Display in the Finder does not

Similar Questions

• WVC210 display of the camera does not

  Hello

  I have a wvc210, the small LCD screen on the camera does not do anything, so I can't determine what IP it works stop. The lights work and it starts ok.

  Any suggestions?

  Hello

  First of all, I'm sorry that you are having problems with the camera.

  My first recommendation would be for you to contact the support center at 866-606-1866 so that we can determine if the device is under warranty and replace it.

  If that's not an option, or you already know the product is supported and given that the device works properly, what you can do is look in the DHCP table and find the MAC address of the camera, in this way you now the IP address that uses and will be able to connect to it.

  In addition, if it is not an option, you can download a network scanner (several free on the internet, as always, Google is your friend), the scanner and find the MAC address.

  Once you have found the address, connect to the device and assign a static IP address so you will always know how to access.

  I hope that was helpful.

• display of the Tablet does not work, but is external?

  I have an x 200 tablet with Windows 7 (clean install) and all the latest drivers.

  When that I start, the screen of the Tablet works fine, even displaying the Windows page at startup.  But then it fades to a pale gray, where the background is not very visible.  When I connect to an external monitor via VGA, the external monitor works fine while the tablet screen is not.  If I try to restart, the two screens work well all stop and start the dos system, but the tablet screen fades again at the same point when starting up?

  Any ideas?

  It could be the graphics driver, being discussed in this post.

• Massive update of the title in the display of the grid does not

  I am currently using Lightroom 5.6.  I used to be able to select multiple photos using the grid in the library module and change all the titles of the photos for the same title.  Now, this procedure doesn't seem to work.  It replaces the title of only the first photo in the selection.

  Please suggest a procedure to achieve this.

  Make sure that metadata > show metadata for goal Photo only is not checked.

• G41 hot volume buttons or the display on the screen does NOT load

  Hi all any ideas or links to get my keys and loading screen. I have a g41 with xp pro 2886 5tu.

  Thanks again

  Jim

  You may need to enter in C > drivers > win > Hotkey and run the Setup file from there.

  Good luck.

• Sierra: Finder does not display the modified files

  I just upgraded all my Macs and minis to Sierra 10.12 and have run on something that looks like buggy.

  My usual use of a Mini special is transcoding many video files, and I have a collection of (painfully tedious) shell scripts that manipulate file names, do the transcoding and moves the files to one directory to another to make this work. In * most * folders that I see in the Finder when a file is moved to the directory it shows in the Finder correspondent discovered, but in * some * of them, the Finder does not update when a new file is moved to the underlying directory, is renamed or deleted entirely.  For example, I see there are 28 video files to be converted into a directory named FLOOR TRANSCODE using ls - ls in the terminal, but only 6 looking at the same folder in the Finder.

  These scripts have been working for several years on this material under El Capitan and Yosemite.

  Records I've noticed so far are all in the root of the drive HD server, not under no/Users. Finder appears to display all files when displaying the files moved to USB external drives for storage after transcoding. Another element that might be relevant, is that my normal view of the mac is via RDP (Remote Desktop "headless", no physical monitor in use).

  Have you noticed something similar?

  This Mac Mini is late 2012, MacOS Sierra 10.10

  I'm not much of what you have written (for example, I don't know what "RDP").

  In any case, based on the title of your post, I will answer how to find files "changed" in the Sierra of MacOS.

  I just use the search box and type "Date: today".

• Mac Mini - Finder does not open

  I have a Mac Mini with os x 10.10 2014.  The boot disk was almost full and the finder does not open.  I open the iPhoto and deleted the pictures and then empty the trash in iPhoto.  By logging in as a different user, I see I have ~ 1 GB of space, but when I log on my main account and admin the finder does not always open.

  I read that it was a known issue:

  http://forums.MacRumors.com/threads/Finder-doesn.

  It is said to remove the .plist files, but I can't get to Terminal to do.

  Please advise, thank you!

  Edmund

  If you were able to connect as another user, the issue is not lack of storage - this is the same computer.

  Yes, your .plist file may be corrupt, or you could have an extension conflict that affects only your user account.

  Try the start mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system does a lot of cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• Finder does not show folders

  Hello

  I have a macbook Air 13 "bought in 2011, it has OS X 10.9 Mavericks installed and since yesterday the Finder does not work. When I open it it does not show a folder or a document, and it shows strange reasons (reminds me when my old Windows crashed).

  Here you will find some screenshots.

  Important to note is that if I use a projector I can find the files, then open them. Also when I upload an image on the internet and I have to select from the computer via the Finder (regarding the screenshots attached), it works well. In addition, as you can see from the screenshots, on top of the viewfinder, I can see the files and I can open them somehow. If I change the view of the researcher, song to a list, so I can't see anything and can not open files.

