Display of vCenter Ops in an AC on multiple monitors / TV - need ideas

Similar Questions

• version of vCenter Ops 5 Enterprise Windows - how to connect to vCenter Server?

  IM stumped...

  Ive installed vCenter Ops Enterprise edition on a Server Windows, its place and work.

  The next step for me would be to point to our vCenter servers... I can't understand how do... anyone done this?

  I need a reading vCenter server adapter, but I can't seem to a fine.

  John, file a support request... Apparently, he must get to you.

• Display problems when you run applications JavaFX 2.0 with multiple monitors

  I noticed a number of issues when running JavaFX 2.X applications on a system with multiple monitors. My setup consists of 2 monitors (primary and secondary on a dual graphics card) and my third on a separate graphics card.
  
  The questions I have observed are,
  
  (1) the application is not too sensitive when running on the second or third monitor.
  
  (2) when the application runs on 2 monitors and re-tire it will only redraw correctly on one of the monitors. The application will be displayed as a black box on the another moniter
  
  (3) where the application does not run on the primary monitor and a ChoiceBox is selected choice appears as expected but it blackens the application in the background.
  
  Someone else encountered similar problems? I'm going to raise a JIRA with screenshots and details of my system if other people are able to confirm that they are also suffering from similar problems.

  Hi, I had similar problems. My application uses 2 monitors and now everything works just perfect. It turned out that the interface is causing these disorders. I changed mine, then he worked (actually more the new installed I also had to update the driver for the new interface)

• vCenter Ops Cogs are grayed Out

  Beginner question complete. My Ops vCenter worked well until recently when all teeth becomes grey without data as see you in the screenshot below. My guess is that it is unhappy with the service used account. I want to change that, but I can't seem to find a way to return to the Setup screen where enter you vCOPs with a vCenter Server! I was convinced that it was in the Web page interface, but apparently not.

  So two questions...

  (1) this seems to be the issue at first glance?

  (2) if so, how do the config to change this?

  

  Thank you!

  Hello.

  1. perhaps?

  2 - https://SERVERNAME/adminMain.action

  Good luck!

• Change the default Web pages display in vCenter Orchestrator

  , I've been dev tests vCenter Orchestrator for BYU and have aired on a question. Recently, I ran across a tutorial posted on the website of the vCO team (http://www.vcoteam.info/learn-vco/create-a-simple-vco-self-service-vm-provisioning-portal-part-2.html). I also have a display of Web pages can I customize myself (because you can't do this at weboperator).

  The problem that I am running is the following. I've traveled MY CUSTOM web display to run a workflow (in this case to set up a virtual machine), and he asks to my e-mail to e-mail account. By clicking on review and approve the application, it automatically attempts to call the display of pages web weboperator (that I don't have published and will not be published).

  What I want to know is how have Orchestrator call MY display of webpages of these interactions, as I intend to do some customization on my display of web pages.

  Thank you!

  Part 3 of our series was published today and walks you step by step through the process.

  Visit me on http://www.vcoteam.info for vCenter Orchestrator tips and tutorials

• A virtual existing and running computer does not display in vCenter

  Hi all

  I have a special situation. We have 47 VMs on our farm in VMware. I've been tweaking a virtual machine dedicated to WSUS. I can access it via RDP, configure the settings and so on. For some reason, I needed to return to vCenter to verify some specifications on and do not see it...! How is that possible? I can see a list of all virtual machines in alphabetical order, but I can't find the that I was working on that is still running.

  Anyone know why this behavior? Anyone knows how to appear again in vCenter? It's really weird and I'd never seen it before.

  I thank you and appreciate your cooperation.

  Download RVTOOLS and check if you can see it...

  Here, you can also sort alphabetical...

  Another possibility would be Powercli: Get - VM *.

  Have you already rebooted the server vCenter Server? Also try to do.

  Maybe you can stop the virtual machine and then it readd to the inventory by browsing the data store and selecting the vmx file...

• Authentication service UNIQUE vCenter server is not displayed in vcenter server

  Hello

  We have installed SSO in vCenter server but the SSO is service not no projection in vCenter server. When I try to reinstall its choice of shows to remove only.

  Need help solve this problem.

  Thank you

  vm2014

  Please take a look at Re: vCenter service Single Sign On who can answer the question.

  André

• vCenter Ops Manager 5.6 with several stand-alone vCenters?

  We select various tools for monitoring my team and I have been instructed to resist an instance of vCOPs fast 5.6.  I deployed the vapp and applied the enterprise license key we have for assessment. I can add all vCenters within the environment and the UI shows they are connected and registered, but when I connect on the VI client and view of the plugin... I only see one of the vCenters (where the VAPP has been deployed) in the navigation tree.  VCOPs 5.6 only supports adding multiple vCenters in bound mode?  I can't find anything about the self-governments.

  It's vCOPs Manager 5.6 under vCenter 5.0.  Thank you for the insight.

