Display of connections in vista

Similar Questions

• No external display is connected?

  I tried to reach my dell inspiron 1545 to an external monitor, my tv using a HDMI VGA cable. But it just says: no external display is connected, I tried changing the settings I think but nothing seems to help. I tried to go the windows Mobility Center to connect it but it still says the same thing. Is there something I can do?

  Thank you very much

  Here is an article on how to connect a laptop to a TV that focuses on the proper cables and runing (I don't see one that you use mentoned, but which means not necessarily that it's the wrong cable - maybe it's just that the article did not consider such a cable when it was written): http://www.geekwithlaptop.com/how-to-connect-laptop-to-tv.

  Here is another article on the same topic, and once again, he seems to focus on using the correct and put cables on day of the dribers for yuur video card (which you should certainly do): http://www.techlore.com/article/10061/How-To-Connect-a-Computer-To-Your-TV/;jsessionid=1DE496C61344D19ABFF4EA7F26F289A3.

  Here is yet another article that also goies how to set display settings in the control panel: http://www.labnol.org/software/tutorials/how-to-connect-laptop-computer-tv-screen-lcd-hdtv/2331/.

  It seems to me that the problem is either the cable, you are usiing (most likely) or with the display settings on BOTH TV and laptop (don't forget the TV may need to be told to use the connection to the laptop using the options menu remotely or maybe controls on the front or the back of the TV - assuming that this is necessary with your TV (and it could be very welll)).  The setup of Vista is enough straightworward and changigg screens is relatively easy once the connection is established.   You must check in the right cable to use and whether or not the TV itself has settings that must be configured.  I would contact tech support of the TV manufacturer for help with these two questions - they can provide you with the answers you need or they can be of any help, but it's worth a try.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry Smartphones Blackberry Media Sync continues to display 'Please connect a Blackberry smart phone' when the Blackberry Storm is connected to the PC

  About a 2 months ago when I would like to connect my (the first storm) blackberry storm to my computer via the USB cable supplied with the phone, I was able to transfer music from my computer (itunes) to the blackberry via Blackberry Media Sync with no problems (open Blackberry Media Sync, connect blackberry to the computer via the USB port and screen Media Sync would change so that I could sync to the blackberry storm music). I didn't even have to install Blackberry Media Sync in December 2009

  But now after I connect my Blackberry Storm to my computer, the screen of Blackberry Media Sync does not change and continues to display "please connect a Blackberry smartphone. I tried these tips I found online:

  1.) several reboots my computer (windows vista)

  2.) update/reinstall Blackberry Media Sync, then by restarting my computer

  3.) reconnection from blackberry to the computer, then open Media Sync

  4.) Open Media Sync first and then connect the blackberry to the computer.

  5.) installation BlackBerry USB and Modem drivers (even if I can't find the USB driver for it under the Universal Serial Bus Controller when I check in the Device Manager when you go to control panel – system and Maintenance – Manager of devices, but I found a v2 COM4 and COM5 RIM virtual serial Port when you select "devices by connection" under display in Device Manager) or are RIM Serial Port virtual v2 COM4 and COM5 drivers I'm looking for?

  6.) go to Options (on blackberry) - memory and make sure Media Card Support, Media Transfer Protocol (MTO) and Mass Storage Mode Support are resolved on 'On', the encryption Mode is set to 'None' and mass storage Mode Auto activate when connected, it the value "Prompt" although I tried to 'Yes' as well. It says I have 785 MB of memory space of the unit out of 879 MB total memory of the device and 7.1 GB of free space on a total of 7.3 GB of Media Card Media Card.

  None of the above tips and troubleshooting tips worked. I also checked the Blackberry technical solution center but I've not found anything there that has contributed to the other. I found discussions forums online, including issues of people with 'blackberry media sync cannot connect to the device' pop up, but I have not had this pop-up. The Media Sync screen remains just the same as if I never connected the blackberry storm to my computer in the first place even if my blackberry storm recharges via the computer.

  Is there something that I miss or have not yet done? What should I do?

  Too bad. I went to a Verizon store and they me remove the battery and turn the blackberry. Worked like a charm and I can now use Media Sync.

  Also told me that I need to update the software of the phone blackberry using Blackberry Desktop software (I have version 4 and need to update to 5) and make sure to choose to back up files when you are prompted during the update or you will lose all files, the media and info saved on blackberry.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Error R6025 Runtime after connect you Vista - card Flash memory does not

  Hello
  I am a newbie & would appreciate any advice.

  I get a runtime R6025 error message when I connect Windows Vista.
  When I click out of the box, then I get a message saying Toshiba Flash Cards not working do not.

  I cancel that and my laptop is ok except that I don't know if the flashcard works or not because I don't know what he does.

  Sorry if I seem thick

  Thank you

  Neelie

  Hello Neelie

  Without much explanation here, in my opinion, you can try to resolve this problem if you remove the package of added value of the system (Control Panel > programs and features), restart your computer and install the latest version available on the Toshiba support page.

  You can find it under http://eu.computers.toshiba-europe.com > support & downloads.

• I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please

  I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please

  In short - you can't

  IF you have a computer with iTunes on which you did a prior backup - the phone will be recognized and iTunes offer todo backup before it clears your device - that - except if you know the access code the content cannot be saved

• Satellite A100 (PSAA9) Display Driver for Windows Vista

  Hello world

  This link does not work so I did not install my display driver for Windows Vista and system performance looks really terrible. I was wondering anyone use Satellite A100 (PSAA9) and Windows Vista. Because I was looking for this driver on the internet but I coudnt fint it anywere. This situation made me so sick.
  How to prevent or to send e-mail to the Toshiba customer support any link broken. Or anyome know address direct download for Vista driver? Please help me asap :(

  15/02/07 Windows Vista 97.54 nVidia display driver

  Thanks for your help,
  Mehmet in Istanbul

  Hello

  Try the driver nVidia for Satellite P100 (PSPA0E).
  nVidia drivers work for all their graphics chips.