  I tried to restart the computer, turn it off and turn it on all by pressing the SHIFT key, but it does not work. Interestingly, when I force to quit the Finder application and I re-launch, for the first 10 seconds, it works, then it stops working.

  Do you have an idea what could be the problem?

  Alex

  

  

  Unfortunately I have a hardware problem with RAM or graphics chip.

  If your MacBook Air has been purchased after July 20, 2011, he probably has a material test integrated.  You can find starting with'd ' key.

  If it isn't you will need the installer original discs/flash drive that comes with it.    If missing, call AppleCare.

  You may also be able to get a disc to test material created with this link:

  https://github.com/upekkha/AppleHardwareTest

  If Apple Hardware Test reveals no problems, it is more likely that the RAM is an issue than any other thing: *

  http://www.macmaps.com/BadRAM.html

  * Links to my pages give me an allowance.

• T410 doesn't start, white screen and the keyboard does not power on.

  Hi, my laptop Lenovo T410 does not start. I hit the power button and looks like it is about to start. The thinklight flashes on as normal, the cd drive is checked, the caps lock on, then nothing/button blinks. No display and the keyboard does not respond. Power led lights up; If I leave it awhile the fan turns on. Can I stop the machine using the power button, but the problem remains the next time I turn it on.

  I tried to remove power and battery, power 10 button time then with the power to 30 seconds, before replacing the power supply and the battery but nothing happens. I tried to use a different keyboard. I tried to plug in an external monitor. No change.

  This problem appeared after I left it on overnight. I have the feeling that it entered into hybernation mode, perhaps, and that it disturbed some important functions which he could not complete. Not sure if. Any help gratefully received.

  Thank you very much

  Pete

  It's the original configuration of your laptop:

  ThinkPad T410 2522BF1
  
  i5 - 520 M (2.4 GHz), 4 GB RAM, 160 GB 7200 RPM HD, 14.1 in. LCD 1280 x 800, Intel 5700MHD, DVD, Intel 802.11agn Wireless Modem, 1 Gb Ethernet, UltraNav smart, secure, camera, 6 c Li-ion, Win7 Pro 32

  I firstly the LCD cable or secondary LED could be damaged, but if you don't see anything on an external monitor I tend to think it's a motherboard problem.

  Last thing you could try putting running a Live Distro Linux from a CD/DVD or USB drive, using Ubuntu or Linux Mint, for example.

• After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.

  After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.
  Mac OS X 10.7.1
  Firefox 6.0.2
  Flash 10.3.183.7

  The current versions of Firefox are 64-bit on OS X, if you need a 64-bit version of Flash with Firefox 6.0.x or you must start Firefox as a 32-bit application to be able to use a 32-bit version of a plugin.

  1. Closing of Firefox
  2. Launch the Finder and open the Applications folder
  3. Make a right click or Ctrl-click the icon of Firefox.app
  4. Select "Get Info."
  5. Select or deselect the option "open in 32-bit mode".
  6. Close window "Firefox Info"
  7. Restart Firefox

• I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help!

  I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help! I've tried everything. Google it. Searched through itunes, etc. It MUST be a bug, because it started right after I accepted the 12.3.3 update on my laptop running Windows 7 32.

  I count on the part of the main screen, which is not. Its strange. PLEASE HELP ME! In addition to the main page of the Itunes Store, everything else works fine as before. Music from my library work screens, etc.

  I also have exactly the same problem since the last update. Tried to find a way to solve the problem but no luck. Someone please help!

• my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• How can I click apply when switching back resolution lower when the window does not display the Apply button when

  How can I click apply when lower resolution when the window does not display the button apply because the resolution is too low

  Hello

  Try pressing the ENTER key on the keyboard instead.

  See you soon.

• Windows 7 Ultimate lights up and the screen does not display on my screen

  The title says it all.

  Hi Brandon,.

  Thanks for posting your query in Microsoft Community.

  It is regrettable that the PC does not turn on and I'll be happy to answer your query. Let me ask you a few questions to help you accordingly.

  • What is the brand and model of the computer?
  • Remember to no particular change in the computer before the show?
  • When was the last time you were able to use the PC?
  • Do you have Windows 7 repair disc?
  • Do you have connected an external device to the computer (except keyboard and mouse)?
  • When you try to start, you are able to display the logo of the manufacturer?
  • You are able to start the computer in safe mode?

  There could be several reasons according to the questionnaire above for this issue, including hardware as well. Hardware and software configurations can vary considerably, there are several ways that you can take to solve problems that might prevent Windows to start (boot) correctly.

  I ask you to follow the steps described in the article below:

  What to do if Windows does not start correctly (information valid for Windows 7)

  Notes: Please, don't try installing and reinstalling Windows section from now.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.