Disorders of the IdeaPad Y570 sleep/hibernation
Hello everyone: Lenovo customers and the team.
About a month ago, I've got Lenovo Y570 (i7 of second generation, 8 GB RAM, 750 GB HARD disk and so on).
In fact, I am satisfied of this laptop, but here's a very boring question - disorders of the sleep/hibernate.
I installed Windows 7 x 64 Ultimate instead of original Windows 7 Home.
Then I installed all cooler Windows updates (SP1 and all others until today) and all updates for everything (drivers) from lenovo.com
The problem is:
(1) sleep mode - when it happens, if I interrupt bit - 5-10 minutes, everything is OK, awake computer. BUT if it stay for long - about 20-30 minutes, when I come back I have meet BSOD with message 'something about power. " I have dumps, if it is necessary.
(2) hibernation. Each second hibernate leads to-screen sets out of State, formerly the powerfully flashing and then just nothing, computer HARD drive-based stay with black screen, all of the lights on the Panel WE still, power is always on and I can't do it-just to turn OFF with the round power button press.
I tried all the possible solutions - to use power settings, hybrid sleep and hybrids, all modes, all solutions of the internet and my own mind - without success.
Prior to Y570, I've owned Y530 and same configuration of Windows 7, etc - it has no problems with sleep/hibernate implementation.
Please help me with this?
Thank you for attention
PS You forgot to say! Sometimes, when I use hibernate - laptop is in hibernation, but shortly after turning off the power - it's on (after 1-2 seconds of the OFF state). Yes, I've checked everything - off set "Wake up" function of each device excluded just keyboard, leave all possible wake timers and so on.
Tags: Lenovo Notebooks
Similar Questions
-
Sleep with the Ideapad S10-3 problem
A week barely returned this Ideapad S10 - 3 to the initial state to overcome a problem with mode 'sleep', which has recurred just - worked well in sleep for a few days then back to this question - that's why this message - when I put the netbook to sleep by closing the lid, 2 left lights on the left front light & the system stops responding - only by holding the power button down to kill the system then by restarting the system that reboots can sleep (I put the hybrid sleep system on) extended is the problem solved.
Ideas to make the system normally sleep?
Hi pday12au,
If you are running Windows 7 and Windows Update received before the problem, you can try to perform a system restore (click Start > type System Restore) and disable windows to automatically receive updates (click Start > type Windows Update > choose change settings on the left sablovaseuse) then watch the PC.
If your system is entirely through Windows Update before the problem, try to apply this "standby" difficulty.
I hope this helps.
-
I guess that the problem occurs when each device goes into sleep/hibernation because this is happining to only my external hard drive and printer. All other devices connected by USB have never no problem and will not go to standby or Hibernate. Difficulty I should close down then cold restart without connected device. then after the system is installed and running reconnect the device then it is recognized and works. I tried to just the printer powerdown (cables power and usb for printer peripheral but comp still running while still not recognized after that repower printer and then usb connection get 'unknown device'.) The only way to obtain a recognized device, DHM or printer is as above full stop and then reconnect. Any help would be greatly appreciated because it really is a pain and has cost me a printer that I threw out the window, luckly the window was open. Thanks again for your time and your help very frustrated JK
Hello
1 have had any changes made on the computer before the show?
2. do you get an error message? If Yes, what is the full and exact error message?
Method 1:
I suggest for the link and try to run the Troubleshooter:
Tips for solving problems of USB devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
Method 2:
Try to update the device drivers and check if it helps:
Updated a hardware driver that is not working properly
Check out the link for more information:
Looking for drivers
Method 3:
I suggest you to disable and re-enable the USB controllers:
a. click Startand then click run.
b. type devmgmt.msc, and then click OK. Device Manager opens.
c. expand Bus USB controllers.
Note: You need to scroll the list to find this point.d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.
e. Repeat step 4 for each USB controller is listed under Bus USB controllers.
Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
Let us know if it helps.
-
My DELL Inspiron is for disorders of the Windows 7 Hibernation comiong!
It's a DELL Inspiron 580, office, since 2010, yes an antique to the extent where computers are concerned!INTEL Core 2 Duel.I ran DELLS hardware trouble shoot app, everything checked OK, memory, processor, etc.Running Windows 7 Home Premium.I have AVG Free.I have and you are running at least once a week:Reg Cleaner EusingC CleanerMalwarebytes.
When the computer goes into hibernation mode it has a VERY hard time out!
The Inspirion flashes it is seeing power on in case of sleep hibernation. You should be able to hit any key and get him out. When you press a key, I use the SPACEBAR, the fan turns on, as is the fresh start! Somehow, it gets lost, I have a black screen. So that my computer get going, I have manual press and hold the power button for a few seconds, then he's trying to start up. He eventually finds his way. The populous deshtop appears, but it is still confused. The power light flashes!
