Unable to connect with the customer to view

Similar Questions

• See 4 and VM Windows 7 x 64: impossible to connect with the customer to view

  I have Win7 x 64 VM.

  There was a lot of questions during the installation of the Agent from the view.

  Now, I can not connect to it with View Client. PCoIP shows me black screen, RDP-connect "all sources of funds are occupied."

  
  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

  Anton,

  Desktop 64-bit are not supported for view 4.0. Please see http://www.vmware.com/pdf/view40_admin_guide.pdf for the full list of desktop operating systems.

  Mike

  (Apologies for the exact same about three threads)

• Unable to connect with the PC tab

  I bought a Ubislate android 7 C + from Datawind, but unable to connect with the computer

  Burnersalvation,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. what happens when you try to connect to the tab?

  3. How do you connect tab to the computer?

  To connect to Android Ubislate to the computer, it may require some software to install on the computer provided by the manufacturer of the tab. Then I suggest you to contact the manufacturer of the tab to get help on this issue.

  Check out the link:

  http://www.ubislate.com/contact/index.html

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Unable to connect with the Mac computer?

  Unable to connect with the Mac computer?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Settings RDP with the customer to view.

  Hi all.

  Is it possible to change the RDP with the customer to display settings (resolution, colors,...) as the RDP of Windows client as it allows? View Client has just 2 options (port connection and SSL or not) by default.

  Thanks in advance.

  Sincerely,

  Jean-Philippe

  Yes you can do it.

  You can use the standard GPO in the ad and you'll find ADM files on the Server View Manager: C:\Program Files\VMware\View Manager\Extras\GPO

  Blog: http://communities.vmware.com/blogs/dommermuth

• Unable to connect with the MIFI device.

  I have a Verizon Jetpack 890 L mifi device and an older model Dell laptop that is wireless. After spending two hours on the phone with Verizon, finally got the correct IP address for the device to 'connect' with the computer. The States of the computer it is connected to the device, but the device shows that it of just nothing connected to it, have tested the device with a phone and the Xbox and the two front showed connected and functioning with the device. But the computer does not connect to the internet. Help, please!

  The message "the network password needs to be 40bits or 104bits depending on your network configuration. "This may be criteria such as 5 or 13 ascii characters or 10 or 26 hexadecimal characters" means that the system used encryption is WEP (instead of WPA or WPA2).  Although it is the lowest available wireless security, now that I think about it, I'm a little surprised that the mifi comes with a wireless security is enabled.

  There are at least 3 different "passwords" potentially used by your device.

  1. There may be a password that allows the device to connect to cellular service.  As far as I can tell from the manual, it is a "PIN code" that may or may not be required by your cell carrier (i.e., Verizon).  See page 15.

  2. There is a password that gets access to the configuration of the mifi utility.  This is the password that is supposed to be printed on the back of the mifi AND displayed on the LCD when the mifi is turned on.

  3. There may be a password for encryption (or "network key") wireless as the wireless mifi and your computer is configured to use WEP, WPA or WPA2.

  The more I read the manual for this device, I am convinced that the default setting for wireless encryption is 'None' and the password on the back of the device #2 above.  On the other hand, I can't imagine how he could have set himself up for the WEP encryption.

  Here are my latest suggestions.

  1 reset the mifi to factory default.  Beside the decision-making when the power cord is connected is a small button.  With the power on, press and hold this button. The manual says only: "hold."  I would like to keep the button pressed for at least 20 seconds or until there is some indication on the screen that a reset has occurred. You will need a unfolded paperclip to press the button. See http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=50011#alt

  2. make sure that the battery is fully charged.

  3. turn on and confirm that the connection ('up' and 'arrows'), (e.g., 4 G LTE) service and the strength of the signal (bars) are turned on:

  

  4 wait about 10 seconds and then go to "View available wireless networks," find the one that matches your mifi (check to make sure that you do not have a neighbor with a mifi with a similar SSID) and click on connect.  You should NOT be asked for a password.

