Display Dell Feature Request Manager: ability to associate an ICC profile preset and automatically switch

Similar Questions

• Display Dell Feature Request Manager:

  Hello, I use 3 monitors Dell U2414H in portrait as a single large (virtual) desktop. The monitors are combined at the level of the configuration radeon driver. In this way the combined monitors will also work as one in 3D mode full screen.

  To work comfortably in the windows environment I use the monitor from Dell software, which allows me to ride comfortably windows in one of the 3 monitors. I use one of the standard presets for this (always the 3 preset column).

  I'm glad to DDM, functioning, except for the 2 questions that keep "" annoys me:

  SITUATION 1
  ==========

  Whenever I restart the PC, I've choose the 3 column preset which seems a bit odd as DDM starts automatically with windows.

  REQUEST 1
  ==========
  Is it possible to make this persistent? to restore the desired preset would be very convenient.

  SITUATION 2
  ==========
  By default THAT MDD will resize hung out windows to the size of one of the region such as defined in the chosen THAT DDM preset. In my case one of the 3 columns. To cancel the CHANGE button can be used by dragging. It is a practical solution. HOWEVER: This behavior also applies to windows within the Application of Multi specific documents, such as MS ACCESS. (Interestingly enough this is not the case in MS EXCEL.) Apparently, these applications use different triggers)

  An example: MS ACCESS opens up to the total size of one or more DDM in the region. When you design a query the various tables will be displayed in the form of small windows on the design canvas. These table-windows will be dragged trigger constantly DDM to resize the window of the table to the size of area DDM. Of course, the design area is less thus triggering MS ACCESS to resize the design drawing area and reposition the window outside the visible area. To cancel what you have to scroll to the right of the canvas, resize the table to the original size window and drag it to the original position by hand. And to maintain the SHIFT key for not having to do it again anywhere.

  Of course the SHIFT button must be pressed in the first case to prevent this from happening, BUT (and it took me a while to figure) pressing the shift has a delayed effect. I use the SHIFT button and it still happens. It seems that you have to wait for DDM show a yellow framework before releasing when you drag. The delay has a duration unpredictable way makes it impossible to prevent this from happening. And also, it is easy to forget. This behavior makes DDM use in this situation not only embarrassing, but actually really boring and tedious to restore these windows table.

  I tested in MS ACCESS 2007 and the latest version of MS ACCESS (OFFICE365). And I'm sure other applications that may have the same problem.

  REQUEST 2

  ==========
  DDM adapt to is NOT (or do a configurable setting persistent) Resize Windows in windows as described in the example of MS ACCESS?

  I hope that these two request are interesting for other Dell users as well and help DDM even better value.

  Kind regards

  Eduard.

  Thank you Cris, I and I got this blazing fast answer:

  =======

  -The question MS MDI is an oversight of access, which is easily fixed [Red: he gets out in a next version]

  -Instead of use SHIFT to cancel a resizing easy organize, invert the logic so that you have to hold down the SHIFT key for * participate * a resizing of EA. If you are comfortable editing the registry, try to add value 'Kbfix' to HKEY_CURRENT_USER\Software\EnTech\DDM and it 1 (dword). Then restart the display Dell Manager.

  =====

  The inversion of behavior SHIFT through the registry works really well. It seems to me more intuitively and I'll keep this setting.

  For those who would like to try themselves and are not familiar with the registry:

  1) go to windows - start

  (2) search for "regedit."

  (3) to collapse the tree and follow the path: HKEY_CURRENT_USER\Software\EnTech\DDM

  (4) right click in the window of right and make NEW + DWORD

  (5) give it the name "kbfix.

  (6) open it and place the value 1 in the editable field

  (7) output DDM (right click on the icon on the windows toolbar)

  (8) use windows - start + search "display".

  9) click on 'Dell Display Manager'

  10) enjoy the ride :-)

  * You can cancel the effect to change the value of kbfix and again 0 (or just delete) then by restarting the ddm again.

  * restart the computer or the newspaper took off again also restart DDM.

