Display is switching

Similar Questions

• Prevent the display of switching when the laptop lid is closed?

  Hello

  I am looking for a way to prevent the display of switching when I close the lid of my laptop. On my old laptop, Windows XP, I could open the cover while watching a movie on a secondary antibody (TV) to display for example to check something on the web on the laptop screen - displays remained as they were. But under Vista, whenever I get close or open the cover, screen goes on television and laptop as a result and the whole process takes some time. This behavior remains the same even after the deactivation of TMM in Vista.
  Is there a solution to this problem?

  Thanks in advance.

  SOLUTION VERY SIMPLE:

  1. open Device Manager
  2. in "System devices" find "ACPI lid"
  3 open the properties for "ACPI lid" and go to the tab "driver".
  4. Select "Update driver".
  5. Select 'Browse my computer for driver software' and 'Let Me pick "...
  Uncheck the "Show compatible hardware".
  6 and now, 'Manufacturer' select "(Standard système truc) ' and model:"
  'Volume manager' (Yes, 'Manager of Volume')
  7. then, then restart the system and it works!

  ON WINDOWS 7 x 64

  (Post Found: http://forums.whirlpool.net.au/archive/1421975 )

• map display and switches

  I created each of the British county borders in the form of spreadsheets for each of the coordinates, the coast is not too defined as it is not necessary to be specific in this area.

  What I want to do is turn each of the areas of the County into a clickable switch to control the application, forcing the XY graph to re - load only the single County with other overlay information, ideas on how to make an irregular object behave as a control without changing its appearance?

  The attachment shows the card, this may seem a bit strange at the moment but Wales and Scotland are currently not included - Mike

  Hello

  You can use the generation of functions to get the value of a pixel in an image control (see attachment).

  Now you can create a copy of the image and fill areas counties with a unique color by using your favorite image manipulation application. Create a look up table (i.e. a list of countys and their colors) and to find the County to the color selected in the displayed image.

• Temporarily display fixed switching engineering

  I have an old Casio with a button that will take a long number and display in the format of engineering. The hp 50g has a feature like this, without going through the menu mode and changing the display can have change back?

  Hi, mindheavy!

  You can use the menu 64.01 (enter 64.01, MENU and press ENTER). Save the list {{' FMT' < < 64.01 MENU > >}} in the reserved variables "CSE".

  

  Now, you can access the CUSTOM menu by pressing the keys [LEFT Shift] and then [MODE]. Enter the number of digits after the decimal point, and then press the [ENG].

  

  To return to difficulty mode, you can enter the number of decimal places and press the [FIX].

  Also you can use the additional programmable button in the CUSTOM menu which activates the following program:

  < < 9 - > n < < FS 127? IF THEN 128 FS? IF THEN 128 CF 11 FIX FOR ANOTHER 128 SF 11 ENG 127 CF END ELSE
  127 SF STD END > > > >

  Name it 'EFM', i.e. 'STD <>- FIX <>- ENG"and add it to the variable"CSE ". Save the new list {{'FMT' < < 64.01 MENU > >} {'SFE' < < 9 - > n < < FS 127?}} IF THEN 128 FS? {{IF THEN 128 CF 11 128 of ANOTHER DIFFICULTY SF 11 ENG 127 CF END of ANOTHER 127 SF STD END > > > >}} in the reserved variables "CSE".  To change the number format simply key [F2] (run program "SFE").

  

  STD MODE.

  Press [F2]:

  

  DIFFICULTY MODE.

  Press [F2]:

  

  ENG MODE. etc.

• Portege R700 with docking station may not automatically switch to the external display

  Hello!

  In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.

  Now we have a little problem with the new R700 model: PT318C - 00G 001,
  We bought 30 of them.

  WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
  It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
  It's really not easy to use for our users...

  With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.

  We are on Windows XP Pro SP3.

  I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...

  Thanks for your help.

  Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
  Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.

  Also try a BIOS update (v1.70 is the last one I think).

• Satellite 5200-device display 801:Quick switch (Fn + F5)

  I have a problem regarding the fast display device switching "pressing the (Fn) with (F5)" nothing happen as usual... does everything body knows how to fix it!

  Thanks in advance.

  my laptop is 5200-801 with Nvidia 460Go with 46 MB.

  Hello

  If you change with FN + F5, you need the Hotkey Utility from Toshiba! This can is located on your CD of tools or Toshiba download site!

  Good bye

• The Satellite A200 display does not illuminate after being idle for 15 minutes!

  Hello!

  I just bought a Satellite A200 1 - AX PSA6 and install Windows XP SP2 + upgrade of bios for winxp.
  After 15 minutes of unactivirty (no not pressing the keys or moving the mouse), I set in power options in Control Panel - what must power OFF display.
  After this time display is switched off (black)!

  But I can't wake up my laptop!
  I'm press any key or move the mouse, but the screen is always black!
  But laptop works!
  I can ping and then by network or remote access connection.

