display list, ranked by the help of the DATE

Similar Questions

• You want to remove 'Pocket display list' down to the bottom of the list of bookmarks.

  Under Favorites drop-down list is "View Pocket List", just below "Show bookmarks". It appeared when you offered 'Pocket display list' or I can inadvertently adding it. I didn't do it! I would like to remove it but I don't know how.

  Thank you!

  Thanks the kenkon and cor - el.

  I could remove the Pocket button on the Navigation bar, by right-clicking the toolbar button. In addition, "Display list of pocket" removed himself from the drop down under bookmarks as well!

     https://support.mozilla.org/kb/disable-pocket-firefox
  

  Yay!

• AF:tree does not display a hierarchy in the data

  Hi all
  
  I'm using Oracle Jdeveloper 11 g R2.
  
  I created a display object based on a SQL query access in pipeline service packaged as shown below:

  SELECT * FROM TABLE(app_menu_mgmt_pack.tNavigationalMenus(:paraBindUserIdentifier, :paraBindMenuIdentifier))

  This query returns menu_id, menu_label, menu_base_id menu_id corresponding to the attribute relative to menu_base_id.
  I then created a viewlink that retrieves recursive data, based on menu_id (source) and menu_base_id (target).
  
  I have created af:tree in a page based on the view object and added rules for free recursion. When I run the page, it does not display the data in hierarchies.
  
  I use the functions of pipeline in view, not possible complete recursive tree (af:tree) as a data pipeline and not returned at the same time? Or I have to use other properties to achieve this.
  
  Any help will be much appreciated.
  Thanks in advance.
  
  Concerning
  Bilal

  Usually the component table tree will not use instances of detail added to the data model of the module application uses rather accessor based rowsets view link to show their children. So when you use static linking variables then it will automatically bind variables, but when you set a bind variable dynamically accessor focused view link on the sets of lines not have the bind variable will define which thus will display the data of the child. So try setting the binding settings of the accessor of link to display for the parent of the current address line row.

  Thank you
  TK

• Display of information from the data CAN at a gauge table

  Hello

  I'm new to Labview and just know the basics. I use a sample code to send and receive messages CAN. I need to view the data of received messages (only the first two bytes) on two gauges, i.e. the first two values of the data matrix. Is it possible to do? Also, it would be useful if I could control the value of the first byte of data using a button or dial. Any help would be appreciated.

  Thank you

  Brian

  Hello Brian,.

  You can use the "Subset of the table" function in your range of tables in your diagram and choose zero index and size two (2 items out of the table) in order to extract the first two values.

  Here is a link to the help of the service document:

  http://zone.NI.com/reference/en-XX/help/371361E-01/Glang/array_subset/

  You can have all of your comments as a control and set the default values for the items you want to change. You can access this property by setting the value on the control, and then right-click on it to go to the "information Operations" then 'Create this value default value'. Then, you can right click the control you want to change and replace with a dial. Make sure you only select properly its representation. For example, a byte you would probably select U8.

  Attached is an example, please take a look and let me know if it helps.

  Kind regards

  Michael S.
  Technical sales engineer
  NEITHER UK & Ireland

• How to display each month between the date range

  I want a query that gives me the number of months between two dates given for example, if I going January 1, 2009 and April 1, 2009 then I should get on February 1, 2009 and March 1, 2009 in my trips
  
  Thank you very much

  Srix wrote:
  Thanks for the request

  It is not working do not when the effective date is differs from that in a year i.e start date January 1, 2009 and end date February 1, 2009, that it does not give u then required result

  I don't know what you mean? The dates are in the same year.

• How to display null rank against the zero amount?

  Hello PL/SQL gurus and experts.
  