  Cudos to entech!

  See you soon,.

  Eduard

• Display Dell Automated installation manager

  Hey all,.

  So rather than manual update or install the display of Dell Manager, I would like to automate.

  However as yet the installation parameters are unknown for me.

  What parameters are available for this monitor tool during the installation/uninstallation of the software?
  The least it would be useful to know the installation in silent mode option.

  Thank you

  Try

  ddmsetup.exe / / Silent

  and/or

  ddmsetup.exe /verysilent

  And the parameter ' / suppressmsgboxes ' to silent manage errors or warnings, or confirmations.

• OPS matester detail page: how to have a "Display all" feature on the screen, so that all the master records and details are developed.

  
  Hello

  I was trying to get a function "SHOW ALL" on the master - detail page

  the detail table is a table of advancec.

  Please help me with entries on how to make the feature "SHOW ALL",

  Currently, you must click on ': show ' for each record to the master level to display the data of the child.

  Trying to reach 'Show all' then featured on click this key records on the page "expands" showiing master records with respective detail records.

  Concerning

  bhuvanm

  Hello

  You should not set DetailFlag = 'Y' in the whereclause, because there is no such record.

  Also detail flag are transitional attribute and not the query column, hence the error "invalid identification Code.

  I asked you to use DetailFlag as a column of query with the static value 'Y '.

  for example:

  SELECT 'Y' detail_flag

  Of

  This will display all the records in the table in expanded format. If you want conditionally then use decoding on some binding settings.

  For example:

  SELECT DECODE (: 1, "SHOWALL", "Y", "N") detail_flag

  Of

  This connection parameter must be passed each time you want to run the query for the table.

  Kind regards

  Sandeep M.

• Vote on SQL Developer feature requests

  I have been reviewing applications for features and the various statutes, must you always vote on those that are marked as accepted? I guess that Yes to give them more weight to get them looked at earlier? Are these marked rejects NEVER looked at again? What is the difference between those marked open and those that are marked in the expectation of the community Votes? These 2 articles are not the same thing?
  
  
  Thanks for your help.

  Evita,

  Yes, you can still vote on Accepted. (You can even vote for "programmed for immediate release... (', because sometimes you have to pass the characteristics from one version to another)

  Accepted means that it seems possible to do and we can do it, but 'when' has not been established. Please add votes to help this decision.
  Rejected Just that, we have no intention to do so. I don't revisit rejected on the Exchange.
  (However, some features that have been rejected have been discussed on the forum and we have reconsidered. We have also changed to "rejected" to "accepted" on various occasions, but only based on discussions here. Rejected features have very poor explanations of the problem that users are trying to solve)

  Open We haven't read or taken any decision on them.
  In the meantime the community vote means just that. Someone suggested a feature and no one seems interested. With the long list of features, we need to give priority and some requested features are dark, so we want more feedback from the community. More votes and feedback from Community aid. We sometimes get the 10 points of some people and zero for the same function.

  Please note that except for the features open, others we hit and add your comments.

  The problems I have with feature requests is the lack of clarity in the application and several applications described in a single request. Additional features are lost, and others may not vote on them.

  What

• Feature request for Compellent Enterprise Manager

  Not sure that this will be seen by the PTB that this could bring a possibility, but that's. My feature request is around replication, restore points and recovery emergency activation test or real. I would like to have the ability to create groups (maybe even of the subgroups) in this area and assign volumes. When you enter the recovery area disaster activate you can select then a group (or groups) to activate. You could add this to the screen and thus leaves open the possibility of manual selection. Select a group, this would alleviate the need to browse all your volumes to find and select the few you must activate. You would then proceed and EM would activate the volume in this group as usual. Subgroups can be added so that only the volumes in this subgroup would have chosen to activate. Senior level groups would activate all volumes in each groups void assigned to the high-level group. I'd be happy with level groups just top. But I could make a case for the subgroups of level. Thank you!

  Sorry - I forgot to update the thread. I sent this on the product manager, and it was added to the list of queries.