  One way to solve this problem:
  Laptop open and close!
  A200 - "standby mode" and wake up with swithches on screen...

  Hello

  It seems that Windows XP Home edition does not work perfectly on the new laptops designed Vista. Before you live your laptop try to change profile settings (extended battery) power and test the parameters of this profile.
  Tomorrow I'll try to install Windows XP Home on my A200 and I'm really interesting if I even notice.

• Issue a Qosmio X 505-Q870 - BSOD and display

  I get BSOD frequently (at least twice a week) and hope someone could help me with this. Unfortunately I do not have the minidump files, but I don't know the names of the files that caused it... Is the reason why I did not have the minidump files - the minidump file gets deleted after that I reload, I did not delete them manually...

  But I got a copy of the file when I had last week and I sent it to an admin in another forum, that's what he sent me

  "caused by:

  2: kd > lmvm nvlddmkm
  start end module name
  fffff880'0f4ec000 fffff880'10147300 nvlddmkm T (no symbol)
  Loaded symbol image file: nvlddmkm.sys
  Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Image name: nvlddmkm.sys
  Timestamp: Thu Mar 17 09:08:59 2011 (4D81C19B)
  CheckSum: 00C6915C
  ImageSize: 00C5B300
  "Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4"

  and yesterday, after the bsod, I ran to see blue screen and it showed that 2 files were involved.
  1 dxgmms1.sys
  2 dxgkrnl.sys

  I guess it has something to do with the VGA, I also sometimes have these boxes of weird colors on my screen and when I move around the window that is open at the time, she disappears - these boxes began to appear on and outside of the time that I started using the laptop... Please note that I have the latest VGA drivers installed...

  Another issue that really bothers me is once the display is switched off automatically, I can't put it back on, I have to restart the laptop! After the screen saver, I put it to disable the display in 15 minutes, so when it is off, can not get the screen to the top... but I've heard fans work so I know that the pc works... even USB devices work... but what I do, the screen is just blank... It was not always like that, it happened after updating drivers in February (I think) and I kept the drivers up to date since then, but this problem persists...

  Really hope that someone will be able to give a quick solution and permanent on this subject. I bought this the United States and who are currently living in Australia, do not know the validity of the warranty...

  null

  If you see blocks of colors on the screen while using the provided Toshiba display driver, which usually indicates a problem with the hardware.

  I would like to send the phone in for warranty repair in a center of Service from Toshiba.

• Acer toggle display does not display when you use the Fn + F5 key secret on my Acer Aspire 5560

  What it does:

  When you use the Fn + F5 key combination on my Acer Aspire 5560, it brings up a screen changes on the laptop screen for the selection of an external monitor, I am currently using Windows 7 Ulitmate

  Before the problem:

  Display mode switch Acer existed prior to the upgrades of the drivers

  The problem:

  The toggle screen Acer does not display when you use the Fn + F5 key secret on my Acer Aspire 5560?

  Additon Information needed to solve the problem or any other information:

  I would like to know what driver or software operates the Acer toggle display Mode?

  Also where can I find this driver for computer: Acer Aspire 5560 to bring this Acer toggle display Mode function?

  Acer Toggle display Mode: this is a picture of it when you use the Fn + F5 combination:

  

  Thank you very much Ironfly Ace, it has worked Acer hero of the day

• How to change the ID ID/monitor display or erase display ID/Monitor ID Windows 7

  Have a problem that sometimes appears.

  Setting up workstations to work with multiple display monitors, its part of my job...

  The real ID monitors get Windows isn't usually a problem, most programs can adapt to the windows settings and fine.

  BUT some of the systems we run sends commands and tips based on the actual number of the display, the number which appears on the screen when you click on the button "identify" in the Office/display-settings of the control panel.

  Allows to call the ID of display equipment

  the computer, or windows remember display´s EDID and stores the monitors already plugged into a list?

  If I installed the monitors/screens in the order correct, everything is good and works as we wanted.

  Then, it happens a brakes display or switch place for a reason, or perhaps a driver update resets the display list and windows starts now monitors in the wrong order.

  the monitor 1 want to have HW - ID 1 to now HW - ID 2, and everything is false, messages and orders now find themselves on the wrong display.

  We have 3 options.

  1. fix the HW - ID display

  2 - re - configure the system and what it includes and hope that he will not return to the display switch change or updated driver.

  3 - re - install windows and hope that it shows the correct ID and continue with client applications and so on.

  I discovered that it is stored somewhere in the REG-Edit, but it is impossible to find the right place

  After talking to HP, they do not support such things... try windows-problem, with a clean install... c - my I switched to a screen!

  Tried to clean facilities of AMD and Nvidia driver for graphics cards, worked for a time, until I restarted the machine, back to square one...

  Then they ponited at Microsoft.

  After talking to Microsoft Support they do not support such things...