  Good bye

• Satellite A200 - 23 k - view corruption during outdoor display is connected

  HY everybody :)
  If this problem occurs in 95% of the time when the external display is connected. Picture looks like it has some artifacts and color everything is blurred. ATI tools does not detect objects, and the system reboot or wake after sleep "solve" the problem.
  BIOS is the last, ram has been upgraded from 1 to 2 GB, there is no difference which is the OS or drivers are used (official or modded).

  EDIT: Not long ago I started playing battlefield2 and this happens often in this game, but in no other (HAWX for example)
  Edit2: this display corruption occurs only on the main screen, never on external.

  So any ideas on how to solve this problem?
  Thank you!!

  .

  .

  Hi Triu,
  you have changed the configuration of the internal display device?
  If you are exceeding the refresh rate of the strange things happen...
  Please try and use the driver from toshiba with the standard settings to test the system.

• When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#Cure please!"

  When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#".
  Cure please!

  Do you find it with other browsers?

  If not, then try asking using Firefox for a.

  That you get with other sites with Firefox?

• How do the PPPOE connection automatic connection on Vista

  Hello!

  I have the internet connection for PPPOE. It works fine, but I want to autoconnect when I start my PC.
  I tried to create a network connections shortcut and copy it to all the programs/startup.
  It did not work.

  Thank you!

  OK, try this. Open the Control Panel and select Internet Options > connections . Make sure your PPPoE connection is highlighted and always set the default connection is checked. This assumes that your PPPoE connection is your default value.

  See also the answer to a similar question for quite awhile in time...

  http://Forum.Soft32.com/Windows/auto-connection-Windows-Vista-log-ftopict376533.html

  Good luck... MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• Connect home Vista & Windows XP Media to the network... Help!

  What are the steps? I keep getting blocked and the message says to contact administrators, but it's us! What I am doing wrong?

  See the following thread that offers some good advice on how to set up:http://forums.techguy.org/networking/545552-how-do-i-network-my.html.

  Here is a generic Microsoft article on how to set up a home network: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is another article on the connection of Vista and XP together: http://www.informit.com/articles/article.aspx?p=1165037.

  Here's a last article on how to set up a network that covers the XP and Vista together among other options:http://www.practicallynetworked.com/sharing/vista/Vista_network_options.shtml.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not connect to Vista - connection failed user profile Service

  System message: user profile Service service has no connection

  User profile cannot be loaded.

  Help, please!

  Thank you very much

  Foam HB

  original message: can not connect to Vista

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• How to bypass the automatic connection in Vista. The SHIFT key after that logging does not work.

  I'll put up a laboratory of small kiosk for my students with a minimum account privs.  Sometimes I need to login with the administrator account to perform regular maintenance or solve a problem.  in xp, all I had to do was hold down the SHIFT key before the blue startup screen and all accounts (including my admin account) were visible.  This doesn't seem to work with vista.  is there a secret combo of keyboard shortcuts?  What should I do to ensure that both accounts visible?

  Hi Scentfromabove,

  Follow this step in order to bypass the automatic connection in vista.

  1. Click Start and type netplwiz in the start search box and press ENTER.
  2. check the users must enter a user name and password to use this computer
  3. click on apply and OK.

  I hope this helps.

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hello Sajid,

  The community here is about the countries United States, Canada and Asia-Pacific. Your DCR-TRV356E model is a model British camcorder.

  However, to answer your question,.

  The DCR-TRV356E USB streaming function is not compatible with the operating system Windows Vista and Windows 7. You can connect the camcorder to the computer using the A / V cable connection or using an i.Link cable.

  You can visit the European Forums of suggestions regarding the transfer of videos to Windows Vista or Windows 7 computer.

  http://www.Sony.co.UK/discussions/community/en/support/cameras_and_camcorders

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• HP G60 - 117US LAN adapt will not connect. Vista Ultimate. Manager displays without problem. Can connect wirelessly. Use Nvidia MCP77MV chipset__

  My laptop will be wired adapter not connecting, Device Manager shows no problems

  Hi Baker,

  (a) if it works well before? You get a specific error message?

  (b) don't you recall making any changes to the computer before this happened?

  Connect the laptop to access the internet cable and then try to follow the steps:

  Step 1: check if you are able to receive the IP (Internet protocol) address, run Ipconfig/all at the command prompt.

  Click Start, run, type "cmd" (without the quotation marks), and then click OK to open a MS-DOS command line window. Type "ipconfig/all" (without the quotation marks), and then press the ENTER key.

  ·         Do you have an IP address?

  ·         You get the addressing APIPA (automatic private IP addressing)?

  Ø If the line "Autoconfiguration Enabled' says 'Yes', the 'Auto-configuration IP address' is 169.254.x.y (where x.y is the unique client identifier), then the computer is using AUTOMATIC private IP addressing.

  Ø If the line "Autoconfiguration Enabled' says 'No', while the computer does not currently use AUTOMATIC private IP addressing.

  Note:  With APIPA, DHCP (Dynamic host configuration protocol protocol) clients can be automatically configure an IP address (Internet protocol) address and subnet mask when a DHCP server is not available.

  If you cannot assign an IP address and then try step 2

  Step 2: disable the DHCP (Dynamic host configuration protocol protocol) Broadcast Flag:

   

  Run the fixit available in the link below to disable the DHCP broadcast flag

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/default.aspx/KB/928233/en-us

   

   

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

   

  Let us know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.