• Feature request: provide the option to display the names of the objects instead of MoRef in the generated code

  Currently, the generated code contains the value MoRef.

  We can't provide an option to display the name of the object?

  ____________

  Blog: LucD notes

  Twitter: lucd22

  Hi LucD,

  Thanks for the suggestion!

  Indeed, it will be very useful. However, its implementation is not trivial. Onyx is currently working as a passive proxy between the server and the client. And information on the names of the objects are not available in SOAP messages. This means that Onyx will generate calls to the server to retrieve the name for help be MoRef, i.e. Onyx will be not only proxy, but also a customer. Despite this us will search if there is a way to implement this or a similar feature.

  I did your suggestion as a feature request in our database, and it will be considered for a future version.

  Kind regards

  Ignat

• Feature Request (new); Adobe Bridge Cache Manager

  In Adobe Bridge, the Cache is still a problem and a huge memory hog. I asked for a good Manager to Cache more than 3 years while it was necessary to CS4.

  Now in CS6, I am disappointed that the cache in Bridge system has not changed. Why do you have a section in the Adobe Forums that asks the "feature request" and then ignore them?

  http://forums.Adobe.com/message/2652688#2652688

  "I would personally like a tool in the bridge that allows me to manage and control the Cache of more personal and effective manner. I would like a rocker that would keep 100% previews"in one folder for a period of time (1 day to 1 month) until the record cache is automatically purged. And an another rocker which would give me the opportunity to preserve permanently cache the selected folder (for example, an Important issue of portfolio or a folder of Images under management).

  As a photographer, I take and edit a large number of photos. When I import a photoshoot with 1 500 photos (not uncommom at all), I have the previews of bridge at 100%, but for only a limited period. Unfortunately, I forgot to serve the individual cache of this file, and the cache relies on a point made very slow Adobe Bridge CS4. I have to then to purge the Cache of the entire bridge in order to make the bridge run smooth.

  Adobe couldn't care less.

  Its sad but true. : (

• Latitude E6430 - Dell control | Power Manager installs in Win7Pr6 arch - 25025 err

  Hello

  I recently bought a Dell Latiture E6430 refurbiished, who came with win7 pro x 64. As I don't have full trust in the seller, I decided to reinstall the OS from Dell (win7 pro x 64-glb Polish) DVD. Of course the drivers detected for my tag are installed (and updated by "Dell Control |") Updated".

  However, with reinstall it I lost the ability to control the way in which the battery is maintained. If I understand correctly, this must be obtained by "Dell Control | "Power Manager". Before you reinstall, it worked. But this app is not detected for my service tag. I tried to install different versions that were available for this model, including the recent

  System - Utilities_Application_3N7TV_WN32_2.1.0_A00. EXE

  System - Utilities_Application_0X5N4_WN32_2.1.1.EXE

  (w32, but both are theoretically "32-bit executables for 64-bit architecture")

  They only moved it back 25025 (unsupported system) error. Any ideas how to approach this problem?

  I suspect that this isn't a hardware problem, as the management of the battery worked before system reinstall.

  Jesse, thank you very much.

  I followed good order during my first attempt, with a significant exception - I don't have dotnet4/4.5/4.62 installed. Otherwise, the installation failed for ' Dell order | Be able to manage"and of"Dell Feature Enhancement Pack"(I have not installed one on the other, I know that they compete. I tried the latter as the first failure in the manner described - error 25025).

  I drove back to the installation of the provider (backup turned to be useful) just to find out that I have a laptop with DFEP installed, and it is this package that provided control over battery scenarios.

  So with the new installation, I've got dotnet installed, after ' DC | PM"always failed with the error 25025, but installed DFEP ok by" DC | Updated".

  It is now resolved :-)

  TLDR: to get a control over battery scenarios, first install the bios update + chipset + network drivers, and updates of windows including dotnet 4 + 4.5 + updates, then "Dell order | Updated"+ updates detected driver, then in ' DC | Updated"display all updates and install"Dell Feature Enhancement Pack Application".