So I move the mouse on and close it, it takes a while, I get a warning about programs in the background need more time to stop, it ask if I want to force the closing down and I do not have!
He stops, I start it again, it works like nothing happened? !!
What gives?
I know it's a common problem, I see it mentioned anywhere, but no easy solution for her!
Help! Ted
Is go to the good old Download.com, downloaded Driver Booster, the updated drivers 13... Count'em, 13!
Computer is much faster and... hibernation problem solved!
YES!
Thanks in any case!
-
Satellite X 200-219 hang up the wake from sleep
I got my satellite X 200-219 since April and he always showed the following behaviors but lately seems to have worsened.
If I do nothing else that to stop completely the laptop after using it, the next time that I start it, it crashes some short but apparently random time after.
I've never managed to imperically my theory, but it seems that there is a point of the catchment area about 15 minutes after what will be the shot, if I close the lid let sleep and then reopen it will probably be authorized, if however I turned off and make a cup of tea and open my back it is likely to crash. A power cycle and restart with the prompt "unexpected shutdown" was then held after the machine will be perfectly happy.
I tried to use performance and error tracking tools to identify what is happening but to point out, nothing is connected, and I think that all who had not been emptied to disk is lost. I got it down before the opening of the session/finger drag but also I got most of the way by the, horribly slow, the boot process.
I tried a number of other things, the upgrade to the graphics drivers, bios etc disbaling Aero, and all sorts of other features all without success.
I am now at a loss as to what I can do next and don't really have any new ideas as to what may be the issue.
Anyone got tips? Someone at - he seen this before?
concerning
NeilHello
I m no owner of an X 200 Satellite but I noticed hibernation/sleep problems on my laptop Vista too.
For example my screen remained empty after waking from hibernation.
I could solve it by the BIOS and update the graphics driver.Other problems have been resolved after installing some patches and Vista SP1.
You never recover your laptop computer with the Toshiba Recovery CD and checked whether the hibernation issue has not changed?
The fact is that a lot of problems is related to a BONE of garbage and the registry. It occurs due to mounting and dismounting 3 different third-party software.I always use a free tool of CCLeaner. It cleans my OS and fix if necessary registry entries.
Unfortunately, I can't post an exact solution but perhaps tips could help you.
-
Satellite C855-2HW guard go to sleep / hibernation
I have a Satellite C855 2HW and it keeps going standby / hibernation.
I put everything as maximum performance and never to Hibernate, but he remains in hibernation.I do not use the Eco utility (it is off).
My power cable is attached and I have it configured to never blur the screen, never the stop screen and never go to sleep mode.Even in settings advanced of the I told him never to stop the drive and 'never' for all the options standby. The rest is all about max performance.
I do not understand why it goes into hibernation after a few minutes.
When I play a movie or something on youtube, apparently not go into hibernation.Any suggestions what to do?
I've posted it here, because I couldn't find myself and thought that perhaps eco utility is always do something to reverse it?Hello
Could you please post information about the system you are using?
Using Win 7 or 8 Win? As far as I know it was pre-installed with Win 8 64 bit. Is this good?
When exactly the laptop going mode sleep?To my knowledge there are no many options where the Hibernate mode can be configured.
You can set up sleep auto/upgrade the system hibernate mode in Power Options.
(Win, x key-> power optionsThis feature automatically stops the system in sleep or Hibernate mode when there is no input or material of access for a specified period.
Also, there is an option called automatic low battery hibernation mode. When the battery is depleted to the point that your laptop operation cannot be continued, the system automatically goes into hibernation mode and turns off.
Finally and above all specific aspects of Power Options containing the Hibernation mode and the mode 'sleep'.
-
IdeaPad Y570 fan works not properly
Hello
The fan on my IdeaPad Y570 suddenly stopped marketing. It does not spin regardless of the temperature, and therefore, the temperatures reach 90 C +. Mode of dust collection works very well, the fan turns as expected for the cycle and seems normal. If the fan is not physically broken or clogged. I also installed 3rd party software CPUID HWMonitor to check if temperature sensors work, and they all show temperatures at levels expected and more than high enough to warrant coming fan.
I don't think that I have installed a new software that might interfere with it. I tried to reinstall the Lenovo Energy Management software, but that did not help. I also tried from the laptop in safe mode, without result.
Thanks in advance for any help you can provide.
HWMonitor screenshot:
Applied Windows updates and this problem is solved. Hope this helps others in the future.
-
Lenovo IdeaPad Y570 restore please help
Well so my Lenovo IdeaPad Y570 has recently suffered some physical damage while on and did serious damage, HARD drive and I was forced to replace it. I was under the impression that OneKey recovery system was a full on-board catering and didn't know it was the basic hard disk. I seem to have misplaced the recovery disc supplied with my notebook, so I am running low on options. If anyone has one they would not mind selling for me (if is not invalidate all guarantee/agreements) would be great. Reply to this thread so any help or answers.
@HelpMeOut,
Please contact technical support to for the disc OKR.