  I use Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64-bit Production version
  I now of paintings
  

  DROP TABLE T;
  create table T(Name, Symbol, Amount) as select
  'Anderia', 'AA', 1050000 from dual union all select
  'Michael', 'ML',150000 from DUAL union all select
  'Bill', 'BL', 1050000 from dual union all select
  'Nancy', 'NY', 4000 from DUAL union all select
  'Anderia', 'AA',3000 from dual union all select
  'Michael', 'ML',1050000 from DUAL union all select
  'Bill', 'BL', 1200000 from DUAL union all select
  'Anderia', 'AA', 1200000 from DUAL union all select
  'Derek', 'DK', 0 from DUAL union all select
  'Chelsia', 'CS', 0 from DUAL union all select
  'Vish', 'VH', 1200000 from DUAL;

  If I use the next question then it displays the rank 6-Derek/g-

  select name, decode(grouping(symbol), 0, symbol, 'Total'), sum(amount), round((sum(amount)/max(total_amount)) * 100,2) "%Total" ,
  dense_rank () over (order by sum(amount) desc) as RANK
  from (select name, symbol, amount, sum(amount) over() total_amount , sum(amount) over () from t )
  group by grouping sets((name, symbol), ())

  If I use the following question then it displays not Derek/g entries.

  select name, decode(grouping(symbol), 0, symbol, 'Total'), sum(amount), round((sum(amount)/max(total_amount)) * 100,2) "%Total" ,
  dense_rank () over (order by sum(amount) desc) as RANK
  from (select name, symbol, amount, sum(amount) over() total_amount , sum(amount) over () from t WHERE amount>0)
  group by grouping sets((name, symbol), ())

  I can't wait for the next release-

  NAME    DECOD SUM(AMOUNT)     %Total       RANK
  ------- ----- ----------- ---------- ----------
          Total     6907000        100          1
  Anderia AA        2253000      32.62          2
  Bill    BL        2250000      32.58          3
  Vish    VH        1200000      17.37          4
  Michael ML        1200000      17.37          4
  Nancy   NY           4000        .06          5
  Derek   DK              0          0          
  Chelsia CS              0          0          

  All thank you guys in advance for your help and I really appreciate it

  Check this box:

  SELECT name,
           DECODE (GROUPING (symbol), 0, symbol, 'Total'),
           SUM (amount),
           ROUND ( (SUM (amount) / MAX (total_amount)) * 100, 2) "%Total",
           CASE
              WHEN SUM (amount) > 0 THEN
                 DENSE_RANK () OVER (ORDER BY SUM (amount) DESC)
           END
              RANK
      FROM (SELECT name,
                   symbol,
                   amount,
                   SUM (amount) OVER () total_amount,
                   SUM (amount) OVER ()
              FROM t)
  GROUP BY GROUPING SETS ( (name, symbol), ());
  

  See you soon,.
  Manik.

• How can I make the date of the message appear with time for unread messages?

  Messaging systems that I spend show the date and time with the messages. I need this poster to determine the aging and the importance of the received mail. What archive/old economy mail help to drop off mail and not duplicate archived messages.

  Thunderbird displays the time and date for all messages except for the messages of today. Only displayed for today and the date is added at midnight.

• APEX4: How to create a report whose data are based on the date of entry of the user fields

  With the help of 4 Apex I create a report that allows the user to enter two dates and displays a report between the date range.
  
  How can I do this?
  
  Thank you.

  Go to Actions > filter in your IR and ther, you can create several conditions to filter your report.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• While the loop records all the data

  Hello

  I have a LabView program containing two while loops. The first is used to increment a frequency on our machine and the second, which is located in the first, used to take a certain number of points of data to this frequency. After taking these data points, the frequency is supposed to rise again. This happens for a set number of times.

  The problem I have is that the data file as the data points in the second then the loop are supposed to be written in does not display do not all the data points in the program should have taken. For example, if we want the first loop increment of 10 times and the second to take 5 data points every time, we expect to see 50 data points in our files. But we see only 10. The watch file always only an amount of data points equal to the first loop iterations. If we cut our data at that time.

  Someone has an idea what could be our problem?

  
  

• Conditionally disable the date element

  Hello
  
  I want the following feature: when I choose 'no' to a radio button item, I want a date become invalid selector element. I tried to use a dynamic action and it didn't work (it disables the regular text elements, selection etc lists, but not the date items).
  
  Thank you!

  Hello
  You can check the Radio point lov looks like the below

  STATIC2:Yes; 1, none; 0

  Return value is a numeric data type.
  Dynacmic measure status: equals
  Value: 0
  False condition: checked

  It works fine for me also.