• Smart Actions App / Feature Request

  Great job on a motorcycle on the Smart Actions approx. better than spend $$ on some third-party app.

  Feature request: I would like to be able to settle only for 3G and 3 G/LTE.

  I couldn't find this feature available (only the control ON / OFF cellular data), but I think it would be beneficial to have the ability to automatically control between 3G and 4G. For example: 'Use 3G only when the screen is off', rather than be connected to 4 G when you do not use your phone. It can also add in some configurations of smart creative action as well.

  Excellent comments!

  Please continue the discussion here.

  Will lock this thread similar to consolidate your comments in a single thread.

  Mark
  Support Forums Manager

• Is Container::borderRadius a decent idea for a feature request?

  Before that you think (or probably you have already done) to suggest the 9-patch scaling, allow me to clarify my situation.

  I have controls that scroll in a container. I use an absolute provision and manage key events to make the scrolling. The same situation is if the container is set to any mode of scrolling in no more. Controls that are the object of a scroll are ImageViews, it is impossible to achieve by a substantive ruse. A masking approach, displaying a picture above the container and make transparent holes in this 'false' if necessary, is not a very effective in my case option, because I resize the container on some touch events, which makes it necessary to update this image on each of these touch events, which is very expensive in CPU cycles.

  I need the container to clip the elements it contains, giving a round border appearance. It has been suggested to me that in Java, it is possible by hiding the bitmap to the window, but this feature is not provided by Cascades.

  So, basically, you should post a request for such a device?

  I have not found a need for it and I don't know how many application developers want to play with the default layout and spacing of standard items - consistency is appreciated by the users.

  If you need it and may be useful, maybe it is. If so, you could add a feature request in Issue Tracker, if not perhaps wait until you have a good reason?

  Stuart

• Impossible to apply an ICC profile to display. can not understand instructions for color management

  I just upgraded again own computer with Windows7 from my old XP machine.  I have icc profiles for my two monitors.  Under XP, I had nothing wrong with 'apply' or 'associate' or 'use' of these profiles by using the MS color, and both monitors would change appearance when starting a State fully calibrated and profiled.

  Now, in Win7, I followed fairly confusing instructions, go to the color management / devices / select one of the screens / click "use my settings for this device" / add a profile box "Profiles associated with this device" using the add"" button.  Then I click on the correct profile in this box and click "Set as default profile".  Nothing happens.  I can put any weird profile as a default, and nothing happens.

  I don't even know instructions during the effective application of this profile is supposed to happen, but guess it is when you click on "set as default profile."

  "It may be a clue that the color management dialog box fails to identify my poster other than in the form ' generic PnP monitor - NVIDIA GeForce 9800 GT" while the control panel NVIDIA and Windows 'Screen Resolution' box both manage to identify the poster correctly and use their own name i, e, Eizo L768 and Samsung SyncMaster.

  In addition, 'Identify display' in the dialogue box CM works exactly the opposite of how it works in the other two boxes that is Samsung (left) is number 1 in color Mgmt, but number 2 in the control panel Nvidia and Windows 'Screen Resolution' box.

  I'm stuck until I can address this issue, so would be very grateful for any help.

  Thank you

  Thanks the geek for your help.  No thank you somehow to anyone from Microsoft.  None of this reflects well on Microsoft; No to the current Windows 7 CM interface design, not the fact that after years of complaints and messing around with color management that they could have finally gotten the mechanics in place, but still cannot explain, or make it possible for mortals to use it, and certainly not the fact that they create these monsters and offer no support to any well-founded None.  Not a response to a MS person here, not a good answer to similar questions scattered throughout the Web, no after sales support during any period after the purchase of a new operating system of MS qualified (it's supposed to be provided by the OEM, but of course, none of them knows this kind of thing, how can you keep waiting if Microsoft don't?).  So - NO support.

  I can't believe I fell for the hype and purchased a new Windows System.  I swear to you that this is my LAST purchase of windows.  Microsoft, despite the amazing improvements in Win7, still do not understand.

  Here's the answer to my problem, thanks to some photographers and no thanks to Microsoft...

