Settings RDP with the customer to view.

Similar Questions

• Unable to connect with the customer to view

  Hello

  I can connect to my first machine winXP with rdp, but the customer view told me that there is a connection error (error http, status = 400). In the "server connection", I used my ESX host's IP address.

  What does poorly or describing what it takes to make this work?

  Thank you very much

  Malta

  Sorry, just to clarify, the connection to the server is a Windows Server (may be virtual) who has the login server software installed. It's in its web interface that you configure all the settings for your desktops, your pools of desktop computers and users or groups have the right to use them. Although view uses rdp to connect protocol client to view isn't just a remote desktop client.

  You also need the view-agent installed in the virtual desktop machine, you want to connect.

  Once you point the client to connect to the server, it displays all the virtual desktop that took the user with that right you authenticated. The administrator is not automatically or the right to use any desktop PC, you must manually set the rights.

• See 4 and VM Windows 7 x 64: impossible to connect with the customer to view

  I have Win7 x 64 VM.

  There was a lot of questions during the installation of the Agent from the view.

  Now, I can not connect to it with View Client. PCoIP shows me black screen, RDP-connect "all sources of funds are occupied."

  
  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

  Anton,

  Desktop 64-bit are not supported for view 4.0. Please see http://www.vmware.com/pdf/view40_admin_guide.pdf for the full list of desktop operating systems.

  Mike

  (Apologies for the exact same about three threads)

• LOV cascading if I don't have only one table with the customer name and the name of the product in the ADF.

  Hi Please help me how to use cascade, if I don't have only one table with the customer name and the name of the product in the ADF... I use Jdeveloper 11.1.

  For the client, I used customer VO with client list to fill but to populate the product that I use bind variable PrODUCT_NAME select distinct from TABLE where client_name =: bindCustomer

  so first of all, I need to set the variable of liaison on behalf of the selected customer.

  Can you please tell me how to set this variable binding in this case.

  After you set the LOV to your product attribute, correspondting VO in the LOV will appear under view accessors.

  Change the accessor of the view, you will see the variable binding. Set its value to the customer field of the parent object.

  Visit this link: https://www.youtube.com/watch?v=nXwL2_RP7AQ

  Kind regards

  Elias.

• can I install CS5 on my laptop if 2 people already use the creative suite? I've now been referred to as forums after talking with the customer service and technical support online

  can I install CS5 on my laptop if 2 people already use the creative suite? I've now been referred to as forums after talking with the customer service and technical support online

  I was told they are separated once and also says to check the forums?

  Yes you can.

  ~ Rohit

• I start on the site where I bought Adobe After Effects. Then I pressed 'Download', but the site you get on says (translated from English): there are problems, try again later. Get in touch with the customer, if the problem keept going. "While it

  I start on the site where I bought Adobe After Effects. Then I pressed 'Download', but the site you get on says (translated from English): there are problems, try again later. Get in touch with the customer, if the problem keept going. "So, here am I, I really hope someone knows the answer...

  Thank you

  Are you referring to CC version After Effects?

  If so, you must download and install Adobe Creative Cloud app using whiuch, you can install after effects CC.

  Windows:

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

  Mac:

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

  Reference:

  Download and install Adobe Creative Cloud apps

• Urgent: how to integrate the SOUL with the custom of the OPS form?

  Hello
  
  One is to have the idea of integrating the TEA with the custom of the OPS form? Please provide the solution if it is possible. The requirement is to initiate the approval using the SOUL of the irecruitement customization form.
  
  Kind regards
  Ashish

  Hi Ashish,

  SOUL is called from the workflow - you need to open the workflow or pl/sql calls using wf_engine or by outbreak of corporate event (I dunno how to initiate this workflow).

  Kind regards
  Gareth

• BlackBerry smartphone profile settings replaced with the latest changes

  Whenever I change the settings for a profile, it updates all other profiles with the same settings.  Everyone knows about this problem?

  Yep! I called Verizon, which I transferred to RIM, and they said that they are working on this topic. For now, you can make your own custom profiles and they will save and works correctly.

• How to continue rendering of the transition with the custom dialog box open

  Hello

  I'm working on a plugin for some transitions custom (currently for CS6/CC on Windows).

  I use a custom dialog (hasCustomDialog in PiPL) during the esSetup box to define the transition parameters. While the dialog box is open, first execution is suspended until the dialog box is closed.

  The problem is, if I'm fiddling with the settings I do not see the changes in the program monitor and I don't get any comment first.

  I tried to make the dialog non-blocking, but then first did not executives when I changed something in the dialog box.

  Anyone know if it is possible to maintain the dialogue and still have first actively updating the display?

  Kind regards

  Philipp Stelzer

  But I want to keep the dialog box open to see the changes directly without opening the dialog box whenever I want to change a value. Is this possible with a custom dialog?

  It is not the case.  But using the AE API with extensions of the transition, you should be able to achieve the same thing, with the effect controls panel, containing all your effects settings.

• Why can't phone or enter into a contract with the customer service!

  Adobe Cretive Cloud CC has attracted a lot of money from my account.

  I have a student - account and two months that they have attracted too much money.

  Now I can't talk or you can call! He says I can chat every 24 hours - but when I press the button, it does not work.

