Why the system says "Unrecognized USB device"...?

Similar Questions

• Unrecognized USB device... need help with the SFC results!

  I followed several channels of the problems that were associated with the popup error in Vista that says "Unrecognized USB device"... that I'm having the same problem.

  I tried to uninstall and reinstall my USB drivers with nothing working.  It was recommended that SFC.exe in the message area of C:.  I did and it came up with error messages that could not be repaired in the CFS program.  What should I do to fix these problems?  I posted the report itself below, showing that areas that have problems.

  Any help would be appreciated!

  ] Beginning Verify and Repair transaction
  2010-02-15 16:28:48, info CSI 00000124 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:28:50, info CSI 00000126 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:28:50, info CSI 00000127 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 16:28:50, CSI Info 0000012a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2010-02-15 16:28:51, CSI Info 0000012 c [SR] verification complete

  ] Beginning Verify and Repair transaction

  2010-02-15 16:32:13, Info CSI 00000199 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:32:13, CSI Info 0000019b [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:32:13, CSI Info 0000019 c [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 16:32:13, Info CSI 0000019f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2010-02-15 16:32:13, 000001 has 1 CSI Info [SR] full repair

  2010-02-15 16:32:13, 000001 has 2 CSI Info [SR] validation transaction

  2010-02-15 16:32:13, 000001 6 CSI Info [SR] a check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  2010-02-15 18:31:23, info CSI 00000006 [SR] components check 100 (0 x 00000064)

  ] Beginning Verify and Repair transaction

  2010-02-15 18:35:11, info CSI 00000124 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:35:12, Info CSI 00000126 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:35:12, Info CSI 00000127 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 18:35:12, CSI Info 0000012a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2010-02-15 18:35:13, CSI Info 0000012 c [SR] verification complete

  ] Beginning Verify and Repair transaction

  2010-02-15 18:37:58, info CSI 00000199 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:37:58, CSI Info 0000019b [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:37:58, CSI Info 0000019 c [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 18:37:58, Info CSI 0000019f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2010-02-15 18:37:58, 000001 has 1 CSI Info [SR] full repair

  Hi CapsFanQ,

  To repair the system corrupted files on the computer that was not fixed by SFC scan, an upgrade in place might have to accomplish.

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/default.aspx/KB/968279

  (See option 1 in the link)

  Note:  Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. Make sure that you back up personal data to disks or other storage devices before performing an upgrade on the spot. To perform an upgrade in-place, follow these steps.

  Until you try to upgrade on the spot, I suggest you follow the steps mentioned below to fix USB:

  Step 1: Run the fixit provided in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  If the problem persists,

  Step 2: Connect the device to a different USB port and test and also to connect the device to another computer to eliminate the problem of USB device.

   

  If the problem persists,

  Step 3: Reinstall the USB controllers.
  

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  You can contact the manufacturer of the USB device for known problems

  Step 4: Update the driver of the motherboard (Chip set drivers) to the latest version.

  Note: Please check with the manufacturer of the motherboard before installing the driver.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IPod Classic (80 GB) "unrecognized USB device" running windows 7

  I've recently upgraded to a new laptop (acer aspire 5738G) running windows 7. I managed to transfer my itunes through library and that you have installed itunes (x 64) that works well. When I plug my ipod classic (80 GB) on a usb port, I get a message saying "unrecognized usb device". I managed to make it work once, but when I did, I got an error understood saying "this drive could run faster" or something in that sense. I tried other usb devices and all seem to work well, so I guess that's the ipod drivers or a compatibility issue with 7 and itunes. I uninstalled and reinstalled itunes, have reinstalled the usb drivers and have browsed the net for a fix but wo's me again! I waited patiently a hotfix from microsoft or apple, but still nothing. It seems that there is a great problem of the spread. Does anyone have any ideas as what was once a small annoying problem turns into a right royal pain in the a$ $. Thanks in advance!

  I also have the same problem is "USB not recognized" and I have the old IPOD classic (20 GB).

  The problem started when I upgraded my home pc to Windows 7 Pro 32-bit of Windows Vista. My iphone 3gs is currently recognized properly but not the ipod 20 GB on the same iTunes 9.0.2. Device Manager reports the 20 GB ipod as "unknown device".

  My computer is a HP Pavilion Slimline s3620f. Almost tried everything:
  -reboot several times
  -Reinstall itunes several times
  -restart the service itunes several times
  -Reconnect the ipod several times
  -tried the front and back of the usb ports
  -deleted the Sentinel file under c:/users //musci/itunes/I've found solution on another forum

  ... still nada, zit, ala!