  1 ASSOCIATE YOUR PROFILES WITH DISPLAY AND SET as a DEFAULT value
  
  To apply an existing ICC profile (ICM file created by any process of calibration), follow these steps.

  Control panel / display / change display settings / advanced settings / color management / color (new!)  / Devices / select one of your displays * 1 / click "use my settings for this device" * 2 / if necessary adds profile applicable to the area of "Profiles associated with this device" using the "Add" button (if your profile is not already listed but is available somewhere on the network or the computer) / click on the correct profile in this box and click "set as default profile."

  * 1 the dialog boxes CM do not label your displays just like the other dialog boxes, they seem to lose the manufacturer and the model number information that is available elsewhere, so your display ABC model nn appears as display: 1. Generic PnP monitor .  Also note that at least on my system, display "1" was in fact display '2' in the other dialogs settings display and vice versa.

  * 2 that could think by selecting 'Use my settings for this device' would mean the Windows using your settings for this device (screen), but apparently it isn't.  That means... Well, I don't know what that means.  Perhaps it means that if you do select not her, even the next step (see below) will not help you.

  Good work so far - unnecessarily complex - and tortuous, but has a certain logic.  Unfortunately it is not nothing at all, until you train the secret key.  Well it seems that the above should do what you want, you need to do something that is quite obvious and not mentioned at all in the General discussion of the help and apparently not known by the 67 people who have read my question.  In fact, it is listed in the section to help Ms... at the bottom of the "Description of the color management settings" and after a largely incomprehensible mass of things that appear not to be relevant, there is a link that is not listed in the content at the top and almost impossible to see... To enable or disable calibration loading Windows

  2 ACTIVATE THE CALIBRATION BY WINDOWS LOADING

  Here's the little hidden from the help file...

  1. To enable or disable calibration loading of Windows, you must be logged in with an account of a user with administrator privileges.

  2. Click to open color management.

  3. Click the Advanced tab, and then click change system default values.

  4. Click on the Advanced tab in the color - default system, dialog management, and do one of the following:

     • To allow Windows to load and display calibrations, check the box use Windows display calibration.

     • To prevent Windows from loading screen calibration, clear use Windows display calibration check box.

  5. Click Close in the color management - default settings dialog box of the system.

  6. Click Close in the color management dialog box.

  Not only it obscure, it confounds even by the fact that you are in the same dialog twice, but the second time is the reference color - default system management instead of the color management as it was the first two times.   But only on the second time is the required box enabled to allow you to check or do a system wide setting.  Easy to miss.

  Experts of either MS doesn't know about it and can not find in the help files or the other, or that they couldn't be bothered to answer my question.  In any case a) I hope this helps someone else, and b) I hope that Mrs. lift their game to support and actually meets the future to frustrated and powerless people that I was.  Thanks Microsoft for losing a day of my life.

• right click Taskbar Windows 7 (x 64) or NTC alt del the Task Manager opens to the first tab.

  Click right Windows 7 (x 64) or NTC alt del the Task Manager opens to the first tab. Where are shown running programs. No other tabs are displayed, and to close the task mngr I do alt f4 to close. I need to see the current processes, I am at a loss. is there a tm 64-bit program that should be started

  Double-click in the zone indicated in yellow and he will return to the display by tabs

  

• Feature request ACR - support for the predefined folder and name change

  Please add the ability to organize the first files camera presets. He quickly gets to be too many presets in one place even with a naming structure well-thought-out. Renaming within ACR would also be a great improvement.

  Please add your suggestion to the link below.

  Feature request/Bug Report Form

  Kind regards

  Mohit

• [feature request] disable by default by this action for this site for all PDFs "remember."

  

  This option should be disabled by default on all versions of the reader. This is a problem of security major if a possible link in the pdf file redirects to a malicious Web site.

  the user MUST have the ability to control this behavior.

  to make this option disabled by default in the next version!

  Feature requests/bug reports have a much better chance to receive attention if posted here: feature request/Bug Report Form