while doing completely different things. I thought that I've narrowed the problem to a USB hub, but it crashed on me again once the other day. Without apparent reason, everything stops in response, trackpad unresponsive, the music stops, and in a minute it stops and restarts itself. The behavior is unpredictable and completely random. Sometimes I can go for a few weeks, sometimes it will happen after reboot later. Super annoying, especially since I never had this problem with my 2008 iMac.

  Recently, I had a lot of beach balls in the Finder of spinning. Sometimes I can wait it out, sometimes I have to restart completely. I tried to reinstall the operating system to reset the PRAM, removed all devices, started in Safe Mode, all without success.

  The other day I tried to launch disk utility to repair permissions, but I get an error message: "first aid process has failed. Save if possible data on this volume. "" "The operation could not compete. (Cocoa error - 1) ». Not sure why this is happening. I wonder if it has to do with my problems eventually? Any help would be appreciated. Thank you.

  Run the Apple Hardware Test.

• Samsung EVO850 plus disk Util is not smart

  HI -.

  I have a MacBook Pro 15 "late 2011, for which I bought a 1 to Samsung EVO 850 SSD."  I want to replace the internal MacHD with the SSD.

  I have the external SSD drive hooked to the MBP using a StarTech USB2 for SATA docking station.  Using disk utility I erased the SSD and reformatted using OSX journaled Extended.  The process took seconds to complete.  However when I check the S.M.A.R.T. status on the SSD TO THE shows 'not supported '.  Also (probably part of the same problem) - if I try to restore the MacHHD on the SSD I get the message "the restore process failed" and "volume of the Source is read-write and cannot be disassembled, so it cannot be copied from block.

  -What is the problem?  I don't know that this EVO 850 is compatible with this MBP.  Disk utility is quite simple.  But the result is not SMART.  Did I miss a step?  How can I reformat this SSD to support the Smart function.

  TIA your entry,

  Josh

  -What is the problem?

  The only thing wrong with what you mentioned is your understanding of it. everything works as expected.

  I have the external SSD drive hooked to the MBP using a StarTech USB2 for SATA docking station.

  in general, docking stations, in individuals and external drives do not support SMART status.

  Smart seemed like a good idea when it was invented, but it fell away, far from being useful. It indicates usually that your reader has a hard time AFTER that the car exploded. Or he reports that your drive is about to die, three years before his actual death.

  If I try to restore the MacHHD on the SSD, I get the message "the restore process failed" and "volume of the Source is read-write and cannot be disassembled, so it cannot be copied from block".

  You cannot copy the Volume Mac OS X is running to use the copy of disk utility that is on the Source Volume. Disk utility insists the drive mounted, so that no one else has the ability to change the contents of the disc while you are copying. You can't unmount the disk because Mac OS X is started from, so you cannot copy the path you want.

  If you want to make this copy, start under Recovery HD (which is another partition on your boot drive) and use the disk utility it. Then you can copy the Mac OS X Volume (but not the Volume of recovery HD, because it will be busy.

• Disk utility says Everything is Fine, when it's not

  I am trying to understand what the point of disk utility. I checked (several times) my boot drive (SSD) and a second internal HARD disk, disk utility says it all goes well and nothing in need of repair. Meanwhile, I can say drives are certainly * not * ok since I get poor system performance, and the HARD disk is sprayed randomly when I access/copy some files.

  I went and got the SMART utility and Disk Warrior, SMART utility written my boot drive is FAILING and my HARD drive has FAILED.

  I am now under DW on it, but I'm pretty annoyed that utility disk is essentially useless to see if there are problems with the discs...

  Disk utility and disk warrior can only repair the files in the directory, they are unable to repair a disk that is physically / mechanically failing.

• My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

  Hi Apple/community,

  I need a help.

  What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

  

  Any help will be greatly appreciated. Thank you!

  Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

  Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

  If it works, try to repair the disk with this command:

  fsck -fy

  (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

• external hard drive is not displayed in disk utility

  I have a drive (2 TB) seagate desktop external hard, while the backup time machine HDD power adapter was pulled from the socket. Now the hard drive is not recognized (both on the utility disk and office) of my mac pro book works on os x el capitan, seeing the hard drive is disabled, but I can feel and hear the operation of the hard drive. Also when I hang up my iMac running os x yosemite on the hard drive can be used and seems to work very well.

  I tried to reformat the hard disk, but it has failed it is still not recognized on my mac pro book

  Hello amartnez,

  Thank you for using communities of Apple Support.

  From your post, I see that your drive external hard seagate was pulled from the socket during backup with Time Machine, and now it is not recognized by your MacBook Pro. I know how it is important to ensure that you are able to connect your external drive to your Mac. I have something I want you to try.

  Because the external hard drive seems to be working on another computer (iMac), please try a different USB port on your MacBook Pro and see if it recognizes the external hard drive on the desktop and in disk utility. If so, that means you have a problem with this specific USB port on the MacBook Pro.

  See you soon!