  I don't have the skills, but I can't be a problem with a script that removes the EDID reg-edit list after a reboot?

  then it would be not so complicated, simply:

  Unplug everything except the display that you want to be number 1
  Run the script

  reset

  connect the display 2 and so on?

  Hello

  I understand that you are not connected to the domain. But it seems you're a developer and you try to change the logical numbers of monitors/screens. This is why it would be better suited in MSDN Community.
  http://social.msdn.Microsoft.com/forums/en-us/categories

• D620: Cannot use an external video display attached to the laptop

  Latitude d620 Windows XP sp2, when I toggle the nothing affects F8 happens, no external monitor is attached. The gray little info-box representing a portable external video display and ad got a title: history of the "presentation Mode is:" the computer:

  1. Windows reinstalled by the assistance service
  2. laptop connected to an external LCD display "." Switched by F8. Successfully
  3. Intellitype pro 5.2 Windows and installed intellipont (mouse and wireless keyboard)
  4. some problems with the observed keyboard characters
  5. IntelliType pro 5.2 and uninstalled intellipont
  6. Cannot use the F8 key to switch between the display of the laptop and external display
  7. Impossible to step to the point 2 with recovery system

  So I'm stuck any suggestions to fix this?

  
  

• Where is the continuously rasterize switch after effects 5.5?

  I want to use this switch on my vector graphic layers but not everywhere, and nothing comes up when I search in the help. Is someone can you please tell me where I could find it?

  Thank you very much!

  You must display the switches column.

  You said you tried to search. What you're looking for, exactly? When I did this search, I found the information I have linked you above.

• Message on the screen 'BD - J' drive Blu - Ray - Satellite-P50t-B - 10 K

  First, a comic book, first playing a message saying "the AACS key has expired. You will not be able to listen to some Blu - ray titles. You want to download from the internet now? "Click Yes, it is downloaded, update has been applied, reader closed and restarted."

  BD reinserted, saying "while he was playing a BD - J, mouse operation title and keyboard shortcuts are ineffective" message. Down in Google to find how I was destined to do work the reader saw that keyboard, mouse and touch screen had no effect. Read a few posts that say the arrow keys / directional are supposed to be used to fight against it, but they do nothing when I tried.

  Only things I can do with a BD disc in the drive is: opening and closing; maximize/normalize clicking via the touch screen anywhere on the drive; Right-click with limited function (display power switch and open Information from).
  I hate phone calls so don't really want to phone Support, someone at - it ideas what is happening and what I can do?

  What software did you use to play the disc comics and movies?

  If the error appeared using the TOSHIBA Blu - ray disc player, the solution is not very complicated.
  You need to update drive Blu - ray TOSHIBA by TOSHIBA Service Station.

  This doc may also be useful for you:
  http://support.Toshiba.com/support/v...tentId=3495688

  If you have received this error message by using the patch to update software of WinDVD V8 Blu - Ray player

  Details: http://aps2.toshiba-tro.de/kb0/TSB4503L90001R01.htm

  Greetings

• Satellite S2450-202 - multicolored flashing pixels

  Hello world
  I have big problems with my Satellite S2450-202.

  Now it hangs whenever he feels like it, sometimes after a few minutes, sometimes after an hour.
  When I turn it on it starts as normal and load my normal desktop page then without warning the screen freezes and I get multicolored flashing and the displacement of pixels which change to the smaller pixels white/gray/black, forming lines on the screen. If I leave it alone, it restarts finally saying that the computer is not stopped correctly and begins with the tool running and checking the status of the disks disk check to find errors, but do not find anything.
  I have not loaded something new or changed settings, the laptop is now completely unusable as it is.
  Can someone help me?

  I am running windows xp service pack 3
  The notebook computer is a Pentium 4 2.80 ghz with 512 MB ram with 420 graphics from nvidia ge force.

  This model of laptop must be 7 years old and I m did not ask something like this starts happening after so long.
  It is not easy to say what the problem is here, but I guess it must be because of malfunctioning of the graphics card.
  To verify this connect external screen to the laptop, desktop to external display only switch and check what is happening here. If the same thing happens again it's graphics card problem without a doubt.

• Portege M300 Fn + F5 key does not

  Hello

  I'm running a M300 on Advanced Port Replicator II. Recently, the Fn F5 (laptop, keyboard) and assigned right Ctrl/Alt/F5 key combos have ceased to display the selection sequence of the computer/laptop screen laptop + external/External. All that happens when I press thise is the display switches between the laptop and the laptop computer and external screem, but basically the screen of the laptop stays on while the laptop gets very hot.

  Two other keys are also not stand-by - presentation and Toshiba Assist button button - could it be connected somehow?

  Operating system is Windows XP Pro SP2 updated.

  Can someone advise me?

  Richard

  Hello

  Check these tools:
  Utility to modify the device, call display for external monitor, Hotkey utilities for display devices.

  As far as I know all the tools theses are responsible to properly display the switching device.
  Try reinstalling these tools.

  Have you also used the recovery CD?