  -Thank you,
  Logaa

• Help remove events on a part of the display list

  Hey all
  
  Basically, I'm looking for a 'switch' that I can use for valves of all events for a display object and all of its descendants in the Flash display list / scene graph.
  
  I have a display object with a good number of descendants who have various Auditors/managers MouseEvent assigned to them. I would like to be able to remove/disable all these events related to mouse (or just all types of events so it's easier) at some point in time without knowing the number of descendants or how much and what type of event listeners were recorded with each node.
  
  So apart from writing a method of removal of single event for each node and market then the list display, call this method for each node, how do I? Pixelation this object to a Bitmap object, and then exchange the two in the list view to get a version of 'static' with none of the managers is a work-around I don't really want to do either (sorry).
  
  any ideas?
  

  For mouse events, perhaps a combination of
  DisplayObjectContainer.mouseChildren and InteractiveObject.mouseEnabled

• A drop-down list in Axapta 4.0 box takes longer to display the data.

  Hi all

  I have a drop-down list box in Axapta 4.0, which takes about 10 seconds to display the data. The area of cobo contain the minimum data to be displayed. However, it takes more time than necessary. How to fix... Help me!

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you follow the link and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I also suggest that you send your request from the link and check.

  http://community.dynamics.com/product/AX/f/33.aspx

• Want to access a SOAP service and display the data in the external list

  Hello

  I could see a WCF Service via the type of external content successfully. Now I want to access a SOAP Service and display the data in an external list in Sharepoint 2010. I am able to create a data source with success with the SOAP service, but how to display the data in the external list as external list uses only as data sources for external content types.

  Also with WCF as external content type, it is only on WCF services or any kind of web services can be added as an external content type.

  Any help would be appreciated.

  Thanks in advance

  Hello sunny198218,

  The question you have posted is related to Windows Communication Foundation Service and would be better suited in the MSDN forum for category Windows Communication Foundation. I've included a link to the forum where you can ask your question.
  http://social.msdn.Microsoft.com/forums/en-us/WCF/threads

  Sincerely,

  Marilyn

• my 500 vacation photos are now on the lists section of the control panel-display wallpaper how to make their return to which they belong?

  Downloaded the camera vacation photos and sorted by them by putting each location days in it is a separate file. I also received a disc of NASA just with scenes of wallpaper on it and downloaded it.  These points of view, NASA, to another disc I changed once a week. I keep them in a separate folder named desktop wallpaper photos, in my position of photos. I went to change this view for weeks and not only discovered that all these photos have been in the display list folder / in Control Panel, but also all the pictures in the files of our holiday, which should have been in the image file in my documents. There are also pictures of my family photos files that are in the selection of wallpaper from the 'view' file in the documents.  I will return to my pictures folder and there not a file here for them, which means that it is not a copy of the file, but the actual file. I did not do in the lists of display/control panels. How can I remove or cut pictures that came the wallpaper display lists and put them in the my documents/images files where they should be. Tried to cut and paste functionality, but nothing of this nature appears.

  Hello

  Navigate to the folder where the photos are and then right-click on the image and click on copy and then open the folder My Documents/photo then right-click and press on paste.  Since you have a lot of picctures you can hold CTRL and left click each photo in this way they need only hit copy once.

   
  I hope this helps.

• Display the export value of the drop-down list instead of the element

  I'm showing the value to the export of a drop-down list instead of the selected option or the user selects BLACK, but the value of exports of BLK is actually displayed.  I can find many discussions on how to get the value of the exports and display it or use it to trigger another answer in another area and I can usually tweak my existing JavaScripts when I need something new, but I just can't wrap my head around this!

  This is my last attempt (failed)

  var f = this.getField ("eyes");

  If (event.value is 'Black - BLK')

  f.Value = "BLK".

  I use Acrobat PRO DC.

  Any help is appreciated,

  Thank you

  Xavier

  
  

  I've been doing this for a long time and have never heard of anyone who wants something like this, so it is interesting. Remove your current script and try the following script Format customized drop eyes:

  Custom drop-down list Format script

  Event.Value = event.target.getItemAt (event.target.currentValueIndices, true);

  This defines what is displayed in the drop-down list in the value of exports of the selected item. Select the 'Value selected to validate immediately' option to the drop-down list for smoother operation.