  5. open a web browser and enter the address 192.168.1.1 OR vz.hotspot in the address box and click GO.  You should see the following text:

  

  6. Enter the password of the sticker on the back of the mifi in the box and click on the button "Login".

  From there, you can follow the manual to configure wireless security settings.  Good luck.

• Unable to connect with the listening port of the client

  [oracle@rac31 ~] $ lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on March 21, 2014 03:33:30

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date March 20, 2014 13:33:30

  Uptime 0 days 13 hours 59 minutes 59 seconds

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/rac31/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.1.101) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.1.111) (PORT = 1521)))

  Summary of services...

  Service '+ ASM' a 1 instance (s).

  Instance '+ ASM1' READY State, has 1 operation for this service...

  'Cars' service has 1 instance (s).

  Instance "rac1" READY State, has 1 operation for this service...

  Service 'racXDB' has 1 instance (s).

  Instance "rac1" READY State, has 1 operation for this service...

  The command completed successfully

  In my server in the Oracle_HOME/network/admin

  This is my entry in tnsnames.ora

  RAC =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac-scan)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rac)

  )

  )

  I am able to connect with the command

  sqlplus system/password@rac

  However, when I give the same input on the client computer

  It does not work

  I am able to ping the host rac-scan successfully

  C:\Users\rgehi > ping rac-scan

  Ping rac - scan.oracle.com [192.168.1.113] with 32 bytes of data:

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Ping statistics for 192.168.1.113:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 0ms, Maximum = 0ms, average = 0ms

  C:\Users\rgehi > sqlplus system/password@rac

  SQL * more: Production of the version 12.1.0.1.0 Fri Mar 21 03:40:53 2014

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  ERROR:

  ORA-12545: Connect failed because target host or object does not exist

  I installed oracle client on my desktop

  and I made entries in the tnsnames file

  However when I connect to the database to rac with scan it works sometimes...

  not always...

  so I'm in search mode and finally, after many moons a lot and light years away, I found the following

  Here's what I did

  # - scan

  192.168.0.127 rac31 - scan.oracle.com rac31-scan

  192.168.0.128 rac31 - scan.oracle.com rac31-scan

  192.168.0.129 rac31 - scan.oracle.com rac31-scan

  I put three ip addresses in the host with the same name rac31-scan file

  then I put the same ip addresses in my windows hosts file

  Here are the entries

  192.168.0.127 rac31 - scan.oracle.comrac31-scan

  192.168.0.128 rac31 - scan.oracle.com rac31-scan

  192.168.0.129 rac31 - scan.oracle.com rac31-scan

  but in the (windows 7 pc) client tnsnames file has just one entry

  It's here

  RAC1 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac31-scan)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = RAC)

  )

  )

  and now when I connect from the client... it connects without any problems.

  I have tried more than 10 attempts without problem

  BINGO!

• Unable to connect with the network via iphone or ipad

  Unable to connect the Apple TV (2nd generation) with the network via Wi - Fi using the remote app!

  The remote application required the devices to be on the same network, and home sharing enabled on Apple TV. The physical remote control would be necessary for the installation if this has not been done already

• Unable to connect with the modem router e2500

  I have an old Speedstream 5100 modem hooked to my router e2500. Everything works well except if for any reason any my modem disconnects from the ISP I can not log in via the route to reconnect it. I need to connect a cable modem to computer direct run connect script then modem plug in router all is well again.

  Any ideas why the connection to the modem router is blocked?

  Thnaks,

  Al

  al_mathews wrote:

  My Speedstream has only an Ethernet connection so I did not know that he resembled a router for the local network. I changed the mode of bridge on the PPoE configuration on e2500 / Speedstream and reconnected to the ISP on the e2500 configuration screen. Who can solve the problem of reconnecting from now, it is run on the e2500.