  You'll want to connect the vSphere vcOps UI, not the VI client to see vCenters all connected. Try http://vcopsUIhost/vcops-vsphere

• Any attempt to vCenter OPS 5.7 installation.

  All the:

  I try to install vcOPS 5.7 in our environment. When you browse the OVF Deployment Wizard I get error that "the operation is not supported on the object", when selecting a host for placing the vAPP on?

  I'm installing on a host running ESXi 5.1.0 1117900.

  The host is part of our cluster. DRS is not on. Must be for it to install?

  Any help is much appreciated!

  I was able to successfully install vcOPS. I had to follow the article KB 2017464.

  Problem solved.

• M30 display on multiple monitors, the office as it is.

  I have a problem with the desktop exactly seen on the desktop on another monitor to display. When I press ctrl + F5, and then select the two crt and laptop lcd, crt screen is totally out of sync. I tried different monitors, LCDs, with different properties of the resolution. I've updated the drivers. Still the same problem. The kicker is this, attach and display my desktop to another monitor works. It identifies correctly, and the resolution is correct. However do a mirror of my office does not work. Any help would be much appreciated.

  Sincerely,

  KEB

  Hello

  have you enabled NView desktop management and checked the settings it?

  You could also checked the settings of display properties (right click on the desktop and properties), go to options and then advanced GeForce 5200...

  There you set if DualView is set to CLONE or STANDARD.

  Tom

• Display drivers crashing when connecting Skype with a new monitor BenQ

  Hello, so I just got a new BenQ XL2411Z monitor and for some reason, when I connect on Skype, display drivers crash 9/10 times. If I use the old monitor and launch Skype everything works normally, but display runnning drivers the new BenQ it will crash. The only time where he didn't plant and I could make a call and play a game at the same time, when I open a video on youtube screen crashed again.

  OK so I figured out it was actually because my refresh rate is 144 Hz and Skype + amd drivers can't handle anything beyond 120 Hz. Now running at 120 Hz and it works completely fine, had nothing to do with the drivers or the version of Skype.

• Multiple monitors / displays on y560 (win7) - total 3 screens

  Is there a way to output to 2 monitors outside the laptop screen?

  I thought for sure it would be sustained but I can't get it to do any 2 of the 3.

  I wish I could keep my laptop usable and also 2 external monitors with VGA and HDMI output.

  Any ideas? Is this possible?

  
  

  I'm on Y560, Windows 7, 64-bit, 8 GB RAM, ATI Mobile Radeon HD 5730.

  This term describes a computer with a single graphics card that has two outputs video. This type of adapter is also known as a graphics card double head. many graphics cards have a dvi output and a vga output.

  Take a look at this thread on the double display.

• Turn off the display on 20 minutes after no response on the monitor

  I have this weird problem my computer power setting defined as about 20 minutes after the display display off turn off when you try to move the mouse and the keyboard he still see the no screen (still running fine PC no screen but no response). Meanwhile, I restart my com and still no screen (PC still works very well at the moment) but I can hear on the background when windows starts. The most amazing thing is "I HAVE FOR THE COOLING SYSTEM AND offshore power ABOUT 20 minutes, THEN IT WILL RETURN BACK MY SCREEN MONITOR".

  Hardware specification

  Model of motherboard Asus P5G41-MLX

  Intel dual core 2

  Kingdom of RAM DD2 - 4 G

  ASUS EN9500GT 1 G graphics card

  I need expertise to solve the problem of e. thanks!

  Looks like the graphics card is overheating.  Check all fans of the system work, particularly that of the graphic card.

• I'm unable to display links to an online class in Media Player, says I need to configure the proxy settings

  I'm the unab to display links to an online class. Media Player opens, then he said that I need c alter my internet proxy settings. What should I do?

  Hello

  What is the exact error message when you try to open links through Windows Media Player?

  Check your proxy server settings and check if that helps.

  (a) on the Tools menu, click Options and then click the network tab.

  (b) check your settings in the Streaming proxy settings area.

  Notes:

  ·         If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure and select

  ·         Automatically detect the proxy settings or use the proxy settings of the browser (available for HTTP protocol only).

  ·         If you are connected to the Internet via a dial-up connection, you may not be able to choose the proxy server. For more information,.

• Multiple monitors in the problem. External monitor display full desktop but no video in windows media player.

  I plugged a LCD TV to my laptop using a VGA cable. LCD TV display the full desktop.

  When I play a video in Windows Media Player video area is not displayed on the LCD screen, the rest all is shown.

  When I ran the player VLC video did not show, but when I changed the video option "overlay video output" i.e disabled this option, the video was shown on the LCD.

  But there is no option in WMP. How in WMP?

  What is the problem?

  Maryse Agarwal

  not a driver problem

  found the solution, I used both the computer laptop lcd and the external monitor

  When I went just outside, he played

  This is because the graphics card offers support for playback of the video when you play the video on the internal monitor

  Maryse Agarwal