try to update to sp3 xp, get an error 8024400 a message
When you try to upgrade to sp3, windows looks like my computer to see what I need, then I get an error 8024400 a message and a website message has encountered a problem and cannot display the page you are trying to view
Try to download directly on your desktop, then run it. You can get SP3 from here.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
I hope this helps.
Tags: Windows
Similar Questions
-
Try to update XP SP3 and get the error number: 0x8007041D
Long story, short version. A little crushed hardrive and Windows wouldn't install... was a new hardrive installed and installed Windows XP of origin and offers most of the stuff of old disk again. Couldn't have IE8 to open as they apparently need SP2 to run. Used competition (FF) to download SP2 and settled. Has been able to use IE8, tried to download the SP3 and get it installed... no luck. Get a message that something needed to re-register, so I let him do so automatically. It is 100% and then said that it has encountered an error and gives me the error 0x8007041D number. I can't find anything on it and my computer is not able to do automatic updates. Cannot yet download SP3 manually, get the same error. I know it's an older Dell but it is a good and I like to keep his race for another year or two. Anyone have any ideas? Thank you!
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!
Hello
Please see the help document for troubleshooting with the installation logs: https://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
Let us know if this helps!
-
whenever I try to update windows KB972036 I get the error code 80073712
Impossible to update KB972036 get code error 80073712
See: Error Message When you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".
http://support.Microsoft.com/kb/957310 TaurArian [MVP] 2005-2010 - Update Services -
try to update my CS5 and get the error Code: U43M1D207
My web pages seems odd on the phones or tablets.
It's clear when using a computer, but not the hand that held to design.
All of the suggestions.Tried to update, but get the error U43M1D207 code
Thank you & have a blessed day.
-
Attempt to update XP SP3 and get this error 0x8024800A
I have an 0x8024800A error that will not update my computer, this computer is a Dell laptop, and it has not fed for about 6 to 8 months. I have read everything I can find on the KB and nothing seems to help.
.
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options:
I have an 0x8024800A error that will not update my computer, this computer is a Dell laptop, and it has not fed for about 6 to 8 months. I have read everything I can find on the KB and nothing seems to help.
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options:
Check the time zone is correct and the time and date are set for where you are.
Check the SP3 is installed on the system. If Yes...Settings reset Internet Explorer<-- that="" is="" a="">-->
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner. Remove everything it finds.
Reset.
Now reset your Windows with this FixIt components update:
How to reset the Windows Update components?Reset.
Try to get updates.
If it still does not work, try this...
- Start an elevated command prompt.
- Run the following commands pressing on enter after each line:
net stop wuauserv
CD %SystemRoot%\System32
Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
net start wuauserv - Reset
- Try to reinstall updates
* Important * When you do this, the following problems occur:
- Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
- When you remove the Software Distribution folder, your download history is deleted.
- If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.
* Note * if the issue is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.STILL no?
Use this FixIt:
How to get the latest version of the Windows Update AgentReset.
Save components WU:
- Start an elevated command prompt.
- Run the following commands pressing on enter after each line:
regsvr32 Jscript.dll
regsvr32 c:\windows\system32\wuapi.dll
regsvr32 c:\windows\system32\wuaueng.dllReset.
Try updates.
If it still does not work after that - repeat
Now reset your Windows with this FixIt components update:
How to reset the Windows Update components?... once more. Restart and try to get updates again.
In any case: back - let everyone know what is happening.
-
9.3 update installation error
Apple withdrew temporarily updating iOS 9.3 for devices more old to deal with some issues, what he was creating. Better to wait a few days for them to correct problems.
-
How to solve problems of server connection?
Please mention the operating system and the version of your computer
-
When I try to update to Firefox, I get a window saying that it cannot be loaded because I don't have all the necessary permissions. What do this mean and what do I do?
If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.
Download a new copy of the Firefox program and save the file on the desktop DMG
- Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
- Trash the present application Firefox to do a clean (re-) install
- Install the new version you downloaded
Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.
-
When you try to update Windows XP, I get the message: error number: 0 x 80245001
When you try to update Windows XP, I get the message: error number: 0 x 80245001
Hello
If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.
The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.
Here is some important information that we need:
1. What is the level of service pack installed on your computer?
(Click the Start button, click run, type winver, and press Enter to know that information)2. what update failed to install with this particular error code?
(Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)In the meantime, you can follow these steps on the computer and see if that helps:
Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.
1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.
2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:
Automatic update service
(BITS) Background Intelligent Transfer Service
Cryptographic services
3. open Windows Explorer and navigate to the following location:
C:\Windows\
Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old
4. go to the following location:
C:\Windows\System32\
Rename the Catroot2 in Catroot2.old folder
(be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)
5. now go back to the Services window and start the services of three you had stopped earlier.
Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.
I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.
-
When I try to run the update in widows I get the error number: 0x8024400A
When I try to run the update in widows I get the error number: 0x8024400A. I also tried to restart the automatic update service and BITS service with no luck. Any ideas? I am running Windows XP SP2 on a Dell Latitude. I lost a hard drive and just reinstalled today of a disc from Dell.
Thank you
Adam
http://support.Microsoft.com/kb/836941
Read the above article, you can use Fixit, but I suggest fix you it yourself by following the steps in the resolution.
-
Every time I try to update windows Vista, I get error 8E5E0408 and error 0x8000FFFF. What are the mistakes and how to fix?
0x80000FFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update
-
When I try to download the update of windows I get an error code every time: 802440F.
When I try to download the update of windows I get an error code every time: 802440F. Can you please help me solve this problem?
@ Evanston only!...
You see the effects of a hijackware infection! If you had used the computer longer, I might recommend trying to detect & remove infections. But it would probably take a week or two and I'm sure you have better to do with your time right now so I would recommend the following (which shouldn't take any more than two hours of uninterrupted time).
See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Win7: see "using the custom installation and formatting the hard drive option" (or "reinstall it Windows 7") http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 article
NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").
After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxVERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool again Norton before installing updates AND BEFORE installing your new application antivirus (for example, Avast5 or Microsoft Security Essentials, free).
Tip: Do not install Spybot again; It's really overkill in Win7 my humble OPINION, especially if you are installing Microsoft Security Essentials.
See also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
http://www.us-cert.gov/CAs/tips/ST05-007.htmlMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
Wish I had better news for you. Good luck & achieve before Thanksgiving 2010!
-
Whenever I try to update the application, I get this message: update failed. There was an error of installation of this update. Try again later or contact customer support (U44M1p34). I don't know what to do to solve this problem and update of my application.
-
Hello my creative cloud application is empty and showing only white, I can't update or no matter what I tried to re-isntal and nothing and I'm trying to update also via photoshop and also says, if I try to update via photoshop I get this Adobe Application Manager is required to solve this problem. However, it is missing or damaged. Please download and install a new copy of Application Manager of 'http://www.adobe.com/go/applicationmanager'. but I also can't help using the application manager
Follow the procedure below:
N ° 1)
Adobe Application Manager trash from Applications > utilities.
Step 2)
Click on the link below and download Adobe Application Manager and install the same.
http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg
Once the installation is complete, a niche will disappear.
Then open " Applications" folder and locate the launch of Adobe Application Manager icon and double-click it and update.
Maybe you are looking for
-
Add-ons with those willing only twinkle or flash during the initial installation. When I go out and come back, they are only a stable image.
-
HP 2000-2b19WM Notebook PC: Bios of HP 2000-2b19WM without mapping new ram
Hi guys Im new to the forum and looked for help on my problem, but came away empty-handed. Im hoping some of you experts can help. The problem im having is bios for my new ram card. When I get to the main Bios screen, most of the options are grayed o
-
Message of support HP _re old version of windows
I managed enhanced W8 to 8.1 W on my new HP Pavilion Touchsmart 15 laptop PC. Now I'm in a quandry on a message that appears in the HP Support Assistant. What what can make this old version of windows be on my C drive? I certainly don't want to delet
-
Monitoring of processes in foglight 5.6.7
Hello We have an obligation of monitoring of a set of processes that we need of alerts. We have a custom dashboard that displays all the processes running on the monitored hosts but when we tried to create alerts for "alert for process if he stopped"
-
What to do about white smoke, whispy from slot where paper comes out?
After a false paper jam message (sticky humidity and only partially left paper tray), the printer prints whispy thin, but thin, white smoke comes out with the printed sheets. I don't know if there is a smell that I have little sense of smell. Help! P