  Update: I've found a workaround. Fortunately, my ipod classic cable is a cable in there provided with firewire in addition to the usb cable. Since my home pc has firewire port, Windows 7 now recognizes the classic ipod through this port, have a drive letter and itunes works on it as well.

• "unrecognized usb device": error message every time that a usb device is plugged into one of the usb ports

  "unrecognized usb device": error message every time that a usb device is plugged into one of the usb ports

  1. my laptop - acer aspire 5030 - has been having this problem for the last five months.

  2. I tried everything including changing service pack, as we have xp professional, he has recently upgraded to vista business 32-bit with service pack 1.

  3 tried all the methods start the laptop after a few hours, remove the battery, press the power button for half a minute, and so on.

  4. I finally he formatted a couple of times, but the problem is not.

  5. later, I improved the professional system of vista and installed the latest security patches, but the problem remains

  6. now, I started to update its drivers, although the device is identified to be connected, but is not recognized. "the error message" not recognized usb device "appears. I try to reinstall the drivers or upgrade of drivers, it does not. It displays the message "the drivers for this device are to this day.

  7. initially, the connection of the device, the drivers are installed but still the device does not show in Explorer.

  8. I tried to change some registry values by merging a regedit file in the registry - for display devices that are not present; but still, it has failed.

  9. I then tried to delete the file infcache1.inf in c:\windows\system32\inf, but the problem persists.

  10. Subsequently, I tried to create another registry entry to "disable selective suspend" in HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB by adding DWORD and assigning a binary value of 1.

  11. I tried later also to uninstall all the system devices including USB controllers, drives and the storage controllers, who must still without success.

  12. I tried to see if the drivers in safe mode, which they did not.

  13. I tried to delete the following registry entries =

  HKEY_LOCAL_MACHINES\System\CurrentControlSet\Enum | USB PORT; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFCI-08002BE10318 & HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFCI-08002BE10200.  The computer does not have alow it.

  14. the BIOS indicates device pnp "disabled", which I also look for the BIOS settings, which do not allow me to change to change existing ones.

  15. I have not found the WINDOWS\SYSTEM32\drivers\USBSTOR file. SYS in my driver store. This affects the system?

  16. I also contacted manufacturers pnp devices that provided me with most recent and versions compatible drivers for my devices - namely an apple ipod & Seagate external HARD drive - but even after that the drivers are installed properly and the system rebooted the problem remains. Is this something to do with the updated playing driver registry entries does not after the update? OR is what registry entries are configured to only read the entries at the time of the installation of the OS?

  17. I also contacted local sellers who have suggested to me to change the "motherboard". This will help as a last resort?

  18. in the meantime I had also installed other operating systems to Linux - Fedora and Ubuntu; Full Windows XP - Home & Professional and Vista Edition. All these have been installed successfully but do not solve the problem of usb.

  19. I have also raised the original HARD disk & replaced by another HARD disk. also checked the power of all ihee and ehee usb ports to be at least 5 V. I also disabled the automatic deactivation of devices usb by the system. physical contact, ports and connecting cable is fine. the distribution of power is set at 10% for the ihee ports and 20% for ports ehee, which is what is should be the physical output is also close to 5V for all ports connected.

  20. all professional (hardware or software) should any solution for the problem of the usb ports on my laptop?

  Something that you haven't tried:

  How to fix USB device not recognized in Windows

  http://www.online-tech-tips.com/computer-tips/USB-device-not-recognized/

  I hope I could help

• My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

  My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

  Hello

  1. do you have HTC Manager installed on the computer?

  2. have you tried it with different USB ports?

  You need the HTC Sync HTC phone Manager software.

  Method 1: Try again with different USB ports and see if that helps.

   

  Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

  If the methods above do not help, you can contact HTC for additional help.

  Here is the link: http://www.htc.com/us/support/

• Cannot use mobile mouse 3500 "unrecognized usb device".

  Original title: mobile mouse 3500

  Mobile mouse 3500 has malfunctioned. "unrecognized usb device". This has happened once before. It seemed to correct itself when my computer is doing a weekly update. I did an update manually, but the error has not corrected itself. This mouse is only a few months old.

  Hello

  What operating system do you use?

