display error margins?

Similar Questions

• Safari doesn't play videos Netfllix and gives a HDCP compatible display error

  I am able to watch netflix on any other browser. When I try to play anyv netflix videos in Safari it gives the message error "Ah, something went wrong" and HDCP compatible display error...

  Greetings Hawkdive,

  Thank you for using communities Support from Apple!

  I understand that you are not able to play videos from Netflix in Safari on your Mac, so that you can without problem using other browsers. In this case, I recommend reading over and working through the troubleshooting steps suggested in the following Help article Netflix.

  Netflix error S7363-1266-48444350

  Have a great day!

• After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  If you see the lock of Activation screen after update your iOS device, you want to try the following:

  -Restart your iOS device and try to connect again.

  -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

  -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

  -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

  -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

  I hope that helps!

• HP NVIDIA Geforce 8400 GS display error

  Had this computer for a year and a half and I played a few but I played games on it all the time.

  Model: m9058n

  When I was playing my game online, the screen messed up and I got the display error a few times but it was random and never threatened any whatsoever, until after he was just blue screen saying that there is a "display driver error."  persistent problem when the logo screen when I start my computer had a few white dots on the screen as the graphics card was messed up, but when I looked at the map he was clean and in good when eventualy began to the high fine but computer froze again, and is the same thing, accept this time I had a corrupted with the file bmdedit.exe file error Finally, I used my recovery discs HP (2) I used to restore and it worked! But unfortunately it has messed up after an hour, but this time I might actually go in safe mode every other time she tells just to do a startup repair but when I tried to get a different driver, he has never worked and it is still stuck like that I use a different computer than theres absolutely no way to get into , I tried to get it back again, but if she the messed up screen it just hard will not work, so I was able to install windows makes worst envy.

  (1) I can't go in safe mode

  (2) I tried recovery disks did not work

  (3) it is impossible to install windows

  (4) all in the computer has been checked several times dobule

  I think it's just the graphics card and just nothing I can do myself cannot be fixed wise software thereon or he does not resemble anything that can be done, but I came to see ideas that I have not tried.

  Anything that can run WoW really well lol, cannot enjoy full-screen or the shadows without losing 24 images

• I m unable to turn on windows Defender. It displays error 0 * 800106ba. I m using microsoft security databases since then I m having this problem

  I m unable to turn on windows Defender. It displays error 0 * 800106ba. I m using microsoft security databases since then I m having this problem

  Hello

  Are you running MSE or other antivirus/security programs stop Windows Defender running?
  Whether Windows Defender is blocked from running by them. McAfee, AVG and many others to do this.
  MSE includes features of Windows Defender inside run that separately it would be redundant.

  ------------------------------------------------

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

  Start - type in the search box-> Windows Defender - find top - make a right click on it.
  RUN AS ADMIN

  If no joy using Start - computer or Windows Explorer to access this folder and create a
  Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
  see if they point to here.

  Goal
  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Start in
  "%ProgramFiles%\Windows defender.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  --------------------------------------

  Maybe something here if necessary:

  What is display / causing the error message? Some anitvirus/security/antispyware products can
  cause this error. On those who use you, including those that your never had even those
  uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Marketing, Windows XP displays "error loading msinuc32.dll specified module could not be found.

  While starting up, Windows XP displays "Error loading msinuc32.dll specified module could not be found" help me solve

  Hi Rahmansherif,

  ·         Did you do changes on the computer before the show?

  Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

• Windows cannot upgrade display error 8007010b

  my computer will not any update of windows and displays error 8007010b

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

• I keep getting invited to windows update (vista): security for PowerPoint Viewer 2003 (KB969615) update installs not and displays "error code 4397."

  Security for PowerPoint Viewer 2003 (KB969615) update installs not and displays "error code 4397."

  Please help with installation. After a short period of time, I get a message that there is a problem and it will stop

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Queue displays error and nothing does not print on HP LaserJet 2100 M PCL6 on Windows Vista - 64 bit

  Original title: setting up a printer HP LaserJet 2100 M PCL6 on Windows Vista - 64

  I'm having trouble installing my printer HP LaserJet 2100 M. When I connect the cable USB Windows Vista responds with complete installation... However, when I try to print queue displays error and nothing prints. I don't get an error code. Can you please help... Thank you

  Hi onelittlekat,

  1. do you receive any error messages?