-
Problem Lenovo Ideapad Y570 OKR
Hey guys... I have a series boring problem
I have as I said Ideapad Y570 Core i7 etc... I installed Win7 Manager and I met a wired problem, so I used the Center Manager win7 den 'den all the components of the system. "
I did the Lair of all components of windows outside microsoft and also hidden files
then I started to deal with the 'death' blue screen, so I decided to get my windows.
I chose the OKR who requested a reboot... but it does not connect the recovery environment... tried so many times but nothing did.
So I created the dics of recovery which were 3 DVD... to the factory default settings... then I started from the first DVD, but I will stop when the screen is black and loading with a setting "windows loading files.
I tried to uninstall and reinstall the OKR but nothing happened.
Please help me to recover my laptop for the default setting!
-
Lenovo Ideapad Y570 Touchpad 'Tapping' question
Hello
I just bought ideapad y570 and its been fine, but after months of use it my touchpad does not work as it was before.
I noticed that when I tap on it, it does not select anything on my computer. It moves and everything but when I try to choose anything, it does not.
I already have FN + F6 and it did not work.
How can I remedy this?
Hello
your synaptics touchpad driver is installed?
If so, you must modify the settings for hardware-device manager and printers-mouse. After the opening of the properties of the mouse, go to the "Device settings" tab and click on settings. After that, you will need to open the "Tapping" page and enable it, if it is not enabled.
If you do not have the driver installed, you can download from the link below and do the same things as above, if the problem persists. just chose the right operating system
-
Unable to resume the computer from sleep mode
Original title: monitor going to sleep then will not return without tapping computer power button. used to click just a key
This monitor goes to sleep. have a very hard time to bring. used for any key just click and the monitor lit up back. I must now press the power button to turn on. This may turn off the computer.
Hi Larry Lane,.
· What version of the operating system is installed on the computer?
· Have you made changes on the computer before this problem?
Follow the steps in the article.
The problems of wake the computer from sleep mode
http://support.Microsoft.com/kb/266283
For reference:
Sleep and extended: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
-
Windows Vista hangs after the release of sleep
I am using windows vista 32-bit edition Home premium. My laptop freezes resumed after having been dormant for a long time. The problem started after I reinstalled windows and started the update of windows.
Hello
Troubleshooting Windows Vista sleep and extended
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686May need to reset all to default power settings and then place back as you prefer.
How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlMay need to reset all to default power settings and then place back as you prefer.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time. What can I do?
Press CTRL + ALT + DELETE and bring up the Task Manager > move in process > select Explorer > end task and it will restart and if all goes well it will bring to the top of your screen properly.
Your computer is completely up-to-date with all the updates?
Note I'm not a fan of setting hibernation or sleep a computer there, it can sometimes lead to problems (as you see)
I hope this helps.
-
What is the best way to disable Device Manager to correct the State of sleep in Vista
I understand that the box peripheral to allow my PC Manager stay in State standby, as suggested in the help of the VICTORY of compensation
could fix my PC, but there are 16 listed different USB files and I don't know if I should delete all.
I erased the CB modem but the PC wakes up from his sleep in a min. after clicking on sleep. Any help? Thank you
Hello
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------
How can I enable hibernation on my Windows Vista computer?
http://support.Microsoft.com/default.aspx/KB/929658
How to reactivate the lack of Hibernate Option in Windows Vista?
http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/-------------------------------------------
Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
similar are not enabled.Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
type of hibernation - see turn Hibernate on / offAll the default power plans and then set them as you wish.
I hope this helps.
-
How to turn the computer back at the office after sleep?
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: this is the 1 time I use the function slee...
- I don't know how to get back on the desktop after using sleep.i cannot find any button to return, as seen as running off.whay should I do...
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
Usually just move the mouse or using the keyboard wake it.
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------
Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
similar are not enabled.Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)All the default power plans and then set them as you wish.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Updated BIOS for mid-2010 MacBook Pro?
Cannot get my MacBook 2010 mid Pro 13 "to recognize the new 3 TB Western Digital My Passport 3 to. Execution of Yosemite and noted topics such as this one with Yosemite and a variety of HDs external on the internet. No problem with the previous 2 TB
-
How can read the version number form an exe
-
The two systems of OS Win XP pro work fine, but I think it's the cause of a lot of "Report Error Messages" Ms
-
How the terms on average 'sandbox' & "Briefcase" of Vista?
find the programs that are running in the taskbar [bottom left] who are "running in the sandbox"... What is TheSandbox?... also when I choose to do a new folder I see "Briefcase"... which is TheBriefcase?... What do [sandbox/portfolio]?
-
. I need a little help. Got a laptop from a friend, Compaq PresarioCQ-60. Small fast machine, or it would be. It is only 3 years. Good, came with VIsta. No problems. Chris bought a Windows 7 upgrade. Installed, has no auth key/OS (which is not the pr