  Step 1: Try to run the fix it tool to the article below and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Update the driver for this device using the audit and the Device Manager.
  Reference: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  Step 3: Uninstall and reinstall the driver and the software for this device.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  http://www.Microsoft.com/hardware/en-us/downloads

  I hope this helps.

• Satellite A100-233 - error that unrecognized USB device

  I have a problem with my USB ports, they where working fine but all of a sudden they start gives me error that unrecognized usb device. I tried to reinstall XP but still the same.

  Can someone give my solution to this problem?.

  Hello

  You have yellow exclamation marks in Device Manager?
  I had a similar problem with the USB ports a few years ago. I removed the ports in Device Manager and reboot the laptop. The USB ports will recognize again.
  Furthermore, I reinstalled the latest chipset driver and everything worked well.

  The latest chipset driver download on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

  Windows has no

  I had to spend my PC this morning. Moving it, I decided to implement a new network card. When I reconnected it all the cables, I plugged my USB mouse on another USB port where it had been plugged in before. The computer is more than 7 years old and I've never had a problem with the front Windows Validation. I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

  When Windows checks to see if you have moved your copy of Windows to "another computer", among other things, that his focus on the identification of several strands of material in the computer to see if they are different than when Windows was first installed.  I do not remember the list for now, but I remember that the network card is one of the pieces - and IIRC it is 'valuable' higher than others to reach the conclusion.

  You probably other elements has changed over the past seven years and now Windows has decided to have a "new" computer  Assuming that you haven't changed the motherboard - if you had, you would have had this issue at the time wherever you did--your installation is still legal.  Reactivate using your original license key. It should work online, but you will need to call the number that appears in the error message from re - validate.

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• I want to delete an application in the finder, when I move it to the trash. The system says that i have open it but I did not! What should I do?

  I want to delete an application in the finder, when I move it to the trash. The system says that i have open it but I did not! What should I do?

  Here are some tips to solve the problems of trash. "

  http://osxdaily.com/2011/06/20/uninstall-Mac-applications/

  https://support.Apple.com/en-us/HT201583

  http://www.thexlab.com/FAQs/trash.html

  He mioght be helpful if you indicated the application in question.

  Ciao.

• Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  On Wednesday, March 6, 2013 15:02:32 + 0000, DanielOrtner wrote:

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  3.6 GB is a very good number - much higher than most people's.

  All versions of Windows 32-bit client (not just XP/Vista/7/8) have a
  Address 4 GB of space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.

  But you can't use the whole address space. Even if you have a
  Address space of 4 GB, you can only use around 3. 1 GB of RAM (and as I
  said, you do much better than that). This is because some of
  This space is used by the hardware and is not available for the operation
  system and applications. The amount you can
  use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  3. 1 GB.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.

• Why the system idle process makes my desk fan light constantly

  Why the system idle process makes my desk fan light constantly

  The system idle process has nothing to do with your fan coming.  Your computer constantly monitors the temperature of your CPU and if this temperature is too hot, then the fans move on to high speed.  You can use the freeware 'CoreTemp' program to display the temperature of your CPU, if you want.  Temperature rises usually when the computer is under heavy CPU load but the usual cause of high speed switching fans is an accumulation of dust inside the computer and close the CPU fan.  Open your case and clean the dust.  A can of compressed air makes quick work of it.

  HTH,
  JW

• Why the system error memory dump files create everytime in vista

  Why the system error memory dump files create everytime in vista

  Please help me find

  Hi ashwin_amb,

  System error memory dump files contain dump files created by Windows because of a stop error. They are created when an application crashes and creates an exception code. The dump file indicates which line or an area of memory the program crashed at and is used for troubleshooting.

  For more information, see the KB article:

  How read partial memory dump files that Windows creates for debugging

  http://support.Microsoft.com/kb/315263

  Hope the helps of information.

• I had to reboot my system and then to install my ACC, I used the same product key (redemption code). However, the system says that the code has been used. Anyone can teach me how I can use the same installation code to download VAC. Thank you in advance

  I had to reboot my system and then to install my ACC, I used the same product key (redemption code). However, the system says that the code has been used. Anyone can teach me how I can use the same installation code to download VAC. Thank you in advance.

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop

  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• I pay for Adobe CC. Why the app say "Start trial" rather that "open"?

  I pay for Adobe CC. Why the app say "Start trial" rather that "open"? I have already installed the application and I have never had problems to use it without restriction before.

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  https://forums.Adobe.com/thread/1962238