  You can try to uninstall the device drivers from programs and features and Device Manager and check the box to remove the drivers for this software and go ahead.

  Step 1:

  Uninstall the drivers for printer from programs and features

  a. click on start

  b. type appwiz.cpl in the start search

  c. find all the driver printer package, right-click on it and select uninstall.

  Step 2:

  Uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  c. in find Manager device for the device, right-click on it and select the option uninstall.

  After you have uninstalled the driver, download and install the drivers from the link below and see if it works fine or not.

  For HP LaserJet 2100 M PCL6 driver, see the link

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ja-45284-16&LC=en&DLC=en&cc=us&OS=2093&product=60650&sw_lang

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My printer (laserjet m1210) continues to display error memory power

  My printer (laserjet m1210) continues to display error memory power. What is and how to fix it?

  Hello world

  There is a clip on the chip on the cartridge's protective plastic. Remove the orange plastic, and he's going to quit giving you the power of memory error. Refer to figure 6

  Power supply memory error "Message is displayed on the control panel

  

• Failed to download twice Win. 10. w 7 home pre. It displays error C1900101-20003.

  * Original title: Windows 10

  Failed to download twice Win. 10. w 7 home pre. on my Dell Inspiron 560.  On the final installation at 19%, it stops and recharge w. 7. (Thanks for that)

  It displays error C1900101-20003

  Wally in Iowa

  Please see the bulletin:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Windows do not install display error c1900101-30018

  Original title: windows 10

  Why windows do not install display error c1900101-30018

  The phase "Installation drivers and features" is the most delicate part of the upgrade. If you see a c1900101 x300xx failure, it means that we have failed in this phase. The most common failure is x 30018, which usually means a driver crashed when we there for the first time. Any driver can cause failure, but he can't block 100% of the time. If you try again, it may work only.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

  I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

  original title: windows 7 gamer edition

  Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

  Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

  You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

  Resources:
  The Dangers of the purchase or use of software pirates - Notebooks.com

• cannot update, displays error 529

  Girls Ipod syncs, contacted Apple and they said to update Windows. When I tried there was a problem. It will not update. Displays error 529. I noticed that whenever I power off, he tries to update. I also noticed that when I was looking around a solution that I saw that it was show architecture AMD but I have an Intel processor. I don't know if that has anything to do with it, but I thought I'd throw it anyway. Thanks for any help

  Hi bobbbell,

  You are unable to install Silverlight?

  What is the complete error message you receive when the update fails?

  What is the full version of Windows that you have installed on the computer?

  Have what troubleshooting measures you tried?

  If you have not already, start your computer in a clean boot State and try to install the update.

• A single application preventing the closure of the displayed error message...

  Hello

  When I closed my laptop, the displayed error message one application preventing closing down.

  as directed by your previous post, I have set up my laptop with it, but this problem yet and still occur.

  now the error message saying Windows host prevents your stop down.

  Please, help me to overcome this problem.

  Hi Regis,

  Thanks for posting your question on the Microsoft Community forums.

  I understand that you get the error message so that the closure of the system. However, I would like to know some more information on the issue to provide you with better assistance.

  1. Who is "previous post" you are talking about?
  2. What is the exact error message you get now on "Windows"host?
  3. You did it any significant hardware or change software on the computer before this problem?

  The question may arise if certain services (including background Windows services and other third-party application services) are still in operation when you try to shut down the computer.

  The applications or programs sometimes have ongoing services which are still ongoing even if you close your programs. Properties of an instance, there are many third party messengers that require you to sign in to use the application. Thus, when you close the application, the corresponding services are sometimes even functional whereby the program restarted in less time and log into the self-signed.

  Therefore, usually do not completely quit us some programs when we literally close them and so we get these guests. To diagnose the problem, you can restart the computer in safe mode when only minimal services are in use, you should not get these guests so that closing.

  If you do not get these guests in safe mode, you can also try to boot your system in a clean boot, a selective startup in the third that most of the services are disabled. To do this, you can consult the following link:

  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need additional help on the issue, we will be happy to help you.