  One thing I see now is since I left the modem IP set to 192.168.0.X can't do it all through the e2500. Is it because my DHCP in e2500 is configured with 192.168.1.X range IP modem is not covered in my network? If I directly connect Speedstream and place you IP 192.168.1.X will become visible on LAN?

  You are unable to access the modem even if you have a PPPoE connection. For PPPoE the E2500 will not need an IP address from the modem so it does not have DHCP on WAN port and so we never see. When you try to access the address of 192.168.0. * the E2500 it will route through the tunnel PPP to the ISP.

  If you connect your computer directly to the SpeedStream it should automatically get a DHCP address (assuming that the computer is still ongoing on the DHCP protocol and not with a static IP address and the SpeedStream does not automatically neutralize the DHCP server in Bridge mode). If you have configured a static IP address on the computer, you must change the IP address to an address of 192.168.0. *.

• Problem / connection with the client to view

  Our assessment notice.

  View Manager: 4.0.1 build-233023

  Discover the composer: 2.0.0.210930

  Reviews: 4.0.1 build 2029

  So far so good. We have created a dynamic office and were able to deploy desktop computers. We use an ad group to allow users to this pool.

  To access desktop computers in this pool via the web portal is no problem, but when the same user attempts to use the Client to view we get a message that authentication has failed. In the View Manager events, I got these messages:

  1 (SESSION: E2C6C98C7A5AB8A624450E4B70DB9A78; 8 D) XXXX\YYYYYYYY: 18B0AC59A9A16F3F0158209FC1CC26) the user USER; USERSID:S - 1-5-21-nnnnnnnnnnnnn; USERDN:CN=S-1-5-21-484522859-389107532-2199480311-219035,CN=ForeignSecurityPrincipals,DC=VDI,DC=VMware,DC=int; has disconnected from VDM

  2. (SESSION: E2C6C98C7A5AB8A624450E4B70DB9A78; 8 D) BROKER_LOGOFF: USER: 18B0AC59A9A16F3F0158209FC1CC26 XXXX\YYYYYYYYY); USERSID:S - 1-5-21-nnnnnnnnnnn; USERDN:CN=S-1-5-21-484522859-389107532-2199480311-219035,CN=ForeignSecurityPrincipals,DC=VDI,DC=VMware,DC=int;

  The strange thing is, I left all this next door for a few minutes and tried to connect via Client discovered again later. This time, it worked, but at the opening of the session of office (office of screen already appeard) closes the windows desktop without any message. After you start the Client view again, the authentication will fail again.

  Time is synchronized in all entities.

  Any ideas, tips, solutions?

  
  AWo
  
  VCP 3 & 4
  
  \[:o]===\[o:]
  
  = You want to have this ad as a ringtone on your mobile phone? =
  

  = Send 'Assignment' to 911 for only $999999,99! =

  What ESX version are you running?  They had the 4.0 update number 2 with PCOIP, http://kb.vmware.com/kb/1022830.

  The opening of autologon, I guess that we refer to log in as current user box?    I have seen issues where if I leave my PC to the top and running for long periods of time it fails, but a simple reboot fixes this problem.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Unable to connect with the sysadmin user applications

  Hi all
  
  We cannot connect to applications with user sysadmin
  
  check all possible alternatives of there we cannot connect and finally we program the password by FNDCPASS
  
  VERIFIED SOLUTIONS:
  ==============
  (1) locked account - no.
  (2) Guest user password - valid and check with to validate the password function
  (3) checked tablespace APPS_TS_IDX space - enough space available
  (4) checked signon profiles all who are very well
  (5) No person changed the password before there is no activity for 2 days
  (6) active in fnd_users and all are looks good
  sysadmin 7) validation through fnd_web_sec
  
  Select apps.fnd_web_sec.validate_login ('SYSADMIN',' & pwd') of double; -display "N".
  
  Finally reset us the password with fndcpass but the customer claim the CAR for that matter
  
  Please give me your valuable inputs to this so that it will be useful in the future to support
  
  
  
  Thank you
  Pavan

  Hello

  So in my case the hash value has been changed according to the post above to right?