  And the phone number does not work all by calling the Denmark...

  I feel helpless with stupid customer support you!

  What should do?

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

  Make sure that you use a browser that allows cookies and pop-up windows.

• Problems with the mode live view

  I created a new page yesterday (first with the bootstrap information). Everything went well.

  When I opened again today, the 'live' view displays a blank page with a "unknown error: problem loading page". No idea what is the problem? TR

  You must have a server installed test and running to preview PHP pages in Live View mode.

  Your local testing server running?

• Has anyone successfully put a whole magazine of DPS on the Web with the DPS Web Viewer?

  Does anyone do this?

  You are looking for Viewer for the DPS web tips.

  I have a DPS iPad magazine, and I would use the Web of DPS Viewer to put my magazine behind a paywall and have the readers to access the entire magazine on the web.

  Does anyone do this?

  Can come us in contact?

  Looking for advice on the process - THX a LOT!

  Hello

  You can achieve as a result of the article: Content Viewer web Embedding in your web page. Adobe Developer Connection

  Targeted section provides details on the process itself and offers examples of code that allows you to create your own web viewer.

  Regarding the paywall, this adjustment can be made directly in the dash / Web Viewer field.

  In case you have problems with the code, please send an email to [email protected] and we will provide you with more details from there.

  Thank you

  Andrei

• deploy from model with the custom form does not not - NIC becomes disconnected

  [We're using vcenter 5.1 update 2]

  I have created a new model for 2012 Server R2 and I created a specification tailored to go with it. I went to test the deployment of the other day and it seemed that the personalised has not quite finished. He had put the local administrator password and baptized, but he does not join the domain. I finally understood that after the deployment, the NETWORK adapter is not connected despite having me 'connect to light' checked in the model. We are using the VMXNET 3 card.

  I've been messing around with the template for the past 2 days and I am stuck as to why it does not work. I tried the following...

  -checked the windows firewall is disabled (3 options) (Re: ESXi 5 VM / Server 2008 R2 loses the network connection after reboot)

  -removed NIC; cleaned up the registry to the HKLM\System\CurrentControlSet\Control\Network\; restarted; readded NIC (it was to eliminate any ghost NICs) (http://vnetwise.wordpress.com/2012/06/09/vmware-template-deploymentspart-1-trying-to-modify/)

  -Remove vmware tools and reinstall. (http://vnetwise.wordpress.com/2012/06/09/vmware-template-deploymentspart-1-trying-to-modify/)

  -card network in the operating system, unchecked "allow the computer to turn off to save energy" (Re: ESXi 5 VM / Server 2008 R2 loses the network connection after reboot)

  -checked that my new 2012R2 model uses the same host cluster and storage as my 2012 model that works. Also on the same port group distributed. (Essentially, all parameters of vcenter are identical between the two models)

  -also tried disabling the NETWORK card in the model (Windows Server 2012 comments customization)

  I have re-deployed the same server about 10 times and each time after deployment, you can see restart and try starting the customization but it crashes. If I manually turn the NIC on it is completed successfully. The problem is that I don't want to have to do that each time I deploy a server. Why is it disable the NIC and unchecking my option to connect to turn on and how to fix this?

  6.23.2014

  Based on tests (as detailed below):

  5.1 U2 - when patterns of deployment Server R2 2012 using a custom form, the NIC is not on after the deployment despite having ' connect at power on "checked.

  * We use VMXNET 3 and we use vDS

  
  

  Any help is very appreciated!

  -Adam

  Post edited by: atom_acres

  Problem solved: you need to update the hardware VM version from 8 to 9 on the template (also be sure to check "running on check and put vmtools")

  When you create a new virtual machine from scratch in 5.1 U2, he apparently uses VM Hardware version 8 instead of the latest v9. Once I upgraded it, made sure to check the box to have check and tools upgrade vm market, deploying with customization works and the NETWORK adapter is enabled when lit!

• Can someone please, please tell me how to get in contact with the customer?

  I don't have Adobe Pro anymore and I can't believe how hard Adobe did cancel an annual subscription. I followed ALL the instructions several times and keep putting looped to the same pages. I can't connect with their customer service chat line. Anyone had a similar experience? If so, I would be interested to know how it was resolved. It was a terrible experience that I can't just recommend Adobe products to anyone!  Help, please!

  Hi Cindy,.

  We are sorry for the inconvenience caused to you.

  Please use this link to reach the customer - Contact customer service and make sure that you choose the right options in first two menu drop-down and then click on the big blue button labeled as "still need help? Contact us»

  You can use the phone or chat to reach our customer care agent.

  Please let me know if you face any issue.

  Kind regards

  Rahul

• problem with the auto-login View 5

  Hello

  We built our environment to a field of development, but all users and workstations VM are in production (don't ask, it's a weird situation). Connect to the customer to see the development of creds, but then get rejected cuts in work stations, because it is in the area of production, but the view is from the dev creds. Is there anyway to not pass your credentials to 'View' in the virtual machine, and allow you to choose a name/password / domain?

  Thank you!

  If I'm not mistaken there is a GPO that will allow you to disable the SSO on.   You can find the GPO of the view on the broker of conection under C:\program VMware view\server\extra\group policy files.