  In your case, the password has been changed and this has changed the hashed password that is stored in the table. When you have provided the initial password, the FND_WEB_SEC hash and compares with the hashed value and it returns N because the hash values do not match.

  Can U please tell me how this change in the hash if no users changed the password earlier?

  It represents the value has changed because the password has been changed or the hashed value has been changed manually.

  Thank you
  Hussein

• Unable to connect with the WRT54GLS interface with v34.0.5

  And the error is misleading. Fortunately, that is, knows there is a certificate problem and allows me to connect. Not sure when this problem reappeared in FF, but I coulod still not connect, a month earlier, perhaps with a few v33?

  You can install a portable version of Firefox (ESR) to access Web sites that do not work with the current version of Firefox.
  The portable version comes with its own profile folder and does not interfere with the currently installed version.

  • http://PortableApps.com/apps/Internet/firefox_portable
  • http://PortableApps.com/apps/Internet/Firefox-portable-ESR

• NB100 - unable to connect with the ethernet cable

  My netbook works very well with the wireless connection (even if I get only 4 MB when I have 10 MB connection). I visited a House of friends the other day and she does not have a wireless router.

  I plugged the cable broadand on my machine. I disabled the wireless connection and activated the network connection in network connections. I turned off then the feature wireless on the keyboard with the keys Fn & F1.

  It shows that there is a link in my taskbar, but when I try to open the internet it does not connect.

  I thought it was his connection because she had problems so today I went to another friends house and got exactly the same response.

  I decided to try the same thing at home and I disconnected the ethernet cable from my wireless router and performed the steps listed above.

  Still no joy - am I missing something?

  Tips:

  Use a static IP address, and not using DHCP.
  Disable your firewall. It can block the network connection.
  Disable network cards won't do not. If you use wired LAN, turn off wireless and Bluetooth in the Device Manager.
  Check if their ISP requires a power of Attorney, if they don't, specify the Proxy and Port in your browser settings.

• Printer on Windows 7 PC, unable to connect with the laptop with Vista

  I have a Lexmark 2600 Series printer on a Windows 7 32-bit computer.  I am not able to connect to the printer with Vista laptop for my wife.  I can share files and see the printer.  I try to connect and I get "Windows cannot connect to the printer. Impossible operation completed (error 0x000003eb). "I tried to install locally and change the path without success.  Any help would be much appreciated.

  Hi Zyfot,

  First of all, I would say that you add the printer on the vista computer and check.

  1. open Printers by clicking the Start button, clicking Control Panel, hardware and soundand then click Printers.
  2. click on Add a printer.
  3. in the Add Printer Wizard, select Add a network, wireless or Bluetooth printer.
  4. in the list of available printers, select the one you want to use, and then click Next. If your computer is connected to a network, only printers listed in Active Directory for your domain are displayed in the list.
  5. If prompted, install the printer driver on your computer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  6. follow the steps in the wizard and then click Finish.

  Install a printer on a home network
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Also, make sure that the print spooler service is running on the windows vista computer.

  A print spooler is the service that temporarily stores the disk printing hard or in memory until the printer is ready to print.
  You must be logged on as administrator to perform these steps.

  1. open Administrative Tools by clicking the Start button, then Control Panel. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. right click on the print spooler service, and then click Properties.
  4. under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fire power User Agent is unable to connect with the power of fire management center

  Hi Cisco supports,

  I have problem with firepower User Agent, when I want to add a power of fire management center agent, then I get the error "cannot connect to the management center of firepower." You can find the error in the attachment! I have already added the User Agent in the CMF.

  My Version of power of fire management centre is 6.0.0.1

  and my 2.3 10 User Agent

  Hello

  You don't need to open it manually. If you have added the CMF officer, then it should be opened by default. What I wanted was to ensure that there is no intermediate firewall between the agent and the CMF.

  You can capture packets on FMC cli and check if traffic reaches here.

  > tcpdump-i eth0 port 3306